- 28 Sep, 2017 9 commits
-
-
Masami Hiramatsu authored
Kkprobes don't need to disable IRQs if they are called from the ftrace/jump trampoline code, because Documentation/kprobes.txt says: ----- Probe handlers are run with preemption disabled. Depending on the architecture and optimization state, handlers may also run with interrupts disabled (e.g., kretprobe handlers and optimized kprobe handlers run without interrupt disabled on x86/x86-64). ----- So let's remove IRQ disabling from those handlers. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexei Starovoitov <ast@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/150581534039.32348.11331736206004264553.stgit@devboxSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Masami Hiramatsu authored
Disable preemption in ftrace-based jprobe handlers as described in Documentation/kprobes.txt: "Probe handlers are run with preemption disabled." This will fix jprobes behavior when CONFIG_PREEMPT=y. Signed-off-by:
-
Masami Hiramatsu authored
Disable preemption in optprobe handler as described in Documentation/kprobes.txt, which says: "Probe handlers are run with preemption disabled." Signed-off-by:
-
Masami Hiramatsu authored
Warn if optprobe handler tries to change execution path. As described in Documentation/kprobes.txt, with optprobe user handler can not change instruction pointer. In that case user must avoid optimizing the kprobes by setting post_handler or break_handler. Signed-off-by:
-
Masami Hiramatsu authored
Since get_kprobe_ctlblk() accesses per-cpu variables which calls smp_processor_id(), it must be called under preempt-disabled or irq-disabled. Signed-off-by:
-
Masami Hiramatsu authored
Add preemptible check to each handler. Handlers are called with non-preemtible, which is guaranteed by Documentation/kprobes.txt. Signed-off-by:
-
Masami Hiramatsu authored
The following commit: 54a7d50b ("x86: mark kprobe templates as character arrays, not single characters") changed optprobe_template_* to arrays, so we can remove the addressof() operators from those symbols. Signed-off-by:
-
Masami Hiramatsu authored
Make insn buffer always ROX and use text_poke() to write the copied instructions instead of set_memory_*(). This makes instruction buffer stronger against other kernel subsystems because there is no window time to modify the buffer. Suggested-by:
-
Ingo Molnar authored
Signed-off-by:
-
- 27 Sep, 2017 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull quota and isofs fixes from Jan Kara: "Two quota fixes (fallout of the quota locking changes) and an isofs build fix" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Fix quota corruption with generic/232 test isofs: fix build regression quota: add missing lock into __dquot_transfer()
-
Linus Torvalds authored
Merge tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "This update consists of: - fixes to several existing tests - a test for regression introduced by b9470c27 ("inet: kill smallest_size and smallest_port") - seccomp support for glibc 2.26 siginfo_t.h - fixes to kselftest framework and tests to run make O=dir use-case - fixes to silence unnecessary test output to de-clutter test results" * tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (28 commits) selftests: timers: set-timer-lat: Fix hang when testing unsupported alarms selftests: timers: set-timer-lat: fix hang when std out/err are redirected selftests/memfd: correct run_tests.sh permission selftests/seccomp: Support glibc 2.26 siginfo_t.h selftests: futex: Makefile: fix for loops in targets to run silently selftests: Makefile: fix for loops in targets to run silently selftests: mqueue: Use full path to run tests from Makefile selftests: futex: copy sub-dir test scripts for make O=dir run selftests: lib.mk: copy test scripts and test files for make O=dir run selftests: sync: kselftest and kselftest-clean fail for make O=dir case selftests: sync: use TEST_CUSTOM_PROGS instead of TEST_PROGS selftests: lib.mk: add TEST_CUSTOM_PROGS to allow custom test run/install selftests: watchdog: fix to use TEST_GEN_PROGS and remove clean selftests: lib.mk: fix test executable status check to use full path selftests: Makefile: clear LDFLAGS for make O=dir use-case selftests: lib.mk: kselftest and kselftest-clean fail for make O=dir case Makefile: kselftest and kselftest-clean fail for make O=dir case selftests/net: msg_zerocopy enable build with older kernel headers selftests: actually run the various net selftests selftest: add a reuseaddr test ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fpu fixes and cleanups from Ingo Molnar: "This is _way_ more cleanups than fixes, but the bugs were subtle and hard to hit, and the primary reason for them existing was the unnecessary historical complexity of some of the x86/fpu interfaces. The first bunch of commits clean up and simplify the xstate user copy handling functions, in reaction to the collective head-scratching about the xstate user-copy handling code that leads up to the fix for this SkyLake xstate handling bug: 0852b374: x86/fpu: Add FPU state copying quirk to handle XRSTOR failure on Intel Skylake CPUs The cleanups don't change any functionality, they just (hopefully) make it all clearer, more consistent, more debuggable and more robust. Note that most of the linecount increase comes from these commits, where we better split the user/kernel copy logic by having more variants, instead repeated fragile patterns of: if (kbuf) { memcpy(kbuf + pos, data, copy); } else { if (__copy_to_user(ubuf + pos, data, copy)) return -EFAULT; } The next bunch of commits simplify the FPU state-machine to get rid of old lazy-FPU idiosyncrasies - a defensive simplification to make all the code easier to review and fix. No change in functionality. Then there's a couple of additional debugging tweaks: static checker warning fix and move an FPU related warning to under WARN_ON_FPU(), followed by another bunch of commits that represent a finegrained split-up of the fixes from Eric Biggers to handle weird xstate bits properly. I did this finegrained split-up because some of these fixes also impact the ABI for weird xstate handling, for which we'd like to have good bisection results, should they cause any problems. (We also had one regression with the more monolithic fixes, so splitting it all up sounded prudent for robustness reasons as well.) About the whole series: the commits up to 03eaec81 have been in -next for months - but I've recently rebased them to remove a state machine clean-up commit that was objected to, and to make it more bisectable - so technically it's a new, rebased tree. Robustness history: this series had some regressions along the way, and all reported regressions have been fixed. All but one of the regressions manifested itself as easy to report warnings. The previous version of this latest series was also in linux-next, with one (warning-only) regression reported which is fixed in the latest version. Barring last minute brown paper bag bugs (and the commits are now older by a day which I'd hope helps paperbag reduction), I'm reasonably confident about its general robustness. Famous last words ..." * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits) x86/fpu: Use using_compacted_format() instead of open coded X86_FEATURE_XSAVES x86/fpu: Use validate_xstate_header() to validate the xstate_header in copy_user_to_xstate() x86/fpu: Eliminate the 'xfeatures' local variable in copy_user_to_xstate() x86/fpu: Copy the full header in copy_user_to_xstate() x86/fpu: Use validate_xstate_header() to validate the xstate_header in copy_kernel_to_xstate() x86/fpu: Eliminate the 'xfeatures' local variable in copy_kernel_to_xstate() x86/fpu: Copy the full state_header in copy_kernel_to_xstate() x86/fpu: Use validate_xstate_header() to validate the xstate_header in __fpu__restore_sig() x86/fpu: Use validate_xstate_header() to validate the xstate_header in xstateregs_set() x86/fpu: Introduce validate_xstate_header() x86/fpu: Rename fpu__activate_fpstate_read/write() to fpu__prepare_[read|write]() x86/fpu: Rename fpu__activate_curr() to fpu__initialize() x86/fpu: Simplify and speed up fpu__copy() x86/fpu: Fix stale comments about lazy FPU logic x86/fpu: Rename fpu::fpstate_active to fpu::initialized x86/fpu: Remove fpu__current_fpstate_write_begin/end() x86/fpu: Fix fpu__activate_fpstate_read() and update comments x86/fpu: Reinitialize FPU registers if restoring FPU state fails x86/fpu: Don't let userspace set bogus xcomp_bv x86/fpu: Turn WARN_ON() in context switch into WARN_ON_FPU() ... -
Jan Kara authored
Eric has reported that since commit d2faa415 "quota: Do not acquire dqio_sem for dquot overwrites in v2 format" test generic/232 occasionally fails due to quota information being incorrect. Indeed that commit was too eager to remove dqio_sem completely from the path that just overwrites quota structure with updated information. Although that is innocent on its own, another process that inserts new quota structure to the same block can perform read-modify-write cycle of that block thus effectively discarding quota information update if they race in a wrong way. Fix the problem by acquiring dqio_sem for reading for overwrites of quota structure. Note that it *is* possible to completely avoid taking dqio_sem in the overwrite path however that will require modifying path inserting / deleting quota structures to avoid RMW cycles of the full block and for now it is not clear whether it is worth the hassle. Fixes: d2faa415Reported-and-tested-by:
Eric Whitney <enwlinux@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz>
-
- 26 Sep, 2017 22 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: - sdhci-pci: Fix voltage switch for some Intel host controllers - tmio: remove broken and noisy debug macro * tag 'mmc-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-pci: Fix voltage switch for some Intel host controllers mmc: tmio: remove broken and noisy debug macro
-
Andreas Gruenbacher authored
In generic_file_llseek_size, return -ENXIO for negative offsets as well as offsets beyond EOF. This affects filesystems which don't implement SEEK_HOLE / SEEK_DATA internally, possibly because they don't support holes. Fixes xfstest generic/448. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ingo Molnar authored
Signed-off-by: -
Eric Biggers authored
This is the canonical method to use. Signed-off-by:
Eric Biggers <ebiggers@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kevin Hao <haokexin@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Halcrow <mhalcrow@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Cc: kernel-hardening@lists.openwall.com Link: http://lkml.kernel.org/r/20170924105913.9157-11-mingo@kernel.orgSigned-off-by:
-
Eric Biggers authored
Tighten the checks in copy_user_to_xstate(). Signed-off-by:
-
Eric Biggers authored
We now have this field in hdr.xfeatures. Signed-off-by:
-
Eric Biggers authored
This is in preparation to verify the full xstate header as supplied by user-space. Signed-off-by:
-
Eric Biggers authored
Tighten the checks in copy_kernel_to_xstate(). Signed-off-by:
-
Eric Biggers authored
We have this information in the xstate_header. Signed-off-by:
-
Eric Biggers authored
This is in preparation to verify the full xstate header as supplied by user-space. Signed-off-by:
-
Eric Biggers authored
Tighten the checks in __fpu__restore_sig() and update comments. Signed-off-by:
-
Eric Biggers authored
Tighten the checks in xstateregs_set(). Signed-off-by:
-
Eric Biggers authored
Move validation of user-supplied xstate_header into a helper function, in preparation of calling it from both the ptrace and sigreturn syscall paths. The new function also considers it to be an error if *any* reserved bits are set, whereas before we were just clearing most of them silently. This should reduce the chance of bugs that fail to correctly validate user-supplied XSAVE areas. It also will expose any broken userspace programs that set the other reserved bits; this is desirable because such programs will lose compatibility with future CPUs and kernels if those bits are ever used for anything. (There shouldn't be any such programs, and in fact in the case where the compacted format is in use we were already validating xfeatures. But you never know...) Signed-off-by:
-
Ingo Molnar authored
As per the new nomenclature we don't 'activate' the FPU state anymore, we initialize it. So drop the _activate_fpstate name from these functions, which were a bit of a mouthful anyway, and name them: fpu__prepare_read() fpu__prepare_write() Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: -
Ingo Molnar authored
Rename this function to better express that it's all about initializing the FPU state of a task which goes hand in hand with the fpu::initialized field. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Link: http://lkml.kernel.org/r/20170923130016.21448-33-mingo@kernel.orgSigned-off-by:
-
Ingo Molnar authored
fpu__copy() has a preempt_disable()/enable() pair, which it had to do to be able to atomically unlazy the current task when doing an FNSAVE. But we don't unlazy tasks anymore, we always do direct saves/restores of FPU context. So remove both the unnecessary critical section, and update the comments. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Link: http://lkml.kernel.org/r/20170923130016.21448-32-mingo@kernel.orgSigned-off-by:
-
Ingo Molnar authored
We don't do any lazy restore anymore, what we have are two pieces of optimization: - no-FPU tasks that don't save/restore the FPU context (kernel threads are such) - cached FPU registers maintained via the fpu->last_cpu field. This means that if an FPU task context switches to a non-FPU task then we can maintain the FPU registers as an in-FPU copies (cache), and skip the restoration of them once we switch back to the original FPU-using task. Update all the comments that still referred to old 'lazy' and 'unlazy' concepts. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Link: http://lkml.kernel.org/r/20170923130016.21448-31-mingo@kernel.orgSigned-off-by:
-
Ingo Molnar authored
The x86 FPU code used to have a complex state machine where both the FPU registers and the FPU state context could be 'active' (or inactive) independently of each other - which enabled features like lazy FPU restore. Much of this complexity is gone in the current code: now we basically can have FPU-less tasks (kernel threads) that don't use (and save/restore) FPU state at all, plus full FPU users that save/restore directly with no laziness whatsoever. But the fpu::fpstate_active still carries bits of the old complexity - meanwhile this flag has become a simple flag that shows whether the FPU context saving area in the thread struct is initialized and used, or not. Rename it to fpu::initialized to express this simplicity in the name as well. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Link: http://lkml.kernel.org/r/20170923130016.21448-30-mingo@kernel.orgSigned-off-by:
-
Ingo Molnar authored
These functions are not used anymore, so remove them. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Link: http://lkml.kernel.org/r/20170923130016.21448-29-mingo@kernel.orgSigned-off-by:
-
Ingo Molnar authored
fpu__activate_fpstate_read() can be called for the current task when coredumping - or for stopped tasks when ptrace-ing. Implement this properly in the code and update the comments. This also fixes an incorrect (but harmless) warning introduced by one of the earlier patches. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Link: http://lkml.kernel.org/r/20170923130016.21448-28-mingo@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull compat fix from Al Viro: "I really wish gcc warned about conversions from pointer to function into void *..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix a typo in put_compat_shm_info()
-
Al Viro authored
"uip" misspelled as "up"; unfortunately, the latter happens to be a function and gcc is happy to convert it to void *... Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
- 25 Sep, 2017 5 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - Two sets of NVMe pull requests from Christoph: - Fixes for the Fibre Channel host/target to fix spec compliance - Allow a zero keep alive timeout - Make the debug printk for broken SGLs work better - Fix queue zeroing during initialization - Set of RDMA and FC fixes - Target div-by-zero fix - bsg double-free fix. - ndb unknown ioctl fix from Josef. - Buffered vs O_DIRECT page cache inconsistency fix. Has been floating around for a long time, well reviewed. From Lukas. - brd overflow fix from Mikulas. - Fix for a loop regression in this merge window, where using a union for two members of the loop_cmd turned out to be a really bad idea. From Omar. - Fix for an iostat regression fix in this series, using the wrong API to get at the block queue. From Shaohua. - Fix for a potential blktrace delection deadlock. From Waiman. * 'for-linus' of git://git.kernel.dk/linux-block: (30 commits) nvme-fcloop: fix port deletes and callbacks nvmet-fc: sync header templates with comments nvmet-fc: ensure target queue id within range. nvmet-fc: on port remove call put outside lock nvme-rdma: don't fully stop the controller in error recovery nvme-rdma: give up reconnect if state change fails nvme-core: Use nvme_wq to queue async events and fw activation nvme: fix sqhd reference when admin queue connect fails block: fix a crash caused by wrong API fs: Fix page cache inconsistency when mixing buffered and AIO DIO nvmet: implement valid sqhd values in completions nvme-fabrics: Allow 0 as KATO value nvme: allow timed-out ios to retry nvme: stop aer posting if controller state not live nvme-pci: Print invalid SGL only once nvme-pci: initialize queue memory before interrupts nvmet-fc: fix failing max io queue connections nvme-fc: use transport-specific sgl format nvme: add transport SGL definitions nvme.h: remove FC transport-specific error values ... -
Linus Torvalds authored
Merge tag 'gfs2-for-linus-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fix from Bob Peterson: "GFS2: Fix an old regression in GFS2's debugfs interface This fixes a regression introduced by commit 88ffbf3e ("GFS2: Use resizable hash table for glocks"). The regression caused the glock dump in debugfs to not report all the glocks, which makes debugging extremely difficult" * tag 'gfs2-for-linus-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Fix debugfs glocks dump
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull Microblaze fixes from Michal Simek: - Kbuild fix - use vma_pages - setup default little endians * tag 'microblaze-4.14-rc3' of git://git.monstr.eu/linux-2.6-microblaze: arch: change default endian for microblaze microblaze: Cocci spatch "vma_pages" microblaze: Add missing kvm_para.h to Kbuild
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Stack tracing and RCU has been having issues with each other and lockdep has been pointing out constant problems. The changes have been going into the stack tracer, but it has been discovered that the problem isn't with the stack tracer itself, but it is with calling save_stack_trace() from within the internals of RCU. The stack tracer is the one that can trigger the issue the easiest, but examining the problem further, it could also happen from a WARN() in the wrong place, or even if an NMI happened in this area and it did an rcu_read_lock(). The critical area is where RCU is not watching. Which can happen while going to and from idle, or bringing up or taking down a CPU. The final fix was to put the protection in kernel_text_address() as it is the one that requires RCU to be watching while doing the stack trace. To make this work properly, Paul had to allow rcu_irq_enter() happen after rcu_nmi_enter(). This should have been done anyway, since an NMI can page fault (reading vmalloc area), and a page fault triggers rcu_irq_enter(). One patch is just a consolidation of code so that the fix only needed to be done in one location" * tag 'trace-v4.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Remove RCU work arounds from stack tracer extable: Enable RCU if it is not watching in kernel_text_address() extable: Consolidate *kernel_text_address() functions rcu: Allow for page faults in NMI handlers
-
James Smart authored
Now that there are potentially long delays between when a remoteport or targetport delete calls is made and when the callback occurs (dev_loss_tmo timeout), no longer block in the delete routines and move the final nport puts to the callbacks. Moved the fcloop_nport_get/put/free routines to avoid forward declarations. Ensure port_info structs used in registrations are nulled in case fields are not set (ex: devloss_tmo values). Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
