- 13 May, 2015 9 commits
-
-
Arnd Bergmann authored
Merge tag 'tegra-for-4.2-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Merge "ARM: tegra: Devicetree changes for v4.2-rc1" from Thierry Reding: Contains a couple of fixes and additions to device tree files. The most notable change is a fix for a misapplied patch that was only exposed by a recent change in the regulator subsystem that caused USB to break on Tegra124 recently. Other than that there are a more or less random assortment of additions to enable various features on a couple of boards. * tag 'tegra-for-4.2-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Fix hda2codec_2x clock and reset names ARM: tegra: Add Tegra30 HDA support ARM: tegra: Cardhu device-tree comment spelling fix ARM: tegra: venice2: Set min-/max-microvolt for VDD_LED supply ARM: tegra: venice2: Mark eMMC as non-removable ARM: tegra: jetson-tk1: Enable HDA support ARM: tegra: Add missing HDMI +5V regulator ARM: tegra: cardhu: Add power and volume keys ARM: tegra: Correct which USB controller has the UTMI pad registers
-
Arnd Bergmann authored
Merge tag 'socfpga_dts_for_v4.2_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt Merge "SoCFPGA update for v4.2 part 2" from Dinh Nguyen: - Add a DTS node for the A9 SCU * tag 'socfpga_dts_for_v4.2_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: dts: add the a9-scu node
-
Arnd Bergmann authored
Merge tag 'v4.2-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "ARM: rockchip: dts changes for 4.2" from Heiko Stuebner: Some misc improvements defining additional supply regulators, enabling the Cortex-A12 HW PMU on the rk3288 and the tsadc on some more rk3288 boards, as well as some usb properties and marking the radxarock pmic as system-power-controller. * tag 'v4.2-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add system-power-controller to act8846 on radxarock ARM: dts: rockchip: add properties for dwc2 usb otg controller ARM: dts: rockchip: enable tsadc on rk3288 boards ARM: dts: rockchip: add act8846 supplies on rk3288-firefly ARM: dts: rockchip: Specify VMMC and VQMMC on rk3288-evb ARM: dts: rockchip: Enable Cortex-A12 HW PMU events on rk3288
-
Dinh Nguyen authored
Add the dts node for the A9 SCU. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
-
Arnd Bergmann authored
Merge tag 'ux500-v4.2-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt Merge "Ux500 Device Tree changes for the v4.2 series" form Linus Walleij: Define CPU topology, connect that with CoreSight blocks, add sensor information to DT boards. * tag 'ux500-v4.2-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: add the sensors to the STUIB board ARM: ux500: assign the sensor trigger IRQs ARM: ux500: fix lsm303dlh magnetometer compat string ARM: ux500: add CoreSight blocks to DTS file ARM: ux500: define CPU topology
-
Linus Walleij authored
This adds the device tree data for the LIS331DL and the AK8974 magnetometer to the STUIB board device tree include file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
The ST sensors on the Ux500 boards were not utilizing the IRQs for data ready sample triggers. Enable this by assigning the right GPIO lines and interrupt lines (when the GPIO lines are used for IRQs) to the accelerometer, gyro and magnetometer sensors. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
The magnetometer found on the Ux500 TVK and Snowball boards is a LSM303DLH not a LSM303DLM, small differences but still different. Put in the right compatible strings and things start working smoothly. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
This registers all the CoreSight blocks on the DB8500 SoC: each core has a PTM (v1.0, r1p0-00rel0) connected, both connected to a funnel (DK-TM908-r0p1-00rel0) which in turn connects to a replicator (DM-TM909-r0p1-00rel0). The replicator has two outputs, port 0 to a TPIU interface and port 1 to an ETB (DK-TM907-r0p3-00rel0). The CoreSight blocks are all clocked by the APEATCLK from the PRCMU and their AHB interconnect is clocked from a separate clock called APETRACECLK. The SoC also has a CTI/CTM block which can be added later as we have upstream support in the CoreSight subsystem. Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 12 May, 2015 9 commits
-
-
Michael Niewöhner authored
The act8846 is the main pmic and system-power-controller on radxarock boards, so add the necessary property. Signed-off-by: Michael Niewoehner <mniewoeh@stud.hs-offenburg.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
-
Arnd Bergmann authored
Merge tag 'sunxi-dt-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Pull "Allwinner DT additions for 4.1, take 1" from Maxime Ripard: All the device tree related changes for the 4.1 merge window. It has a rather big diffstat, because of a lot of mechanical and harmless changes, as described below. There is mostly: - The end of the DT relicensing. All our DT should now be under the dual X11/GPL license. - Convertion of all the DT to a label based syntax, instead of duplicating the tree like was done before. - Rework of the A10s and A13 DTSI to share the common devices - A few drivers enablings: A80 USB, the A31 PMIC, A31 and A23 arch timers, etc - Fix the checkpatch warnings - A few new boards : cubieboard4, mele i7, utoo p66, auxtex t004, pcduino3 nano, gemei G9, mk808c, jesurun q5, orange pi, orange pi mini * tag 'sunxi-dt-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (84 commits) ARM: sunxi: dt: Split the SPI pinctrl groups ARM: sunxi: dt: Fix whitespace errors ARM: sunxi: DT: Fix lines over 80 characters ARM: sunxi: dt: Remove the FSF address ARM: sunxi: dts: split IR pins for A10 and A20 ARM: sun7i: dt: Add new MK808C device ARM: dts: sun6i: Set PLL6 as parent to AHB1 clock in AHB1 clock node ARM: dts: sunxi: Update ahb clocks for sun5i and sun7i ARM: dts: sun7i: Add dts file for the Jesurun Q5 top set box ARM: dts: sun5i: Enable touchscreen on Utoo P66 ARM: dts: sun7i: Add dts file for the Orangepi mini SBC ARM: dts: sun7i: Add dts file for the Orangepi SBC ARM: dts: sun7i: Add A20 SRAM and SRAM controller ARM: dts: sun5i: Add A13 and A10s SRAM and SRAM controller ARM: dts: sun4i: Add A10 SRAM and SRAM controller ARM: dts: sun5i: Add broken-hpi property for Utoo-P66 eMMC ARM: sun8i: dt: Enable A23 SMP support ARM: dts: sun6i: Add cpu thermal zones to dtsi ARM: dts: sun6i: Add cpu clock reference and operating points to dtsi ARM: sunxi: DT: Add stdout-path property ...
-
Arnd Bergmann authored
Merge tag 'socfpga_dts_for_v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt Pull "SoCFPGA DTS updates for v4.2" from Dinh Nguyen: - Add accelerometer to sockit - Update and clean up support for the Arria10 platform - Add sdmmc_clk/4 clock node SoCFPGA Cyclone5/Arria5 - Update ethernet nodes with multicast/unicast/fifo-depth properties - Add clocks for Arria10 platform * tag 'socfpga_dts_for_v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: dts: add clocks to the Arria10 platform ARM: socfpga: dts: Add tx-fifo-depth and rx-fifo-depth properties ARM: socfpga: dts: Add multicast bins and unicast filter entries ARM: socfpga: dts: Add a clock node for sdmmc CIU ARM: socfpga: dts: rename socdk board file to socdk_sdmmc ARM: socfpga: dts: enable UART1 for the debug uart ARM: socfpga: dts: disable the sdmmc, and uart nodes in the base arria10 ARM: socfpga: dts: add cpu1-start-addr for Arria 10 ARM: socfpga: dts: Add adxl34x
-
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91Arnd Bergmann authored
Pull "First batch of DT changes for 4.2" from Nicolas Ferre: - cleanup and addition of Overkiz boards - at91sam9x5: pwm0 pinctrl definition - delete deprecated mainck nodes * tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/dt: drop deprecated mainck node from pmc ARM: at91/dt: add support for kizbox2 ARM: at91/dt: add support for kizboxmini ARM: at91/dt: sam9x5: add pinctrl for pwm0 ARM: at91/dt: at91-kizbox: update chosen node ARM: at91/dt: at91-kizbox: re-size nand partitions ARM: at91/dt: at91-kizbox: leds related changes ARM: at91/dt: at91-kizbox: gpio-keys related changes ARM: at91/dt: at91-kizbox: user proper serial uart ARM: at91/dt: at91-kizbox: sanitize file ARM: at91/dt: kizbox: rename to at91-kizbox
-
git://github.com/hisilicon/linux-hisiArnd Bergmann authored
Merge "ARM: DT: Hisilicon hip04 soc and D01 board updates for 4.2" from Wei Xu: - Add hip04 GPIO nodes - Add NANDC nodes for hip04 and D01 board - Add hip04 ethernet related nodes * tag 'hip04-dt-for-4.2' of git://github.com/hisilicon/linux-hisi: ARM: dts: add HiSilicon hip04 ethernet controller resource mtd: hisilicon: add device tree node for NAND controller ARM: dts: hip04: add GPIO pieces
-
Masahiro Yamada authored
Initial device trees for UniPhier SoCs: PH1-sLD3, PH1-LD4, PH1-Pro4, and PH1-sLD8. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'sti-dt-for-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti into next/dt Pull "STi DT updates for v4.2, round 1." from Maxime Coquelin: Highlights: ----------- - Add DT nodes for SSC on STiH407 family - Add DT nodes for SD/MMC on STiH407 & STiH418 - Add DT node for LPC on STiH407 - Add Sata DT nodes for STiH407 - Fix PIO3 & PIO35 pins retiming on STiH407 * tag 'sti-dt-for-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti: ARM: DT: STi: STiH407: Add sata DT nodes. ARM: STi: DT: STiH407: Fix retime pin mask for PIO5 and PIO35 ARM: STi: DT: STiH407: Add Device Tree node for the LPC mfd: dt-bindings: Provide human readable defines for LPC mode choosing ARM: STi: DT: STiH418: Add dt nodes for sdhci and emmc. ARM: STi: DT: STiH407: Add dt nodes for sdhci and emmc. ARM: sti: Provide DT nodes for SBC SSC[0..2] ARM: sti: Provide DT nodes for SSC[0..4]
-
Baruch Siach authored
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Baruch Siach authored
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
- 11 May, 2015 13 commits
-
-
Dinh Nguyen authored
Add all the clock nodes for the Arria10 platform. At the same time, update the peripherals with their respective clocks property. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> --- v2: Add the l4_sys_free_clk node
-
Vince Bridgers authored
Add tx-fifo-depth and rx-fifo-depth devicetree properties for socfpga stmmac. These devicetree properties will be used to configure certain features of the stmmac on the socfpga. Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
-
Vince Bridgers authored
Add multicast-filter-bins and perfect-filter-entries configuration properties to the socfpga devicetree for the Arria 10 socfpga. Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
-
Dinh Nguyen authored
The CIU(Card Interface Unit) get its clock from the sdmmc_clk_divided clock which is used to clock the card. The sdmmc_clk_divided clock is the sdmmc_clk passed through a fixed divider of 4. This patch adds the sdmmc_clk_divided node and makes the sdmmc_clk it's parent. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> --- v2: renamed ciu_clk to sdmmc_clk_divided
-
Dinh Nguyen authored
Rename the socfpga_arria10_socdk board file to socfpga_arria10_socdk_sdmmc as Arria 10 devkit cannot support SDMMC and QSPI at the same time. Thus we will need to have 2 separate board files, one for SDMMC and one for QSPI. We also add a new base board dtsi file, socfpga_arria10_socdk.dtsi so that we use common peripherals for each flavor of the devkits. Add the sdmmc node to the socfpga_arria10_socdk_sdmmc.dts board file. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
-
Dinh Nguyen authored
Arria10 devkit is using UART1 for the debug uart port. Remove unused aliases. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> --- v2: Add removal of unused aliases
-
Dinh Nguyen authored
Add status = "disabled" in the base DTSI for Arria10. The SDMMC and uart nodes should be enabled in the appropriate board file. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
-
Dinh Nguyen authored
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
-
Walter Lozano authored
This patch adds the DTS bindings for the adxl34x digital accelerometer. Signed-off-by: Walter Lozano <walter@vanguardiasur.com.ar> Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
-
Gaël PORTAY authored
The clock-frequency property became obsolete since the rework of the main clock driver in 3.16 (see commit 27cb1c20). It now get and uses the clock-frequency from the main_xtal node. Signed-off-by: Gaël PORTAY <g.portay@overkiz.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Gaël PORTAY authored
Add DT file for Kizbox 2 board. This board is based on Atmel's SAMA5D31 Cortex-A5 SoC. Signed-off-by: Gaël PORTAY <g.portay@overkiz.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Gaël PORTAY authored
Add DT file for Kizbox mini board. This board is based on Atmel's AT91SAM9G25 SoC. Signed-off-by: Gaël PORTAY <g.portay@overkiz.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Gaël PORTAY authored
Defines the pinctrl configurations for PWM0. Signed-off-by: Gaël PORTAY <g.portay@overkiz.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
- 10 May, 2015 9 commits
-
-
Linus Torvalds authored
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "I really need to get back to sending these on my Friday, instead of my Monday morning, but nothing too amazing in here: a few amdkfd fixes, a few radeon fixes, i915 fixes, one tegra fix and one core fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Zero out invalid vblank timestamp in drm_update_vblank_count. drm/tegra: Don't use vblank_disable_immediate on incapable driver. drm/radeon: stop trying to suspend UVD sessions drm/radeon: more strictly validate the UVD codec drm/radeon: make UVD handle checking more strict drm/radeon: make VCE handle check more strict drm/radeon: fix userptr lockup drm/radeon: fix userptr BO unpin bug v3 drm/amdkfd: Initialize sdma vm when creating sdma queue drm/amdkfd: Don't report local memory size drm/amdkfd: allow unregister process with queues drm/i915: Drop PIPE-A quirk for 945GSE HP Mini drm/i915: Sink rate read should be saved in deca-kHz drm/i915/dp: there is no audio on port A drm/i915: Add missing MacBook Pro models with dual channel LVDS drm/i915: Assume dual channel LVDS if pixel clock necessitates it drm/radeon: don't setup audio on asics that don't support it drm/radeon: disable semaphores for UVD V1 (v2)
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
misc i915 fixes. * tag 'drm-intel-fixes-2015-05-08' of git://anongit.freedesktop.org/drm-intel: drm/i915: Drop PIPE-A quirk for 945GSE HP Mini drm/i915: Sink rate read should be saved in deca-kHz drm/i915/dp: there is no audio on port A drm/i915: Add missing MacBook Pro models with dual channel LVDS drm/i915: Assume dual channel LVDS if pixel clock necessitates it
-
Mario Kleiner authored
Since commit 844b03f2 we make sure that after vblank irq off, we return the last valid (vblank count, vblank timestamp) pair to clients, e.g., during modesets, which is good. An overlooked side effect of that commit for kms drivers without support for precise vblank timestamping is that at vblank irq enable, when we update the vblank counter from the hw counter, we can't update the corresponding vblank timestamp, so now we have a totally mismatched timestamp for the new count to confuse clients. Restore old client visible behaviour from before Linux 3.17, but zero out the timestamp at vblank counter update (instead of disable as in original implementation) if we can't generate a meaningful timestamp immediately for the new vblank counter. This will fix this regression, so callers know they need to retry again later if they need a valid timestamp, but at the same time preserves the improvements made in the commit mentioned above. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: <stable@vger.kernel.org> #v3.17+ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "A set of ARM fixes: - fix an off-by-one error in the iommu DMA ops, which caused errors with a 4GiB size. - remove comments mentioning the non-existent CONFIG_CPU_ARM1020_CPU_IDLE macro. - remove useless CONFIG_CPU_ICACHE_STREAMING_DISABLE blocks, where this symbol never appeared in any Kconfig. - fix Feroceon code to cope with a previous change correctly (it incorrectly left an additional word in an assembly structure definition) - avoid a misleading IRQ affinity warning in the ARM PMU code for IRQs which are already affine to their CPUs. - fix the node name printed in the IRQ affinity warning" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8352/1: perf: Fix the pmu node name in warning message ARM: 8351/1: perf: don't warn about missing interrupt-affinity property for PPIs ARM: 8350/1: proc-feroceon: Fix feroceon_proc_info macro ARM: 8349/1: arch/arm/mm/proc-arm925.S: remove dead #ifdef block ARM: 8348/1: remove comments on CPU_ARM1020_CPU_IDLE ARM: 8347/1: dma-mapping: fix off-by-one check in arm_setup_iommu_dma_ops
-
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsungLinus Torvalds authored
Pull samsung fixes from Kukjin Kim: "Here is Samsung fixes for v4.1. Since I've missed to send this via arm-soc tree before v4.1-rc3, so I'm sending this to you directly - fix commit ea08de16 ("ARM: dts: Add DISP1 power domain for exynos5420") which causes 'unhandled fault: imprecise external abort' error when PD turned off. ("make DP a consumer of DISP1 power domain") - fix 's3c-rtc' probe failure on Odriod-X2/U2/U3 boards ("add 'rtc_src' clock to rtc node for source clock of rtc") - fix typo for 'cpu-crit-0' trip point on exynos5420/5440 - fix S2R failure on exynos5250-snow due to card power of Marvell WiFi driver (suspend/resume) ("add keep-power-in-susped to WiFi SDIO node")" * tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for exynos5250-snow ARM: dts: Fix typo in trip point temperature for exynos5420/5440 ARM: dts: add 'rtc_src' clock to rtc node for exynos4412-odroid boards ARM: dts: Make DP a consumer of DISP1 power domain on Exynos5420
-
Maxime Ripard authored
The pinctrl groups for SPI until now were also adding the chip selects in the SPI pinctrl group. This was causing a few issues, since a board was forced to use a random number of chipselects, even though it might use one of these chip selects for another pin. The number of chipselects defined was also not the same from one group to another because of different needs at the time these groups have been introduced, resulting in no clear view from the board DTS on what exactly is being muxed, which even might change in the future. Solve this by creating different pinctrl groups for the chipselects and the standard SPI pins (CLK, MOSI and MISO) so that we fix both issues. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Maxime Ripard authored
A few lines (probably copy pasted) have an indentation mixing tabs and spaces that triggers a checkpatch warning. Fix those, and while we're at it, fix the space-indented sections. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Maxime Ripard authored
A few lines in our DTSIs are over the 80 characters limit, making checkpatch complain about that. If possible (and relevant), wrap these lines to 80 characters. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-