Create a per-local receive queue to which, in a future patch, all incoming
packets will be directed and an I/O thread that will process those packets
and perform all transmission of packets.

Destruction of the local endpoint is also moved from the local processor
work item (which will be absorbed) to the thread.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Split the code that handles packet reception in softirq mode as a prelude
to moving all the packet processing beyond routing to the appropriate call
and setting up of a new call out into process context.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Currently, rxrpc gives the connection's work item a ref on the connection
when it queues it - and this is called from the timer expiration function.
The problem comes when queue_work() fails (ie. the work item is already
queued): the timer routine must put the ref - but this may cause the
cleanup code to run.

This has the unfortunate effect that the cleanup code may then be run in
softirq context - which means that any spinlocks it might need to touch
have to be guarded to disable softirqs (ie. they need a "_bh" suffix).

 (1) Don't give a ref to the work item.

 (2) Simplify handling of service connections by adding a separate active
     count so that the refcount isn't also used for this.

 (3) Connection destruction for both client and service connections can
     then be cleaned up by putting rxrpc_put_connection() out of line and
     making a tidy progression through the destruction code (offloaded to a
     workqueue if put from softirq or processor function context).  The RCU
     part of the cleanup then only deals with the freeing at the end.

 (4) Make rxrpc_queue_conn() return immediately if it sees the active count
     is -1 rather then queuing the connection.

 (5) Make sure that the cleanup routine waits for the work item to
     complete.

 (6) Stash the rxrpc_net pointer in the conn struct so that the rcu free
     routine can use it, even if the local endpoint has been freed.

Unfortunately, neither the timer nor the work item can simply get around
the problem by just using refcount_inc_not_zero() as the waits would still
have to be done, and there would still be the possibility of having to put
the ref in the expiration function.

Note the connection work item is mostly going to go away with the main
event work being transferred to the I/O thread, so the wait in (6) will
become obsolete.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Currently, rxrpc gives the call timer a ref on the call when it starts it
and this is passed along to the workqueue by the timer expiration function.
The problem comes when queue_work() fails (ie. the work item is already
queued): the timer routine must put the ref - but this may cause the
cleanup code to run.

This has the unfortunate effect that the cleanup code may then be run in
softirq context - which means that any spinlocks it might need to touch
have to be guarded to disable softirqs (ie. they need a "_bh" suffix).

Fix this by:

 (1) Don't give a ref to the timer.

 (2) Making the expiration function not do anything if the refcount is 0.
     Note that this is more of an optimisation.

 (3) Make sure that the cleanup routine waits for timer to complete.

However, this has a consequence that timer cannot give a ref to the work
item.  Therefore the following fixes are also necessary:

 (4) Don't give a ref to the work item.

 (5) Make the work item return asap if it sees the ref count is 0.

 (6) Make sure that the cleanup routine waits for the work item to
     complete.

Unfortunately, neither the timer nor the work item can simply get around
the problem by just using refcount_inc_not_zero() as the waits would still
have to be done, and there would still be the possibility of having to put
the ref in the expiration function.

Note the call work item is going to go away with the work being transferred
to the I/O thread, so the wait in (6) will become obsolete.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

In rxrpc tracing, use enums to generate lists of points of interest rather
than __builtin_return_address() for the sk_buff tracepoint.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Add a tracepoint for the rxrpc_bundle refcounting.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

In rxrpc tracing, use enums to generate lists of points of interest rather
than __builtin_return_address() for the rxrpc_call tracepoint
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

In rxrpc tracing, use enums to generate lists of points of interest rather
than __builtin_return_address() for the rxrpc_conn tracepoint
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

In rxrpc tracing, use enums to generate lists of points of interest rather
than __builtin_return_address() for the rxrpc_peer tracepoint
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

In rxrpc tracing, use enums to generate lists of points of interest rather
than __builtin_return_address() for the rxrpc_local tracepoint
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Extract the code from a received rx ABORT packet much earlier and in a
single place and harmonise the responses to malformed ABORT packets.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Remove the rxrpc_conn_parameters struct from the rxrpc_connection and
rxrpc_bundle structs and emplace the members directly.  These are going to
get filled in from the rxrpc_call struct in future.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Remove the _net() and knet() debugging macros in favour of tracepoints.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Remove the kproto() and _proto() debugging macros in preference to using
tracepoints for this.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

We should not now see duplicate packets in the recvmsg_queue.  At one
point, jumbo packets that overlapped with already queued data would be
added to the queue and dealt with in recvmsg rather than in the softirq
input code, but now jumbo packets are split/cloned before being processed
by the input code and the subpackets can be discarded individually.

So remove the recvmsg-side code for handling this.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

rxrpc_kernel_call_is_complete() has been removed, so remove its declaration
too.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

When retransmitting a packet, rxrpc_resend() shouldn't be attaching a ref
to the call to the txbuf as that pins the call and prevents the call from
clearing the packet buffer.
Signed-off-by: David Howells <dhowells@redhat.com>
Fixes: d57a3a15 ("rxrpc: Save last ACK's SACK table rather than marking txbufs")
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Implement an in-kernel rxperf server to allow kernel-based rxrpc services
to be tested directly, unlike with AFS where they're accessed by the
fileserver when the latter decides it wants to.

This is implemented as a module that, if loaded, opens UDP port 7009
(afs3-rmtsys) and listens on it for incoming calls.  Calls can be generated
using the rxperf command shipped with OpenAFS, for example.

Changes
=======
ver #2)
 - Use min_t() instead of min().
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: Jakub Kicinski <kuba@kernel.org>

Fix the following checker warning:

../net/rxrpc/key.c:692:9: error: subtraction of different types can't work (different address spaces)

Checker is wrong in this case, but cast the pointers to unsigned long to
avoid the warning.

Whilst we're at it, reduce the assertions to WARN_ON() and return an error.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Test NIC hardware checksum offload:

- Rx + Tx
- IPv4 + IPv6
- TCP + UDP

Optional features:

- zero checksum 0xFFFF
- checksum disable 0x0000
- transport encap headers
- randomization

See file header for detailed comments.

Expected results differ depending on NIC features:

- CHECKSUM_UNNECESSARY vs CHECKSUM_COMPLETE
- NETIF_F_HW_CSUM (csum_start/csum_off) vs NETIF_F_IP(V6)_CSUM
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20221128140210.553391-1-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Steffen Klassert says:

====================
ipsec-next 2022-11-26

1) Remove redundant variable in esp6.
   From Colin Ian King.

2) Update x->lastused for every packet. It was used only for
   outgoing mobile IPv6 packets, but showed to be usefull
   to check if the a SA is still in use in general.
   From Antony Antony.

3) Remove unused variable in xfrm_byidx_resize.
   From Leon Romanovsky.

4) Finalize extack support for xfrm.
   From Sabrina Dubroca.

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
  xfrm: add extack to xfrm_set_spdinfo
  xfrm: add extack to xfrm_alloc_userspi
  xfrm: add extack to xfrm_do_migrate
  xfrm: add extack to xfrm_new_ae and xfrm_replay_verify_len
  xfrm: add extack to xfrm_del_sa
  xfrm: add extack to xfrm_add_sa_expire
  xfrm: a few coding style clean ups
  xfrm: Remove not-used total variable
  xfrm: update x->lastused for every packet
  esp6: remove redundant variable err
====================

Link: https://lore.kernel.org/r/20221126110303.1859238-1-steffen.klassert@secunet.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Maxime Chevallier says:

====================
net: pcs: altera-tse: simplify and clean-up the driver

This small series does a bit of code cleanup in the altera TSE pcs
driver, removing unused register definitions, handling 1000BaseX speed
configuration correctly according to the datasheet, and making use of
proper poll_timeout helpers.

No functional change is introduced.
====================

Link: https://lore.kernel.org/r/20221125131801.64234-1-maxime.chevallier@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

remove unused register definitions, left from the split with the
altera-tse mac driver.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When disabling the SGMII mode bit, the PCS defaults to 1000BaseX mode.
In that mode, we don't need to set the speed since it's always 1000Mbps.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Software resets on the TSE PCS don't clear registers, but rather reset
all internal state machines regarding AN, comma detection and
encoding/decoding. Use read_poll_timeout to wait for the reset to clear
instead of manually polling the register.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Matthieu Baerts says:

====================
mptcp: MSG_FASTOPEN and TFO listener side support

Before this series, only the initiator of a connection was able to combine
both TCP FastOpen and MPTCP when using TCP_FASTOPEN_CONNECT socket option.

These new patches here add (in theory) the full support of TFO with MPTCP,
which means:

 - MSG_FASTOPEN sendmsg flag support (patch 1/8)
 - TFO support for the listener side (patches 2-5/8)
 - TCP_FASTOPEN socket option (patch 6/8)
 - TCP_FASTOPEN_KEY socket option (patch 7/8)

To support TFO for the server side, a few preparation patches are needed
(patches 2 to 5/8). Some of them were inspired by a previous work from
Benjamin Hesmans.

Note that TFO support with MPTCP has been validated with selftests
(patch 8/8) but also with Packetdrill tests running with a modified
but still very WIP version supporting MPTCP. Both the modified tool
and the tests are available online:

  https://github.com/multipath-tcp/packetdrill/
====================

Link: https://lore.kernel.org/r/20221125222958.958636-1-matthieu.baerts@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch first adds TFO support in mptcp_connect.c.

This can be enabled via a new option: -o MPTFO.

Once enabled, the TCP_FASTOPEN socket option is enabled for the server
side and a sendto() with MSG_FASTOPEN is used instead of a connect() for
the client side.

Note that the first SYN has a limit of bytes it can carry. In other
words, it is allowed to send less data than the provided one. We then
need to track more status info to properly allow the next sendmsg()
starting from the next part of the data to send the rest.

Also in TFO scenarios, we need to completely spool the partially xmitted
buffer -- and account for that -- before starting sendfile/mmap xmit,
otherwise the relevant tests will fail.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The goal of this socket option is to set different keys per listener,
see commit 1fba70e5 ("tcp: socket option to set TCP fast open key")
for more details about this socket option.

The only thing to do here with MPTCP is to relay the request to the
first subflow like it is already done for the other TCP_FASTOPEN* socket
options.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The TCP_FASTOPEN socket option is one way for the application to tell
the kernel TFO support has to be enabled for the listener socket.

The only thing to do here with MPTCP is to relay the request to the
first subflow like it is already done for the other TCP_FASTOPEN* socket
options.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The send_synack() needs to be overridden for MPTCP to support TFO for
two reasons:

- There is not be enough space in the TCP options if the TFO cookie has
  to be added in the SYN+ACK with other options: MSS (4), SACK OK (2),
  Timestamps (10), Window Scale (3+1), TFO (10+2), MP_CAPABLE (12).
  MPTCPv1 specs -- RFC 8684, section B.1 [1] -- suggest to drop the TCP
  timestamps option in this case.

- The data received in the SYN has to be handled: the SKB can be
  dequeued from the subflow sk and transferred to the MPTCP sk. Counters
  need to be updated accordingly and the application can be notified at
  the end because some bytes have been received.

[1] https://www.rfc-editor.org/rfc/rfc8684.html#section-b.1Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

With fastopen in place, the first subflow socket is created before the
MPC handshake completes, and we need to properly initialize the sequence
numbers at MPC ACK reception.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently the initial ack sequence is generated on demand whenever
it's requested and the remote key is handy. The relevant code is
scattered in different places and can lead to multiple, unneeded,
crypto operations.

This change consolidates the ack sequence generation code in a single
helper, storing the sequence number at the subflow level.

The above additionally saves a few conditional in fast-path and will
simplify the upcoming fast-open implementation.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently in the receive path we don't need to discriminate
between MPC SYN, MPC SYN-ACK and MPC ACK, but soon the fastopen
code will need that info to properly track the fully established
status.

Track the exact MPC suboption type into the receive opt bitmap.
No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit 54f1944e ("mptcp: factor out mptcp_connect()"), all the
infrastructure is now in place to support the MSG_FASTOPEN flag, we
just need to call into the fastopen path in mptcp_sendmsg().
Co-developed-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tools/lib/bpf/ringbuf.c
  927cbb47 ("libbpf: Handle size overflow for ringbuf mmap")
  b486d19a ("libbpf: checkpatch: Fixed code alignments in ringbuf.c")
https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, can and wifi.

  Current release - new code bugs:

   - eth: mlx5e:
      - use kvfree() in mlx5e_accel_fs_tcp_create()
      - MACsec, fix RX data path 16 RX security channel limit
      - MACsec, fix memory leak when MACsec device is deleted
      - MACsec, fix update Rx secure channel active field
      - MACsec, fix add Rx security association (SA) rule memory leak

  Previous releases - regressions:

   - wifi: cfg80211: don't allow multi-BSSID in S1G

   - stmmac: set MAC's flow control register to reflect current settings

   - eth: mlx5:
      - E-switch, fix duplicate lag creation
      - fix use-after-free when reverting termination table

  Previous releases - always broken:

   - ipv4: fix route deletion when nexthop info is not specified

   - bpf: fix a local storage BPF map bug where the value's spin lock
     field can get initialized incorrectly

   - tipc: re-fetch skb cb after tipc_msg_validate

   - wifi: wilc1000: fix Information Element parsing

   - packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE

   - sctp: fix memory leak in sctp_stream_outq_migrate()

   - can: can327: fix potential skb leak when netdev is down

   - can: add number of missing netdev freeing on error paths

   - aquantia: do not purge addresses when setting the number of rings

   - wwan: iosm:
      - fix incorrect skb length leading to truncated packet
      - fix crash in peek throughput test due to skb UAF"

* tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
  net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed
  MAINTAINERS: Update maintainer list for chelsio drivers
  ionic: update MAINTAINERS entry
  sctp: fix memory leak in sctp_stream_outq_migrate()
  packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
  net/mlx5: Lag, Fix for loop when checking lag
  Revert "net/mlx5e: MACsec, remove replay window size limitation in offload path"
  net: marvell: prestera: Fix a NULL vs IS_ERR() check in some functions
  net: tun: Fix use-after-free in tun_detach()
  net: mdiobus: fix unbalanced node reference count
  net: hsr: Fix potential use-after-free
  tipc: re-fetch skb cb after tipc_msg_validate
  mptcp: fix sleep in atomic at close time
  mptcp: don't orphan ssk in mptcp_close()
  dsa: lan9303: Correct stat name
  ipv4: Fix route deletion when nexthop info is not specified
  net: wwan: iosm: fix incorrect skb length
  net: wwan: iosm: fix crash in peek throughput test
  net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type
  net: wwan: iosm: fix kernel test robot reported error
  ...

As the nla_nest_start() may fail with NULL returned, the return value
should be checked.

Note that this is not a real bug, nothing will break here.
The next nla_put() will fail as well and we'll bail (and
nla_nest_cancel() can handle NULL). But we keep getting
those "fixes" so whatever.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20221129013934.55184-1-yuancan@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After system resumed on some environment board, the promiscuous mode
is disabled because the SoC turned off. So, call ravb_set_rx_mode() in
the ravb_resume() to fix the issue.
Reported-by: Tho Vu <tho.vu.wh@renesas.com>
Fixes: 0184165b ("ravb: add sleep PM suspend/resume support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20221128065604.1864391-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This updates the maintainers for chelsio inline crypto drivers and
chelsio crypto drivers.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Link: https://lore.kernel.org/r/20221128231348.8225-1-ayush.sawal@chelsio.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Now that Pensando is a part of AMD we need to update
a couple of addresses.  We're keeping the mailing list
address for the moment, but that will likely change in
the near future.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://lore.kernel.org/r/20221129011734.20849-1-shannon.nelson@amd.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>