- 11 Sep, 2023 4 commits
-
-
Ma Jun authored
[1] Remove the irq flags setting code since pci_alloc_irq_vectors() handles these flags. [2] Free the msi vectors in case of error. Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Lang Yu authored
Fixes: 5d5eac7e ("drm/amdgpu: add selftest framework for UMSCH") Signed-off-by:
Lang Yu <Lang.Yu@amd.com> Reviewed-by:
Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/all/ZPhddADtKmOuVyDq@lang-desktopSigned-off-by:
-
Mukul Joshi authored
This patch fixes the following unaligned 64-bit doorbell warning seen when submitting packets on HIQ on GFX v9.4.3 by making the HIQ doorbell 64-bit aligned. The warning is seen when GPU is loaded in any mode other than SPX mode. [ +0.000301] ------------[ cut here ]------------ [ +0.000003] Unaligned 64-bit doorbell [ +0.000030] WARNING: /amdkfd/kfd_doorbell.c:339 write_kernel_doorbell64+0x72/0x80 [ +0.000003] RIP: 0010:write_kernel_doorbell64+0x72/0x80 [ +0.000004] RSP: 0018:ffffc90004287730 EFLAGS: 00010246 [ +0.000005] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ +0.000003] RDX: 0000000000000001 RSI: ffffffff82837c71 RDI: 00000000ffffffff [ +0.000003] RBP: ffffc90004287748 R08: 0000000000000003 R09: 0000000000000001 [ +0.000002] R10: 000000000000001a R11: ffff88a034008198 R12: ffffc900013bd004 [ +0.000003] R13: 0000000000000008 R14: ffffc900042877b0 R15: 000000000000007f [ +0.000003] FS: 00007fa8c7b62000(0000) GS:ffff889f88400000(0000) knlGS:0000000000000000 [ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000056111c45aaf0 CR3: 00000001414f2002 CR4: 0000000000770ee0 [ +0.000003] PKRU: 55555554 [ +0.000002] Call Trace: [ +0.000004] <TASK> [ +0.000006] kq_submit_packet+0x45/0x50 [amdgpu] [ +0.000524] pm_send_set_resources+0x7f/0xc0 [amdgpu] [ +0.000500] set_sched_resources+0xe4/0x160 [amdgpu] [ +0.000503] start_cpsch+0x1c5/0x2a0 [amdgpu] [ +0.000497] kgd2kfd_device_init.cold+0x816/0xb42 [amdgpu] [ +0.000743] amdgpu_amdkfd_device_init+0x15f/0x1f0 [amdgpu] [ +0.000602] amdgpu_device_init.cold+0x1813/0x2176 [amdgpu] [ +0.000684] ? pci_bus_read_config_word+0x4a/0x80 [ +0.000012] ? do_pci_enable_device+0xdc/0x110 [ +0.000008] amdgpu_driver_load_kms+0x1a/0x110 [amdgpu] [ +0.000545] amdgpu_pci_probe+0x197/0x400 [amdgpu] Fixes: c3186665 ("drm/amdgpu: use doorbell mgr for kfd kernel doorbells") Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Mukul Joshi authored
This patch fixes the case where the code currently passes absolute register address and not the reg offset, which HWS expects, when sending the PM4 packet to set/update CWSR grace period. Additionally, cleanup the signature of build_grace_period_packet_info function as it no longer needs the inst parameter. Signed-off-by:
Jonathan Kim <jonathan.kim@amd.com> Signed-off-by:
-
- 06 Sep, 2023 32 commits
-
-
Yang Li authored
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn35/dcn35_fpu.c:260 dcn35_update_bw_bounding_box_fpu() warn: inconsistent indenting Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Candice Li authored
Add umc v12_0 ras error querying. Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Lijo Lazar authored
SMU v13.0.6 SOCs have 100MHz reference clock. Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
-
Hawking Zhang authored
gfx_v9_4_3_ue|ce_reg_list is an array per gfx core instance correct the settings of se_num and reg_inst for some of gfx ras counters so all the available register instances can be polled for ras status. Signed-off-by:
-
Lijo Lazar authored
Restrict the wait for boot loader steady state only to SMUv13.0.6. For older SOCs, ASIC init has a longer wait period and that takes care. Signed-off-by:
Asad Kamal <asad.kamal@amd.com> Signed-off-by:
-
Lijo Lazar authored
Show only firmware version attributes that have valid version. Hide others. Signed-off-by:
Yang Wang <kevinyang.wang@amd.com> Signed-off-by:
-
Lang Yu authored
Use proper type. Fixes: 9d4346bd ("drm/amdgpu: add VPE 6.1.0 support") Signed-off-by:
Solomon Chiu <solomon.chiu@amd.com> Reviewed-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202309020608.FwP8QMht-lkp@intel.comSigned-off-by:
-
Srinivasan Shanmugam authored
Use min_t to replace min, min_t is a bit fast because min use twice typeof. And using min_t is cleaner here since the min/max macros do a typecheck while min_t()/max_t() to an explicit type cast. Fixes the below checkpatch warning: WARNING: min() should probably be min_t() Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by:
-
Candice Li authored
Add umc v12_0_0 ip headers. Signed-off-by:
-
Candice Li authored
Only calculate pcie_index_hi for register address greater than 32bits. Signed-off-by:
-
Candice Li authored
Add 64bits register access support on register whose address is greater than 32bits. Signed-off-by:
-
Srinivasan Shanmugam authored
This warning is for the declaration of a static array, and it is recommended to declare it as type "static const char * const" instead of "static const char *". an array pointer declared as type "static const char *" can point to a different character constant because the pointer is mutable. However, if it is declared as type "static const char * const", the pointer will point to an immutable character constant, preventing it from being modified which can better ensure the safety and stability of the program. Fixes the below: WARNING: static const char * array should probably be static const char * const Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by:
-
Darren Powell authored
split switch statement into two and consolidate the common code for printing most of the types of clock speeds Signed-off-by:
Darren Powell <darren.powell@amd.com> Reviewed-by:
-
Darren Powell authored
Use variables to remove ternary expression in print statement and improve readability. This will help to optimize the code duplication in the switch statement Also Changed: replaced single_dpm_table->count as iterator in for loops with safer clocks_num_levels value replaced dpm_table.value usage with local var clocks_mhz Signed-off-by: -
Darren Powell authored
Use variables to remove the multiple nested ternary expressions and improve readability. This will help to optimize the code duplication in the switch statement Also Changed: Modify function aldebaran_get_clk_table to void function as it always returns 0 Use const string "attempt_string" to cut down on repetition Signed-off-by: -
Darren Powell authored
Replace print_clock_levels with emit_clock_levels for aldebaran * replace .print_clk_levels with .emit_clk_levels in aldebaran_ppt_funcs * added extra parameter int *offset * removed var size, uses arg *offset instead * removed call to smu_cmn_get_sysfs_buf * errors are returned to caller * returns 0 on success additional incidental changes * changed type of vars i, now to remove comparing mismatch types * renamed var s/now/cur_value/ * switch statement default now returns -EINVAL * RAS Recovery returns -EBUSY Based on commit b06b48d7 ("amdgpu/pm: Implement emit_clk_levels for navi10") Signed-off-by:
-
Yang Li authored
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c:288 dcn35_update_clocks() warn: inconsistent indenting Signed-off-by:
-
Yang Li authored
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn35/dcn35_hwseq.c:159 dcn35_init_hw() warn: inconsistent indentig Signed-off-by:
-
Yang Li authored
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn35/dcn35_resource.c:1877 dcn35_resource_construct() warn: inconsistent indenting Signed-off-by:
-
Yang Li authored
drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_srv.c:355 dmub_srv_hw_setup() warn: inconsistent indenting Signed-off-by:
-
Yang Li authored
./drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c: dcn35_clk_mgr.h is included more than once. Signed-off-by:
-
Hamza Mahfooz authored
There are two places in apply_below_the_range() where it's possible for a divide by zero error to occur. So, to fix this make sure the divisor is non-zero before attempting the computation in both cases. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2637 Fixes: a463b263 ("drm/amd/display: Fix frames_to_insert math") Fixes: ded6119e ("drm/amd/display: Reinstate LFC optimization") Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Yang Li authored
./drivers/gpu/drm/amd/display/dc/dcn35/dcn35_hwseq.c: clk_mgr.h is included more than once. Signed-off-by:
-
Yang Li authored
./drivers/gpu/drm/amd/display/dc/dcn35/dcn35_optc.c: dcn35_optc.h is included more than once. Signed-off-by:
-
Yang Li authored
./drivers/gpu/drm/amd/display/dc/dcn35/dcn35_resource.c: dcn31/dcn31_dio_link_encoder.h is included more than once. Signed-off-by:
-
Jiapeng Chong authored
No functional modification involved. drivers/gpu/drm/amd/amdgpu/nbio_v7_11.c:34 nbio_v7_11_get_rev_id() warn: inconsistent indenting. v2: drop leftover printk (Alex) Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6316Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Melissa Wen authored
For DRM legacy gamma, AMD display manager applies implicit sRGB degamma using a pre-defined sRGB transfer function. It works fine for DCN2 family where degamma ROM and custom curves go to the same color block. But, on DCN3+, degamma is split into two blocks: degamma ROM for pre-defined TFs and `gamma correction` for user/custom curves and degamma ROM settings doesn't apply to cursor plane. To get DRM legacy gamma working as expected, enable cursor degamma ROM for implict sRGB degamma on HW with this configuration. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2803 Fixes: 96b020e2 ("drm/amd/display: check attr flag before set cursor degamma on DCN3+") Signed-off-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
-
Yifan Zhang authored
Use amdgpu_gmc_vram_pa to simplify codes. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
-
Yifan Zhang authored
If vcn is disabled in kernel parameters, don't touch vcn, otherwise it may cause vcn hang. v2: delete unnecessary logs v3: move "is_vcn_enabled" check to smu_dpm_setvcn/jpeg_enable (Evan) Signed-off-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Hamza Mahfooz authored
Since, calling dcn20_adjust_freesync_v_startup() on DCN3.1+ ASICs can cause the display to flicker and underflow to occur, we shouldn't call it for them. So, ensure that the DCN version is less than DCN_VERSION_3_1 before calling dcn20_adjust_freesync_v_startup(). Cc: stable@vger.kernel.org Reviewed-by:
Fangzhi Zuo <jerry.zuo@amd.com> Signed-off-by:
-
Dembskiy Igor authored
It does not make sense to compare a pointer to array element with NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 65d38262 ("drm/amd/display: fbc state could not reach while enable fbc") Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Dembskiy Igor <dii@itb.spb.ru> Signed-off-by:
-
Hamza Mahfooz authored
This reverts commit 3a31e8b8. We still need to call dcn20_adjust_freesync_v_startup() for older DCN3+ ASICs. Otherwise, it can cause DP to HDMI 2.1 PCONs to fail to light up. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2809Reviewed-by:
-
- 31 Aug, 2023 4 commits
-
-
Evan Quan authored
This reverts commit 510d242f. The enablement for the new OD mechanism completed. Also, the support for fan control related OD feature has been added via this new mechanism. Thus, it is time to bring back the SMU13 OD support. Signed-off-by:
-
Evan Quan authored
Add SMU13 fan minimum pwm OD setting support. Signed-off-by:
-
Evan Quan authored
Add SMU13 fan target temperature OD setting support. Signed-off-by:
-
Evan Quan authored
Add SMU13 fan acoustic target OD setting support. Signed-off-by:
-
