- 18 Dec, 2023 11 commits
-
-
Donald Hunter authored
This is a work-in-progress spec for tc that covers: - most of the qdiscs - the flower classifier - new, del, get for qdisc, chain, class and filter Notable omissions: - most of the stats attrs are left as binary blobs - notifications are not yet implemented Signed-off-by:
Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231215093720.18774-9-donald.hunter@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Donald Hunter authored
The rt_link spec was using pad1, pad2 attributes in structs which appears in the ynl output. Replace this with the 'pad' type which doesn't pollute the output. Signed-off-by:
-
Donald Hunter authored
Start using sub-message selectors in the rt_link spec for the link-specific 'data' and 'slave-data' attributes. Signed-off-by:
-
Donald Hunter authored
The tc netlink-raw family needs binary and pad types for several qopt C structs. Add support for them to ynl. Reviewed-by:
-
Donald Hunter authored
Implement the 'sub-message' attribute type in ynl. Encode support is not yet implemented. Support for sub-message selectors at a different nest level from the key attribute is not yet supported. Reviewed-by:
-
Donald Hunter authored
Document the spec format used by netlink-raw families like rt and tc. Reviewed-by:
-
Donald Hunter authored
Add a 'sub-message' attribute type with a selector that supports polymorphic attribute formats for raw netlink families like tc. A sub-message attribute uses the value of another attribute as a selector key to choose the right sub-message format. For example if the following attribute has already been decoded: { "kind": "gre" } and we encounter the following attribute spec: - name: data type: sub-message sub-message: linkinfo-data-msg selector: kind Then we look for a sub-message definition called 'linkinfo-data-msg' and use the value of the 'kind' attribute i.e. 'gre' as the key to choose the correct format for the sub-message: sub-messages: name: linkinfo-data-msg formats: - value: bridge attribute-set: linkinfo-bridge-attrs - value: gre attribute-set: linkinfo-gre-attrs - value: geneve attribute-set: linkinfo-geneve-attrs This would decode the attribute value as a sub-message with the attribute-set called 'linkinfo-gre-attrs' as the attribute space. A sub-message can have an optional 'fixed-header' followed by zero or more attributes from an attribute-set. For example the following 'tc-options-msg' sub-message defines message formats that use a mixture of fixed-header, attribute-set or both together: sub-messages: - name: tc-options-msg formats: - value: bfifo fixed-header: tc-fifo-qopt - value: cake attribute-set: tc-cake-attrs - value: netem fixed-header: tc-netem-qopt attribute-set: tc-netem-attrs Reviewed-by: -
Donald Hunter authored
Use expression formatting that conforms to the python style guide. Reviewed-by:
-
David S. Miller authored
Pedro Tammela says: ==================== net: rtnl: introduce rcu_replace_pointer_rtnl Introduce the rcu_replace_pointer_rtnl helper to lockdep check rtnl lock rcu replacements, alongside the already existing helpers. Patch 2 uses the new helper in the rtnl_unregister_* functions. Originally this change was part of the P4TC series, as it's a recurrent pattern there, but since it has a use case in mainline we are pushing it separately. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Pedro Tammela authored
With the introduction of the rcu_replace_pointer_rtnl helper, cleanup the rtnl_unregister_* functions to use the helper instead of open coding it. Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
-
Jamal Hadi Salim authored
Introduce the rcu_replace_pointer_rtnl helper to lockdep check rtnl lock rcu replacements, alongside the already existing helpers. This is a quality of life helper so instead of using: rcu_replace_pointer(rp, p, lockdep_rtnl_is_held()) .. or the open coded.. rtnl_dereference() / rcu_assign_pointer() .. or the lazy check version .. rcu_replace_pointer(rp, p, 1) Use: rcu_replace_pointer_rtnl(rp, p) Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Victor Nogueira <victor@mojatatu.com> Signed-off-by:
-
- 17 Dec, 2023 24 commits
-
-
David S. Miller authored
Christian Marangi says: ==================== net: phy: add PHY package base addr + mmd APIs This small series is required for the upcoming qca807x PHY that will make use of PHY package mmd API and the new implementation with read/write based on base addr. The MMD PHY package patch currently has no use but it will be used in the upcoming patch and it does complete what a PHY package may require in addition to basic read/write to setup global PHY address. (Changelog for all the revision is present in the single patch) ==================== Signed-off-by: -
Christian Marangi authored
Some PHY in PHY package may require to read/write MMD regs to correctly configure the PHY package. Add support for these additional required function in both lock and no lock variant. It's assumed that the entire PHY package is either C22 or C45. We use C22 or C45 way of writing/reading to mmd regs based on the passed phydev whether it's C22 or C45. Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Signed-off-by:
-
Christian Marangi authored
Restructure phy_write_mmd and phy_read_mmd to implement generic helper for direct mdiobus access for mmd and use these helper for phydev user. This is needed in preparation of PHY package API that requires generic access to the mdiobus and are deatched from phydev struct but instead access them based on PHY package base_addr and offsets. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Christian Marangi authored
Current API for PHY package are limited to single address to configure global settings for the PHY package. It was found that some PHY package (for example the qca807x, a PHY package that is shipped with a bundle of 5 PHY) requires multiple PHY address to configure global settings. An example scenario is a PHY that have a dedicated PHY for PSGMII/serdes calibrarion and have a specific PHY in the package where the global PHY mode is set and affects every other PHY in the package. Change the API in the following way: - Change phy_package_join() to take the base addr of the PHY package instead of the global PHY addr. - Make __/phy_package_write/read() require an additional arg that select what global PHY address to use by passing the offset from the base addr passed on phy_package_join(). Each user of this API is updated to follow this new implementation following a pattern where an enum is defined to declare the offset of the addr. We also drop the check if shared is defined as any user of the phy_package_read/write is expected to use phy_package_join first. Misuse of this will correctly trigger a kernel panic for NULL pointer exception. Signed-off-by:
-
Christian Marangi authored
Switch addr type in phy_package_shared struct to u8. The value is already checked to be non negative and to be less than PHY_MAX_ADDR, hence u8 is better suited than using int. Signed-off-by:
-
Suman Ghosh authored
On some silicon variants the number of available CAM entries are less. Reserving one entry for each NIX-LF for default DMAC based pkt forwarding rules will reduce the number of available CAM entries further. Hence add configurability via devlink to set maximum number of NIX-LFs needed which inturn frees up some CAM entries. Signed-off-by:
Suman Ghosh <sumang@marvell.com> Signed-off-by:
-
David S. Miller authored
Liang Chen says: ==================== skbuff: Optimize SKB coalescing for page pool The combination of the following condition was excluded from skb coalescing: from->pp_recycle = 1 from->cloned = 1 to->pp_recycle = 1 With page pool in use, this combination can be quite common(ex. NetworkMananger may lead to the additional packet_type being registered, thus the cloning). In scenarios with a higher number of small packets, it can significantly affect the success rate of coalescing. This patchset aims to optimize this scenario and enable coalescing of this particular combination. That also involves supporting multiple users referencing the same fragment of a pp page to accomondate the need to increment the "from" SKB page's pp page reference count. Changes from v10: - re-number patches to 1/3, 2/3, 3/3 Changes from v9: - patch 1 was already applied - imporve description for patch 2 - make sure skb_pp_frag_ref only work for pp aware skbs ==================== Signed-off-by: -
Liang Chen authored
In order to address the issues encountered with commit 1effe8ca ("skbuff: fix coalescing for page_pool fragment recycling"), the combination of the following condition was excluded from skb coalescing: from->pp_recycle = 1 from->cloned = 1 to->pp_recycle = 1 However, with page pool environments, the aforementioned combination can be quite common(ex. NetworkMananger may lead to the additional packet_type being registered, thus the cloning). In scenarios with a higher number of small packets, it can significantly affect the success rate of coalescing. For example, considering packets of 256 bytes size, our comparison of coalescing success rate is as follows: Without page pool: 70% With page pool: 13% Consequently, this has an impact on performance: Without page pool: 2.57 Gbits/sec With page pool: 2.26 Gbits/sec Therefore, it seems worthwhile to optimize this scenario and enable coalescing of this particular combination. To achieve this, we need to ensure the correct increment of the "from" SKB page's page pool reference count (pp_ref_count). Following this optimization, the success rate of coalescing measured in our environment has improved as follows: With page pool: 60% This success rate is approaching the rate achieved without using page pool, and the performance has also been improved: With page pool: 2.52 Gbits/sec Below is the performance comparison for small packets before and after this optimization. We observe no impact to packets larger than 4K. packet size before after improved (bytes) (Gbits/sec) (Gbits/sec) 128 1.19 1.27 7.13% 256 2.26 2.52 11.75% 512 4.13 4.81 16.50% 1024 6.17 6.73 9.05% 2048 14.54 15.47 6.45% 4096 25.44 27.87 9.52% Signed-off-by:
Liang Chen <liangchen.linux@gmail.com> Reviewed-by:
Yunsheng Lin <linyunsheng@huawei.com> Suggested-by:
Jason Wang <jasowang@redhat.com> Reviewed-by:
Mina Almasry <almasrymina@google.com> Signed-off-by:
-
Liang Chen authored
Wrap code for checking if a page is a page_pool page into a function for better readability and ease of reuse. Signed-off-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by:
Mina Almasry <almarsymina@google.com> Signed-off-by:
-
Liang Chen authored
Up to now, we were only subtracting from the number of used page fragments to figure out when a page could be freed or recycled. A following patch introduces support for multiple users referencing the same fragment. So reduce the initial page fragments value to half to avoid overflowing. Signed-off-by:
-
David S. Miller authored
Dmitry Safonov says: ==================== selftests/net: Add TCP-AO tests An essential part of any big kernel submissions is selftests. At the beginning of TCP-AO project, I made patches to fcnal-test.sh and nettest.c to have the benefits of easy refactoring, early noticing breakages, putting a moat around the code, documenting and designing uAPI. While tests based on fcnal-test.sh/nettest.c provided initial testing* and were very easy to add, the pile of TCP-AO quickly grew out of one-binary + shell-script testing. The design of the TCP-AO testing is a bit different than one-big selftest binary as I did previously in net/ipsec.c. I found it beneficial to avoid implementing a tests runner/scheduler and delegate it to the user or Makefile. The approach is very influenced by CRIU/ZDTM testing[1]: it provides a static library with helper functions and selftest binaries that create specific scenarios. I also tried to utilize kselftest.h. test_init() function does all needed preparations. To not leave any traces after a selftest exists, it creates a network namespace and if the test wants to establish a TCP connection, a child netns. The parent and child netns have veth pair with proper ip addresses and routes set up. Both peers, the client and server are different pthreads. The treading model was chosen over forking mostly by easiness of cleanup on a failure: no need to search for children, handle SIGCHLD, make sure not to wait for a dead peer to perform anything, etc. Any thread that does exit() naturally kills the tests, sweet! The selftests are compiled currently in two variants: ipv4 and ipv6. Ipv4-mapped-ipv6 addresses might be a third variant to add, but it's not there in this version. As pretty much all tests are shared between two address families, most of the code can be shared, too. To differ in code what kind of test is running, Makefile supplies -DIPV6_TEST to compiler and ifdeffery in tests can do things that have to be different between address families. This is similar to TARGETS_C_BOTHBITS in x86 selftests and also to tests code sharing in CRIU/ZDTM. The total number of tests is 832. From them rst_ipv{4,6} has currently one flaky subtest, that may fail: > not ok 9 client connection was not reset: 0 I'll investigate what happens there. Also, unsigned-md5_ipv{4,6} are flaky because of netns counter checks: it doesn't expect that there may be retransmitted TCP segments from a previous sub-selftest. That will be fixed. Besides, key-management_ipv{4,6} has 3 sub-tests passing with XFAIL: > ok 15 # XFAIL listen() after current/rnext keys set: the socket has current/rnext keys: 100:200 > ok 16 # XFAIL listen socket, delete current key from before listen(): failed to delete the key 100:100 -16 > ok 17 # XFAIL listen socket, delete rnext key from before listen(): failed to delete the key 200:200 -16 ... > # Totals: pass:117 fail:0 xfail:3 xpass:0 skip:0 error:0 Those need some more kernel work to pass instead of xfail. The overview of selftests (see the diffstat at the bottom): ├── lib │ ├── aolib.h │ │ The header for all selftests to include. │ ├── kconfig.c │ │ Kernel kconfig detector to SKIP tests that depend on something. │ ├── netlink.c │ │ Netlink helper to add/modify/delete VETH/IPs/routes/VRFs │ │ I considered just using libmnl, but this is around 400 lines │ │ and avoids selftests dependency on out-of-tree sources/packets. │ ├── proc.c │ │ SNMP/netstat procfs parser and the counters comparator. │ ├── repair.c │ │ Heavily influenced by libsoccr and reduced to minimum TCP │ │ socket checkpoint/repair. Shouldn't be used out of selftests, │ │ though. │ ├── setup.c │ │ All the needed netns/veth/ips/etc preparations for test init. │ ├── sock.c │ │ Socket helpers: {s,g}etsockopt()s/connect()/listen()/etc. │ └── utils.c │ Random stuff (a pun intended). ├── bench-lookups.c │ The only benchmark in selftests currently: checks how well TCP-AO │ setsockopt()s perform, depending on the amount of keys on a socket. ├── connect.c │ Trivial sample, can be used as a boilerplate to write a new test. ├── connect-deny.c │ More-or-less what could be expected for TCP-AO in fcnal-test.sh ├── icmps-accept.c -> icmps-discard.c ├── icmps-discard.c │ Verifies RFC5925 (7.8) by checking that TCP-AO connection can be │ broken if ICMPs are accepted and survives when ::accept_icmps = 0 ├── key-management.c │ Key manipulations, rotations between randomized hashing algorithms │ and counter checks for those scenarios. ├── restore.c │ TCP_AO_REPAIR: verifies that a socket can be re-created without │ TCP-AO connection being interrupted. ├── rst.c │ As RST segments are signed on a separate code-path in kernel, │ verifies passive/active TCP send_reset(). ├── self-connect.c │ Verifies that TCP self-connect and also simultaneous open work. ├── seq-ext.c │ Utilizes TCP_AO_REPAIR to check that on SEQ roll-over SNE │ increment is performed and segments with different SNEs fail to │ pass verification. ├── setsockopt-closed.c │ Checks that {s,g}etsockopt()s are extendable syscalls and common │ error-paths for them. └── unsigned-md5.c Checks listen() socket for (non-)matching peers with: AO/MD5/none keys. As well as their interaction with VRFs and AO_REQUIRED flag. There are certainly more test scenarios that can be added, but even so, I'm pretty happy that this much of TCP-AO functionality and uAPIs got covered. These selftests were iteratively developed by me during TCP-AO kernel upstreaming and the resulting kernel patches would have been worse without having these tests. They provided the user-side perspective but also allowed safer refactoring with less possibility of introducing a regression. Now it's time to use them to dig a moat around the TCP-AO code! There are also people from other network companies that work on TCP-AO (+testing), so sharing these selftests will allow them to contribute and may benefit from their efforts. ==================== Signed-off-by: -
Dmitry Safonov authored
Check multiple keys on a socket: - rotation on closed socket - current/rnext operations shouldn't be possible on listen sockets - current/rnext key set should be the one, that's used on connect() - key rotations with pseudo-random generated keys - copying matching keys on connect() and on accept() At this moment there are 3 tests that are "expected" to fail: a kernel fix is needed to improve the situation, they are marked XFAIL. Sample output: > # ./key-management_ipv4 > 1..120 > # 1601[lib/setup.c:239] rand seed 1700526653 > TAP version 13 > ok 1 closed socket, delete a key: the key was deleted > ok 2 closed socket, delete all keys: the key was deleted > ok 3 closed socket, delete current key: key deletion was prevented > ok 4 closed socket, delete rnext key: key deletion was prevented > ok 5 closed socket, delete a key + set current/rnext: the key was deleted > ok 6 closed socket, force-delete current key: the key was deleted > ok 7 closed socket, force-delete rnext key: the key was deleted > ok 8 closed socket, delete current+rnext key: key deletion was prevented > ok 9 closed socket, add + change current key > ok 10 closed socket, add + change rnext key > ok 11 listen socket, delete a key: the key was deleted > ok 12 listen socket, delete all keys: the key was deleted > ok 13 listen socket, setting current key not allowed > ok 14 listen socket, setting rnext key not allowed > ok 15 # XFAIL listen() after current/rnext keys set: the socket has current/rnext keys: 100:200 > ok 16 # XFAIL listen socket, delete current key from before listen(): failed to delete the key 100:100 -16 > ok 17 # XFAIL listen socket, delete rnext key from before listen(): failed to delete the key 200:200 -16 > ok 18 listen socket, getsockopt(TCP_AO_REPAIR) is restricted > ok 19 listen socket, setsockopt(TCP_AO_REPAIR) is restricted > ok 20 listen socket, delete a key + set current/rnext: key deletion was prevented > ok 21 listen socket, force-delete current key: key deletion was prevented > ok 22 listen socket, force-delete rnext key: key deletion was prevented > ok 23 listen socket, delete a key: the key was deleted > ok 24 listen socket, add + change current key > ok 25 listen socket, add + change rnext key > ok 26 server: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations > ok 27 client: Check current/rnext keys unset before connect(): current key 19 as expected > ok 28 client: Check current/rnext keys unset before connect(): rnext key 146 as expected > ok 29 server: Check current/rnext keys unset before connect(): server alive > ok 30 server: Check current/rnext keys unset before connect(): passed counters checks > ok 31 client: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations > ok 32 server: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations > ok 33 server: Check current/rnext keys unset before connect(): passed counters checks > ok 34 client: Check current/rnext keys unset before connect(): passed counters checks > ok 35 server: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations > ok 36 server: Check current/rnext keys set before connect(): server alive > ok 37 server: Check current/rnext keys set before connect(): passed counters checks > ok 38 client: Check current/rnext keys set before connect(): current key 10 as expected > ok 39 client: Check current/rnext keys set before connect(): rnext key 137 as expected > ok 40 server: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations > ok 41 client: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations > ok 42 client: Check current/rnext keys set before connect(): passed counters checks > ok 43 server: Check current/rnext keys set before connect(): passed counters checks > ok 44 server: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations > ok 45 server: Check current != rnext keys set before connect(): server alive > ok 46 server: Check current != rnext keys set before connect(): passed counters checks > ok 47 client: Check current != rnext keys set before connect(): current key 10 as expected > ok 48 client: Check current != rnext keys set before connect(): rnext key 132 as expected > ok 49 server: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations > ok 50 client: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations > ok 51 client: Check current != rnext keys set before connect(): passed counters checks > ok 52 server: Check current != rnext keys set before connect(): passed counters checks > ok 53 server: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations > ok 54 server: Check current flapping back on peer's RnextKey request: server alive > ok 55 server: Check current flapping back on peer's RnextKey request: passed counters checks > ok 56 client: Check current flapping back on peer's RnextKey request: current key 10 as expected > ok 57 client: Check current flapping back on peer's RnextKey request: rnext key 132 as expected > ok 58 server: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations > ok 59 client: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations > ok 60 server: Check current flapping back on peer's RnextKey request: passed counters checks > ok 61 client: Check current flapping back on peer's RnextKey request: passed counters checks > ok 62 server: Rotate over all different keys: The socket keys are consistent with the expectations > ok 63 server: Rotate over all different keys: server alive > ok 64 server: Rotate over all different keys: passed counters checks > ok 65 server: Rotate over all different keys: current key 128 as expected > ok 66 client: Rotate over all different keys: rnext key 128 as expected > ok 67 server: Rotate over all different keys: current key 129 as expected > ok 68 client: Rotate over all different keys: rnext key 129 as expected > ok 69 server: Rotate over all different keys: current key 130 as expected > ok 70 client: Rotate over all different keys: rnext key 130 as expected > ok 71 server: Rotate over all different keys: current key 131 as expected > ok 72 client: Rotate over all different keys: rnext key 131 as expected > ok 73 server: Rotate over all different keys: current key 132 as expected > ok 74 client: Rotate over all different keys: rnext key 132 as expected > ok 75 server: Rotate over all different keys: current key 133 as expected > ok 76 client: Rotate over all different keys: rnext key 133 as expected > ok 77 server: Rotate over all different keys: current key 134 as expected > ok 78 client: Rotate over all different keys: rnext key 134 as expected > ok 79 server: Rotate over all different keys: current key 135 as expected > ok 80 client: Rotate over all different keys: rnext key 135 as expected > ok 81 server: Rotate over all different keys: current key 136 as expected > ok 82 client: Rotate over all different keys: rnext key 136 as expected > ok 83 server: Rotate over all different keys: current key 137 as expected > ok 84 client: Rotate over all different keys: rnext key 137 as expected > ok 85 server: Rotate over all different keys: current key 138 as expected > ok 86 client: Rotate over all different keys: rnext key 138 as expected > ok 87 server: Rotate over all different keys: current key 139 as expected > ok 88 client: Rotate over all different keys: rnext key 139 as expected > ok 89 server: Rotate over all different keys: current key 140 as expected > ok 90 client: Rotate over all different keys: rnext key 140 as expected > ok 91 server: Rotate over all different keys: current key 141 as expected > ok 92 client: Rotate over all different keys: rnext key 141 as expected > ok 93 server: Rotate over all different keys: current key 142 as expected > ok 94 client: Rotate over all different keys: rnext key 142 as expected > ok 95 server: Rotate over all different keys: current key 143 as expected > ok 96 client: Rotate over all different keys: rnext key 143 as expected > ok 97 server: Rotate over all different keys: current key 144 as expected > ok 98 client: Rotate over all different keys: rnext key 144 as expected > ok 99 server: Rotate over all different keys: current key 145 as expected > ok 100 client: Rotate over all different keys: rnext key 145 as expected > ok 101 server: Rotate over all different keys: current key 146 as expected > ok 102 client: Rotate over all different keys: rnext key 146 as expected > ok 103 server: Rotate over all different keys: current key 127 as expected > ok 104 client: Rotate over all different keys: rnext key 127 as expected > ok 105 client: Rotate over all different keys: current key 0 as expected > ok 106 client: Rotate over all different keys: rnext key 127 as expected > ok 107 server: Rotate over all different keys: The socket keys are consistent with the expectations > ok 108 client: Rotate over all different keys: The socket keys are consistent with the expectations > ok 109 client: Rotate over all different keys: passed counters checks > ok 110 server: Rotate over all different keys: passed counters checks > ok 111 server: Check accept() => established key matching: The socket keys are consistent with the expectations > ok 112 Can't add a key with non-matching ip-address for established sk > ok 113 Can't add a key with non-matching VRF for established sk > ok 114 server: Check accept() => established key matching: server alive > ok 115 server: Check accept() => established key matching: passed counters checks > ok 116 client: Check connect() => established key matching: current key 0 as expected > ok 117 client: Check connect() => established key matching: rnext key 128 as expected > ok 118 client: Check connect() => established key matching: The socket keys are consistent with the expectations > ok 119 server: Check accept() => established key matching: The socket keys are consistent with the expectations > ok 120 server: Check accept() => established key matching: passed counters checks > # Totals: pass:120 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by:
Dmitry Safonov <dima@arista.com> Signed-off-by:
-
Dmitry Safonov authored
Check that a rare functionality of TCP named self-connect works with TCP-AO. This "under the cover" also checks TCP simultaneous connect (TCP_SYN_RECV socket state), which would be harder to check other ways. In order to verify that it's indeed TCP simultaneous connect, check the counters TCPChallengeACK and TCPSYNChallenge. Sample of the output: > # ./self-connect_ipv6 > 1..4 > # 1738[lib/setup.c:254] rand seed 1696451931 > TAP version 13 > ok 1 self-connect(same keyids): connect TCPAOGood 0 => 24 > ok 2 self-connect(different keyids): connect TCPAOGood 26 => 50 > ok 3 self-connect(restore): connect TCPAOGood 52 => 97 > ok 4 self-connect(restore, different keyids): connect TCPAOGood 99 => 144 > # Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by:
-
Dmitry Safonov authored
Check that both active and passive reset works and correctly sign segments with TCP-AO or don't send RSTs if not possible to sign. A listening socket with backlog = 0 gets one connection in accept queue, another in syn queue. Once the server/listener socket is forcibly closed, client sockets aren't connected to anything. In regular situation they would receive RST on any segment, but with TCP-AO as there's no listener, no AO-key and unknown ISNs, no RST should be sent. And "passive" reset, where RST is sent on reply for some segment (tcp_v{4,6}_send_reset()) - there use TCP_REPAIR to corrupt SEQ numbers, which later results in TCP-AO signed RST, which will be verified and client socket will get EPIPE. No TCPAORequired/TCPAOBad segments are expected during these tests. Sample of the output: > # ./rst_ipv4 > 1..15 > # 1462[lib/setup.c:254] rand seed 1686611171 > TAP version 13 > ok 1 servered 1000 bytes > ok 2 Verified established tcp connection > ok 3 sk[0] = 7, connection was reset > ok 4 sk[1] = 8, connection was reset > ok 5 sk[2] = 9 > ok 6 MKT counters are good on server > ok 7 Verified established tcp connection > ok 8 client connection broken post-seq-adjust > ok 9 client connection was reset > ok 10 No segments without AO sign (server) > ok 11 Signed AO segments (server): 0 => 30 > ok 12 No segments with bad AO sign (server) > ok 13 No segments without AO sign (client) > ok 14 Signed AO segments (client): 0 => 30 > ok 15 No segments with bad AO sign (client) > # Totals: pass:15 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: -
Dmitry Safonov authored
Check that on SEQ number wraparound there is no disruption or TCPAOBad segments produced. Sample of expected output: > # ./seq-ext_ipv4 > 1..7 > # 1436[lib/setup.c:254] rand seed 1686611079 > TAP version 13 > ok 1 server alive > ok 2 post-migrate connection alive > ok 3 TCPAOGood counter increased 1002 => 3002 > ok 4 TCPAOGood counter increased 1003 => 3003 > ok 5 TCPAOBad counter didn't increase > ok 6 TCPAOBad counter didn't increase > ok 7 SEQ extension incremented: 1/1999, 1/998999 > # Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by:
-
Dmitry Safonov authored
The test plan is: 1. check that TCP-AO connection may be restored on another socket 2. check restore with wrong send/recv ISN (checking that they are part of MAC generation) 3. check restore with wrong SEQ number extension (checking that high bytes of it taken into MAC generation) Sample output expected: > # ./restore_ipv4 > 1..20 > # 1412[lib/setup.c:254] rand seed 1686610825 > TAP version 13 > ok 1 TCP-AO migrate to another socket: server alive > ok 2 TCP-AO migrate to another socket: post-migrate connection is alive > ok 3 TCP-AO migrate to another socket: counter TCPAOGood increased 23 => 44 > ok 4 TCP-AO migrate to another socket: counter TCPAOGood increased 22 => 42 > ok 5 TCP-AO with wrong send ISN: server couldn't serve > ok 6 TCP-AO with wrong send ISN: post-migrate connection is broken > ok 7 TCP-AO with wrong send ISN: counter TCPAOBad increased 0 => 4 > ok 8 TCP-AO with wrong send ISN: counter TCPAOBad increased 0 => 3 > ok 9 TCP-AO with wrong receive ISN: server couldn't serve > ok 10 TCP-AO with wrong receive ISN: post-migrate connection is broken > ok 11 TCP-AO with wrong receive ISN: counter TCPAOBad increased 4 => 8 > ok 12 TCP-AO with wrong receive ISN: counter TCPAOBad increased 5 => 10 > ok 13 TCP-AO with wrong send SEQ ext number: server couldn't serve > ok 14 TCP-AO with wrong send SEQ ext number: post-migrate connection is broken > ok 15 TCP-AO with wrong send SEQ ext number: counter TCPAOBad increased 9 => 10 > ok 16 TCP-AO with wrong send SEQ ext number: counter TCPAOBad increased 11 => 19 > ok 17 TCP-AO with wrong receive SEQ ext number: post-migrate connection is broken > ok 18 TCP-AO with wrong receive SEQ ext number: server couldn't serve > ok 19 TCP-AO with wrong receive SEQ ext number: counter TCPAOBad increased 10 => 18 > ok 20 TCP-AO with wrong receive SEQ ext number: counter TCPAOBad increased 20 => 23 > # Totals: pass:20 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by:
-
Dmitry Safonov authored
Sample output: > 1..36 > # 1106[lib/setup.c:207] rand seed 1660754406 > TAP version 13 > ok 1 Worst case connect 512 keys: min=0ms max=1ms mean=0.583329ms stddev=0.076376 > ok 2 Connect random-search 512 keys: min=0ms max=1ms mean=0.53412ms stddev=0.0516779 > ok 3 Worst case delete 512 keys: min=2ms max=11ms mean=6.04139ms stddev=0.245792 > ok 4 Add a new key 512 keys: min=0ms max=13ms mean=0.673415ms stddev=0.0820618 > ok 5 Remove random-search 512 keys: min=5ms max=9ms mean=6.65969ms stddev=0.258064 > ok 6 Remove async 512 keys: min=0ms max=0ms mean=0.041825ms stddev=0.0204512 > ok 7 Worst case connect 1024 keys: min=0ms max=2ms mean=0.520357ms stddev=0.0721358 > ok 8 Connect random-search 1024 keys: min=0ms max=2ms mean=0.535312ms stddev=0.0517355 > ok 9 Worst case delete 1024 keys: min=5ms max=9ms mean=8.27219ms stddev=0.287614 > ok 10 Add a new key 1024 keys: min=0ms max=1ms mean=0.688121ms stddev=0.0829531 > ok 11 Remove random-search 1024 keys: min=5ms max=9ms mean=8.37649ms stddev=0.289422 > ok 12 Remove async 1024 keys: min=0ms max=0ms mean=0.0457096ms stddev=0.0213798 > ok 13 Worst case connect 2048 keys: min=0ms max=2ms mean=0.748804ms stddev=0.0865335 > ok 14 Connect random-search 2048 keys: min=0ms max=2ms mean=0.782993ms stddev=0.0625697 > ok 15 Worst case delete 2048 keys: min=5ms max=10ms mean=8.23106ms stddev=0.286898 > ok 16 Add a new key 2048 keys: min=0ms max=1ms mean=0.812988ms stddev=0.0901658 > ok 17 Remove random-search 2048 keys: min=8ms max=9ms mean=8.84949ms stddev=0.297481 > ok 18 Remove async 2048 keys: min=0ms max=0ms mean=0.0297223ms stddev=0.0172402 > ok 19 Worst case connect 4096 keys: min=1ms max=5ms mean=1.53352ms stddev=0.123836 > ok 20 Connect random-search 4096 keys: min=1ms max=5ms mean=1.52226ms stddev=0.0872429 > ok 21 Worst case delete 4096 keys: min=5ms max=9ms mean=8.25874ms stddev=0.28738 > ok 22 Add a new key 4096 keys: min=0ms max=3ms mean=1.67382ms stddev=0.129376 > ok 23 Remove random-search 4096 keys: min=5ms max=10ms mean=8.26178ms stddev=0.287433 > ok 24 Remove async 4096 keys: min=0ms max=0ms mean=0.0340009ms stddev=0.0184393 > ok 25 Worst case connect 8192 keys: min=2ms max=4ms mean=2.86208ms stddev=0.169177 > ok 26 Connect random-search 8192 keys: min=2ms max=4ms mean=2.87592ms stddev=0.119915 > ok 27 Worst case delete 8192 keys: min=6ms max=11ms mean=7.55291ms stddev=0.274826 > ok 28 Add a new key 8192 keys: min=1ms max=5ms mean=2.56797ms stddev=0.160249 > ok 29 Remove random-search 8192 keys: min=5ms max=10ms mean=7.14002ms stddev=0.267208 > ok 30 Remove async 8192 keys: min=0ms max=0ms mean=0.0320066ms stddev=0.0178904 > ok 31 Worst case connect 16384 keys: min=5ms max=6ms mean=5.55334ms stddev=0.235655 > ok 32 Connect random-search 16384 keys: min=5ms max=6ms mean=5.52614ms stddev=0.166225 > ok 33 Worst case delete 16384 keys: min=5ms max=11ms mean=7.39109ms stddev=0.271866 > ok 34 Add a new key 16384 keys: min=2ms max=4ms mean=3.35799ms stddev=0.183248 > ok 35 Remove random-search 16384 keys: min=5ms max=8ms mean=6.86078ms stddev=0.261931 > ok 36 Remove async 16384 keys: min=0ms max=0ms mean=0.0302384ms stddev=0.0173892 > # Totals: pass:36 fail:0 xfail:0 xpass:0 skip:0 error:0 >From the output it's visible that the current simplified approach with linked-list of MKTs scales quite fine even for thousands of keys. And that also means that the majority of the time for delete is eaten by synchronize_rcu() [which I can confirm separately by tracing]. Signed-off-by:
-
Dmitry Safonov authored
The test plan was (most of tests have all 3 client types): 1. TCP-AO listen (INADDR_ANY) 2. TCP-MD5 listen (INADDR_ANY) 3. non-signed listen (INADDR_ANY) 4. TCP-AO + TCP-MD5 listen (prefix) 5. TCP-AO subprefix add failure [checked in setsockopt-closed.c] 6. TCP-AO out of prefix connect [checked in connect-deny.c] 7. TCP-AO + TCP-MD5 on connect() 8. TCP-AO intersect with TCP-MD5 failure 9. Established TCP-AO: add TCP-MD5 key 10. Established TCP-MD5: add TCP-AO key 11. Established non-signed: add TCP-AO key Output produced: > # ./unsigned-md5_ipv6 > 1..72 > # 1592[lib/setup.c:239] rand seed 1697567046 > TAP version 13 > ok 1 AO server (INADDR_ANY): AO client: counter TCPAOGood increased 0 => 2 > ok 2 AO server (INADDR_ANY): AO client: connected > ok 3 AO server (INADDR_ANY): MD5 client > ok 4 AO server (INADDR_ANY): MD5 client: counter TCPMD5Unexpected increased 0 => 1 > ok 5 AO server (INADDR_ANY): no sign client: counter TCPAORequired increased 0 => 1 > ok 6 AO server (INADDR_ANY): unsigned client > ok 7 AO server (AO_REQUIRED): AO client: connected > ok 8 AO server (AO_REQUIRED): AO client: counter TCPAOGood increased 4 => 6 > ok 9 AO server (AO_REQUIRED): unsigned client > ok 10 AO server (AO_REQUIRED): unsigned client: counter TCPAORequired increased 1 => 2 > ok 11 MD5 server (INADDR_ANY): AO client: counter TCPAOKeyNotFound increased 0 => 1 > ok 12 MD5 server (INADDR_ANY): AO client > ok 13 MD5 server (INADDR_ANY): MD5 client: connected > ok 14 MD5 server (INADDR_ANY): MD5 client: no counter checks > ok 15 MD5 server (INADDR_ANY): no sign client > ok 16 MD5 server (INADDR_ANY): no sign client: counter TCPMD5NotFound increased 0 => 1 > ok 17 no sign server: AO client > ok 18 no sign server: AO client: counter TCPAOKeyNotFound increased 1 => 2 > ok 19 no sign server: MD5 client > ok 20 no sign server: MD5 client: counter TCPMD5Unexpected increased 1 => 2 > ok 21 no sign server: no sign client: connected > ok 22 no sign server: no sign client: counter CurrEstab increased 0 => 1 > ok 23 AO+MD5 server: AO client (matching): connected > ok 24 AO+MD5 server: AO client (matching): counter TCPAOGood increased 8 => 10 > ok 25 AO+MD5 server: AO client (misconfig, matching MD5) > ok 26 AO+MD5 server: AO client (misconfig, matching MD5): counter TCPAOKeyNotFound increased 2 => 3 > ok 27 AO+MD5 server: AO client (misconfig, non-matching): counter TCPAOKeyNotFound increased 3 => 4 > ok 28 AO+MD5 server: AO client (misconfig, non-matching) > ok 29 AO+MD5 server: MD5 client (matching): connected > ok 30 AO+MD5 server: MD5 client (matching): no counter checks > ok 31 AO+MD5 server: MD5 client (misconfig, matching AO) > ok 32 AO+MD5 server: MD5 client (misconfig, matching AO): counter TCPMD5Unexpected increased 2 => 3 > ok 33 AO+MD5 server: MD5 client (misconfig, non-matching) > ok 34 AO+MD5 server: MD5 client (misconfig, non-matching): counter TCPMD5Unexpected increased 3 => 4 > ok 35 AO+MD5 server: no sign client (unmatched): connected > ok 36 AO+MD5 server: no sign client (unmatched): counter CurrEstab increased 0 => 1 > ok 37 AO+MD5 server: no sign client (misconfig, matching AO) > ok 38 AO+MD5 server: no sign client (misconfig, matching AO): counter TCPAORequired increased 2 => 3 > ok 39 AO+MD5 server: no sign client (misconfig, matching MD5) > ok 40 AO+MD5 server: no sign client (misconfig, matching MD5): counter TCPMD5NotFound increased 1 => 2 > ok 41 AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys: connect() was prevented > ok 42 AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys: no counter checks > ok 43 AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys: connect() was prevented > ok 44 AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys: no counter checks > ok 45 TCP-AO established: add TCP-MD5 key: postfailed as expected > ok 46 TCP-AO established: add TCP-MD5 key: counter TCPAOGood increased 12 => 14 > ok 47 TCP-MD5 established: add TCP-AO key: postfailed as expected > ok 48 TCP-MD5 established: add TCP-AO key: no counter checks > ok 49 non-signed established: add TCP-AO key: postfailed as expected > ok 50 non-signed established: add TCP-AO key: counter CurrEstab increased 0 => 1 > ok 51 TCP-AO key intersects with existing TCP-MD5 key: prefailed as expected: Key was rejected by service > ok 52 TCP-MD5 key intersects with existing TCP-AO key: prefailed as expected: Key was rejected by service > ok 53 TCP-MD5 key + TCP-AO required: prefailed as expected: Key was rejected by service > ok 54 TCP-AO required on socket + TCP-MD5 key: prefailed as expected: Key was rejected by service > ok 55 VRF: TCP-AO key (no l3index) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service > ok 56 VRF: TCP-MD5 key (no l3index) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service > ok 57 VRF: TCP-AO key (no l3index) + TCP-MD5 key (l3index=0): prefailed as expected: Key was rejected by service > ok 58 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service > ok 59 VRF: TCP-AO key (no l3index) + TCP-MD5 key (l3index=N): prefailed as expected: Key was rejected by service > ok 60 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service > ok 61 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service > ok 62 VRF: TCP-MD5 key (no l3index) + TCP-AO key (l3index=0): prefailed as expected: Key was rejected by service > ok 63 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (l3index=0): prefailed as expected: Key was rejected by service > ok 64 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (l3index=0): prefailed as expected: Key was rejected by service > ok 65 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (l3index=N) > ok 66 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (l3index=0) > ok 67 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service > ok 68 VRF: TCP-MD5 key (no l3index) + TCP-AO key (l3index=N): prefailed as expected: Key was rejected by service > ok 69 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (l3index=0) > ok 70 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (l3index=N) > ok 71 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (l3index=N): prefailed as expected: Key was rejected by service > ok 72 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (l3index=N): prefailed as expected: Key was rejected by service > # Totals: pass:72 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by:
-
Dmitry Safonov authored
Verify corner-cases for UAPI. Sample output: > # ./setsockopt-closed_ipv4 > 1..120 > # 1657[lib/setup.c:254] rand seed 1681938184 > TAP version 13 > ok 1 AO add: minimum size > ok 2 AO add: extended size > ok 3 AO add: null optval > ok 4 AO del: minimum size > ok 5 AO del: extended size > ok 6 AO del: null optval > ok 7 AO set info: minimum size > ok 8 AO set info: extended size > ok 9 AO info get: : extended size > ok 10 AO set info: null optval > ok 11 AO get info: minimum size > ok 12 AO get info: extended size > ok 13 AO get info: null optval > ok 14 AO get info: null optlen > ok 15 AO get keys: minimum size > ok 16 AO get keys: extended size > ok 17 AO get keys: null optval > ok 18 AO get keys: null optlen > ok 19 key add: too big keylen > ok 20 key add: using reserved padding > ok 21 key add: using reserved2 padding > ok 22 key add: wrong address family > ok 23 key add: port (unsupported) > ok 24 key add: no prefix, addr > ok 25 key add: no prefix, any addr > ok 26 key add: prefix, any addr > ok 27 key add: too big prefix > ok 28 key add: too short prefix > ok 29 key add: bad key flags > ok 30 key add: add current key on a listen socket > ok 31 key add: add rnext key on a listen socket > ok 32 key add: add current+rnext key on a listen socket > ok 33 key add: add key and set as current > ok 34 key add: add key and set as rnext > ok 35 key add: add key and set as current+rnext > ok 36 key add: ifindex without TCP_AO_KEYF_IFNINDEX > ok 37 key add: non-existent VRF > ok 38 optmem limit was hit on adding 69 key > ok 39 key add: maclen bigger than TCP hdr > ok 40 key add: bad algo > ok 41 key del: using reserved padding > ok 42 key del: using reserved2 padding > ok 43 key del: del and set current key on a listen socket > ok 44 key del: del and set rnext key on a listen socket > ok 45 key del: del and set current+rnext key on a listen socket > ok 46 key del: bad key flags > ok 47 key del: ifindex without TCP_AO_KEYF_IFNINDEX > ok 48 key del: non-existent VRF > ok 49 key del: set non-exising current key > ok 50 key del: set non-existing rnext key > ok 51 key del: set non-existing current+rnext key > ok 52 key del: set current key > ok 53 key del: set rnext key > ok 54 key del: set current+rnext key > ok 55 key del: set as current key to be removed > ok 56 key del: set as rnext key to be removed > ok 57 key del: set as current+rnext key to be removed > ok 58 key del: async on non-listen > ok 59 key del: non-existing sndid > ok 60 key del: non-existing rcvid > ok 61 key del: incorrect addr > ok 62 key del: correct key delete > ok 63 AO info set: set current key on a listen socket > ok 64 AO info set: set rnext key on a listen socket > ok 65 AO info set: set current+rnext key on a listen socket > ok 66 AO info set: using reserved padding > ok 67 AO info set: using reserved2 padding > ok 68 AO info set: accept_icmps > ok 69 AO info get: accept_icmps > ok 70 AO info set: ao required > ok 71 AO info get: ao required > ok 72 AO info set: ao required with MD5 key > ok 73 AO info set: set non-existing current key > ok 74 AO info set: set non-existing rnext key > ok 75 AO info set: set non-existing current+rnext key > ok 76 AO info set: set current key > ok 77 AO info get: set current key > ok 78 AO info set: set rnext key > ok 79 AO info get: set rnext key > ok 80 AO info set: set current+rnext key > ok 81 AO info get: set current+rnext key > ok 82 AO info set: set counters > ok 83 AO info get: set counters > ok 84 AO info set: no-op > ok 85 AO info get: no-op > ok 86 get keys: no ao_info > ok 87 get keys: proper tcp_ao_get_mkts() > ok 88 get keys: set out-only pkt_good counter > ok 89 get keys: set out-only pkt_bad counter > ok 90 get keys: bad keyflags > ok 91 get keys: ifindex without TCP_AO_KEYF_IFNINDEX > ok 92 get keys: using reserved field > ok 93 get keys: no prefix, addr > ok 94 get keys: no prefix, any addr > ok 95 get keys: prefix, any addr > ok 96 get keys: too big prefix > ok 97 get keys: too short prefix > ok 98 get keys: prefix + addr > ok 99 get keys: get_all + prefix > ok 100 get keys: get_all + addr > ok 101 get keys: get_all + sndid > ok 102 get keys: get_all + rcvid > ok 103 get keys: current + prefix > ok 104 get keys: current + addr > ok 105 get keys: current + sndid > ok 106 get keys: current + rcvid > ok 107 get keys: rnext + prefix > ok 108 get keys: rnext + addr > ok 109 get keys: rnext + sndid > ok 110 get keys: rnext + rcvid > ok 111 get keys: get_all + current > ok 112 get keys: get_all + rnext > ok 113 get keys: current + rnext > ok 114 key add: duplicate: full copy > ok 115 key add: duplicate: any addr key on the socket > ok 116 key add: duplicate: add any addr key > ok 117 key add: duplicate: add any addr for the same subnet > ok 118 key add: duplicate: full copy of a key > ok 119 key add: duplicate: RecvID differs > ok 120 key add: duplicate: SendID differs > # Totals: pass:120 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by:
-
Dmitry Safonov authored
Add TCP-AO tests on connect()/accept() pair. SNMP counters exposed by kernel are very useful here to verify the expected behavior of TCP-AO. Expected output for ipv4 version: > # ./connect-deny_ipv4 > 1..19 > # 1702[lib/setup.c:254] rand seed 1680553689 > TAP version 13 > ok 1 Non-AO server + AO client > ok 2 Non-AO server + AO client: counter TCPAOKeyNotFound increased 0 => 1 > ok 3 AO server + Non-AO client > ok 4 AO server + Non-AO client: counter TCPAORequired increased 0 => 1 > ok 5 Wrong password > ok 6 Wrong password: counter TCPAOBad increased 0 => 1 > ok 7 Wrong rcv id > ok 8 Wrong rcv id: counter TCPAOKeyNotFound increased 1 => 2 > ok 9 Wrong snd id > ok 10 Wrong snd id: counter TCPAOGood increased 0 => 1 > ok 11 Server: Wrong addr: counter TCPAOKeyNotFound increased 2 => 3 > ok 12 Server: Wrong addr > ok 13 Client: Wrong addr: connect() was prevented > ok 14 rcv id != snd id: connected > ok 15 rcv id != snd id: counter TCPAOGood increased 1 => 3 > ok 16 Server: prefix match: connected > ok 17 Server: prefix match: counter TCPAOGood increased 4 => 6 > ok 18 Client: prefix match: connected > ok 19 Client: prefix match: counter TCPAOGood increased 7 => 9 > # Totals: pass:19 fail:0 xfail:0 xpass:0 skip:0 error:0 Expected output for ipv6 version: > # ./connect-deny_ipv6 > 1..19 > # 1725[lib/setup.c:254] rand seed 1680553711 > TAP version 13 > ok 1 Non-AO server + AO client > ok 2 Non-AO server + AO client: counter TCPAOKeyNotFound increased 0 => 1 > ok 3 AO server + Non-AO client: counter TCPAORequired increased 0 => 1 > ok 4 AO server + Non-AO client > ok 5 Wrong password: counter TCPAOBad increased 0 => 1 > ok 6 Wrong password > ok 7 Wrong rcv id: counter TCPAOKeyNotFound increased 1 => 2 > ok 8 Wrong rcv id > ok 9 Wrong snd id: counter TCPAOGood increased 0 => 1 > ok 10 Wrong snd id > ok 11 Server: Wrong addr > ok 12 Server: Wrong addr: counter TCPAOKeyNotFound increased 2 => 3 > ok 13 Client: Wrong addr: connect() was prevented > ok 14 rcv id != snd id: connected > ok 15 rcv id != snd id: counter TCPAOGood increased 1 => 3 > ok 16 Server: prefix match: connected > ok 17 Server: prefix match: counter TCPAOGood increased 5 => 7 > ok 18 Client: prefix match: connected > ok 19 Client: prefix match: counter TCPAOGood increased 8 => 10 > # Totals: pass:19 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by:
-
Dmitry Safonov authored
Reverse to icmps-discard test: the server accepts ICMPs, using TCP_AO_CMDF_ACCEPT_ICMP and it is expected to fail under ICMP flood from client. Test that the default pre-TCP-AO behaviour functions when TCP_AO_CMDF_ACCEPT_ICMP is set. Expected output for ipv4 version (in case it receives ICMP_PROT_UNREACH): > # ./icmps-accept_ipv4 > 1..3 > # 3209[lib/setup.c:166] rand seed 1642623870 > TAP version 13 > # 3209[lib/proc.c:207] Snmp6 Ip6InReceives: 0 => 1 > # 3209[lib/proc.c:207] Snmp6 Ip6InNoRoutes: 0 => 1 > # 3209[lib/proc.c:207] Snmp6 Ip6InOctets: 0 => 76 > # 3209[lib/proc.c:207] Snmp6 Ip6InNoECTPkts: 0 => 1 > # 3209[lib/proc.c:207] Tcp InSegs: 3 => 23 > # 3209[lib/proc.c:207] Tcp OutSegs: 2 => 22 > # 3209[lib/proc.c:207] IcmpMsg InType3: 0 => 4 > # 3209[lib/proc.c:207] Icmp InMsgs: 0 => 4 > # 3209[lib/proc.c:207] Icmp InDestUnreachs: 0 => 4 > # 3209[lib/proc.c:207] Ip InReceives: 3 => 27 > # 3209[lib/proc.c:207] Ip InDelivers: 3 => 27 > # 3209[lib/proc.c:207] Ip OutRequests: 2 => 22 > # 3209[lib/proc.c:207] IpExt InOctets: 288 => 3420 > # 3209[lib/proc.c:207] IpExt OutOctets: 124 => 3244 > # 3209[lib/proc.c:207] IpExt InNoECTPkts: 3 => 25 > # 3209[lib/proc.c:207] TcpExt TCPPureAcks: 1 => 2 > # 3209[lib/proc.c:207] TcpExt TCPOrigDataSent: 0 => 20 > # 3209[lib/proc.c:207] TcpExt TCPDelivered: 0 => 19 > # 3209[lib/proc.c:207] TcpExt TCPAOGood: 3 => 23 > ok 1 InDestUnreachs delivered 4 > ok 2 server failed with -92: Protocol not available > ok 3 TCPAODroppedIcmps counter didn't change: 0 >= 0 > # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 Expected output for ipv6 version (in case it receives ADM_PROHIBITED): > # ./icmps-accept_ipv6 > 1..3 > # 3277[lib/setup.c:166] rand seed 1642624035 > TAP version 13 > # 3277[lib/proc.c:207] Snmp6 Ip6InReceives: 6 => 31 > # 3277[lib/proc.c:207] Snmp6 Ip6InDelivers: 4 => 29 > # 3277[lib/proc.c:207] Snmp6 Ip6OutRequests: 4 => 24 > # 3277[lib/proc.c:207] Snmp6 Ip6InOctets: 592 => 4492 > # 3277[lib/proc.c:207] Snmp6 Ip6OutOctets: 332 => 3852 > # 3277[lib/proc.c:207] Snmp6 Ip6InNoECTPkts: 6 => 31 > # 3277[lib/proc.c:207] Snmp6 Icmp6InMsgs: 1 => 6 > # 3277[lib/proc.c:207] Snmp6 Icmp6InDestUnreachs: 0 => 5 > # 3277[lib/proc.c:207] Snmp6 Icmp6InType1: 0 => 5 > # 3277[lib/proc.c:207] Tcp InSegs: 3 => 23 > # 3277[lib/proc.c:207] Tcp OutSegs: 2 => 22 > # 3277[lib/proc.c:207] TcpExt TCPPureAcks: 1 => 2 > # 3277[lib/proc.c:207] TcpExt TCPOrigDataSent: 0 => 20 > # 3277[lib/proc.c:207] TcpExt TCPDelivered: 0 => 19 > # 3277[lib/proc.c:207] TcpExt TCPAOGood: 3 => 23 > ok 1 Icmp6InDestUnreachs delivered 5 > ok 2 server failed with -13: Permission denied > ok 3 TCPAODroppedIcmps counter didn't change: 0 >= 0 > # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 With some luck the server may fail with ECONNREFUSED (depending on what icmp packet was delivered firstly). For the kernel error handlers see: tab_unreach[] and icmp_err_convert[]. Signed-off-by:
-
Dmitry Safonov authored
Hand-crafted ICMP packets are sent to the server, the server checks for hard/soft errors and fails if any. Expected output for ipv4 version: > # ./icmps-discard_ipv4 > 1..3 > # 3164[lib/setup.c:166] rand seed 1642623745 > TAP version 13 > # 3164[lib/proc.c:207] Snmp6 Ip6InReceives: 0 => 1 > # 3164[lib/proc.c:207] Snmp6 Ip6InNoRoutes: 0 => 1 > # 3164[lib/proc.c:207] Snmp6 Ip6InOctets: 0 => 76 > # 3164[lib/proc.c:207] Snmp6 Ip6InNoECTPkts: 0 => 1 > # 3164[lib/proc.c:207] Tcp InSegs: 2 => 203 > # 3164[lib/proc.c:207] Tcp OutSegs: 1 => 202 > # 3164[lib/proc.c:207] IcmpMsg InType3: 0 => 543 > # 3164[lib/proc.c:207] Icmp InMsgs: 0 => 543 > # 3164[lib/proc.c:207] Icmp InDestUnreachs: 0 => 543 > # 3164[lib/proc.c:207] Ip InReceives: 2 => 746 > # 3164[lib/proc.c:207] Ip InDelivers: 2 => 746 > # 3164[lib/proc.c:207] Ip OutRequests: 1 => 202 > # 3164[lib/proc.c:207] IpExt InOctets: 132 => 61684 > # 3164[lib/proc.c:207] IpExt OutOctets: 68 => 31324 > # 3164[lib/proc.c:207] IpExt InNoECTPkts: 2 => 744 > # 3164[lib/proc.c:207] TcpExt TCPPureAcks: 1 => 2 > # 3164[lib/proc.c:207] TcpExt TCPOrigDataSent: 0 => 200 > # 3164[lib/proc.c:207] TcpExt TCPDelivered: 0 => 199 > # 3164[lib/proc.c:207] TcpExt TCPAOGood: 2 => 203 > # 3164[lib/proc.c:207] TcpExt TCPAODroppedIcmps: 0 => 541 > ok 1 InDestUnreachs delivered 543 > ok 2 Server survived 20000 bytes of traffic > ok 3 ICMPs ignored 541 > # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 Expected output for ipv6 version: > # ./icmps-discard_ipv6 > 1..3 > # 3186[lib/setup.c:166] rand seed 1642623803 > TAP version 13 > # 3186[lib/proc.c:207] Snmp6 Ip6InReceives: 4 => 568 > # 3186[lib/proc.c:207] Snmp6 Ip6InDelivers: 3 => 564 > # 3186[lib/proc.c:207] Snmp6 Ip6OutRequests: 2 => 204 > # 3186[lib/proc.c:207] Snmp6 Ip6InMcastPkts: 1 => 4 > # 3186[lib/proc.c:207] Snmp6 Ip6OutMcastPkts: 0 => 1 > # 3186[lib/proc.c:207] Snmp6 Ip6InOctets: 320 => 70420 > # 3186[lib/proc.c:207] Snmp6 Ip6OutOctets: 160 => 35512 > # 3186[lib/proc.c:207] Snmp6 Ip6InMcastOctets: 72 => 336 > # 3186[lib/proc.c:207] Snmp6 Ip6OutMcastOctets: 0 => 76 > # 3186[lib/proc.c:207] Snmp6 Ip6InNoECTPkts: 4 => 568 > # 3186[lib/proc.c:207] Snmp6 Icmp6InMsgs: 1 => 361 > # 3186[lib/proc.c:207] Snmp6 Icmp6OutMsgs: 1 => 2 > # 3186[lib/proc.c:207] Snmp6 Icmp6InDestUnreachs: 0 => 360 > # 3186[lib/proc.c:207] Snmp6 Icmp6OutMLDv2Reports: 0 => 1 > # 3186[lib/proc.c:207] Snmp6 Icmp6InType1: 0 => 360 > # 3186[lib/proc.c:207] Snmp6 Icmp6OutType143: 0 => 1 > # 3186[lib/proc.c:207] Tcp InSegs: 2 => 203 > # 3186[lib/proc.c:207] Tcp OutSegs: 1 => 202 > # 3186[lib/proc.c:207] TcpExt TCPPureAcks: 1 => 2 > # 3186[lib/proc.c:207] TcpExt TCPOrigDataSent: 0 => 200 > # 3186[lib/proc.c:207] TcpExt TCPDelivered: 0 => 199 > # 3186[lib/proc.c:207] TcpExt TCPAOGood: 2 => 203 > # 3186[lib/proc.c:207] TcpExt TCPAODroppedIcmps: 0 => 360 > ok 1 Icmp6InDestUnreachs delivered 360 > ok 2 Server survived 20000 bytes of traffic > ok 3 ICMPs ignored 360 > # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by:
-
Dmitry Safonov authored
Provide functions to create selftests dedicated to TCP-AO. They can run in parallel, as they use temporary net namespaces. They can be very specific to the feature being tested. This will allow to create a lot of TCP-AO tests, without complicating one binary with many --options and to create scenarios, that are hard to put in bash script that uses one binary. Signed-off-by:
-
Vladimir Oltean authored
phylink_parse_mode() populates all possible supported link modes for a given phy_interface_t, for the case where a phylib phy may be absent and we can't retrieve the supported link modes from that. Russell points out that since the introduction of the generic validation helpers phylink_get_capabilities() and phylink_caps_to_linkmodes(), we can rewrite this procedure to populate the pl->supported mask, so that instead of spelling out the link modes, we derive an intermediary mac_capabilities bit field, and we convert that to the equivalent link modes. Suggested-by:
Russell King (Oracle) <linux@armlinux.org.uk> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
- 16 Dec, 2023 4 commits
-
-
Jakub Kicinski authored
Eric Dumazet says: ==================== tcp/dccp: refine source port selection This patch series leverages IP_LOCAL_PORT_RANGE option to no longer favor even source port selection at connect() time. This should lower time taken by connect() for hosts having many active connections to the same destination. ==================== Link: https://lore.kernel.org/r/20231214192939.1962891-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
In commit 1580ab63 ("tcp/dccp: better use of ephemeral ports in connect()") we added an heuristic to select even ports for connect() and odd ports for bind(). This was nice because no applications changes were needed. But it added more costs when all even ports are in use, when there are few listeners and many active connections. Since then, IP_LOCAL_PORT_RANGE has been added to permit an application to partition ephemeral port range at will. This patch extends the idea so that if IP_LOCAL_PORT_RANGE is set on a socket before accept(), port selection no longer favors even ports. This means that connect() can find a suitable source port faster, and applications can use a different split between connect() and bind() users. This should give more entropy to Toeplitz hash used in RSS: Using even ports was wasting one bit from the 16bit sport. A similar change can be done in inet_csk_find_open_port() if needed. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
Jason Xing <kerneljasonxing@gmail.com> Link: https://lore.kernel.org/r/20231214192939.1962891-3-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
Change inet_sk_get_local_port_range() to return a boolean, telling the callers if the port range was provided by IP_LOCAL_PORT_RANGE socket option. Adds documentation while we are at it. Signed-off-by:
-
Rob Herring authored
Defining the size of register regions is not really in scope of what bindings need to cover. The schema for this is also not completely correct as a reg entry can be variable number of cells for the address and size, but the schema assumes 1 cell. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231213232455.2248056-1-robh@kernel.orgSigned-off-by:
-
- 15 Dec, 2023 1 commit
-
-
Wang Jinchao authored
rm the second include <linux/slab.h> Signed-off-by:
Wang Jinchao <wangjinchao@xfusion.com> Signed-off-by:
-
