Skip to content

L
linux
Switch branch/tag
  1. 09 May, 2020 7 commits
  3. 07 May, 2020 2 commits
  5. 05 May, 2020 1 commit
    • Tejun Heo's avatar
      iocost: protect iocg->abs_vdebt with iocg->waitq.lock · 0b80f986
      Tejun Heo authored 
      abs_vdebt is an atomic_64 which tracks how much over budget a given cgroup
is and controls the activation of use_delay mechanism. Once a cgroup goes
over budget from forced IOs, it has to pay it back with its future budget.
The progress guarantee on debt paying comes from the iocg being active -
active iocgs are processed by the periodic timer, which ensures that as time
passes the debts dissipate and the iocg returns to normal operation.

However, both iocg activation and vdebt handling are asynchronous and a
sequence like the following may happen.

1. The iocg is in the process of being deactivated by the periodic timer.

2. A bio enters ioc_rqos_throttle(), calls iocg_activate() which returns
   without anything because it still sees that the iocg is already active.

3. The iocg is deactivated.

4. The bio from #2 is over budget but needs to be forced. It increases
   abs_vdebt and goes over the threshold and enables use_delay.

5. IO control is enabled for the iocg's subtree and now IOs are attributed
   to the descendant cgroups and the iocg itself no longer issues IOs.

This leaves the iocg with stuck abs_vdebt - it has debt but inactive and no
further IOs which can activate it. This can end up unduly punishing all the
descendants cgroups.

The usual throttling path has the same issue - the iocg must be active while
throttled to ensure that future event will wake it up - and solves the
problem by synchronizing the throttling path with a spinlock. abs_vdebt
handling is another form of overage handling and shares a lot of
characteristics including the fact that it isn't in the hottest path.

This patch fixes the above and other possible races by strictly
synchronizing abs_vdebt and use_delay handling with iocg->waitq.lock.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Reported-by: default avatarVlad Dmitriev <vvd@fb.com>
Cc: stable@vger.kernel.org # v5.4+
Fixes: e1518f63 ("blk-iocost: Don't let merges push vtime into the future")
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      0b80f986
  7. 04 May, 2020 7 commits
  9. 30 Apr, 2020 6 commits
    • Tejun Heo's avatar
      iocost_monitor: drop string wrap around numbers when outputting json · 21f3cfea
      Tejun Heo authored 
      Wrapping numbers in strings is used by some to work around bit-width issues in
some enviroments. The problem isn't innate to json and the workaround seems to
cause more integration problems than help. Let's drop the string wrapping.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      21f3cfea
    • Tejun Heo's avatar
      iocost_monitor: exit successfully if interval is zero · f4fe3ea6
      Tejun Heo authored 
      This is to help external tools to decide whether iocost_monitor has all its
requirements met or not based on the exit status of an -i0 run.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      f4fe3ea6
    • Tejun Heo's avatar
      blk-iocost: account for IO size when testing latencies · cd006509
      Tejun Heo authored 
      On each IO completion, iocost decides whether the IO met or missed its latency
target. Currently, the targets are fixed numbers per IO type. While this can be
good enough for loose latency targets way higher than typical completion
latencies, the effect of IO size makes it difficult to tighten the latency
target - a target adequate for 4k IOs might be too tight for 512k IOs and
vice-versa.

iocost already has all the necessary information to account for different IO
sizes when testing whether the latency target is met as iocost can calculate the
size vtime cost of a given IO. This patch updates the completion path to
calculate the size vtime cost of the IO, deduct the nsec equivalent from the
observed latency and use the adjusted value to decide whether the target is met.

This makes latency targets independent from IO size and enables determining
adequate latency targets with fixed size fio runs.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      cd006509
    • Tejun Heo's avatar
      blk-iocost: switch to fixed non-auto-decaying use_delay · 54c52e10
      Tejun Heo authored 
      The use_delay mechanism was introduced by blk-iolatency to hold memory
allocators accountable for the reclaim and other shared IOs they cause. The
duration of the delay is dynamically balanced between iolatency increasing the
value on each target miss and it auto-decaying as time passes and threads get
delayed on it.

While this works well for iolatency, iocost's control model isn't compatible
with it. There is no repeated "violation" events which can be balanced against
auto-decaying. iocost instead knows how much a given cgroup is over budget and
wants to prevent that cgroup from issuing IOs while over budget. Until now,
iocost has been adding the cost of force-issued IOs. However, this doesn't
reflect the amount which is already over budget and is simply not enough to
counter the auto-decaying allowing anon-memory leaking low priority cgroup to
go over its alloted share of IOs.

As auto-decaying doesn't make much sense for iocost, this patch introduces a
different mode of operation for use_delay - when blkcg_set_delay() are used
insted of blkcg_add/use_delay(), the delay duration is not auto-decayed until it
is explicitly cleared with blkcg_clear_delay(). iocost is updated to keep the
delay duration synchronized to the budget overage amount.

With this change, iocost can effectively police cgroups which generate
significant amount of force-issued IOs.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      54c52e10
    • Christoph Hellwig's avatar
      block: remove the bd_openers checks in blk_drop_partitions · 10c70d95
      Christoph Hellwig authored 
      When replacing the bd_super check with a bd_openers I followed a logical
conclusion, which turns out to be utterly wrong.  When a block device has
bd_super sets it has a mount file system on it (although not every
mounted file system sets bd_super), but that also implies it doesn't even
have partitions to start with.

So instead of trying to come up with a logical check for all openers,
just remove the check entirely.

Fixes: d3ef5536 ("block: fix busy device checking in blk_drop_partitions")
Fixes: cb6b771b ("block: fix busy device checking in blk_drop_partitions again")
Reported-by: default avatarMichal Koutný <mkoutny@suse.com>
Reported-by: default avatarYang Xu <xuyang2018.jy@cn.fujitsu.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      10c70d95
    • Jens Axboe's avatar
      Merge branch 'nvme-5.7' of git://git.infradead.org/nvme into block-5.7 · 47ed39e0
      Jens Axboe authored 
      Pull NVMe fix from Christoph.

* 'nvme-5.7' of git://git.infradead.org/nvme:
  nvme: prevent double free in nvme_alloc_ns() error handling
      47ed39e0
  11. 29 Apr, 2020 5 commits
  13. 27 Apr, 2020 1 commit
    • Niklas Cassel's avatar
      nvme: prevent double free in nvme_alloc_ns() error handling · 132be623
      Niklas Cassel authored 
      When jumping to the out_put_disk label, we will call put_disk(), which will
trigger a call to disk_release(), which calls blk_put_queue().

Later in the cleanup code, we do blk_cleanup_queue(), which will also call
blk_put_queue().

Putting the queue twice is incorrect, and will generate a KASAN splat.

Set the disk->queue pointer to NULL, before calling put_disk(), so that the
first call to blk_put_queue() will not free the queue.

The second call to blk_put_queue() uses another pointer to the same queue,
so this call will still free the queue.

Fixes: 85136c01 ("lightnvm: simplify geometry enumeration")
Signed-off-by: default avatarNiklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      132be623
  15. 25 Apr, 2020 4 commits
  17. 24 Apr, 2020 2 commits
  19. 23 Apr, 2020 2 commits
    • Damien Le Moal's avatar
      null_blk: Cleanup zoned device initialization · d205bde7
      Damien Le Moal authored 
      Move all zoned mode related code from null_blk_main.c to
null_blk_zoned.c, avoiding an ugly #ifdef in the process.
Rename null_zone_init() into null_init_zoned_dev(), null_zone_exit()
into null_free_zoned_dev() and add the new function
null_register_zoned_dev() to finalize the zoned dev setup before
add_disk().
Signed-off-by: default avatarDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      d205bde7
    • Damien Le Moal's avatar
      null_blk: Fix zoned command handling · 9dd44c7e
      Damien Le Moal authored 
      For write operations issued to a null_blk device with zoned mode
enabled, the state and write pointer position of the zone targeted by
the command should be checked before badblocks and memory backing
are handled as the write may be first failed due to, for instance, a
sector position not aligned with the zone write pointer. This order of
checking for errors reflects more accuratly the behavior of physical
zoned devices.

Furthermore, the write pointer position of the target zone should be
incremented only and only if no errors are reported by badblocks and
memory backing handling.

To fix this, introduce the small helper function null_process_cmd()
which execute null_handle_badblocks() and null_handle_memory_backed()
and use this function in null_zone_write() to correctly handle write
requests to zoned null devices depending on the type and state of the
write target zone. Also call this function in null_handle_zoned() to
process read requests to zoned null devices.

null_process_cmd() is called directly from null_handle_cmd() for
regular null devices, resulting in no functional change for these type
of devices. To have symmetric names, the function null_handle_zoned()
is renamed to null_process_zoned_cmd().
Signed-off-by: default avatarDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: default avatarChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      9dd44c7e
  21. 22 Apr, 2020 3 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7