When building with clang we encounter this warning:
| net/l2tp/l2tp_ppp.c:1557:6: error: format specifies type 'unsigned
| short' but the argument has type 'u32' (aka 'unsigned int')
| [-Werror,-Wformat] session->nr, session->ns,

Both session->nr and session->ns are of type u32. The format specifier
previously used is `%hu` which would truncate our unsigned integer from
32 to 16 bits. This doesn't seem like intended behavior, if it is then
perhaps we need to consider suppressing the warning with pragma clauses.

This patch should get us closer to the goal of enabling the -Wformat
flag for Clang builds.

Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by: Justin Stitt <justinstitt@google.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/20220706230833.535238-1-justinstitt@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently NIC packet receiving performance based on page pool deteriorates
occasionally. To analysis the causes of this problem page allocation stats
are collected. Here are the stats when NIC rx performance deteriorates:

bandwidth(Gbits/s)		16.8		6.91
rx_pp_alloc_fast		13794308	21141869
rx_pp_alloc_slow		108625		166481
rx_pp_alloc_slow_h		0		0
rx_pp_alloc_empty		8192		8192
rx_pp_alloc_refill		0		0
rx_pp_alloc_waive		100433		158289
rx_pp_recycle_cached		0		0
rx_pp_recycle_cache_full	0		0
rx_pp_recycle_ring		362400		420281
rx_pp_recycle_ring_full		6064893		9709724
rx_pp_recycle_released_ref	0		0

The rx_pp_alloc_waive count indicates that a large number of pages' numa
node are inconsistent with the NIC device numa node. Therefore these pages
can't be reused by the page pool. As a result, many new pages would be
allocated by __page_pool_alloc_pages_slow which is time consuming. This
causes the NIC rx performance fluctuations.

The main reason of huge numa mismatch pages in page pool is that page pool
uses alloc_pages_bulk_array to allocate original pages. This function is
not suitable for page allocation in NUMA scenario. So this patch uses
alloc_pages_bulk_array_node which has a NUMA id input parameter to ensure
the NUMA consistent between NIC device and allocated pages.

Repeated NIC rx performance tests are performed 40 times. NIC rx bandwidth
is higher and more stable compared to the datas above. Here are three test
stats, the rx_pp_alloc_waive count is zero and rx_pp_alloc_slow which
indicates pages allocated from slow patch is relatively low.

bandwidth(Gbits/s)		93		93.9		93.8
rx_pp_alloc_fast		60066264	61266386	60938254
rx_pp_alloc_slow		16512		16517		16539
rx_pp_alloc_slow_ho		0		0		0
rx_pp_alloc_empty		16512		16517		16539
rx_pp_alloc_refill		473841		481910		481585
rx_pp_alloc_waive		0		0		0
rx_pp_recycle_cached		0		0		0
rx_pp_recycle_cache_full	0		0		0
rx_pp_recycle_ring		29754145	30358243	30194023
rx_pp_recycle_ring_full		0		0		0
rx_pp_recycle_released_ref	0		0		0
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20220705113515.54342-1-huangguangbin2@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf, netfilter, can, and bluetooth.

  Current release - regressions:

   - bluetooth: fix deadlock on hci_power_on_sync

  Previous releases - regressions:

   - sched: act_police: allow 'continue' action offload

   - eth: usbnet: fix memory leak in error case

   - eth: ibmvnic: properly dispose of all skbs during a failover

  Previous releases - always broken:

   - bpf:
       - fix insufficient bounds propagation from
         adjust_scalar_min_max_vals
       - clear page contiguity bit when unmapping pool

   - netfilter: nft_set_pipapo: release elements in clone from
     abort path

   - mptcp: netlink: issue MP_PRIO signals from userspace PMs

   - can:
       - rcar_canfd: fix data transmission failed on R-Car V3U
       - gs_usb: gs_usb_open/close(): fix memory leak

  Misc:

   - add Wenjia as SMC maintainer"

* tag 'net-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
  wireguard: Kconfig: select CRYPTO_CHACHA_S390
  crypto: s390 - do not depend on CRYPTO_HW for SIMD implementations
  wireguard: selftests: use microvm on x86
  wireguard: selftests: always call kernel makefile
  wireguard: selftests: use virt machine on m68k
  wireguard: selftests: set fake real time in init
  r8169: fix accessing unset transport header
  net: rose: fix UAF bug caused by rose_t0timer_expiry
  usbnet: fix memory leak in error case
  Revert "tls: rx: move counting TlsDecryptErrors for sync"
  mptcp: update MIB_RMSUBFLOW in cmd_sf_destroy
  mptcp: fix local endpoint accounting
  selftests: mptcp: userspace PM support for MP_PRIO signals
  mptcp: netlink: issue MP_PRIO signals from userspace PMs
  mptcp: Acquire the subflow socket lock before modifying MP_PRIO flags
  mptcp: Avoid acquiring PM lock for subflow priority changes
  mptcp: fix locking in mptcp_nl_cmd_sf_destroy()
  net/mlx5e: Fix matchall police parameters validation
  net/sched: act_police: allow 'continue' action offload
  net: lan966x: hardcode the number of external ports
  ...

Pull pin control fixes from Linus Walleij:

 - Tag Intel pin control as supported in MAINTAINERS

 - Fix a NULL pointer exception in the Aspeed driver

 - Correct some NAND functions in the Sunxi A83T driver

 - Use the right offset for some Sunxi pins

 - Fix a zero base offset in the Freescale (NXP) i.MX93

 - Fix the IRQ support in the STM32 driver

* tag 'pinctrl-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: stm32: fix optional IRQ support to gpios
  pinctrl: imx: Add the zero base flag for imx93
  pinctrl: sunxi: sunxi_pconf_set: use correct offset
  pinctrl: sunxi: a83t: Fix NAND function name for some pins
  pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux()
  MAINTAINERS: Update Intel pin control to Supported

These are indeed "should not happen" situations, but it turns out recent
changes made the 'task_is_stopped_or_trace()' case trigger (fix for that
exists, is pending more testing), and the BUG_ON() makes it
unnecessarily hard to actually debug for no good reason.

It's been that way for a long time, but let's make it clear: BUG_ON() is
not good for debugging, and should never be used in situations where you
could just say "this shouldn't happen, but we can continue".

Use WARN_ON_ONCE() instead to make sure it gets logged, and then just
continue running.  Instead of making the system basically unusuable
because you crashed the machine while potentially holding some very core
locks (eg this function is commonly called while holding 'tasklist_lock'
for writing).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 6dd4142f ("Merge branch 'af_unix-per-netns-socket-hash'") and
commit 51bae889 ("af_unix: Put pathname sockets in the global hash
table.") changed a hash table layout.

  Before:
    unix_socket_table [0   - 255] : abstract & pathname sockets
                      [256 - 511] : unnamed sockets

  After:
    per-netns table   [0   - 255] : abstract & pathname sockets
                      [256 - 511] : unnamed sockets
    bsd_socket_table  [0   - 255] : pathname sockets (sk_bind_node)

Now, while looking up sockets, we traverse the global table for the
pathname sockets and the first half of each per-netns hash table for
abstract sockets, where pathname sockets are also linked.  Thus, the
more pathname sockets we have, the longer we take to look up abstract
sockets.  This characteristic has been there before the layout change,
but we can improve it now.

This patch changes the per-netns hash table's layout so that sockets not
requiring lookup reside in the first half and do not impact the lookup of
abstract sockets.

    per-netns table   [0   - 255] : pathname & unnamed sockets
                      [256 - 511] : abstract sockets
    bsd_socket_table  [0   - 255] : pathname sockets (sk_bind_node)

We have run a test that bind()s 100,000 abstract/pathname sockets for
each, bind()s an abstract socket 100,000 times and measures the time
on __unix_find_socket_byname().  The result shows that the patch makes
each lookup faster.

  Without this patch:
    $ sudo ./funclatency -p 2278 --microseconds __unix_find_socket_byname.isra.44
     usec                : count    distribution
         0 -> 1          : 0        |                                        |
         2 -> 3          : 0        |                                        |
         4 -> 7          : 0        |                                        |
         8 -> 15         : 126      |                                        |
        16 -> 31         : 1438     |*                                       |
        32 -> 63         : 4150     |***                                     |
        64 -> 127        : 9049     |*******                                 |
       128 -> 255        : 37704    |*******************************         |
       256 -> 511        : 47533    |****************************************|

  With this patch:
    $ sudo ./funclatency -p 3648 --microseconds __unix_find_socket_byname.isra.46
     usec                : count    distribution
         0 -> 1          : 109      |                                        |
         2 -> 3          : 318      |                                        |
         4 -> 7          : 725      |                                        |
         8 -> 15         : 2501     |*                                       |
        16 -> 31         : 3061     |**                                      |
        32 -> 63         : 4028     |***                                     |
        64 -> 127        : 9312     |*******                                 |
       128 -> 255        : 51372    |****************************************|
       256 -> 511        : 28574    |**********************                  |
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20220705233715.759-1-kuniyu@amazon.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Jason A. Donenfeld says:

====================
wireguard patches for 5.19-rc6

1) A few small fixups to the selftests, per usual. Of particular note is
   a fix for a test flake that occurred on especially fast systems that
   boot in less than a second.

2) An addition during this cycle of some s390 crypto interacted with the
   way wireguard selects dependencies, resulting in linker errors
   reported by the kernel test robot. So Vladis sent in a patch for
   that, which also required a small preparatory fix moving some Kconfig
   symbols around.
====================

Link: https://lore.kernel.org/r/20220707003157.526645-1-Jason@zx2c4.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Select the new implementation of CHACHA20 for S390 when available.
It is faster than the generic software implementation, but also prevents
some linker errors in certain situations.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-kernel/202207030630.6SZVkrWf-lkp@intel.com/Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Various accelerated software implementation Kconfig values for S390 were
mistakenly placed into drivers/crypto/Kconfig, even though they're
mainly just SIMD code and live in arch/s390/crypto/ like usual. This
gives them the very unusual dependency on CRYPTO_HW, which leads to
problems elsewhere.

This patch fixes the issue by moving the Kconfig values for non-hardware
drivers into the usual place in crypto/Kconfig.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This makes for faster tests, faster compile time, and allows us to ditch
ACPI finally.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

These selftests are used for much more extensive changes than just the
wireguard source files. So always call the kernel's build file, which
will do something or nothing after checking the whole tree, per usual.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This should be a bit more stable hopefully.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Not all platforms have an RTC, and rather than trying to force one into
each, it's much easier to just set a fixed time. This is necessary
because WireGuard's latest handshakes parameter is returned in wallclock
time, and if the system time isn't set, and the system is really fast,
then this returns 0, which trips the test.

Turning this on requires setting CONFIG_COMPAT_32BIT_TIME=y, as musl
doesn't support settimeofday without it.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use bitmap_empty() instead of hand-writing it.

It is less verbose and it improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/78713a72414b99f673c3a9ec0519bb41c080935a.1657053343.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.

It is less verbose and it improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d61ec77ce0b92f7539c6a144106139f8d737ec29.1657053343.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.

It is less verbose and it improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/521bd2a49be5d88e493bcfb63505d3df91a1c2d2.1657052743.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.

It is less verbose and it improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d508f3adf7e2804f4d3793271b82b196a2ccb940.1657052562.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.

It is less verbose and it improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/c62c1774e6a34bc64323ce526b385aa87c1ca575.1657049799.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.

It is less verbose and it improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/717ba530215f4d7ce9fedcc73d98dba1f70d7f71.1657049636.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

66e4c8d9 ("net: warn if transport header was not set") added
a check that triggers a warning in r8169, see [0].

The commit referenced in the Fixes tag refers to the change from
which the patch applies cleanly, there's nothing wrong with this
commit. It seems the actual issue (not bug, because the warning
is harmless here) was introduced with bdfa4ed6
("r8169: use Giant Send").

[0] https://bugzilla.kernel.org/show_bug.cgi?id=216157

Fixes: 8d520b4d ("r8169: work around RTL8125 UDP hw bug")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Tested-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/1b2c2b29-3dc0-f7b6-5694-97ec526d51a0@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove unnecessary spi_set_drvdata() in b53_spi_remove(), the
driver_data will be set to NULL in device_unbind_cleanup() after
calling ->remove().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220705131733.351962-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There are UAF bugs caused by rose_t0timer_expiry(). The
root cause is that del_timer() could not stop the timer
handler that is running and there is no synchronization.
One of the race conditions is shown below:

    (thread 1)             |        (thread 2)
                           | rose_device_event
                           |   rose_rt_device_down
                           |     rose_remove_neigh
rose_t0timer_expiry        |       rose_stop_t0timer(rose_neigh)
  ...                      |         del_timer(&neigh->t0timer)
                           |         kfree(rose_neigh) //[1]FREE
  neigh->dce_mode //[2]USE |

The rose_neigh is deallocated in position [1] and use in
position [2].

The crash trace triggered by POC is like below:

BUG: KASAN: use-after-free in expire_timers+0x144/0x320
Write of size 8 at addr ffff888009b19658 by task swapper/0/0
...
Call Trace:
 <IRQ>
 dump_stack_lvl+0xbf/0xee
 print_address_description+0x7b/0x440
 print_report+0x101/0x230
 ? expire_timers+0x144/0x320
 kasan_report+0xed/0x120
 ? expire_timers+0x144/0x320
 expire_timers+0x144/0x320
 __run_timers+0x3ff/0x4d0
 run_timer_softirq+0x41/0x80
 __do_softirq+0x233/0x544
 ...

This patch changes rose_stop_ftimer() and rose_stop_t0timer()
in rose_remove_neigh() to del_timer_sync() in order that the
timer handler could be finished before the resources such as
rose_neigh and so on are deallocated. As a result, the UAF
bugs could be mitigated.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220705125610.77971-1-duoming@zju.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

usbnet_write_cmd_async() mixed up which buffers
need to be freed in which error case.

v2: add Fixes tag
v3: fix uninitialized buf pointer

Fixes: 877bd862 ("usbnet: introduce usbnet 3 command helpers")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220705125351.17309-1-oneukum@suse.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit 2ef8e39f, reversing
changes made to e7ce9fc9.

There are build warnings here which break the normal
build due to -Werror. Ratheesh was nice enough to quickly
follow up with fixes but didn't hit all the warnings I
see on GCC 12 so to unlock net-next from taking patches
let get this series out for now.

Link: https://lore.kernel.org/r/20220707013201.1372433-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull OpenRISC fixes from Stafford Horne:
 "Fixups for OpenRISC found during recent testing:

   - An OpenRISC irqchip fix to stop acking level interrupts which was
     causing issues on SMP platforms

   - A comment typo fix in our unwinder code"

* tag 'for-linus' of https://github.com/openrisc/linux:
  openrisc: unwinder: Fix grammar issue in comment
  irqchip: or1k-pic: Undefine mask_ack for level triggered hardware

Pull sound fixes from Takashi Iwai:
 "This became largish as it includes the pending ASoC fixes.

  Almost all changes are device-specific small fixes, while many of them
  are coverage for mixer issues that were detected by selftest. In
  addition, usual suspects for HD/USB-audio are there"

* tag 'sound-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (43 commits)
  ALSA: cs46xx: Fix missing snd_card_free() call at probe error
  ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)
  ALSA: usb-audio: Add quirk for Fiero SC-01
  ALSA: hda/realtek: Add quirk for Clevo L140PU
  ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices
  ASoC: madera: Fix event generation for rate controls
  ASoC: madera: Fix event generation for OUT1 demux
  ASoC: cs47l15: Fix event generation for low power mux control
  ASoC: cs35l41: Add ASP TX3/4 source to register patch
  ASoC: dapm: Initialise kcontrol data for mux/demux controls
  ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO error
  ASoC: cs35l41: Correct some control names
  ASoC: wm5110: Fix DRE control
  ASoC: wm_adsp: Fix event for preloader
  MAINTAINERS: update ASoC Qualcomm maintainer email-id
  ASoC: rockchip: i2s: switch BCLK to GPIO
  ASoC: SOF: Intel: disable IMR boot when resuming from ACPI S4 and S5 states
  ASoC: SOF: pm: add definitions for S4 and S5 states
  ASoC: SOF: pm: add explicit behavior for ACPI S1 and S2
  ASoC: SOF: Intel: hda: Fix compressed stream position tracking
  ...

This reverts commit 284b4d93.
When using TLS device offload and coming from tls_device_reencrypt()
flow, -EBADMSG error in tls_do_decryption() should not be counted
towards the TLSTlsDecryptError counter.

Move the counter increase back to the decrypt_internal() call site in
decrypt_skb_update().
This also fixes an issue where:
	if (n_sgin < 1)
		return -EBADMSG;

Errors in decrypt_internal() were not counted after the cited patch.

Fixes: 284b4d93 ("tls: rx: move counting TlsDecryptErrors for sync")
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Qiao Ma says:

====================
net: hinic: fix bugs about dev_get_stats

These patches fixes 2 bugs of hinic driver:
- fix bug that ethtool get wrong stats because of hinic_{txq|rxq}_clean_stats() is called
- avoid kernel hung in hinic_get_stats64()

See every patch for more information.

Changes in v4:
- removed meaningless u64_stats_sync protection in hinic_{txq|rxq}_get_stats
- merged the third patch in v2 into first one

Changes in v3:
- fixes a compile warning reported by kernel test robot <lkp@intel.com>

Changes in v2:
- fixes another 2 bugs. (v1 is a single patch, see: https://lore.kernel.org/all/07736c2b7019b6883076a06129e06e8f7c5f7154.1656487154.git.mqaio@linux.alibaba.com/).
- to fix extra bugs, hinic_dev.tx_stats/rx_stats is removed, so there is no need to use spinlock or semaphore now.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When using hinic device as a bond slave device, and reading device stats
of master bond device, the kernel may hung.

The kernel panic calltrace as follows:
Kernel panic - not syncing: softlockup: hung tasks
Call trace:
  native_queued_spin_lock_slowpath+0x1ec/0x31c
  dev_get_stats+0x60/0xcc
  dev_seq_printf_stats+0x40/0x120
  dev_seq_show+0x1c/0x40
  seq_read_iter+0x3c8/0x4dc
  seq_read+0xe0/0x130
  proc_reg_read+0xa8/0xe0
  vfs_read+0xb0/0x1d4
  ksys_read+0x70/0xfc
  __arm64_sys_read+0x20/0x30
  el0_svc_common+0x88/0x234
  do_el0_svc+0x2c/0x90
  el0_svc+0x1c/0x30
  el0_sync_handler+0xa8/0xb0
  el0_sync+0x148/0x180

And the calltrace of task that actually caused kernel hungs as follows:
  __switch_to+124
  __schedule+548
  schedule+72
  schedule_timeout+348
  __down_common+188
  __down+24
  down+104
  hinic_get_stats64+44 [hinic]
  dev_get_stats+92
  bond_get_stats+172 [bonding]
  dev_get_stats+92
  dev_seq_printf_stats+60
  dev_seq_show+24
  seq_read_iter+964
  seq_read+220
  proc_reg_read+164
  vfs_read+172
  ksys_read+108
  __arm64_sys_read+28
  el0_svc_common+132
  do_el0_svc+40
  el0_svc+24
  el0_sync_handler+164
  el0_sync+324

When getting device stats from bond, kernel will call bond_get_stats().
It first holds the spinlock bond->stats_lock, and then call
hinic_get_stats64() to collect hinic device's stats.
However, hinic_get_stats64() calls `down(&nic_dev->mgmt_lock)` to
protect its critical section, which may schedule current task out.
And if system is under high pressure, the task cannot be woken up
immediately, which eventually triggers kernel hung panic.

Since previous patch has replaced hinic_dev.tx_stats/rx_stats with local
variable in hinic_get_stats64(), there is nothing need to be protected
by lock, so just removing down()/up() is ok.

Fixes: edd384f6 ("net-next/hinic: Add ethtool and stats")
Signed-off-by: Qiao Ma <mqaio@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function hinic_get_stats64() will do two operations:
1. reads stats from every hinic_rxq/txq and accumulates them
2. calls hinic_rxq/txq_clean_stats() to clean every rxq/txq's stats

For hinic_get_stats64(), it could get right data, because it sums all
data to nic_dev->rx_stats/tx_stats.
But it is wrong for get_drv_queue_stats(), this function will read
hinic_rxq's stats, which have been cleared to zero by hinic_get_stats64().

I have observed hinic's cleanup operation by using such command:
> watch -n 1 "cat ethtool -S eth4 | tail -40"

Result before:
     ...
     rxq7_pkts: 1
     rxq7_bytes: 90
     rxq7_errors: 0
     rxq7_csum_errors: 0
     rxq7_other_errors: 0
     ...
     rxq9_pkts: 11
     rxq9_bytes: 726
     rxq9_errors: 0
     rxq9_csum_errors: 0
     rxq9_other_errors: 0
     ...
     rxq11_pkts: 0
     rxq11_bytes: 0
     rxq11_errors: 0
     rxq11_csum_errors: 0
     rxq11_other_errors: 0

Result after a few seconds:
     ...
     rxq7_pkts: 0
     rxq7_bytes: 0
     rxq7_errors: 0
     rxq7_csum_errors: 0
     rxq7_other_errors: 0
     ...
     rxq9_pkts: 2
     rxq9_bytes: 132
     rxq9_errors: 0
     rxq9_csum_errors: 0
     rxq9_other_errors: 0
     ...
     rxq11_pkts: 1
     rxq11_bytes: 170
     rxq11_errors: 0
     rxq11_csum_errors: 0
     rxq11_other_errors: 0

To solve this problem, we just keep every queue's total stats in their own
queue (aka hinic_{rxq|txq}), and simply sum all per-queue stats every time
calling hinic_get_stats64().
With that solution, there is no need to clean per-queue stats now,
and there is no need to maintain global hinic_dev.{tx|rx}_stats, too.

Fixes: edd384f6 ("net-next/hinic: Add ethtool and stats")
Signed-off-by: Qiao Ma <mqaio@linux.alibaba.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
tls: rx: nopad and backlog flushing

This small series contains the two changes I've been working
towards in the previous ~50 patches a couple of months ago.

The first major change is the optional "nopad" optimization.
Currently TLS 1.3 Rx performs quite poorly because it does
not support the "zero-copy" or rather direct decrypt to a user
space buffer. Because of TLS 1.3 record padding we don't
know if a record contains data or a control message until
we decrypt it. Most records will contain data, tho, so the
optimization is to try the decryption hoping its data and
retry if it wasn't.

The performance gain from doing that is significant (~40%)
but if I'm completely honest the major reason is that we
call skb_cow_data() on the non-"zc" path. The next series
will remove the CoW, dropping the gain to only ~10%.

The second change is to flush the backlog every 128kB.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We continuously hold the socket lock during large reads and writes.
This may inflate RTT and negatively impact TCP performance.
Flush the backlog periodically. I tried to pick a flush period (128kB)
which gives significant benefit but the max Bps rate is not yet visibly
impacted.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a self-test variant with TLS 1.3 nopad set.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since optimisitic decrypt may add extra load in case of retries
require socket owner to explicitly opt-in.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We currently don't support decrypt to user buffer with TLS 1.3
because we don't know the record type and how much padding
record contains before decryption. In practice data records
are by far most common and padding gets used rarely so
we can assume data record, no padding, and if we find out
that wasn't the case - retry the crypto in place (decrypt
to skb).

To safeguard from user overwriting content type and padding
before we can check it attach a 1B sg entry where last byte
of the record will land.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

To make future patches easier to review make data_len
contain the length of the data, without the tail.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: Path manager fixes for 5.19

The MPTCP userspace path manager is new in 5.19, and these patches fix
some issues in that new code.

Patches 1-3 fix path manager locking issues.

Patches 4 and 5 allow userspace path managers to change priority of
established subflows using the existing MPTCP_PM_CMD_SET_FLAGS generic
netlink command. Includes corresponding self test update.

Patches 6 and 7 fix accounting of available endpoint IDs and the
MPTCP_MIB_RMSUBFLOW counter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch increases MPTCP_MIB_RMSUBFLOW mib counter in userspace pm
destroy subflow function mptcp_nl_cmd_sf_destroy() when removing subflow.

Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment")
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In mptcp_pm_nl_rm_addr_or_subflow() we always mark as available
the id corresponding to the just removed address.

The used bitmap actually tracks only the local IDs: we must
restrict the operation when a (local) subflow is removed.

Fixes: a88c9e49 ("mptcp: do not block subflows creation on errors")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>