- 26 Sep, 2018 23 commits
-
-
Julian Wiedmann authored
qeth_core_probe_device() sets the gdev's drvdata, but doesn't reset it on a subsequent error. Move the (re-)setting around a bit, so that it happens symmetrically on allocating/freeing the qeth_card struct. This is no actual problem, as the ccwgroup core will discard the gdev on a probe error. But from qeth's perspective the gdev is an external resource, so it's best to manage it cleanly. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
Device initialization code usually first loads a subdriver (via qeth_core_load_discipline()), and then runs its setup() callback. If this fails, it rolls back the load via qeth_core_free_discipline(). qeth_core_free_discipline() expects the options.layer attribute to be initialized, but on error in setup() that's currently not the case. Resulting in misbalanced symbol_put() calls. Fix this by setting options.layer when loading the subdriver. Signed-off-by:
-
Julian Wiedmann authored
Consolidate declaration and initialization of a static variable. While at it reduce its scope in qeth_core_load_discipline(), and simplify the return logic accordingly. Signed-off-by:
-
Julian Wiedmann authored
While the raw values are fixed due to their use in a sysfs attribute, we can still use the proper QETH_DISCIPLINE_* enum within the driver. Also move the initialization into qeth_set_initial_options(), along with all other user-configurable fields. Signed-off-by:
-
David S. Miller authored
Local variable 'autoneg' doesn't even exist: drivers/net/phy/marvell.c: In function 'm88e1121_config_aneg': drivers/net/phy/marvell.c:468:25: error: 'autoneg' undeclared (first use in this function); did you mean 'put_net'? if (phydev->autoneg != autoneg || changed) { ^~~~~~~ Fixes: d6ab9336 ("net: phy: marvell: Avoid unnecessary soft reset") Reported-by:Vakul Garg <vakul.garg@nxp.com> Signed-off-by:
-
Roopa Prabhu authored
Fixes: ed842fae ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports") Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-09-25 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Allow for RX stack hardening by implementing the kernel's flow dissector in BPF. Idea was originally presented at netconf 2017 [0]. Quote from merge commit: [...] Because of the rigorous checks of the BPF verifier, this provides significant security guarantees. In particular, the BPF flow dissector cannot get inside of an infinite loop, as with CVE-2013-4348, because BPF programs are guaranteed to terminate. It cannot read outside of packet bounds, because all memory accesses are checked. Also, with BPF the administrator can decide which protocols to support, reducing potential attack surface. Rarely encountered protocols can be excluded from dissection and the program can be updated without kernel recompile or reboot if a bug is discovered. [...] Also, a sample flow dissector has been implemented in BPF as part of this work, from Petar and Willem. [0] http://vger.kernel.org/netconf2017_files/rx_hardening_and_udp_gso.pdf 2) Add support for bpftool to list currently active attachment points of BPF networking programs providing a quick overview similar to bpftool's perf subcommand, from Yonghong. 3) Fix a verifier pruning instability bug where a union member from the register state was not cleared properly leading to branches not being pruned despite them being valid candidates, from Alexei. 4) Various smaller fast-path optimizations in XDP's map redirect code, from Jesper. 5) Enable to recognize BPF_MAP_TYPE_REUSEPORT_SOCKARRAY maps in bpftool, from Roman. 6) Remove a duplicate check in libbpf that probes for function storage, from Taeung. 7) Fix an issue in test_progs by avoid checking for errno since on success its value should not be checked, from Mauricio. 8) Fix unused variable warning in bpf_getsockopt() helper when CONFIG_INET is not configured, from Anders. 9) Fix a compilation failure in the BPF sample code's use of bpf_flow_keys, from Prashant. 10) Minor cleanups in BPF code, from Yue and Zhong. ==================== Signed-off-by: -
Hauke Mehrtens authored
The driver uses devm_ioremap_resource() which is only available when CONFIG_HAS_IOMEM is set, make the driver depend on this config option. User mode Linux does not have CONFIG_HAS_IOMEM set and the driver was failing on this architecture. Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: phy: Eliminate unnecessary soft This patch series eliminates unnecessary software resets of the PHY. This should hopefully not break anybody's hardware; but I would appreciate testing to make sure this is is the case. Sorry for this long email list, I wanted to make sure I reached out to all people who made changes to the Marvell PHY driver. Thank you! Changes since RFT: - added Tested-by tags from Wang, Dongsheng, Andrew, Chris and Clemens ==================== Signed-off-by: -
Florian Fainelli authored
The BMCR.RESET bit on the Marvell PHYs has a special meaning in that it commits the register writes into the HW for it to latch and be configured appropriately. Doing software resets causes link drops, and this is unnecessary disruption if nothing changed. Determine from marvell_set_polarity()'s return code whether the register value was changed and if it was, propagate that to the logic that hits the software reset bit. This avoids doing unnecessary soft reset if the PHY is configured in the same state it was previously, this also eliminates the need for a m88e1111_config_aneg() function since it now is the same as marvell_config_aneg(). Tested-by:
Wang, Dongsheng <dongsheng.wang@hxt-semitech.com> Tested-by:
Chris Healy <cphealy@gmail.com> Tested-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
While consolidating the PHY reset in phy_init_hw() an unconditionaly BMCR soft-reset I became quite trigger happy with those. This was later on deactivated for the Generic PHY driver on the premise that a prior software entity (e.g: bootloader) might have applied workarounds in commit 0878fff1 ("net: phy: Do not perform software reset for Generic PHY"). Since we have a hook to wire-up a soft_reset callback, just use that and get rid of the call to genphy_soft_reset() entirely. This speeds up initialization and link establishment for most PHYs out there that do not require a reset. Fixes: 87aa9f9c ("net: phy: consolidate PHY reset in phy_init_hw()") Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2018-09-25 This series contains updates to i40e and xsk. Mariusz fixes an issue where the VF link state was not being updated properly when the PF is down or up. Also cleaned up the promiscuous configuration during a VF reset. Patryk simplifies the code a bit to use the variables for PF and HW that are declared, rather than using the VSI pointers. Cleaned up the message length parameter to several virtchnl functions, since it was not being used (or needed). Harshitha fixes two potential race conditions when trying to change VF settings by creating a helper function to validate that the VF is enabled and that the VSI is set up. Sergey corrects a double "link down" message by putting in a check for whether or not the link is up or going down. Björn addresses an AF_XDP zero-copy issue that buffers passed from userspace to the kernel was leaked when the hardware descriptor ring was torn down. A zero-copy capable driver picks buffers off the fill ring and places them on the hardware receive ring to be completed at a later point when DMA is complete. Similar on the transmit side; The driver picks buffers off the transmit ring and places them on the transmit hardware ring. In the typical flow, the receive buffer will be placed onto an receive ring (completed to the user), and the transmit buffer will be placed on the completion ring to notify the user that the transfer is done. However, if the driver needs to tear down the hardware rings for some reason (interface goes down, reconfiguration and such), the userspace buffers cannot be leaked. They have to be reused or completed back to userspace. ==================== Signed-off-by: -
David S. Miller authored
Vlad Buslov says: ==================== Refactor classifier API to work with Qdisc/blocks without rtnl lock Currently, all netlink protocol handlers for updating rules, actions and qdiscs are protected with single global rtnl lock which removes any possibility for parallelism. This patch set is a third step to remove rtnl lock dependency from TC rules update path. Recently, new rtnl registration flag RTNL_FLAG_DOIT_UNLOCKED was added. Handlers registered with this flag are called without RTNL taken. End goal is to have rule update handlers(RTM_NEWTFILTER, RTM_DELTFILTER, etc.) to be registered with UNLOCKED flag to allow parallel execution. However, there is no intention to completely remove or split rtnl lock itself. This patch set addresses specific problems in implementation of classifiers API that prevent its control path from being executed concurrently. Additional changes are required to refactor classifiers API and individual classifiers for parallel execution. This patch set lays groundwork to eventually register rule update handlers as rtnl-unlocked by modifying code in cls API that works with Qdiscs and blocks. Following patch set does the same for chains and classifiers. The goal of this change is to refactor tcf_block_find() and its dependencies to allow concurrent execution: - Extend Qdisc API with rcu to lookup and take reference to Qdisc without relying on rtnl lock. - Extend tcf_block with atomic reference counting and rcu. - Always take reference to tcf_block while working with it. - Implement tcf_block_release() to release resources obtained by tcf_block_find() - Create infrastructure to allow registering Qdiscs with class ops that do not require the caller to hold rtnl lock. All three netlink rule update handlers use tcf_block_find() to lookup Qdisc and block, and this patch set introduces additional means of synchronization to substitute rtnl lock in cls API. Some functions in cls and sch APIs have historic names that no longer clearly describe their intent. In order not make this code even more confusing when introducing their concurrency-friendly versions, rename these functions to describe actual implementation. Changes from V2 to V3: - Patch 1: - Explicitly include refcount.h in rtnetlink.h. - Patch 3: - Move rcu_head field to the end of struct Qdisc. - Rearrange local variable declarations in qdisc_lookup_rcu(). - Patch 5: - Remove tcf_qdisc_put() and inline its content to callers. Changes from V1 to V2: - Rebase on latest net-next. - Patch 8 - remove. - Patch 9 - fold into patch 11. - Patch 11: - Rename tcf_block_{get|put}() to tcf_block_refcnt_{get|put}(). - Patch 13 - remove. ==================== Acked-by:Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Vlad Buslov authored
In order to remove dependency on rtnl lock on rules update path, always take reference to block while using it on rules update path. Change tcf_block_get() error handling to properly release block with reference counting, instead of just destroying it, in order to accommodate potential concurrent users. Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Vlad Buslov authored
Implement get/put function for blocks that only take/release the reference and perform deallocation. These functions are intended to be used by unlocked rules update path to always hold reference to block while working with it. They use on new fine-grained locking mechanisms introduced in previous patches in this set, instead of relying on global protection provided by rtnl lock. Extract code that is common with tcf_block_detach_ext() into common function __tcf_block_put(). Extend tcf_block with rcu to allow safe deallocation when it is accessed concurrently. Signed-off-by:
-
Vlad Buslov authored
Protect block idr access with spinlock, instead of relying on rtnl lock. Take tn->idr_lock spinlock during block insertion and removal. Signed-off-by:
-
Vlad Buslov authored
Extract code that flushes and puts all chains on tcf block to two standalone function to be shared with functions that locklessly get/put reference to block. Signed-off-by:
-
Vlad Buslov authored
As a preparation for removing rtnl lock dependency from rules update path, change tcf block reference counter type to refcount_t to allow modification by concurrent users. In block put function perform decrement and check reference counter once to accommodate concurrent modification by unlocked users. After this change tcf_chain_put at the end of block put function is called with block->refcnt==0 and will deallocate block after the last chain is released, so there is no need to manually deallocate block in this case. However, if block reference counter reached 0 and there are no chains to release, block must still be deallocated manually. Signed-off-by:
-
Vlad Buslov authored
As a preparation from removing rtnl lock dependency from rules update path, use Qdisc rcu and reference counting capabilities instead of relying on rtnl lock while working with Qdiscs. Create new tcf_block_release() function, and use it to free resources taken by tcf_block_find(). Currently, this function only releases Qdisc and it is extended in next patches in this series. Signed-off-by:
-
Vlad Buslov authored
Implement function to take reference to Qdisc that relies on rcu read lock instead of rtnl mutex. Function only takes reference to Qdisc if reference counter isn't zero. Intended to be used by unlocked cls API. Signed-off-by:
-
Vlad Buslov authored
Currently, Qdisc API functions assume that users have rtnl lock taken. To implement rtnl unlocked classifiers update interface, Qdisc API must be extended with functions that do not require rtnl lock. Extend Qdisc structure with rcu. Implement special version of put function qdisc_put_unlocked() that is called without rtnl lock taken. This function only takes rtnl lock if Qdisc reference counter reached zero and is intended to be used as optimization. Signed-off-by:
-
Vlad Buslov authored
Current implementation of qdisc_destroy() decrements Qdisc reference counter and only actually destroy Qdisc if reference counter value reached zero. Rename qdisc_destroy() to qdisc_put() in order for it to better describe the way in which this function currently implemented and used. Extract code that deallocates Qdisc into new private qdisc_destroy() function. It is intended to be shared between regular qdisc_put() and its unlocked version that is introduced in next patch in this series. Signed-off-by:
-
Vlad Buslov authored
Rtnl lock is encapsulated in netlink and cannot be accessed by other modules directly. This means that reference counted objects that rely on rtnl lock cannot use it with refcounter helper function that atomically releases decrements reference and obtains mutex. This patch implements simple wrapper function around refcount_dec_and_lock that obtains rtnl lock if reference counter value reached 0. Signed-off-by:
-
- 25 Sep, 2018 17 commits
-
-
Björn Töpel authored
When an AF_XDP UMEM is attached to any of the Rx rings, we disallow a user to change the number of descriptors via e.g. "ethtool -G IFNAME". Otherwise, the size of the stash/reuse queue can grow unbounded, which would result in OOM or leaking userspace buffers. Signed-off-by:
Björn Töpel <bjorn.topel@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Björn Töpel authored
Outstanding Rx descriptors are temporarily stored on a stash/reuse queue. When/if the HW rings comes up again, entries from the stash are used to re-populate the ring. The latter required some restructuring of the allocation scheme for the AF_XDP zero-copy implementation. There is now a fast, and a slow allocation. The "fast allocation" is used from the fast-path and obtains free buffers from the fill ring and the internal recycle mechanism. The "slow allocation" is only used in ring setup, and obtains buffers from the fill ring and the stash (if any). Signed-off-by:
-
Jakub Kicinski authored
XSK UMEM is strongly single producer single consumer so reuse of frames is challenging. Add a simple "stash" of FILL packets to reuse for drivers to optionally make use of. This is useful when driver has to free (ndo_stop) or resize a ring with an active AF_XDP ZC socket. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Tested-by:
-
Björn Töpel authored
When the zero-copy enabled XDP Tx ring is torn down, due to configuration changes, outstanding frames on the hardware descriptor ring are queued on the completion ring. The completion ring has a back-pressure mechanism that will guarantee that there is sufficient space on the ring. Signed-off-by:
-
Patryk Małek authored
msglen parameter seems to be unused in several virtchnl function. This patch removes it from signatures of those functions. Signed-off-by:
Patryk Małek <patryk.malek@intel.com> Tested-by:
-
Sergey Nemov authored
When isup is false meaning that interface is going to shut down set new speed to 0 to avoid double 'NIC Link is Down' messages. Signed-off-by:
Sergey Nemov <sergey.nemov@intel.com> Tested-by:
-
Harshitha Ramamurthy authored
When we are trying to change VF settings, it is possible for 2 race conditions to happen. One, when the VF is created but not yet enabled. Second, the VF is enabled but the VSI is still not created or not yet re-created in the VF reset flow. This patch introduces a helper function to validate that the VF is enabled and that the VSI is set up. This patch also calls this function from other functions which could get into these race conditions. While we are poking around here, remove unnecessary parenthesis that checkpatch was complaining about. Signed-off-by:
Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by:
-
Patryk Małek authored
In order to slightly simplify the code use the variables for pf and hw that are declared in i40e_set_mac function. Signed-off-by:
-
Mariusz Stachura authored
This patch cleans up promiscuous configuration when a VF reset occurs. Previously the promiscuous mode settings were still there after the VF driver removal. Signed-off-by:
Mariusz Stachura <mariusz.stachura@intel.com> Tested-by:
-
Mariusz Stachura authored
This resolves an issue where the VF link state was not being updated when the PF is down or up, and the VF link state would always show that it is running. Signed-off-by:
-
Vakul Garg authored
During socket close, if there is a open record with tx context, it needs to be be freed apart from freeing up plaintext and encrypted scatter lists. This patch frees up the open record if present in tx context. Also tls_free_both_sg() has been renamed to tls_free_open_rec() to indicate that the free record in tx context is being freed inside the function. Fixes: a42055e8 ("net/tls: Add support for async encryption") Signed-off-by:
-
Vakul Garg authored
Current async encryption implementation sometimes showed up socket memory accounting error during socket close. This results in kernel warning calltrace. The root cause of the problem is that socket var sk_forward_alloc gets corrupted due to access in sk_mem_charge() and sk_mem_uncharge() being invoked from multiple concurrent contexts in multicore processor. The apis sk_mem_charge() and sk_mem_uncharge() are called from functions alloc_plaintext_sg(), free_sg() etc. It is required that memory accounting apis are called under a socket lock. The plaintext sg data sent for encryption is freed using free_sg() in tls_encryption_done(). It is wrong to call free_sg() from this function. This is because this function may run in irq context. We cannot acquire socket lock in this function. We remove calling of function free_sg() for plaintext data from tls_encryption_done() and defer freeing up of plaintext data to the time when the record is picked up from tx_list and transmitted/freed. When tls_tx_records() gets called, socket is already locked and thus there is no concurrent access problem. Fixes: a42055e8 ("net/tls: Add support for async encryption") Signed-off-by:
-
David S. Miller authored
Version bump conflict in batman-adv, take what's in net-next. iavf conflict, adjustment of netdev_ops in net-next conflicting with poll controller method removal in net. Signed-off-by: -
Michal Simek authored
Clear ADDR64 dma bit in DMACFG register in case that HW_DMA_CAP_64B is not detected on 64bit system. The issue was observed when bootloader(u-boot) does not check macb feature at DCFG6 register (DAW64_OFFSET) and enabling 64bit dma support by default. Then macb driver is reading DMACFG register back and only adding 64bit dma configuration but not cleaning it out. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: series with smaller improvements This series includes smaller improvements, nothing exciting. ==================== Signed-off-by: -
Heiner Kallweit authored
The check for pci_is_pcie() is redundant here because all chip versions >=18 are PCIe only anyway. In addition use dma_set_mask_and_coherent() instead of separate calls to pci_set_dma_mask() and pci_set_consistent_dma_mask(). Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
Code can be slightly simplified by acking even events we're not interested in. In addition add a comment making clear that the read has no functional purpose and is just a PCI commit. Signed-off-by:
-
