- 11 Sep, 2020 1 commit
-
-
Quentin Monnet authored
The function used to dump a map entry in bpftool is a bit difficult to follow, as a consequence to earlier refactorings. There is a variable ("num_elems") which does not appear to be necessary, and the error handling would look cleaner if moved to its own function. Let's clean it up. No functional change. v2: - v1 was erroneously removing the check on fd maps in an attempt to get support for outer map dumps. This is already working. Instead, v2 focuses on cleaning up the dump_map_elem() function, to avoid similar confusion in the future. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200910102652.10509-2-quentin@isovalent.com
-
- 10 Sep, 2020 8 commits
-
-
Lorenz Bauer authored
Add a test that exercises a basic sockmap / sockhash iteration. For now we simply count the number of elements seen. Once sockmap update from iterators works we can extend this to perform a full copy. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200909162712.221874-4-lmb@cloudflare.com
-
Lorenz Bauer authored
Add bpf_iter support for sockmap / sockhash, based on the bpf_sk_storage and hashtable implementation. sockmap and sockhash share the same iteration context: a pointer to an arbitrary key and a pointer to a socket. Both pointers may be NULL, and so BPF has to perform a NULL check before accessing them. Technically it's not possible for sockhash iteration to yield a NULL socket, but we ignore this to be able to use a single iteration point. Iteration will visit all keys that remain unmodified during the lifetime of the iterator. It may or may not visit newly added ones. Switch from using rcu_dereference_raw to plain rcu_dereference, so we gain another guard rail if CONFIG_PROVE_RCU is enabled. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200909162712.221874-3-lmb@cloudflare.com
-
Lorenz Bauer authored
The lookup paths for sockmap and sockhash currently include a check that returns NULL if the socket we just found is not a full socket. However, this check is not necessary. On insertion we ensure that we have a full socket (caveat around sock_ops), so request sockets are not a problem. Time-wait sockets are allocated separate from the original socket and then fed into the hashdance. They don't affect the sockets already stored in the sockmap. Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200909162712.221874-2-lmb@cloudflare.com
-
Quentin Monnet authored
Nearly all man pages for bpftool have the same common set of option flags (--help, --version, --json, --pretty, --debug). The description is duplicated across all the pages, which is more difficult to maintain if the description of an option changes. It may also be confusing to sort out what options are not "common" and should not be copied when creating new manual pages. Let's move the description for those common options to a separate file, which is included with a RST directive when generating the man pages. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200909162500.17010-3-quentin@isovalent.com
-
Quentin Monnet authored
Bpftool has a number of features that can be included or left aside during compilation. This includes: - Support for libbfd, providing the disassembler for JIT-compiled programs. - Support for BPF skeletons, used for profiling programs or iterating on the PIDs of processes associated with BPF objects. In order to make it easy for users to understand what features were compiled for a given bpftool binary, print the status of the two features above when showing the version number for bpftool ("bpftool -V" or "bpftool version"). Document this in the main manual page. Example invocations: $ bpftool version ./bpftool v5.9.0-rc1 features: libbfd, skeletons $ bpftool -p version { "version": "5.9.0-rc1", "features": { "libbfd": true, "skeletons": true } } Some other parameters are optional at compilation ("DISASM_FOUR_ARGS_SIGNATURE", LIBCAP support) but they do not impact significantly bpftool's behaviour from a user's point of view, so their status is not reported. Available commands and supported program types depend on the version number, and are therefore not reported either. Note that they are already available, albeit without JSON, via bpftool's help messages. v3: - Use a simple list instead of boolean values for plain output. v2: - Fix JSON (object instead or array for the features). Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200909162500.17010-2-quentin@isovalent.com
-
Quentin Monnet authored
eBPF selftests include a script to check that bpftool builds correctly with different command lines. Let's add one build for bpftool's documentation so as to detect errors or warning reported by rst2man when compiling the man pages. Also add a build to the selftests Makefile to make sure we build bpftool documentation along with bpftool when building the selftests. This also builds and checks warnings for the man page for eBPF helpers, which is built along bpftool's documentation. This change adds rst2man as a dependency for selftests (it comes with Python's "docutils"). v2: - Use "--exit-status=1" option for rst2man instead of counting lines from stderr. - Also build bpftool as part as the selftests build (and not only when the tests are actually run). Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200909162251.15498-3-quentin@isovalent.com
-
Quentin Monnet authored
To build man pages for bpftool (and for eBPF helper functions), rst2man can log different levels of information. Let's make it log all levels to keep the RST files clean. Doing so, rst2man complains about double colons, used for literal blocks, that look like underlines for section titles. Let's add the necessary blank lines. v2: - Use "--verbose" instead of "-r 1" (same behaviour but more readable). - Pass it through a RST2MAN_OPTS variable so we can easily pass other options too. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200909162251.15498-2-quentin@isovalent.com
-
Chen Zhou authored
Remove duplicate headers which are included twice. Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200908132201.184005-1-chenzhou10@huawei.com
-
- 09 Sep, 2020 4 commits
-
-
Andrii Nakryiko authored
Switch from deprecated bpf_program__title() API to bpf_program__section_name(). Also drop unnecessary error checks because neither bpf_program__title() nor bpf_program__section_name() can fail or return NULL. Fixes: 52109584 ("libbpf: Deprecate notion of BPF program "title" in favor of "section name"") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/bpf/20200908180127.1249-1-andriin@fb.com
-
Yonghong Song authored
Andrii reported that with latest clang, when building selftests, we have error likes: error: progs/test_sysctl_loop1.c:23:16: in function sysctl_tcp_mem i32 (%struct.bpf_sysctl*): Looks like the BPF stack limit of 512 bytes is exceeded. Please move large on stack variables into BPF per-cpu array map. The error is triggered by the following LLVM patch: https://reviews.llvm.org/D87134 For example, the following code is from test_sysctl_loop1.c: static __always_inline int is_tcp_mem(struct bpf_sysctl *ctx) { volatile char tcp_mem_name[] = "net/ipv4/tcp_mem/very_very_very_very_long_pointless_string"; ... } Without the above LLVM patch, the compiler did optimization to load the string (59 bytes long) with 7 64bit loads, 1 8bit load and 1 16bit load, occupying 64 byte stack size. With the above LLVM patch, the compiler only uses 8bit loads, but subregister is 32bit. So stack requirements become 4 * 59 = 236 bytes. Together with other stuff on the stack, total stack size exceeds 512 bytes, hence compiler complains and quits. To fix the issue, removing "volatile" key word or changing "volatile" to "const"/"static const" does not work, the string is put in .rodata.str1.1 section, which libbpf did not process it and errors out with libbpf: elf: skipping unrecognized data section(6) .rodata.str1.1 libbpf: prog 'sysctl_tcp_mem': bad map relo against '.L__const.is_tcp_mem.tcp_mem_name' in section '.rodata.str1.1' Defining the string const as global variable can fix the issue as it puts the string constant in '.rodata' section which is recognized by libbpf. In the future, when libbpf can process '.rodata.str*.*' properly, the global definition can be changed back to local definition. Defining tcp_mem_name as a global, however, triggered a verifier failure. ./test_progs -n 7/21 libbpf: load bpf program failed: Permission denied libbpf: -- BEGIN DUMP LOG --- libbpf: invalid stack off=0 size=1 verification time 6975 usec stack depth 160+64 processed 889 insns (limit 1000000) max_states_per_insn 4 total_states 14 peak_states 14 mark_read 10 libbpf: -- END LOG -- libbpf: failed to load program 'sysctl_tcp_mem' libbpf: failed to load object 'test_sysctl_loop2.o' test_bpf_verif_scale:FAIL:114 #7/21 test_sysctl_loop2.o:FAIL This actually exposed a bpf program bug. In test_sysctl_loop{1,2}, we have code like const char tcp_mem_name[] = "<...long string...>"; ... char name[64]; ... for (i = 0; i < sizeof(tcp_mem_name); ++i) if (name[i] != tcp_mem_name[i]) return 0; In the above code, if sizeof(tcp_mem_name) > 64, name[i] access may be out of bound. The sizeof(tcp_mem_name) is 59 for test_sysctl_loop1.c and 79 for test_sysctl_loop2.c. Without promotion-to-global change, old compiler generates code where the overflowed stack access is actually filled with valid value, so hiding the bpf program bug. With promotion-to-global change, the code is different, more specifically, the previous loading constants to stack is gone, and "name" occupies stack[-64:0] and overflow access triggers a verifier error. To fix the issue, adjust "name" buffer size properly. Reported-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200909171542.3673449-1-yhs@fb.com
-
Yonghong Song authored
Change selftest map_ptr_kern.c with disabling inlining for one of subtests, which will fail the test without previous verifier change. Also added to verifier test for both "map_ptr += scalar" and "scalar += map_ptr" arithmetic. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200908175703.2463721-1-yhs@fb.com
-
Yonghong Song authored
Commit 41c48f3a ("bpf: Support access to bpf map fields") added support to access map fields with CORE support. For example, struct bpf_map { __u32 max_entries; } __attribute__((preserve_access_index)); struct bpf_array { struct bpf_map map; __u32 elem_size; } __attribute__((preserve_access_index)); struct { __uint(type, BPF_MAP_TYPE_ARRAY); __uint(max_entries, 4); __type(key, __u32); __type(value, __u32); } m_array SEC(".maps"); SEC("cgroup_skb/egress") int cg_skb(void *ctx) { struct bpf_array *array = (struct bpf_array *)&m_array; /* .. array->map.max_entries .. */ } In kernel, bpf_htab has similar structure, struct bpf_htab { struct bpf_map map; ... } In the above cg_skb(), to access array->map.max_entries, with CORE, the clang will generate two builtin's. base = &m_array; /* access array.map */ map_addr = __builtin_preserve_struct_access_info(base, 0, 0); /* access array.map.max_entries */ max_entries_addr = __builtin_preserve_struct_access_info(map_addr, 0, 0); max_entries = *max_entries_addr; In the current llvm, if two builtin's are in the same function or in the same function after inlining, the compiler is smart enough to chain them together and generates like below: base = &m_array; max_entries = *(base + reloc_offset); /* reloc_offset = 0 in this case */ and we are fine. But if we force no inlining for one of functions in test_map_ptr() selftest, e.g., check_default(), the above two __builtin_preserve_* will be in two different functions. In this case, we will have code like: func check_hash(): reloc_offset_map = 0; base = &m_array; map_base = base + reloc_offset_map; check_default(map_base, ...) func check_default(map_base, ...): max_entries = *(map_base + reloc_offset_max_entries); In kernel, map_ptr (CONST_PTR_TO_MAP) does not allow any arithmetic. The above "map_base = base + reloc_offset_map" will trigger a verifier failure. ; VERIFY(check_default(&hash->map, map)); 0: (18) r7 = 0xffffb4fe8018a004 2: (b4) w1 = 110 3: (63) *(u32 *)(r7 +0) = r1 R1_w=invP110 R7_w=map_value(id=0,off=4,ks=4,vs=8,imm=0) R10=fp0 ; VERIFY_TYPE(BPF_MAP_TYPE_HASH, check_hash); 4: (18) r1 = 0xffffb4fe8018a000 6: (b4) w2 = 1 7: (63) *(u32 *)(r1 +0) = r2 R1_w=map_value(id=0,off=0,ks=4,vs=8,imm=0) R2_w=invP1 R7_w=map_value(id=0,off=4,ks=4,vs=8,imm=0) R10=fp0 8: (b7) r2 = 0 9: (18) r8 = 0xffff90bcb500c000 11: (18) r1 = 0xffff90bcb500c000 13: (0f) r1 += r2 R1 pointer arithmetic on map_ptr prohibited To fix the issue, let us permit map_ptr + 0 arithmetic which will result in exactly the same map_ptr. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200908175702.2463625-1-yhs@fb.com
-
- 07 Sep, 2020 3 commits
-
-
Quentin Monnet authored
Synchronise the bpf.h header under tools, to report the fixes recently brought to the documentation for the BPF helpers. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200904161454.31135-4-quentin@isovalent.com
-
Quentin Monnet authored
Fix a formatting error in the description of bpf_load_hdr_opt() (rst2man complains about a wrong indentation, but what is missing is actually a blank line before the bullet list). Fix and harmonise the formatting for other helpers. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200904161454.31135-3-quentin@isovalent.com
-
Quentin Monnet authored
Fix a formatting error in the documentation for bpftool-link, so that the man page can build correctly. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200904161454.31135-2-quentin@isovalent.com
-
- 04 Sep, 2020 20 commits
-
-
Daniel T. Lee authored
This commit adds xsk_fwd test file to .gitignore which is newly added to samples/bpf. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200904063434.24963-2-danieltimlee@gmail.com
-
Daniel T. Lee authored
From commit 52109584 ("libbpf: Deprecate notion of BPF program "title" in favor of "section name""), the term title has been replaced with section name in libbpf. Since the bpf_program__title() has been deprecated, this commit switches this function to bpf_program__section_name(). Due to this commit, the compilation warning issue has also been resolved. Fixes: 52109584 ("libbpf: Deprecate notion of BPF program "title" in favor of "section name"") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200904063434.24963-1-danieltimlee@gmail.com
-
Andrii Nakryiko authored
Detected by LGTM static analyze in Github repo, fix potential multiplication overflow before result is casted to size_t. Fixes: 8505e870 ("libbpf: Implement generalized .BTF.ext func/line info adjustment") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200904041611.1695163-2-andriin@fb.com
-
Andrii Nakryiko authored
Another issue of __u64 needing either %lu or %llu, depending on the architecture. Fix with cast to `unsigned long long`. Fixes: 7e06aad5 ("libbpf: Add multi-prog section support for struct_ops") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200904041611.1695163-1-andriin@fb.com
-
Hao Luo authored
The returned value of bpf_object__open_file() should be checked with libbpf_get_error() rather than NULL. This fix prevents test_progs from crash when test_global_data.o is not present. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200903200528.747884-1-haoluo@google.com
-
Alexei Starovoitov authored
Andrii Nakryiko says: ==================== Currently, libbpf supports a limited form of BPF-to-BPF subprogram calls. The restriction is that entry-point BPF program should use *all* of defined sub-programs in BPF .o file. If any of the subprograms is not used, such entry-point BPF program will be rejected by verifier as containing unreachable dead code. This is not a big limitation for cases with single entry-point BPF programs, but is quite a heavy restriction for multi-programs that use only partially overlapping set of subprograms. This patch set removes all such restrictions and adds complete support for using BPF sub-program calls on BPF side. This is achieved through libbpf tracking subprograms individually and detecting which subprograms are used by any given entry-point BPF program, and subsequently only appending and relocating code for just those used subprograms. In addition, libbpf now also supports multiple entry-point BPF programs within the same ELF section. This allows to structure code so that there are few variants of BPF programs of the same type and attaching to the same target (e.g., for tracepoints and kprobes) without the need to worry about ELF section name clashes. This patch set opens way for more wider adoption of BPF subprogram calls, especially for real-world production use-cases with complicated net of subprograms. This will allow to further scale BPF verification process through good use of global functions, which can be verified independently. This is also important prerequisite for static linking which allows static BPF libraries to not worry about naming clashes for section names, as well as use static non-inlined functions (subprograms) without worries of verifier rejecting program due to dead code. Patch set is structured as follows: - patched 1-6 contain all the libbpf changes necessary to support multi-prog sections and bpf2bpf subcalls; - patch 7 adds dedicated selftests validating all combinations of possible sub-calls (within and across sections, static vs global functions); - patch 8 deprecated bpf_program__title() in favor of bpf_program__section_name(). The intent was to also deprecate bpf_object__find_program_by_title() as it's now non-sensical with multiple programs per section. But there were too many selftests uses of this and I didn't want to delay this patches further and make it even bigger, so left it for a follow up cleanup; - patches 9-10 remove uses for title-related APIs from bpftool and bpf_program__title() use from selftests; - patch 11 is converting fexit_bpf2bpf to have explicit subtest (it does contain 4 subtests, which are not handled as sub-tests); - patches 12-14 convert few complicated BPF selftests to use __noinline functions to further validate correctness of libbpf's bpf2bpf processing logic. v2->v3: - explained subprog relocation algorithm in more details (Alexei); - pyperf, strobelight and cls_redirect got new subprog variants, leaving other modes intact (Alexei); v1->v2: - rename DEPRECATED to LIBBPF_DEPRECATED to avoid name clashes; - fix test_subprogs build; - convert a bunch of complicated selftests to __noinline (Alexei). ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrii Nakryiko authored
As one of the most complicated and close-to-real-world programs, cls_redirect is a good candidate to exercise libbpf's logic of handling bpf2bpf calls. So add variant with using explicit __noinline for majority of functions except few most basic ones. If those few functions are inlined, verifier starts to complain about program instruction limit of 1mln instructions being exceeded, most probably due to instruction overhead of doing a sub-program call. Convert user-space part of selftest to have to sub-tests: with and without inlining. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20200903203542.15944-15-andriin@fb.com
-
Andrii Nakryiko authored
Update xdp_noinline to use BPF skeleton and force __noinline on helper sub-programs. Also, split existing logic into v4- and v6-only to complicate sub-program calling patterns (partially overlapped sets of functions for entry-level BPF programs). Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200903203542.15944-14-andriin@fb.com
-
Andrii Nakryiko authored
Add use of non-inlined subprogs to few bigger selftests to excercise libbpf's bpf2bpf handling logic. Also split l4lb_all selftest into two sub-tests. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200903203542.15944-13-andriin@fb.com
-
Andrii Nakryiko authored
There are clearly 4 subtests, so make it official. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200903203542.15944-12-andriin@fb.com
-
Andrii Nakryiko authored
BPF program title is ambigious and misleading term. It is ELF section name, so let's just call it that and deprecate bpf_program__title() API in favor of bpf_program__section_name(). Additionally, using bpf_object__find_program_by_title() is now inherently dangerous and ambiguous, as multiple BPF program can have the same section name. So deprecate this API as well and recommend to switch to non-ambiguous bpf_object__find_program_by_name(). Internally, clean up usage and mis-usage of BPF program section name for denoting BPF program name. Shorten the field name to prog->sec_name to be consistent with all other prog->sec_* variables. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200903203542.15944-11-andriin@fb.com
-
Andrii Nakryiko authored
Remove all uses of bpf_program__title() and bpf_program__find_program_by_title(). Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200903203542.15944-10-andriin@fb.com
-
Andrii Nakryiko authored
bpf_program__title() is deprecated, switch to bpf_program__section_name() and avoid compilation warnings. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200903203542.15944-9-andriin@fb.com
-
Andrii Nakryiko authored
Add a selftest excercising bpf-to-bpf subprogram calls, as well as multiple entry-point BPF programs per section. Also make sure that BPF CO-RE works for such set ups both for sub-programs and for multi-entry sections. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200903203542.15944-8-andriin@fb.com
-
Andrii Nakryiko authored
Adjust struct_ops handling code to work with multi-program ELF sections properly. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200903203542.15944-7-andriin@fb.com
-
Andrii Nakryiko authored
Complete multi-prog sections and multi sub-prog support in libbpf by properly adjusting .BTF.ext's line and function information. Mark exposed btf_ext__reloc_func_info() and btf_ext__reloc_func_info() APIs as deprecated. These APIs have simplistic assumption that all sub-programs are going to be appended to all main BPF programs, which doesn't hold in real life. It's unlikely there are any users of this API, as it's very libbpf internals-specific. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200903203542.15944-6-andriin@fb.com
-
Andrii Nakryiko authored
This patch implements general and correct logic for bpf-to-bpf sub-program calls. Only sub-programs used (called into) from entry-point (main) BPF program are going to be appended at the end of main BPF program. This ensures that BPF verifier won't encounter any dead code due to copying unreferenced sub-program. This change means that each entry-point (main) BPF program might have a different set of sub-programs appended to it and potentially in different order. This has implications on how sub-program call relocations need to be handled, described below. All relocations are now split into two categores: data references (maps and global variables) and code references (sub-program calls). This distinction is important because data references need to be relocated just once per each BPF program and sub-program. These relocation are agnostic to instruction locations, because they are not code-relative and they are relocating against static targets (maps, variables with fixes offsets, etc). Sub-program RELO_CALL relocations, on the other hand, are highly-dependent on code position, because they are recorded as instruction-relative offset. So BPF sub-programs (those that do calls into other sub-programs) can't be relocated once, they need to be relocated each time such a sub-program is appended at the end of the main entry-point BPF program. As mentioned above, each main BPF program might have different subset and differen order of sub-programs, so call relocations can't be done just once. Splitting data reference and calls relocations as described above allows to do this efficiently and cleanly. bpf_object__find_program_by_name() will now ignore non-entry BPF programs. Previously one could have looked up '.text' fake BPF program, but the existence of such BPF program was always an implementation detail and you can't do much useful with it. Now, though, all non-entry sub-programs get their own BPF program with name corresponding to a function name, so there is no more '.text' name for BPF program. This means there is no regression, effectively, w.r.t. API behavior. But this is important aspect to highlight, because it's going to be critical once libbpf implements static linking of BPF programs. Non-entry static BPF programs will be allowed to have conflicting names, but global and main-entry BPF program names should be unique. Just like with normal user-space linking process. So it's important to restrict this aspect right now, keep static and non-entry functions as internal implementation details, and not have to deal with regressions in behavior later. This patch leaves .BTF.ext adjustment as is until next patch. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200903203542.15944-5-andriin@fb.com
-
Andrii Nakryiko authored
Fix up CO-RE relocation code to handle relocations against ELF sections containing multiple BPF programs. This requires lookup of a BPF program by its section name and instruction index it contains. While it could have been done as a simple loop, it could run into performance issues pretty quickly, as number of CO-RE relocations can be quite large in real-world applications, and each CO-RE relocation incurs BPF program look up now. So instead of simple loop, implement a binary search by section name + insn offset. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200903203542.15944-4-andriin@fb.com
-
Andrii Nakryiko authored
Teach libbpf how to parse code sections into potentially multiple bpf_program instances, based on ELF FUNC symbols. Each BPF program will keep track of its position within containing ELF section for translating section instruction offsets into program instruction offsets: regardless of BPF program's location in ELF section, it's first instruction is always at local instruction offset 0, so when libbpf is working with relocations (which use section-based instruction offsets) this is critical to make proper translations. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200903203542.15944-3-andriin@fb.com
-
Andrii Nakryiko authored
libbpf ELF parsing logic might need symbols available before ELF parsing is completed, so we need to make sure that symbols table section is found in a separate pass before all the subsequent sections are processed. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200903203542.15944-2-andriin@fb.com
-
- 02 Sep, 2020 4 commits
-
-
Magnus Karlsson authored
Fix use-after-free when a shared umem bind fails. The code incorrectly tried to free the allocated buffer pool both in the bind code and then later also when the socket was released. Fix this by setting the buffer pool pointer to NULL after the bind code has freed the pool, so that the socket release code will not try to free the pool. This is the same solution as the regular, non-shared umem code path has. This was missing from the shared umem path. Fixes: b5aea28d ("xsk: Add shared umem support between queue ids") Reported-by: syzbot+5334f62e4d22804e646a@syzkaller.appspotmail.com Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/1599032164-25684-1-git-send-email-magnus.karlsson@intel.com
-
Gustavo A. R. Silva authored
Currently, dma_map is being checked, when the right object identifier to be null-checked is dma_map->dma_pages, instead. Fix this by null-checking dma_map->dma_pages. Fixes: 921b6869 ("xsk: Enable sharing of dma mappings") Addresses-Coverity-ID: 1496811 ("Logically dead code") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/20200902150750.GA7257@embeddedor
-
Magnus Karlsson authored
Fix possible segfault when entry is inserted into xskmap. This can happen if the socket is in a state where the umem has been set up, the Rx ring created but it has yet to be bound to a device. In this case the pool has not yet been created and we cannot reference it for the existence of the fill ring. Fix this by removing the whole xsk_is_setup_for_bpf_map function. Once upon a time, it was used to make sure that the Rx and fill rings where set up before the driver could call xsk_rcv, since there are no tests for the existence of these rings in the data path. But these days, we have a state variable that we test instead. When it is XSK_BOUND, everything has been set up correctly and the socket has been bound. So no reason to have the xsk_is_setup_for_bpf_map function anymore. Fixes: 7361f9c3 ("xsk: Move fill and completion rings to buffer pool") Reported-by: syzbot+febe51d44243fbc564ee@syzkaller.appspotmail.com Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/1599037569-26690-1-git-send-email-magnus.karlsson@intel.com
-
Magnus Karlsson authored
Fix possible segfault in the xsk diagnostics code when dumping information about the umem. This can happen when a umem has been created, but the socket has not been bound yet. In this case, the xsk buffer pool does not exist yet and we cannot dump the information that was moved from the umem to the buffer pool. Fix this by testing for the existence of the buffer pool and if not there, do not dump any of that information. Fixes: c2d3d6a4 ("xsk: Move queue_id, dev and need_wakeup to buffer pool") Fixes: 7361f9c3 ("xsk: Move fill and completion rings to buffer pool") Reported-by: syzbot+3f04d36b7336f7868066@syzkaller.appspotmail.com Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/1599036743-26454-1-git-send-email-magnus.karlsson@intel.com
-