- 18 Apr, 2024 15 commits
-
-
Peter Ujfalusi authored
Add AZX_DCAPS_PIO_COMMANDS quirk (bit 31) and use_pio_for_commands flag to be able to select PIO mode as alternative for CORB based command sending while retaining the RIRB functionality to receive unsolicited responses. This mode differs from the azx single_cmd mode when RIRB is disabled. The mixed mode is needed on Lunar Lake family because it is recommended to use Immediate Command Response (PIO mode) instead of CORB for HDA commands. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Liam Girdwood <liam.r.girdwood@intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Message-ID: <20240409083812.14001-2-peter.ujfalusi@linux.intel.com>
-
Geoffrey D. Bennett authored
The Vocaster Two has a Bluetooth module with a volume control. Add a corresponding ALSA mixer control. Signed-off-by:
Geoffrey D. Bennett <g@b4.vu> Signed-off-by:
-
Geoffrey D. Bennett authored
The Scarlett 4th Gen and Vocaster interfaces allow the autogain target dBFS value(s) to be configured. Add Mean and Peak Target controls for 4th Gen, and a Hot Target control for Vocaster. Signed-off-by:
-
Geoffrey D. Bennett authored
Add Focusrite Vocaster One and Two USB IDs, notification arrays, config sets, and device info data. Signed-off-by:
-
Geoffrey D. Bennett authored
Add filter and compressor DSP controls for the Vocaster interfaces. Mark scarlett2_notify_input_dsp() as __always_unused until it gets used when the Vocaster callback function array is added. Signed-off-by:
-
Geoffrey D. Bennett authored
Add controls for the input mute switches that the Vocaster interfaces have. Mark scarlett2_notify_input_mute() as __always_unused until it gets used when the Vocaster callback function array is added. Signed-off-by:
-
Geoffrey D. Bennett authored
The autogain status texts are different for Vocaster vs. Scarlett 4th Gen, so make them configurable per-config-set. Signed-off-by:
-
Geoffrey D. Bennett authored
Remove the #define SCARLETT2_MAX_GAIN_DB and replace with a per-config-set TLV as the Vocaster has a maximum gain of 70dB vs the 4th Gen 69dB. Signed-off-by:
-
Geoffrey D. Bennett authored
The 4th Gen Scarlett interfaces added software-controllable input gain along with channel select, channel link, auto-gain, and "safe" mode. Vocaster has software-controllable input gain and auto-gain but not channel select, channel link, or safe mode. Add a device info field safe_input_count to indicate how many channels have a safe mode control, and use the presence of the input select and input link switch configuration parameters to determine if those controls should be created. Signed-off-by:
-
Geoffrey D. Bennett authored
Update scarlett2_usb_get_config() to support 32-bit values which are needed by the upcoming Vocaster support. Signed-off-by:
-
Geoffrey D. Bennett authored
scarlett2_usb_set_config() was using size = 0 as a signal to use the parameter buffer. Replace that with an explicit indication (pbuf = 1), as the upcoming Vocaster support has a config item written via the parameter buffer with size = 1 rather than the implicit size of 8. Signed-off-by:
-
Geoffrey D. Bennett authored
The location pointed to by gen4_write_addr and gen4_write_addr + 1 is officially known as the parameter buffer. Update the code to match. Signed-off-by:
-
Geoffrey D. Bennett authored
Add hwdep read op so flash segments can be read. Signed-off-by:
-
Geoffrey D. Bennett authored
After scarlett2_usb() sends a command, it seems that we should wait for an ACK before attempting to read the response. Not doing that didn't seem necessary previously but seems to be causing occasional issues with 4th Gen devices. Signed-off-by:
-
Geoffrey D. Bennett authored
So that more forward declarations won't be required when we add handling of the ACK notification, move the initialisation functions to after the notification functions. Signed-off-by:
-
- 07 Apr, 2024 20 commits
-
-
Takashi Iwai authored
Pull emu10k1 fix patch series Signed-off-by: -
Oswald Buddenhagen authored
Both drivers provide both sample_new and sample_free, and it makes no sense to pretend that they could not. In fact, load_data() would already crash if sample_new was null. So remove the remaining null checks. Contrary to that, the emu10k1 driver actually has a null sample_reset, though I'm not convinced that this inconsistency is justified. Signed-off-by:
Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Message-ID: <20240406064830.1029573-18-oswald.buddenhagen@gmx.de> Signed-off-by:
-
Oswald Buddenhagen authored
There is no need for it to be 32 samples - 3 will do just fine (which is the interpolator's epsilon). The old size was presumably meant to compensate for the cache's presence, but we're now handling that properly. Signed-off-by:
-
Oswald Buddenhagen authored
Compensate for the cache lag of 64 frames, and actually populate the cache. Without these, the playback would start with garbage (which would be (mostly?) masqueraded by the note's attack phase). Note that we set the starting address only 61 frames ahead, to compensate for the interpolator's epsilon. Unlike for PCM playback, we don't even need to manually silence-fill the first frames in the cache, because we insert some silence in front of each sample anyway. A challenge are extremely short samples with a loop end below the cache size, because a) we'd have to wrap the current address to be within the loop and b) automatic pre-filling of the cache with the right data does not work in this case. We could pre-fill the cache manually, but that's slow, requires additional code for each sample width, and is made even more complex by the driver's virtual address space having no contiguous mapping for the CPU. We could have the engine fill the cache piece-wise (which is really what happens when playback is running), but that would also be complex, and we'd need to wait for the engine to handle each piece, so it wouldn't be that much faster than the manual fill. For the case of requiring only one loop iteration prior to reaching the cache size, we could leverage the engine's looping mechanism around CCR_CACHELOOPFLAG, but this special case doesn't seem worth the complexity. So we just unroll the loop as far as necessary to be able to play back the sample without any fiddling. Pedantically, this would be incorrect for loop-until-release samples with a low loop end which are released very quickly, but that would be relatively harmless, is not a plausible use case in the first place, and SoundFont sample mode 3 isn't actually implemented anyway (it's conflated with mode 1, infinite looping). Signed-off-by:
-
Oswald Buddenhagen authored
Resulting from more reverse engineering in the course of debugging. Signed-off-by:
-
Oswald Buddenhagen authored
Instead of repeatedly checking the sample width, assign a size shift centrally. Signed-off-by:
-
Oswald Buddenhagen authored
The offsets are counted in samples, not in bytes. While the code block is being rewritten, also move it up a bit, to avoid churn in a subsequent patch. Signed-off-by:
-
Oswald Buddenhagen authored
This de-duplicates the code slightly. But the real reason is that it moves the code up, which the next patch will depend on. Signed-off-by:
-
Oswald Buddenhagen authored
Samples are byte-sized in this mode, and thus the offset calculation needs no shifting. Signed-off-by:
-
Oswald Buddenhagen authored
The hardware supports S16LE and U8 samples, while U16LE and S8 (which the driver implicitly claims to support) require sign flipping. Note that this matters only for the GUS patch loader, as the implemented SoundFont v2.01 spec is limited to S16LE. Signed-off-by:
-
Oswald Buddenhagen authored
Convert some checks in snd_emu10k1_sample_new() back into assertions (as they were prior to da3cec35 (ALSA: Kill snd_assert() in sound/pci/*, 2008-08-08)), and move them into the low-level memory access functions they protect. Signed-off-by:
-
Oswald Buddenhagen authored
In load_data(), make the validation of and skipping over the main info block match that in load_guspatch(). In load_guspatch(), add checking that the specified patch length matches the actually supplied data, like load_data() already did. Signed-off-by:
-
Oswald Buddenhagen authored
This does several closely related things: - Move the code from the drivers into the SoundFont loader, which de-duplicates it. - Sort of explain the weird "recalculate address offset" feature. Note that I don't think it actually makes any sense - the calling user space code should do that. The background is certainly that the source data (the SoundFont format) uses pointers into a single wave block (and the API allows doing the same for on-board ROM), but the API expects the wave data from user space to be pre-chopped into individual patches anyway. - Make sure that the specified offsets actually lie within the supplied wave data. Note that we don't validate ROM offsets, so one can play back anything within the sound card's address space. - In load_guspatch(), don't call the sample_new callback anymore when the patch size is zero, as was already the case in load_data(). The callbacks would instantly return in that case anyway; these checks are now removed. Signed-off-by:
-
Oswald Buddenhagen authored
This is required only to implement WAVE_BIDIR_LOOP and WAVE_LOOP_BACK in the GUS patch loader. It has not worked on emu10k1 since before ALSA hit mainline, yet nobody appears to have complained. And as it isn't super easy to implement, just admit defeat and clean up the code. If somebody wanted to resurrect the feature, the emu8k driver could serve as a template, but the code would be quite different. But arguably, this should be done in user space in the first place, as this doesn't represent a hardware feature (somewhat ironically, the actual GUS driver has no synth support, and therefore no GUS patch loader). Note that instead of properly rejecting affected samples, we continue to just pretend that the feature wasn't requested. This is extremely questionable behavior, but avoids that possibly unused instruments suddenly prevent loading the entire file, which would break backwards compatibility. But at least we log a warning now. Signed-off-by:
-
Oswald Buddenhagen authored
The field is explicitly documented to be initialized by the driver (which it actually is). Also, using patch_info.size would be actually wrong for 16-bit data, as one field counts samples, while the other counts bytes. load_guspatch() already did it right. Signed-off-by:
-
Oswald Buddenhagen authored
Both bounds had off-by-one errors. Signed-off-by:
-
Oswald Buddenhagen authored
The `client` parameter was not used, so eliminate it from the call chain. Signed-off-by:
-
Oswald Buddenhagen authored
We forgot to remember the wavetable /proc entry, so we'd fail to free it at module unload. This matters only when only the synth module is unloaded, as unloading the card driver would tear down the sub-entry anyway. Signed-off-by:
-
Shenghao Ding authored
Calibrated data was written into an incorrect register, which cause speaker protection sometimes malfuctions Fixes: 5be27f1e ("ALSA: hda/tas2781: Add tas2781 HDA driver") Signed-off-by:
Shenghao Ding <shenghao-ding@ti.com> Cc: <stable@vger.kernel.org> Message-ID: <20240406132010.341-1-shenghao-ding@ti.com> Signed-off-by:
-
Vitaly Rodionov authored
Add support for HP SnowWhite laptops with CS35L51 amplifiers on I2C bus connected to Realtek codec. Signed-off-by:
Vitaly Rodionov <vitalyr@opensource.cirrus.com> Message-ID: <20240405210635.22193-1-vitalyr@opensource.cirrus.com> Signed-off-by:
-
- 05 Apr, 2024 1 commit
-
-
Takashi Iwai authored
Merge tag 'asoc-fix-v6.9-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.9 A relatively large set of fixes here, the biggest piece of it is a series correcting some problems with the delay reporting for Intel SOF cards but there's a bunch of other things. Everything here is driver specific except for a fix in the core for an issue with sign extension handling volume controls.
-
- 04 Apr, 2024 2 commits
-
-
Chaitanya Kumar Borah authored
In cases where the sof driver is unable to find the firmware and/or topology file [1], it exits without releasing the i915 runtime pm wakeref [2]. This results in dmesg warnings[3] during suspend/resume or driver unbind. Add remove_late() to the failure path of sof_init_environment so that i915 wakeref is released appropriately [1] [ 8.990366] sof-audio-pci-intel-mtl 0000:00:1f.3: SOF firmware and/or topology file not found. [ 8.990396] sof-audio-pci-intel-mtl 0000:00:1f.3: Supported default profiles [ 8.990398] sof-audio-pci-intel-mtl 0000:00:1f.3: - ipc type 1 (Requested): [ 8.990399] sof-audio-pci-intel-mtl 0000:00:1f.3: Firmware file: intel/sof-ipc4/mtl/sof-mtl.ri [ 8.990401] sof-audio-pci-intel-mtl 0000:00:1f.3: Topology file: intel/sof-ace-tplg/sof-mtl-rt711-2ch.tplg [ 8.990402] sof-audio-pci-intel-mtl 0000:00:1f.3: Check if you have 'sof-firmware' package installed. [ 8.990403] sof-audio-pci-intel-mtl 0000:00:1f.3: Optionally it can be manually downloaded from: [ 8.990404] sof-audio-pci-intel-mtl 0000:00:1f.3: https://github.com/thesofproject/sof-bin/ [ 8.999088] sof-audio-pci-intel-mtl 0000:00:1f.3: error: sof_probe_work failed err: -2 [2] ref_tracker: 0000:00:02.0@ffff9b8511b6a378 has 1/5 users at track_intel_runtime_pm_wakeref.part.0+0x36/0x70 [i915] __intel_runtime_pm_get+0x51/0xb0 [i915] intel_runtime_pm_get+0x17/0x20 [i915] intel_display_power_get+0x2f/0x70 [i915] i915_audio_component_get_power+0x23/0x120 [i915] snd_hdac_display_power+0x89/0x130 [snd_hda_core] hda_codec_i915_init+0x3f/0x50 [snd_sof_intel_hda] hda_dsp_probe_early+0x170/0x250 [snd_sof_intel_hda_common] snd_sof_device_probe+0x224/0x320 [snd_sof] sof_pci_probe+0x15b/0x220 [snd_sof_pci] hda_pci_intel_probe+0x30/0x70 [snd_sof_intel_hda_common] local_pci_probe+0x4c/0xb0 pci_device_probe+0xcc/0x250 really_probe+0x18e/0x420 __driver_probe_device+0x7e/0x170 driver_probe_device+0x23/0xa0 [3] [ 484.105070] ------------[ cut here ]------------ [ 484.108238] thunderbolt 0000:00:0d.2: PM: pci_pm_suspend_late+0x0/0x50 returned 0 after 0 usecs [ 484.117106] i915 0000:00:02.0: i915 raw-wakerefs=1 wakelocks=1 on cleanup [ 484.792005] WARNING: CPU: 2 PID: 2405 at drivers/gpu/drm/i915/intel_runtime_pm.c:444 intel_runtime_pm_driver_release+0x6c/0x80 Tested-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://github.com/thesofproject/linux/pull/4878Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Vijendar Mukunda authored
Before ACP firmware loading, DSP interrupts are not expected. Sometimes after reboot, it's observed that before ACP firmware is loaded false DSP interrupt is reported. Registering the interrupt handler before acp initialization causing false interrupts sometimes on reboot as ACP reset is not applied. Correct the sequence by invoking acp initialization sequence prior to registering interrupt handler. Fixes: 738a2b5e ("ASoC: SOF: amd: Add IPC support for ACP IP block") Signed-off-by:
Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://msgid.link/r/20240404041717.430545-1-Vijendar.Mukunda@amd.comSigned-off-by:
-
- 03 Apr, 2024 2 commits
-
-
Peter Ujfalusi authored
During probe the DMIC/SSP offload is enabled and it is not reversed on remove. Add a remove wrapper for LNL to disable the offload for DMIC and SSP similarly to what is done during probe. Signed-off-by:
-
Mark Brown authored
This v6.8 change didn't make it into the release, send it as a fix for v6.9.
-
