Skip to content

L
linux
Switch branch/tag
  1. 03 Nov, 2015 11 commits
    • David S. Miller's avatar
      Merge branch 'bonding-actor-updates' · a176ded3
      David S. Miller authored 
      Mahesh Bandewar says:

====================
re-org actor admin/oper key updates

I was observing machines entering into weird LACP state when the
partner is in passive mode. This issue is not because of the partners
in passive state but probably because of some operational key update
which is pushing the state-machine is that weird state. This was
happening randomly on about 1% of the machine (when the sample size
is a large set of machines with a variety of NICs/ports bonded).

In this patch-series I'm attempting to unify the logic of actor-key
/ operational-key changes to one place to avoid possible errors in
update. Also this eliminates the need for the event-handler to decide
if the key needs update.

After this patch-set none of the machines (from same sample set) were
exhibiting LACP-weirdness that was observed earlier.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a176ded3
    • Mahesh Bandewar's avatar
      bonding: simplify / unify event handling code for 3ad mode. · 52bc6716
      Mahesh Bandewar authored 
      Old logic of updating state-machine is not required since
ad_update_actor_keys() does it implicitly. The only loss is
the notification differentiation between speed vs. duplex
change. Now only one unified notification is printed.
Signed-off-by: default avatarMahesh Bandewar <maheshb@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      52bc6716
    • Mahesh Bandewar's avatar
      bonding: unify all places where actor-oper key needs to be updated. · 7bb11dc9
      Mahesh Bandewar authored 
      actor_admin, and actor_oper key is changed at multiple locations in
the code. This patch brings all those updates into one location in
an attempt to avoid possible inconsistent updates causing LACP state
machine to go in weird state.

The unified place is ad_update_actor_key() with simple state-machine
logic -
  (a) If port is "duplex" then only it can participate in LACP
  (b) Speed change reinitializes the LACP state-machine.
Signed-off-by: default avatarMahesh Bandewar <maheshb@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7bb11dc9
    • Mahesh Bandewar's avatar
      bonding: Simplify __get_duplex function. · b25c2e7d
      Mahesh Bandewar authored 
      Eliminate 'else' clause by simply initializing variable
Signed-off-by: default avatarMahesh Bandewar <maheshb@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b25c2e7d
    • David S. Miller's avatar
      Merge branch 'bpf-persistent' · 12d43096
      David S. Miller authored 
      Daniel Borkmann says:

====================
BPF updates

This set adds support for persistent maps/progs. Please see
individual patches for further details. A man-page update
to bpf(2) will be sent later on, also a iproute2 patch for
support in tc.

v1 -> v2:
  - Reworked most of patch 4 and 5
  - Rebased to latest net-next
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      12d43096
    • Daniel Borkmann's avatar
      bpf: add sample usages for persistent maps/progs · 42984d7c
      Daniel Borkmann authored 
      This patch adds a couple of stand-alone examples on how BPF_OBJ_PIN
and BPF_OBJ_GET commands can be used.

Example with maps:

  # ./fds_example -F /sys/fs/bpf/m -P -m -k 1 -v 42
  bpf: map fd:3 (Success)
  bpf: pin ret:(0,Success)
  bpf: fd:3 u->(1:42) ret:(0,Success)
  # ./fds_example -F /sys/fs/bpf/m -G -m -k 1
  bpf: get fd:3 (Success)
  bpf: fd:3 l->(1):42 ret:(0,Success)
  # ./fds_example -F /sys/fs/bpf/m -G -m -k 1 -v 24
  bpf: get fd:3 (Success)
  bpf: fd:3 u->(1:24) ret:(0,Success)
  # ./fds_example -F /sys/fs/bpf/m -G -m -k 1
  bpf: get fd:3 (Success)
  bpf: fd:3 l->(1):24 ret:(0,Success)

  # ./fds_example -F /sys/fs/bpf/m2 -P -m
  bpf: map fd:3 (Success)
  bpf: pin ret:(0,Success)
  # ./fds_example -F /sys/fs/bpf/m2 -G -m -k 1
  bpf: get fd:3 (Success)
  bpf: fd:3 l->(1):0 ret:(0,Success)
  # ./fds_example -F /sys/fs/bpf/m2 -G -m
  bpf: get fd:3 (Success)

Example with progs:

  # ./fds_example -F /sys/fs/bpf/p -P -p
  bpf: prog fd:3 (Success)
  bpf: pin ret:(0,Success)
  bpf sock:4 <- fd:3 attached ret:(0,Success)
  # ./fds_example -F /sys/fs/bpf/p -G -p
  bpf: get fd:3 (Success)
  bpf: sock:4 <- fd:3 attached ret:(0,Success)

  # ./fds_example -F /sys/fs/bpf/p2 -P -p -o ./sockex1_kern.o
  bpf: prog fd:5 (Success)
  bpf: pin ret:(0,Success)
  bpf: sock:3 <- fd:5 attached ret:(0,Success)
  # ./fds_example -F /sys/fs/bpf/p2 -G -p
  bpf: get fd:3 (Success)
  bpf: sock:4 <- fd:3 attached ret:(0,Success)
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      42984d7c
    • Daniel Borkmann's avatar
      bpf: add support for persistent maps/progs · b2197755
      Daniel Borkmann authored 
      This work adds support for "persistent" eBPF maps/programs. The term
"persistent" is to be understood that maps/programs have a facility
that lets them survive process termination. This is desired by various
eBPF subsystem users.

Just to name one example: tc classifier/action. Whenever tc parses
the ELF object, extracts and loads maps/progs into the kernel, these
file descriptors will be out of reach after the tc instance exits.
So a subsequent tc invocation won't be able to access/relocate on this
resource, and therefore maps cannot easily be shared, f.e. between the
ingress and egress networking data path.

The current workaround is that Unix domain sockets (UDS) need to be
instrumented in order to pass the created eBPF map/program file
descriptors to a third party management daemon through UDS' socket
passing facility. This makes it a bit complicated to deploy shared
eBPF maps or programs (programs f.e. for tail calls) among various
processes.

We've been brainstorming on how we could tackle this issue and various
approches have been tried out so far, which can be read up further in
the below reference.

The architecture we eventually ended up with is a minimal file system
that can hold map/prog objects. The file system is a per mount namespace
singleton, and the default mount point is /sys/fs/bpf/. Any subsequent
mounts within a given namespace will point to the same instance. The
file system allows for creating a user-defined directory structure.
The objects for maps/progs are created/fetched through bpf(2) with
two new commands (BPF_OBJ_PIN/BPF_OBJ_GET). I.e. a bpf file descriptor
along with a pathname is being passed to bpf(2) that in turn creates
(we call it eBPF object pinning) the file system nodes. Only the pathname
is being passed to bpf(2) for getting a new BPF file descriptor to an
existing node. The user can use that to access maps and progs later on,
through bpf(2). Removal of file system nodes is being managed through
normal VFS functions such as unlink(2), etc. The file system code is
kept to a very minimum and can be further extended later on.

The next step I'm working on is to add dump eBPF map/prog commands
to bpf(2), so that a specification from a given file descriptor can
be retrieved. This can be used by things like CRIU but also applications
can inspect the meta data after calling BPF_OBJ_GET.

Big thanks also to Alexei and Hannes who significantly contributed
in the design discussion that eventually let us end up with this
architecture here.

Reference: https://lkml.org/lkml/2015/10/15/925Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b2197755
    • Daniel Borkmann's avatar
      bpf: consolidate bpf_prog_put{, _rcu} dismantle paths · e9d8afa9
      Daniel Borkmann authored 
      We currently have duplicated cleanup code in bpf_prog_put() and
bpf_prog_put_rcu() cleanup paths. Back then we decided that it was
not worth it to make it a common helper called by both, but with
the recent addition of resource charging, we could have avoided
the fix in commit ac00737f ("bpf: Need to call bpf_prog_uncharge_memlock
from bpf_prog_put") if we would have had only a single, common path.
We can simplify it further by assigning aux->prog only once during
allocation time.
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e9d8afa9
    • Daniel Borkmann's avatar
      bpf: align and clean bpf_{map,prog}_get helpers · c2101297
      Daniel Borkmann authored 
      Add a bpf_map_get() function that we're going to use later on and
align/clean the remaining helpers a bit so that we have them a bit
more consistent:

  - __bpf_map_get() and __bpf_prog_get() that both work on the fd
    struct, check whether the descriptor is eBPF and return the
    pointer to the map/prog stored in the private data.

    Also, we can return f.file->private_data directly, the function
    signature is enough of a documentation already.

  - bpf_map_get() and bpf_prog_get() that both work on u32 user fd,
    call their respective __bpf_map_get()/__bpf_prog_get() variants,
    and take a reference.
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c2101297
    • Daniel Borkmann's avatar
      bpf: abstract anon_inode_getfd invocations · aa79781b
      Daniel Borkmann authored 
      Since we're going to use anon_inode_getfd() invocations in more than just
the current places, make a helper function for both, so that we only need
to pass a map/prog pointer to the helper itself in order to get a fd. The
new helpers are called bpf_map_new_fd() and bpf_prog_new_fd().
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      aa79781b
    • Eric Dumazet's avatar
      net: fix percpu memory leaks · 1d6119ba
      Eric Dumazet authored 
      This patch fixes following problems :

1) percpu_counter_init() can return an error, therefore
  init_frag_mem_limit() must propagate this error so that
  inet_frags_init_net() can do the same up to its callers.

2) If ip[46]_frags_ns_ctl_register() fail, we must unwind
   properly and free the percpu_counter.

Without this fix, we leave freed object in percpu_counters
global list (if CONFIG_HOTPLUG_CPU) leading to crashes.

This bug was detected by KASAN and syzkaller tool
(http://github.com/google/syzkaller)

Fixes: 6d7b857d ("net: use lib/percpu_counter API for fragmentation mem accounting")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1d6119ba
  3. 02 Nov, 2015 17 commits
  5. 01 Nov, 2015 10 commits
  7. 31 Oct, 2015 2 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7