- 05 Jul, 2017 33 commits
-
-
Eric Leblond authored
commit 87e94dbc upstream. This patch fixes the creation of connection tracking entry from netlink when synproxy is used. It was missing the addition of the synproxy extension. This was causing kernel crashes when a conntrack entry created by conntrackd was used after the switch of traffic from active node to the passive node. Signed-off-by:
Eric Leblond <eric@regit.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Serhey Popovych authored
[ Upstream commit db833d40 ] Network interface groups support added while ago, however there is no IFLA_GROUP attribute description in policy and netlink message size calculations until now. Add IFLA_GROUP attribute to the policy. Fixes: cbda10fa ("net_device: add support for network device groups") Signed-off-by:
Serhey Popovych <serhe.popovych@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Serhey Popovych authored
[ Upstream commit 07f61557 ] While commit 73ba57bf ("ipv6: fix backtracking for throw routes") does good job on error propagation to the fib_rules_lookup() in fib rules core framework that also corrects throw routes handling, it does not solve route reference leakage problem happened when we return -EAGAIN to the fib_rules_lookup() and leave routing table entry referenced in arg->result. If rule with matched throw route isn't last matched in the list we overwrite arg->result losing reference on throw route stored previously forever. We also partially revert commit ab997ad4 ("ipv6: fix the incorrect return value of throw route") since we never return routing table entry with dst.error == -EAGAIN when CONFIG_IPV6_MULTIPLE_TABLES is on. Also there is no point to check for RTF_REJECT flag since it is always set throw route. Fixes: 73ba57bf ("ipv6: fix backtracking for throw routes") Signed-off-by:
-
Gao Feng authored
[ Upstream commit 9745e362 ] The register_vlan_device would invoke free_netdev directly, when register_vlan_dev failed. It would trigger the BUG_ON in free_netdev if the dev was already registered. In this case, the netdev would be freed in netdev_run_todo later. So add one condition check now. Only when dev is not registered, then free it directly. The following is the part coredump when netdev_upper_dev_link failed in register_vlan_dev. I removed the lines which are too long. [ 411.237457] ------------[ cut here ]------------ [ 411.237458] kernel BUG at net/core/dev.c:7998! [ 411.237484] invalid opcode: 0000 [#1] SMP [ 411.237705] [last unloaded: 8021q] [ 411.237718] CPU: 1 PID: 12845 Comm: vconfig Tainted: G E 4.12.0-rc5+ #6 [ 411.237737] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [ 411.237764] task: ffff9cbeb6685580 task.stack: ffffa7d2807d8000 [ 411.237782] RIP: 0010:free_netdev+0x116/0x120 [ 411.237794] RSP: 0018:ffffa7d2807dbdb0 EFLAGS: 00010297 [ 411.237808] RAX: 0000000000000002 RBX: ffff9cbeb6ba8fd8 RCX: 0000000000001878 [ 411.237826] RDX: 0000000000000001 RSI: 0000000000000282 RDI: 0000000000000000 [ 411.237844] RBP: ffffa7d2807dbdc8 R08: 0002986100029841 R09: 0002982100029801 [ 411.237861] R10: 0004000100029980 R11: 0004000100029980 R12: ffff9cbeb6ba9000 [ 411.238761] R13: ffff9cbeb6ba9060 R14: ffff9cbe60f1a000 R15: ffff9cbeb6ba9000 [ 411.239518] FS: 00007fb690d81700(0000) GS:ffff9cbebb640000(0000) knlGS:0000000000000000 [ 411.239949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 411.240454] CR2: 00007f7115624000 CR3: 0000000077cdf000 CR4: 00000000003406e0 [ 411.240936] Call Trace: [ 411.241462] vlan_ioctl_handler+0x3f1/0x400 [8021q] [ 411.241910] sock_ioctl+0x18b/0x2c0 [ 411.242394] do_vfs_ioctl+0xa1/0x5d0 [ 411.242853] ? sock_alloc_file+0xa6/0x130 [ 411.243465] SyS_ioctl+0x79/0x90 [ 411.243900] entry_SYSCALL_64_fastpath+0x1e/0xa9 [ 411.244425] RIP: 0033:0x7fb69089a357 [ 411.244863] RSP: 002b:00007ffcd04e0fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 411.245445] RAX: ffffffffffffffda RBX: 00007ffcd04e2884 RCX: 00007fb69089a357 [ 411.245903] RDX: 00007ffcd04e0fd0 RSI: 0000000000008983 RDI: 0000000000000003 [ 411.246527] RBP: 00007ffcd04e0fd0 R08: 0000000000000000 R09: 1999999999999999 [ 411.246976] R10: 000000000000053f R11: 0000000000000202 R12: 0000000000000004 [ 411.247414] R13: 00007ffcd04e1128 R14: 00007ffcd04e2888 R15: 0000000000000001 [ 411.249129] RIP: free_netdev+0x116/0x120 RSP: ffffa7d2807dbdb0 Signed-off-by:
Gao Feng <gfree.wind@vip.163.com> Signed-off-by:
-
Wei Wang authored
[ Upstream commit 76371d2e ] In the existing dn_route.c code, dn_route_output_slow() takes dst->__refcnt before calling dn_insert_route() while dn_route_input_slow() does not take dst->__refcnt before calling dn_insert_route(). This makes the whole routing code very buggy. In dn_dst_check_expire(), dnrt_free() is called when rt expires. This makes the routes inserted by dn_route_output_slow() not able to be freed as the refcnt is not released. In dn_dst_gc(), dnrt_drop() is called to release rt which could potentially cause the dst->__refcnt to be dropped to -1. In dn_run_flush(), dst_free() is called to release all the dst. Again, it makes the dst inserted by dn_route_output_slow() not able to be released and also, it does not wait on the rcu and could potentially cause crash in the path where other users still refer to this dst. This patch makes sure both input and output path do not take dst->__refcnt before calling dn_insert_route() and also makes sure dnrt_free()/dst_free() is called when removing dst from the hash table. The only difference between those 2 calls is that dnrt_free() waits on the rcu while dst_free() does not. Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Maor Dickman authored
[ Upstream commit f0b38117 ] Misuse of (BIT) macro caused to report wrong flags for "Hardware Transmit Timestamp Modes" and "Hardware Receive Filter Modes" Fixes: ef9814de ('net/mlx5e: Add HW timestamping (TS) support') Signed-off-by:
Maor Dickman <maord@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Eli Cohen authored
[ Upstream commit 6c780a02 ] Before attempting to initialize the command interface we must wait till the fw_initializing bit is clear. If we fail to meet this condition the hardware will drop our configuration, specifically the descriptors page address. This scenario can happen when the firmware is still executing an FLR flow and did not finish yet so the driver needs to wait for that to finish. Fixes: e3297246 ('net/mlx5_core: Wait for FW readiness on startup') Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
Or Gerlitz authored
[ Upstream commit 31ac9338 ] The error flow of mlx5e_create_netdev calls the cleanup call of the given profile without checking if it exists, fix that. Currently the VF reps don't register that callback and we crash if getting into error -- can be reproduced by the user doing ctrl^C while attempting to change the sriov mode from legacy to switchdev. Fixes: 26e59d80 '(net/mlx5e: Implement mlx5e interface attach/detach callbacks') Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reported-by:
Sabrina Dubroca <sdubroca@redhat.com> Signed-off-by:
-
Chris Mi authored
[ Upstream commit 5f195c2c ] The offending commit only changed the code path for PF/VF, but it didn't take care of VF representors. As a result, since params->tx_min_inline_mode for VF representors is kzalloced to 0 (MLX5_INLINE_MODE_NONE), all VF reps SQs were set to that mode. This actually works on CX5 by default but broke CX4. Fix that by adding a call to query the min inline mode from the VF rep build up code. Fixes: a6f402e4 ("net/mlx5e: Tx, no inline copy on ConnectX-5") Signed-off-by:
Chris Mi <chrism@mellanox.com> Reviewed-by:
-
Xin Long authored
[ Upstream commit 988c7322 ] In sctp_for_each_transport, pos is used to save how many objs it has dumped. Now it gets the last obj by sctp_transport_get_idx, then gets the next obj by sctp_transport_get_next. The issue is that in the meanwhile if some objs in transport hashtable are removed and the objs nums are less than pos, sctp_transport_get_idx would return NULL and hti.walker.tbl is NULL as well. At this moment it should stop hti, instead of continue getting the next obj. Or it would cause a NULL pointer dereference in sctp_transport_get_next. This patch is to pass pos + 1 into sctp_transport_get_idx to get the next obj directly, even if pos > objs nums, it would return NULL and stop hti. Fixes: 626d16f5 ("sctp: export some apis or variables for sctp_diag and reuse some for proc") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit f8a894b2 ] Now when starting the dad work in addrconf_mod_dad_work, if the dad work is idle and queued, it needs to hold ifa. The problem is there's one gap in [1], during which if the pending dad work is removed elsewhere. It will miss to hold ifa, but the dad word is still idea and queue. if (!delayed_work_pending(&ifp->dad_work)) in6_ifa_hold(ifp); <--------------[1] mod_delayed_work(addrconf_wq, &ifp->dad_work, delay); An use-after-free issue can be caused by this. Chen Wei found this issue when WARN_ON(!hlist_unhashed(&ifp->addr_lst)) in net6_ifa_finish_destroy was hit because of it. As Hannes' suggestion, this patch is to fix it by holding ifa first in addrconf_mod_dad_work, then calling mod_delayed_work and putting ifa if the dad_work is already in queue. Note that this patch did not choose to fix it with: if (!mod_delayed_work(delay)) in6_ifa_hold(ifp); As with it, when delay == 0, dad_work would be scheduled immediately, all addrconf_mod_dad_work(0) callings had to be moved under ifp->lock. Reported-by:
Wei Chen <weichen@redhat.com> Suggested-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
-
Jesper Dangaard Brouer authored
[ Upstream commit 849a44de ] Florian Weimer seems to have a glibc test-case which requires that loopback interfaces does not get ICMP ratelimited. This was broken by commit c0303efe ("net: reduce cycles spend on ICMP replies that gets rate limited"). An ICMP response will usually be routed back-out the same incoming interface. Thus, take advantage of this and skip global ICMP ratelimit when the incoming device is loopback. In the unlikely event that the outgoing it not loopback, due to strange routing policy rules, ICMP rate limiting still works via peer ratelimiting via icmpv4_xrlim_allow(). Thus, we should still comply with RFC1812 (section 4.3.2.8 "Rate Limiting"). This seems to fix the reproducer given by Florian. While still avoiding to perform expensive and unneeded outgoing route lookup for rate limited packets (in the non-loopback case). Fixes: c0303efe ("net: reduce cycles spend on ICMP replies that gets rate limited") Reported-by:
Florian Weimer <fweimer@redhat.com> Reported-by:
"H.J. Lu" <hjl.tools@gmail.com> Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 60cfe1ea ] A new Sierra Wireless EM7305 device ID used in a Toshiba laptop, and two Longcheer device IDs entries used by Telewell TW-3G HSPA+ branded modems. Reported-by:
Petr Kloc <petr_kloc@yahoo.com> Reported-by:
Teemu Likonen <tlikonen@iki.fi> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
WANG Cong authored
[ Upstream commit b4846fc3 ] Andrey reported a lockdep warning on non-initialized spinlock: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 1 PID: 4099 Comm: a.out Not tainted 4.12.0-rc6+ #9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 register_lock_class+0x717/0x1aa0 kernel/locking/lockdep.c:755 ? 0xffffffffa0000000 __lock_acquire+0x269/0x3690 kernel/locking/lockdep.c:3255 lock_acquire+0x22d/0x560 kernel/locking/lockdep.c:3855 __raw_spin_lock_bh ./include/linux/spinlock_api_smp.h:135 _raw_spin_lock_bh+0x36/0x50 kernel/locking/spinlock.c:175 spin_lock_bh ./include/linux/spinlock.h:304 ip_mc_clear_src+0x27/0x1e0 net/ipv4/igmp.c:2076 igmpv3_clear_delrec+0xee/0x4f0 net/ipv4/igmp.c:1194 ip_mc_destroy_dev+0x4e/0x190 net/ipv4/igmp.c:1736 We miss a spin_lock_init() in igmpv3_add_delrec(), probably because previously we never use it on this code path. Since we already unlink it from the global mc_tomb list, it is probably safe not to acquire this spinlock here. It does not harm to have it although, to avoid conditional locking. Fixes: c38b7d32 ("igmp: acquire pmc lock for ip_mc_clear_src()") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit c38b7d32 ] Andrey reported a use-after-free in add_grec(): for (psf = *psf_list; psf; psf = psf_next) { ... psf_next = psf->sf_next; where the struct ip_sf_list's were already freed by: kfree+0xe8/0x2b0 mm/slub.c:3882 ip_mc_clear_src+0x69/0x1c0 net/ipv4/igmp.c:2078 ip_mc_dec_group+0x19a/0x470 net/ipv4/igmp.c:1618 ip_mc_drop_socket+0x145/0x230 net/ipv4/igmp.c:2609 inet_release+0x4e/0x1c0 net/ipv4/af_inet.c:411 sock_release+0x8d/0x1e0 net/socket.c:597 sock_close+0x16/0x20 net/socket.c:1072 This happens because we don't hold pmc->lock in ip_mc_clear_src() and a parallel mr_ifc_timer timer could jump in and access them. The RCU lock is there but it is merely for pmc itself, this spinlock could actually ensure we don't access them in parallel. Thanks to Eric and Long for discussion on this bug. Reported-by:
-
Christian Perle authored
[ Upstream commit 3500cd73 ] Reading /proc/net/snmp6 yields bogus values on 32 bit kernels. Use "u64" instead of "unsigned long" in sizeof(). Fixes: 4a4857b1 ("proc: Reduce cache miss in snmp6_seq_show") Signed-off-by:
Christian Perle <christian.perle@secunet.com> Signed-off-by:
-
Majd Dibbiny authored
[ Upstream commit 91828bd8 ] When the page size isn't bigger than 4K, there is no added value of enabling 4K UAR feature in the Firmware. Modified the condition of enabling the 4K UAR accordingly. Fixes: f502d834 ("net/mlx5: Activate support for 4K UARs") Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
-
Tal Gilboa authored
[ Upstream commit 53acd76c ] DIM (Dynamically-tuned Interrupt Moderation) is a mechanism designed for changing the channel interrupt moderation values in order to reduce CPU overhead for all traffic types. Each iteration of the algorithm, DIM calculates the difference in throughput, packet rate and interrupt rate from last iteration in order to make a decision. DIM relies on counters for each metric. When these counters get to their type's max value they wraparound. In this case the delta between 'end' and 'start' samples is negative and when translated to unsigned integers - very high. This results in a false indication to the algorithm and might result in a wrong decision. The fix calculates the 'distance' between 'end' and 'start' samples in a cyclic way around the relevant type's max value. It can also be viewed as an absolute value around the type's max value instead of around 0. Testing show higher stability in DIM profile selection and no wraparound issues. Fixes: cb3c7fd4 ("net/mlx5e: Support adaptive RX coalescing") Signed-off-by:
Tal Gilboa <talgi@mellanox.com> Signed-off-by:
-
Tal Gilboa authored
[ Upstream commit c3164d2f ] DIM (Dynamically-tuned Interrupt Moderation) is a mechanism designed for changing the channel interrupt moderation values in order to reduce CPU overhead for all traffic types. Until now only interrupt and packet rate were sampled. We found a scenario on which we get a false indication since a change in DIM caused more aggregation and reduced packet rate while increasing BW. We now regard a change as succesfull iff: current_BW > (prev_BW + threshold) or current_BW ~= prev_BW and current_PR > (prev_PR + threshold) or current_BW ~= prev_BW and current_PR ~= prev_PR and current_IR < (prev_IR - threshold) Where BW = Bandwidth, PR = Packet rate and IR = Interrupt rate Improvements (ConnectX-4Lx 25GbE, single RX queue, LRO off) -------------------------------------------------- packet size | before[Mb/s] | after[Mb/s] | gain | 2B | 343.4 | 359.4 | 4.5% | 16B | 2739.7 | 2814.8 | 2.7% | 64B | 9739 | 10185.3 | 4.5% | Fixes: cb3c7fd4 ("net/mlx5e: Support adaptive RX coalescing") Signed-off-by:
-
Huy Nguyen authored
[ Upstream commit f729860a ] Remove the following module event counters out of ethtool stats. The reason for removing these event counters is that these events do not occur without techinician's intervention. module_pwr_budget_exd module_long_range module_no_eeprom module_enforce_part module_unknown_id module_unknown_status module_plug Fixes: bedb7c90 ("net/mlx5e: Add port module event counters to ethtool stats") Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Reviewed by: Gal Pressman <galp@mellanox.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 343eba69 ] The kernel may sleep under a rcu read lock in tipc_msg_reverse, and the function call path is: tipc_l2_rcv_msg (acquire the lock by rcu_read_lock) tipc_rcv tipc_sk_rcv tipc_msg_reverse pskb_expand_head(GFP_KERNEL) --> may sleep tipc_node_broadcast tipc_node_xmit_skb tipc_node_xmit tipc_sk_rcv tipc_msg_reverse pskb_expand_head(GFP_KERNEL) --> may sleep To fix it, "GFP_KERNEL" is replaced with "GFP_ATOMIC". Signed-off-by:
Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit f146e872 ] The kernel may sleep under a rcu read lock in cfpkt_create_pfx, and the function call path is: cfcnfg_linkup_rsp (acquire the lock by rcu_read_lock) cfctrl_linkdown_req cfpkt_create cfpkt_create_pfx alloc_skb(GFP_KERNEL) --> may sleep cfserl_receive (acquire the lock by rcu_read_lock) cfpkt_split cfpkt_create_pfx alloc_skb(GFP_KERNEL) --> may sleep There is "in_interrupt" in cfpkt_create_pfx to decide use "GFP_KERNEL" or "GFP_ATOMIC". In this situation, "GFP_KERNEL" is used because the function is called under a rcu read lock, instead in interrupt. To fix it, only "GFP_ATOMIC" is used in cfpkt_create_pfx. Signed-off-by:
-
Xin Long authored
[ Upstream commit 581409da ] Now sctp holds read_lock when foreach sctp_ep_hashtable without disabling BH. If CPU schedules to another thread A at this moment, the thread A may be trying to hold the write_lock with disabling BH. As BH is disabled and CPU cannot schedule back to the thread holding the read_lock, while the thread A keeps waiting for the read_lock. A dead lock would be triggered by this. This patch is to fix this dead lock by calling read_lock_bh instead to disable BH when holding the read_lock in sctp_for_each_endpoint. Fixes: 626d16f5 ("sctp: export some apis or variables for sctp_diag and reuse some for proc") Reported-by:
Xiumei Mu <xmu@redhat.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Krister Johansen authored
[ Upstream commit f186ce61 ] It looks like this: Message from syslogd@flamingo at Apr 26 00:45:00 ... kernel:unregister_netdevice: waiting for lo to become free. Usage count = 4 They seem to coincide with net namespace teardown. The message is emitted by netdev_wait_allrefs(). Forced a kdump in netdev_run_todo, but found that the refcount on the lo device was already 0 at the time we got to the panic. Used bcc to check the blocking in netdev_run_todo. The only places where we're off cpu there are in the rcu_barrier() and msleep() calls. That behavior is expected. The msleep time coincides with the amount of time we spend waiting for the refcount to reach zero; the rcu_barrier() wait times are not excessive. After looking through the list of callbacks that the netdevice notifiers invoke in this path, it appears that the dst_dev_event is the most interesting. The dst_ifdown path places a hold on the loopback_dev as part of releasing the dev associated with the original dst cache entry. Most of our notifier callbacks are straight-forward, but this one a) looks complex, and b) places a hold on the network interface in question. I constructed a new bcc script that watches various events in the liftime of a dst cache entry. Note that dst_ifdown will take a hold on the loopback device until the invalidated dst entry gets freed. [ __dst_free] on DST: ffff883ccabb7900 IF tap1008300eth0 invoked at 1282115677036183 __dst_free rcu_nocb_kthread kthread ret_from_fork Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Mateusz Jurczyk authored
[ Upstream commit defbcf2d ] Verify that the caller-provided sockaddr structure is large enough to contain the sa_family field, before accessing it in bind() and connect() handlers of the AF_UNIX socket. Since neither syscall enforces a minimum size of the corresponding memory region, very short sockaddrs (zero or one byte long) result in operating on uninitialized memory while referencing .sa_family. Signed-off-by:
Mateusz Jurczyk <mjurczyk@google.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit 097d3c95 ] Commit 1aa6c4f6 ("net: vrf: Add l3mdev rules on first device create") adds the l3mdev FIB rule the first time a VRF device is created. However, it only creates the rule once and only in the namespace the first device is created - which may not be init_net. Fix by using the net_generic capability to make the add_fib_rules flag per network namespace. Fixes: 1aa6c4f6 ("net: vrf: Add l3mdev rules on first device create") Reported-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit 8397ed36 ] Roopa reported attempts to delete a bond device that is referenced in a multipath route is hanging: $ ifdown bond2 # ifupdown2 command that deletes virtual devices unregister_netdevice: waiting for bond2 to become free. Usage count = 2 Steps to reproduce: echo 1 > /proc/sys/net/ipv6/conf/all/ignore_routes_with_linkdown ip link add dev bond12 type bond ip link add dev bond13 type bond ip addr add 2001:db8:2::0/64 dev bond12 ip addr add 2001:db8:3::0/64 dev bond13 ip route add 2001:db8:33::0/64 nexthop via 2001:db8:2::2 nexthop via 2001:db8:3::2 ip link del dev bond12 ip link del dev bond13 The root cause is the recent change to keep routes on a linkdown. Update the check to detect when the device is unregistering and release the route for that case. Fixes: a1a22c12 ("net: ipv6: Keep nexthop of multipath route on admin down") Reported-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Mintz, Yuval authored
[ Upstream commit 0eed9cf5 ] Some of the structure's fields are not initialized by the rtnetlink. If driver doesn't set those in ndo_get_vf_config(), they'd leak memory to user. Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> CC: Michal Schmidt <mschmidt@redhat.com> Reviewed-by:
Greg Rose <gvrose8192@gmail.com> Signed-off-by:
-
Mateusz Jurczyk authored
[ Upstream commit dd0da17b ] Verify that the length of the socket buffer is sufficient to cover the nlmsghdr structure before accessing the nlh->nlmsg_len field for further input sanitization. If the client only supplies 1-3 bytes of data in sk_buff, then nlh->nlmsg_len remains partially uninitialized and contains leftover memory from the corresponding kernel allocation. Operating on such data may result in indeterminate evaluation of the nlmsg_len < sizeof(*nlh) expression. The bug was discovered by a runtime instrumentation designed to detect use of uninitialized memory in the kernel. The patch prevents this and other similar tools (e.g. KMSAN) from flagging this behavior in the future. Signed-off-by:
-
Johannes Berg authored
[ Upstream commit c7a61cba ] The change to remove free_netdev() from ieee80211_if_free() erroneously didn't add the necessary free_netdev() for when ieee80211_if_free() is called directly in one place, rather than as the priv_destructor. Add the missing call. Fixes: cf124db5 ("net: Fix inconsistent teardown and release of private netdev state.") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Stephen Rothwell authored
[ Upstream commit cd1997f6 ] Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
David S. Miller authored
[ Upstream commit cf124db5 ] Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by:
-
Alexander Potapenko authored
[ Upstream commit c28294b9 ] KMSAN reported a use of uninitialized memory in dev_set_alias(), which was caused by calling strlcpy() (which in turn called strlen()) on the user-supplied non-terminated string. Signed-off-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
-
- 29 Jun, 2017 7 commits
-
-
Greg Kroah-Hartman authored
-
Arend Van Spriel authored
commit 35abcd4f upstream. This fixes the following warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c: In function 'brcmf_usb_probe_phase2': drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c:1198:2: warning: 'devinfo' may be used uninitialized in this function [-Wmaybe-uninitialized] mutex_unlock(&devinfo->dev_init_lock); Fixes: 6d0507a7 ("brcmfmac: add parameter to pass error code in firmware callback") Cc: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Willem de Bruijn authored
commit 751a9c76 upstream. The patch in the Fixes references COMPAT_XT_ALIGN in the definition of XT_DATA_TO_USER, outside an #ifdef CONFIG_COMPAT block. Split XT_DATA_TO_USER into separate compat and non compat variants and define the first inside an CONFIG_COMPAT block. This simplifies both variants by removing branches inside the macro. Fixes: 324318f0 ("netfilter: xtables: zero padding in data_to_user") Reported-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Willem de Bruijn authored
commit 324318f0 upstream. When looking up an iptables rule, the iptables binary compares the aligned match and target data (XT_ALIGN). In some cases this can exceed the actual data size to include padding bytes. Before commit f77bc5b2 ("iptables: use match, target and data copy_to_user helpers") the malloc()ed bytes were overwritten by the kernel with kzalloced contents, zeroing the padding and making the comparison succeed. After this patch, the kernel copies and clears only data, leaving the padding bytes undefined. Extend the clear operation from data size to aligned data size to include the padding bytes, if any. Padding bytes can be observed in both match and target, and the bug triggered, by issuing a rule with match icmp and target ACCEPT: iptables -t mangle -A INPUT -i lo -p icmp --icmp-type 1 -j ACCEPT iptables -t mangle -D INPUT -i lo -p icmp --icmp-type 1 -j ACCEPT Fixes: f77bc5b2 ("iptables: use match, target and data copy_to_user helpers") Reported-by:
Paul Moore <pmoore@redhat.com> Reported-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
-
Russell King authored
commit 898805e0 upstream. The Marvell driver incorrectly provides phydev->lp_advertising as the logical and of the link partner's advert and our advert. This is incorrect - this field is supposed to store the link parter's unmodified advertisment. This allows ethtool to report the correct link partner auto-negotiation status. Fixes: be937f1f ("Marvell PHY m88e1111 driver fix") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Hauke Mehrtens authored
commit 833bfade upstream. The generic SPI code calculates how long the issued transfer would take and adds 100ms in addition to the timeout as tolerance. On my 500 MHz Lantiq Mips SoC I am getting timeouts from the SPI like this when the system boots up: m25p80 spi32766.4: SPI transfer timed out blk_update_request: I/O error, dev mtdblock3, sector 2 SQUASHFS error: squashfs_read_data failed to read block 0x6e After increasing the tolerance for the timeout to 200ms I haven't seen these SPI transfer time outs any more. The Lantiq SPI driver in use here has an extra work queue in between, which gets triggered when the controller send the last word and the hardware FIFOs used for reading and writing are only 8 words long. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
William Wu authored
commit b7f73850 upstream. Companion descriptor is only used for SuperSpeed endpoints, if the endpoints are HighSpeed or FullSpeed, the Companion descriptor will not allocated, so we can only access it if gadget is SuperSpeed. I can reproduce this issue on Rockchip platform rk3368 SoC which supports USB 2.0, and use functionfs for ADB. Kernel build with CONFIG_KASAN=y and CONFIG_SLUB_DEBUG=y report the following BUG: ================================================================== BUG: KASAN: slab-out-of-bounds in ffs_func_set_alt+0x224/0x3a0 at addr ffffffc0601f6509 Read of size 1 by task swapper/0/0 ============================================================================ BUG kmalloc-256 (Not tainted): kasan: bad access detected ---------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in ffs_func_bind+0x52c/0x99c age=1275 cpu=0 pid=1 alloc_debug_processing+0x128/0x17c ___slab_alloc.constprop.58+0x50c/0x610 __slab_alloc.isra.55.constprop.57+0x24/0x34 __kmalloc+0xe0/0x250 ffs_func_bind+0x52c/0x99c usb_add_function+0xd8/0x1d4 configfs_composite_bind+0x48c/0x570 udc_bind_to_driver+0x6c/0x170 usb_udc_attach_driver+0xa4/0xd0 gadget_dev_desc_UDC_store+0xcc/0x118 configfs_write_file+0x1a0/0x1f8 __vfs_write+0x64/0x174 vfs_write+0xe4/0x200 SyS_write+0x68/0xc8 el0_svc_naked+0x24/0x28 INFO: Freed in inode_doinit_with_dentry+0x3f0/0x7c4 age=1275 cpu=7 pid=247 ... Call trace: [<ffffff900808aab4>] dump_backtrace+0x0/0x230 [<ffffff900808acf8>] show_stack+0x14/0x1c [<ffffff90084ad420>] dump_stack+0xa0/0xc8 [<ffffff90082157cc>] print_trailer+0x188/0x198 [<ffffff9008215948>] object_err+0x3c/0x4c [<ffffff900821b5ac>] kasan_report+0x324/0x4dc [<ffffff900821aa38>] __asan_load1+0x24/0x50 [<ffffff90089eb750>] ffs_func_set_alt+0x224/0x3a0 [<ffffff90089d3760>] composite_setup+0xdcc/0x1ac8 [<ffffff90089d7394>] android_setup+0x124/0x1a0 [<ffffff90089acd18>] _setup+0x54/0x74 [<ffffff90089b6b98>] handle_ep0+0x3288/0x4390 [<ffffff90089b9b44>] dwc_otg_pcd_handle_out_ep_intr+0x14dc/0x2ae4 [<ffffff90089be85c>] dwc_otg_pcd_handle_intr+0x1ec/0x298 [<ffffff90089ad680>] dwc_otg_pcd_irq+0x10/0x20 [<ffffff9008116328>] handle_irq_event_percpu+0x124/0x3ac [<ffffff9008116610>] handle_irq_event+0x60/0xa0 [<ffffff900811af30>] handle_fasteoi_irq+0x10c/0x1d4 [<ffffff9008115568>] generic_handle_irq+0x30/0x40 [<ffffff90081159b4>] __handle_domain_irq+0xac/0xdc [<ffffff9008080e9c>] gic_handle_irq+0x64/0xa4 ... Memory state around the buggy address: ffffffc0601f6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc0601f6480: 00 00 00 00 00 00 00 00 00 00 06 fc fc fc fc fc >ffffffc0601f6500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffffffc0601f6580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffffc0601f6600: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00 ================================================================== Signed-off-by:
William Wu <william.wu@rock-chips.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Jerry Zhang <zhangjerry@google.com> Signed-off-by:
-
