- 20 May, 2011 40 commits
-
-
Teresa Gámez authored
The setup of the pixel clock is done wrong in the mt9v022 driver. The 'Invert Pixel Clock' bit has to be set to 1 for falling edge and not for rising. This is not clearly described in the data sheet. Tested on pcm037 and pcm027/pcm990. Signed-off-by:
Teresa Gámez <t.gamez@phytec.de> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Guennadi Liakhovetski authored
soc_mbus_get_fmtdesc() returning NULL means only, that no standard mediabus code -> fourcc conversion is known, this shouldn't be treated as an error by drivers. Signed-off-by:
-
Guennadi Liakhovetski authored
Add new look-up entries for all mediabus codes, for which respective fourcc codes exist. Signed-off-by:
-
Guennadi Liakhovetski authored
12-bit formats, similar to YUV 4:2:0 occupy 3 bytes for each two pixels and cannot be described by any of the existing SOC_MBUS_PACKING_* macros. This patch adds a new one SOC_MBUS_PACKING_1_5X8 to describe such formats and extends soc_mbus_samples_per_pixel() to support it. Signed-off-by:
-
Guennadi Liakhovetski authored
Since V4L2_MBUS_FMT_* codes have become large and sparse, they cannot be used as array indices anymore. Signed-off-by:
-
Guennadi Liakhovetski authored
Recently mediabus pixel format codes have become a part of the user- space API, at which time their values also have been changed from contiguous numbers, running from 0 to sparse numbers with values around 0x1000, 0x2000, 0x3000... This made them unsuitable for the use as array indices. This patch switches soc-camera internal format look-ups to not depend on values of those macros. Signed-off-by:
-
Kassey Li authored
Signed-off-by:
Kassey Lee <ygli@marvell.com> Signed-off-by:
Qing Xu <qingx@marvell.com> Signed-off-by:
-
Kassey Li authored
Signed-off-by:
-
Guennadi Liakhovetski authored
PRELIMINARY: break out spinlock changes; consider multiple completing feames, causing multiple complete() calles. Add live crop support to the sh_mobile_ceu driver. Signed-off-by:
-
Guennadi Liakhovetski authored
Add an soc-camera host livecrop operation to implement live zoom. If a host driver implements it, it should take care to preserve output frame format, then live crop doesn't break streaming. Signed-off-by:
-
Guennadi Liakhovetski authored
The .stop_streaming() videobuf2 operation has to be implemented to guarantee, that video buffers are not written to after a STREAMOFF. Signed-off-by:
-
Guennadi Liakhovetski authored
The .stop_streaming() videobuf2 operation has to be implemented to guarantee, that video buffers are not written to after a STREAMOFF. Signed-off-by:
-
Sylwester Nawrocki authored
Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Add the subdev driver for the MIPI CSIS units available in S5P and Exynos4 SoC series. This driver supports both CSIS0 and CSIS1 MIPI-CSI2 receivers. The driver requires Runtime PM to be enabled for proper operation. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Sylwester Nawrocki authored
s5p-fimc now also implements a camera capture video node so move it under the "Video capture devices" Kconfig menu. Also update the entry to reflect the driver's coverage of EXYNOS4 SoCs and separate the Makefile entry from the soc-camera drivers set. Signed-off-by:
-
Sylwester Nawrocki authored
Add V4L2_MBUS_FMT_JPEG_1X8 format and the corresponding Docbook documentation. Signed-off-by:
-
Antonio Ospite authored
Use the expression "video stream" instead of "color camera" which is more correct as the driver supports the RGB and IR image on the same endpoint. Signed-off-by:
Antonio Ospite <ospite@studenti.unina.it> Signed-off-by:
-
Drew Fisher authored
Signed-off-by:
Drew Fisher <drew.m.fisher@gmail.com> Signed-off-by:
-
Drew Fisher authored
Move large communications buffers out of stack and into device structure. This prevents the frame size from being >1kB and fixes a compiler warning when CONFIG_FRAME_WARN=1024: drivers/media/video/gspca/kinect.c: In function ‘send_cmd.clone.0’: drivers/media/video/gspca/kinect.c:202: warning: the frame size of 1548 bytes is larger than 1024 bytes Reported-by:
-
Andreas Oberritter authored
- Return values should not be ORed. Abort early instead. - Return -EINVAL instead of -1. Signed-off-by:
Andreas Oberritter <obi@linuxtv.org> Signed-off-by:
-
Oliver Endriss authored
Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Olivier Grenie authored
This patch removes the remaining on-stack buffer for USB DMA transfer. This patch also reduces the stack memory usage. Cc: stable@kernel.org Cc: Florian Mickler <florian@mickler.org> Signed-off-by:
Olivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by:
Patrick Boettcher <patrick.boettcher@dibcom.fr> Signed-off-by:
-
Daniel Drake authored
This fixes autoloading of the module. Signed-off-by:
Daniel Drake <dsd@laptop.org> Acked-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Simon Farnsworth authored
I misused the ktime API, and failed to remove some traces of the in-kernel format conversion. Fix these, so the the driver builds without warnings. Signed-off-by:
Simon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by:
-
Laurent Pinchart authored
Move the public API definitions to include/linux/uvcvideo.h and bump the version number to 1.1.0. Compatibility with the old API is kept, application can still be compiled against the private header and will not break. Signed-off-by:
-
Laurent Pinchart authored
Instead of passing the value down to the device and getting an error back (or worse, crashing the firmware), return -ERANGE when the requested menu entry is not supported. Signed-off-by:
-
Laurent Pinchart authored
Supported menu entries are reported by the device in response to the GET_RES query. Use the information to return -EINVAL to userspace for unsupported values when enumerating menu entries. Signed-off-by:
-
Laurent Pinchart authored
Set the FIX_BANDWIDTH quirk for the device. Signed-off-by:
-
Laurent Pinchart authored
The camera requires the PROBE_MINMAX quirk. Add a corresponding entry in the device IDs list Signed-off-by:
-
Laurent Pinchart authored
The TomTom navigation system used in the Sony XNV 660BT and 770BT reports an RGB565 (RGBP) format, support it in the driver. Signed-off-by:
-
Martin Rubli authored
This adds detailed documentation about the driver's extension unit control features. Part of it has been adopted from the dynctrl.txt that used to be available in the driver's previous Subversion repository. The documentation has been rewritten to match the current implementation, in particular to capture the new XU control support including UVCIOC_CTRL_QUERY. Signed-off-by:
Martin Rubli <martin_rubli@logitech.com> Signed-off-by:
-
Laurent Pinchart authored
This makes the public driver API more uniform, in preparation of moving uvcvideo.h to include/linux. Keep the old names for backward compatibility with existing applications. Signed-off-by:
-
Laurent Pinchart authored
Those ioctls are deprecated, list them in the features removal schedule for 2.6.42. Signed-off-by:
-
Martin Rubli authored
This ioctl extends UVCIOC_CTRL_GET/SET by not only allowing to get/set XU controls but to also send arbitrary UVC commands to XU controls, namely GET_CUR, SET_CUR, GET_MIN, GET_MAX, GET_RES, GET_LEN, GET_INFO and GET_DEF. This is required for applications to work with XU controls, so that they can properly query the size and allocate the necessary buffers. Signed-off-by:
-
Simon Farnsworth authored
To simplify maintainer support of this driver, bump the version to 1.5.0 - this will be the first version that is expected to support mmap() for raw video frames. Signed-off-by:
Andy Walls <awalls@md.metrocast.net> Signed-off-by:
-
Simon Farnsworth authored
The initial version of this patch (commit d5976931639176bb6777755d96b9f8d959f79e9e) had some issues: * It didn't correctly calculate the size of the YUV buffer for 4:2:2, resulting in capture sometimes being offset by 1/3rd of a picture. * There were a lot of variables duplicating information the driver already knew, which have been removed. * There was an in-kernel format conversion - libv4l can do this one, and is the right place to do format conversions anyway. * Some magic numbers weren't properly explained. Fix all these issues, leaving just the move from videobuf to videobuf2 to do. Signed-off-by:
-
Mariusz Kozlowski authored
Currently 'fh' initialises to whatever happens to be on stack. This looks like a typo and this patch fixes that. Signed-off-by:
Mariusz Kozlowski <mk@lab.zgora.pl> Acked-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Antti Palosaari authored
Remove old DVB-T2 freq module param and detect DVB-T/T2 automatically. Implementation is trial and error, if DVB-T does not lock try DVB-T2 and vice versa. That's done by replacing normal DVBFE_ALGO_SW with DVBFE_ALGO_CUSTOM which gives better control for tuning process. DVB-C still uses normal software ZigZag, DVBFE_ALGO_SW. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Make checkpatch.pl happy by fixing whitespaces introduced by commit 79e8b8e3b8cbf67130247a3f6d25732373fe2f34 Signed-off-by:
-
