- 28 Jul, 2016 17 commits
-
-
Michal Hocko authored
freezing_slow_path() is checking TIF_MEMDIE to skip OOM killed tasks. It is, however, checking the flag on the current task rather than the given one. This is really confusing because freezing() can be called also on !current tasks. It would end up working correctly for its main purpose because __refrigerator will be always called on the current task so the oom victim will never get frozen. But it could lead to surprising results when a task which is freezing a cgroup got oom killed because only part of the cgroup would get frozen. This is highly unlikely but worth fixing as the resulting code would be more clear anyway. Link: http://lkml.kernel.org/r/1467029719-17602-2-git-send-email-mhocko@kernel.orgSigned-off-by:
Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ganesh Mahendran authored
The caller __alloc_pages_direct_compact() already checked (order == 0) so there's no need to check again. Link: http://lkml.kernel.org/r/1465973568-3496-1-git-send-email-opensource.ganesh@gmail.comSigned-off-by:
Ganesh Mahendran <opensource.ganesh@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by:
-
Johannes Weiner authored
Commit 23047a96 ("mm: workingset: per-cgroup cache thrash detection") added a page->mem_cgroup lookup to the cache eviction, refault, and activation paths, as well as locking to the activation path, and the vm-scalability tests showed a regression of -23%. While the test in question is an artificial worst-case scenario that doesn't occur in real workloads - reading two sparse files in parallel at full CPU speed just to hammer the LRU paths - there is still some optimizations that can be done in those paths. Inline the lookup functions to eliminate calls. Also, page->mem_cgroup doesn't need to be stabilized when counting an activation; we merely need to hold the RCU lock to prevent the memcg from being freed. This cuts down on overhead quite a bit: 23047a96 063f6715e77a7be5770d6081fe ---------------- -------------------------- %stddev %change %stddev \ | \ 21621405 +- 0% +11.3% 24069657 +- 2% vm-scalability.throughput [linux@roeck-us.net: drop unnecessary include file] [hannes@cmpxchg.org: add WARN_ON_ONCE()s] Link: http://lkml.kernel.org/r/20160707194024.GA26580@cmpxchg.org Link: http://lkml.kernel.org/r/20160624175101.GA3024@cmpxchg.orgReported-by:
Ye Xiaolong <xiaolong.ye@intel.com> Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
zhong jiang authored
We need to assure the comment is consistent with the code. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1466171914-21027-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
-
Michal Hocko authored
"mm, oom: fortify task_will_free_mem" has dropped task_lock around task_will_free_mem in oom_kill_process bacause it assumed that a potential race when the selected task exits will not be a problem as the oom_reaper will call exit_oom_victim. Tetsuo was objecting that nommu doesn't have oom_reaper so the race would be still possible. The code would be racy and lockup prone theoretically in other aspects without the oom reaper anyway so I didn't considered this a big deal. But it seems that further changes I am planning in this area will benefit from stable task->mm in this path as well. So let's drop find_lock_task_mm from task_will_free_mem and call it from under task_lock as we did previously. Just pull the task->mm != NULL check inside the function. Link: http://lkml.kernel.org/r/1467201562-6709-1-git-send-email-mhocko@kernel.orgSigned-off-by:
-
Michal Hocko authored
The only case where the oom_reaper is not triggered for the oom victim is when it shares the memory with a kernel thread (aka use_mm) or with the global init. After "mm, oom: skip vforked tasks from being selected" the victim cannot be a vforked task of the global init so we are left with clone(CLONE_VM) (without CLONE_SIGHAND). use_mm() users are quite rare as well. In order to help forward progress for the OOM killer, make sure that this really rare case will not get in the way - we do this by hiding the mm from the oom killer by setting MMF_OOM_REAPED flag for it. oom_scan_process_thread will ignore any TIF_MEMDIE task if it has MMF_OOM_REAPED flag set to catch these oom victims. After this patch we should guarantee forward progress for the OOM killer even when the selected victim is sharing memory with a kernel thread or global init as long as the victims mm is still alive. Link: http://lkml.kernel.org/r/1466426628-15074-11-git-send-email-mhocko@kernel.orgSigned-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: David Rientjes <rientjes@google.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
-
Michal Hocko authored
oom_reaper relies on the mmap_sem for read to do its job. Many places which might block readers have been converted to use down_write_killable and that has reduced chances of the contention a lot. Some paths where the mmap_sem is held for write can take other locks and they might either be not prepared to fail due to fatal signal pending or too impractical to be changed. This patch introduces MMF_OOM_NOT_REAPABLE flag which gets set after the first attempt to reap a task's mm fails. If the flag is present after the failure then we set MMF_OOM_REAPED to hide this mm from the oom killer completely so it can go and chose another victim. As a result a risk of OOM deadlock when the oom victim would be blocked indefinetly and so the oom killer cannot make any progress should be mitigated considerably while we still try really hard to perform all reclaim attempts and stay predictable in the behavior. Link: http://lkml.kernel.org/r/1466426628-15074-10-git-send-email-mhocko@kernel.orgSigned-off-by:
-
Michal Hocko authored
The 0-day robot has encountered the following: Out of memory: Kill process 3914 (trinity-c0) score 167 or sacrifice child Killed process 3914 (trinity-c0) total-vm:55864kB, anon-rss:1512kB, file-rss:1088kB, shmem-rss:25616kB oom_reaper: reaped process 3914 (trinity-c0), now anon-rss:0kB, file-rss:0kB, shmem-rss:26488kB oom_reaper: reaped process 3914 (trinity-c0), now anon-rss:0kB, file-rss:0kB, shmem-rss:26900kB oom_reaper: reaped process 3914 (trinity-c0), now anon-rss:0kB, file-rss:0kB, shmem-rss:26900kB oom_reaper: reaped process 3914 (trinity-c0), now anon-rss:0kB, file-rss:0kB, shmem-rss:27296kB oom_reaper: reaped process 3914 (trinity-c0), now anon-rss:0kB, file-rss:0kB, shmem-rss:28148kB oom_reaper is trying to reap the same task again and again. This is possible only when the oom killer is bypassed because of task_will_free_mem because we skip over tasks with MMF_OOM_REAPED already set during select_bad_process. Teach task_will_free_mem to skip over MMF_OOM_REAPED tasks as well because they will be unlikely to free anything more. Analyzed by Tetsuo Handa. Link: http://lkml.kernel.org/r/1466426628-15074-9-git-send-email-mhocko@kernel.orgSigned-off-by:
-
Michal Hocko authored
task_will_free_mem is rather weak. It doesn't really tell whether the task has chance to drop its mm. 98748bd7 ("oom: consider multi-threaded tasks in task_will_free_mem") made a first step into making it more robust for multi-threaded applications so now we know that the whole process is going down and probably drop the mm. This patch builds on top for more complex scenarios where mm is shared between different processes - CLONE_VM without CLONE_SIGHAND, or in kernel use_mm(). Make sure that all processes sharing the mm are killed or exiting. This will allow us to replace try_oom_reaper by wake_oom_reaper because task_will_free_mem implies the task is reapable now. Therefore all paths which bypass the oom killer are now reapable and so they shouldn't lock up the oom killer. Link: http://lkml.kernel.org/r/1466426628-15074-8-git-send-email-mhocko@kernel.orgSigned-off-by:
-
Michal Hocko authored
Currently oom_kill_process skips both the oom reaper and SIG_KILL if a process sharing the same mm is unkillable via OOM_ADJUST_MIN. After "mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj" all such processes are sharing the same value so we shouldn't see such a task at all (oom_badness would rule them out). We can still encounter oom disabled vforked task which has to be killed as well if we want to have other tasks sharing the mm reapable because it can access the memory before doing exec. Killing such a task should be acceptable because it is highly unlikely it has done anything useful because it cannot modify any memory before it calls exec. An alternative would be to keep the task alive and skip the oom reaper and risk all the weird corner cases where the OOM killer cannot make forward progress because the oom victim hung somewhere on the way to exit. [rientjes@google.com - drop printk when OOM_SCORE_ADJ_MIN killed task the setting is inherently racy and we cannot do much about it without introducing locks in hot paths] Link: http://lkml.kernel.org/r/1466426628-15074-7-git-send-email-mhocko@kernel.orgSigned-off-by:
-
Michal Hocko authored
vforked tasks are not really sitting on any memory. They are sharing the mm with parent until they exec into a new code. Until then it is just pinning the address space. OOM killer will kill the vforked task along with its parent but we still can end up selecting vforked task when the parent wouldn't be selected. E.g. init doing vfork to launch a task or vforked being a child of oom unkillable task with an updated oom_score_adj to be killable. Add a new helper to check whether a task is in the vfork sharing memory with its parent and use it in oom_badness to skip over these tasks. Link: http://lkml.kernel.org/r/1466426628-15074-6-git-send-email-mhocko@kernel.orgSigned-off-by:
-
Michal Hocko authored
oom_score_adj is shared for the thread groups (via struct signal) but this is not sufficient to cover processes sharing mm (CLONE_VM without CLONE_SIGHAND) and so we can easily end up in a situation when some processes update their oom_score_adj and confuse the oom killer. In the worst case some of those processes might hide from the oom killer altogether via OOM_SCORE_ADJ_MIN while others are eligible. OOM killer would then pick up those eligible but won't be allowed to kill others sharing the same mm so the mm wouldn't release the mm and so the memory. It would be ideal to have the oom_score_adj per mm_struct because that is the natural entity OOM killer considers. But this will not work because some programs are doing vfork() set_oom_adj() exec() We can achieve the same though. oom_score_adj write handler can set the oom_score_adj for all processes sharing the same mm if the task is not in the middle of vfork. As a result all the processes will share the same oom_score_adj. The current implementation is rather pessimistic and checks all the existing processes by default if there is more than 1 holder of the mm but we do not have any reliable way to check for external users yet. Link: http://lkml.kernel.org/r/1466426628-15074-5-git-send-email-mhocko@kernel.orgSigned-off-by:
-
Michal Hocko authored
Currently we have two proc interfaces to set oom_score_adj. The legacy /proc/<pid>/oom_adj and /proc/<pid>/oom_score_adj which both have their specific handlers. Big part of the logic is duplicated so extract the common code into __set_oom_adj helper. Legacy knob still expects some details slightly different so make sure those are handled same way - e.g. the legacy mode ignores oom_score_adj_min and it warns about the usage. This patch shouldn't introduce any functional changes. Link: http://lkml.kernel.org/r/1466426628-15074-4-git-send-email-mhocko@kernel.orgSigned-off-by:
-
Michal Hocko authored
Oleg has pointed out that can simplify both oom_adj_{read,write} and oom_score_adj_{read,write} even further and drop the sighand lock. The main purpose of the lock was to protect p->signal from going away but this will not happen since ea6d290c ("signals: make task_struct->signal immutable/refcountable"). The other role of the lock was to synchronize different writers, especially those with CAP_SYS_RESOURCE. Introduce a mutex for this purpose. Later patches will need this lock anyway. Suggested-by: -
Michal Hocko authored
Series "Handle oom bypass more gracefully", V5 The following 10 patches should put some order to very rare cases of mm shared between processes and make the paths which bypass the oom killer oom reapable and therefore much more reliable finally. Even though mm shared outside of thread group is rare (either vforked tasks for a short period, use_mm by kernel threads or exotic thread model of clone(CLONE_VM) without CLONE_SIGHAND) it is better to cover them. Not only it makes the current oom killer logic quite hard to follow and reason about it can lead to weird corner cases. E.g. it is possible to select an oom victim which shares the mm with unkillable process or bypass the oom killer even when other processes sharing the mm are still alive and other weird cases. Patch 1 drops bogus task_lock and mm check from oom_{score_}adj_write. This can be considered a bug fix with a low impact as nobody has noticed for years. Patch 2 drops sighand lock because it is not needed anymore as pointed by Oleg. Patch 3 is a clean up of oom_score_adj handling and a preparatory work for later patches. Patch 4 enforces oom_adj_score to be consistent between processes sharing the mm to behave consistently with the regular thread groups. This can be considered a user visible behavior change because one thread group updating oom_score_adj will affect others which share the same mm via clone(CLONE_VM). I argue that this should be acceptable because we already have the same behavior for threads in the same thread group and sharing the mm without signal struct is just a different model of threading. This is probably the most controversial part of the series, I would like to find some consensus here. There were some suggestions to hook some counter/oom_score_adj into the mm_struct but I feel that this is not necessary right now and we can rely on proc handler + oom_kill_process to DTRT. I can be convinced otherwise but I strongly think that whatever we do the userspace has to have a way to see the current oom priority as consistently as possible. Patch 5 makes sure that no vforked task is selected if it is sharing the mm with oom unkillable task. Patch 6 ensures that all user tasks sharing the mm are killed which in turn makes sure that all oom victims are oom reapable. Patch 7 guarantees that task_will_free_mem will always imply reapable bypass of the oom killer. Patch 8 is new in this version and it addresses an issue pointed out by 0-day OOM report where an oom victim was reaped several times. Patch 9 puts an upper bound on how many times oom_reaper tries to reap a task and hides it from the oom killer to move on when no progress can be made. This will give an upper bound to how long an oom_reapable task can block the oom killer from selecting another victim if the oom_reaper is not able to reap the victim. Patch 10 tries to plug the (hopefully) last hole when we can still lock up when the oom victim is shared with oom unkillable tasks (kthreads and global init). We just try to be best effort in that case and rather fallback to kill something else than risk a lockup. This patch (of 10): Both oom_adj_write and oom_score_adj_write are using task_lock, check for task->mm and fail if it is NULL. This is not needed because the oom_score_adj is per signal struct so we do not need mm at all. The code has been introduced by 3d5992d2 ("oom: add per-mm oom disable count") but we do not do per-mm oom disable since c9f01245 ("oom: remove oom_disable_count"). The task->mm check is even not correct because the current thread might have exited but the thread group might be still alive - e.g. thread group leader would lead that echo $VAL > /proc/pid/oom_score_adj would always fail with EINVAL while /proc/pid/task/$other_tid/oom_score_adj would succeed. This is unexpected at best. Remove the lock along with the check to fix the unexpected behavior and also because there is not real need for the lock in the first place. Link: http://lkml.kernel.org/r/1466426628-15074-2-git-send-email-mhocko@kernel.orgSigned-off-by:Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by:
-
Linus Torvalds authored
Some of our "for_each_xyz()" macro constructs make gcc unhappy about lack of braces around if-statements inside or outside the loop, because the loop construct itself has a "if-then-else" statement inside of it. The resulting warnings look something like this: drivers/gpu/drm/i915/i915_debugfs.c: In function ‘i915_dump_lrc’: drivers/gpu/drm/i915/i915_debugfs.c:2103:6: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses] if (ctx != dev_priv->kernel_context) ^ even if the code itself is fine. Since the warning is fairly easy to avoid by adding a braces around the if-statement near the for_each_xyz() construct, do so, rather than disabling the otherwise potentially useful warning. (The if-then-else statements used in the "for_each_xyz()" constructs are designed to be inherently safe even with no braces, but in this case it's quite understandable that gcc isn't really able to tell that). This finally leaves the standard "allmodconfig" build with just a handful of remaining warnings, so new and valid warnings hopefully will stand out. Signed-off-by: -
Linus Torvalds authored
Newer versions of gcc warn about the use of __builtin_return_address() with a non-zero argument when "-Wall" is specified: kernel/trace/trace_irqsoff.c: In function ‘stop_critical_timings’: kernel/trace/trace_irqsoff.c:433:86: warning: calling ‘__builtin_return_address’ with a nonzero argument is unsafe [-Wframe-address] stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1); [ .. repeats a few times for other similar cases .. ] It is true that a non-zero argument is somewhat dangerous, and we do not actually have very many uses of that in the kernel - but the ftrace code does use it, and as Stephen Rostedt says: "We are well aware of the danger of using __builtin_return_address() of > 0. In fact that's part of the reason for having the "thunk" code in x86 (See arch/x86/entry/thunk_{64,32}.S). [..] it adds extra frames when tracking irqs off sections, to prevent __builtin_return_address() from accessing bad areas. In fact the thunk_32.S states: 'Trampoline to trace irqs off. (otherwise CALLER_ADDR1 might crash)'." For now, __builtin_return_address() with a non-zero argument is the best we can do, and the warning is not helpful and can end up making people miss other warnings for real problems. So disable the frame-address warning on compilers that need it. Acked-by:Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
- 27 Jul, 2016 23 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsiLinus Torvalds authored
Pull HSI updates from Sebastian Reichel: - proper runtime pm support for omap-ssi and ssi-protocol - misc fixes * tag 'hsi-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: (24 commits) HSI: omap_ssi: drop pm_runtime_irq_safe HSI: omap_ssi_port: use rpm autosuspend API HSI: omap_ssi: call msg->complete() from process context HSI: omap_ssi_port: ensure clocks are kept enabled during transfer HSI: omap_ssi_port: replace pm_runtime_put_sync with non-sync variant HSI: omap_ssi_port: avoid calling runtime_pm_*_sync inside spinlock HSI: omap_ssi_port: avoid pm_runtime_get_sync in ssi_start_dma and ssi_start_pio HSI: omap_ssi_port: switch to threaded pio irq HSI: omap_ssi_core: remove pm_runtime_get_sync call from tasklet HSI: omap_ssi_core: use pm_runtime_put instead of pm_runtime_put_sync HSI: omap_ssi_port: prepare start_tx/stop_tx for blocking pm_runtime calls HSI: core: switch port event notifier from atomic to blocking HSI: omap_ssi_port: replace wkin_cken with atomic bitmap operations HSI: omap_ssi: convert cawake irq handler to thread HSI: ssi_protocol: fix ssip_xmit invocation HSI: ssi_protocol: replace spin_lock with spin_lock_bh HSI: ssi_protocol: avoid ssi_waketest call with held spinlock HSI: omap_ssi: do not reset module HSI: omap_ssi_port: remove useless newline hsi: Only descend into hsi directory when CONFIG_HSI is set ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/randomLinus Torvalds authored
Pull random driver updates from Ted Ts'o: "A number of improvements for the /dev/random driver; the most important is the use of a ChaCha20-based CRNG for /dev/urandom, which is faster, more efficient, and easier to make scalable for silly/abusive userspace programs that want to read from /dev/urandom in a tight loop on NUMA systems. This set of patches also improves entropy gathering on VM's running on Microsoft Azure, and will take advantage of a hw random number generator (if present) to initialize the /dev/urandom pool" (It turns out that the random tree hadn't been in linux-next this time around, because it had been dropped earlier as being too quiet. Oh well). * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: strengthen input validation for RNDADDTOENTCNT random: add backtracking protection to the CRNG random: make /dev/urandom scalable for silly userspace programs random: replace non-blocking pool with a Chacha20-based CRNG random: properly align get_random_int_hash random: add interrupt callback to VMBus IRQ handler random: print a warning for the first ten uninitialized random users random: initialize the non-blocking pool via add_hwgenerator_randomness()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media documentation updates from Mauro Carvalho Chehab: "This patch series does the conversion of all media documentation stuff to Restrutured Text markup format and add them to the Documentation/index.rst file. The media documentation was grouped into 4 books: - media uAPI - media kAPI - V4L driver-specific documentation - DVB driver-specific documentation It also contains several documentation improvements and one fixup patch for a core issue with cropcap. PS. After this patch series, the media DocBook is deprecated and should be removed. I'll add such patch on a future pull request" * tag 'media/v4.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (322 commits) [media] cx23885-cardlist.rst: add a new card [media] doc-rst: add some needed escape codes [media] doc-rst: kapi: use :c:func: instead of :cpp:func doc-rst: kernel-doc: fix a change introduced by mistake [media] v4l2-ioctl.h add debug info for struct v4l2_ioctl_ops [media] dvb_ringbuffer.h: some documentation improvements [media] v4l2-ctrls.h: fully document the header file [media] doc-rst: Fix some typedef ugly warnings [media] doc-rst: reorganize the kAPI v4l2 chapters [media] rename v4l2-framework.rst to v4l2-intro.rst [media] move V4L2 clocks to a separate .rst file [media] v4l2-fh.rst: add cross references and markups [media] v4l2-fh.rst: add fh contents from v4l2-framework.rst [media] v4l2-fh.h: add documentation for it [media] v4l2-event.rst: add cross-references and markups [media] v4l2-event.h: document all functions [media] v4l2-event.rst: add text from v4l2-framework.rst [media] v4l2-framework.rst: remove videobuf quick chapter [media] v4l2-dev: add cross-references and improve markup [media] doc-rst: move v4l2-dev doc to a separate file ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI updates from James Bottomley: "This update includes the usual round of driver updates (fcoe, lpfc, ufs, qla2xxx, hisi_sas). The most important other change is removing the flag to allow non-blk_mq on a per host basis (it's unused); there is still a global module parameter for all of SCSI just in case. The rest are an assortment of minor fixes and typo updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (101 commits) scsi:libsas: fix oops caused by assigning a freed task to ->lldd_task fnic: pci_dma_mapping_error() doesn't return an error code scsi: lpfc: avoid harmless comparison warning fcoe: implement FIP VLAN responder fcoe: Rename 'fip_frame' to 'fip_vn2vn_notify_frame' lpfc: call lpfc_sli_validate_fcp_iocb() with the hbalock held scsi: ufs: remove unnecessary goto label hpsa: change hpsa_passthru_ioctl timeout hpsa: correct skipping masked peripherals qla2xxx: Update driver version to 8.07.00.38-k qla2xxx: Fix BBCR offset qla2xxx: Fix duplicate message id. qla2xxx: Disable the adapter and skip error recovery in case of register disconnect. qla2xxx: Separate ISP type bits out from device type. qla2xxx: Correction to function qla26xx_dport_diagnostics(). qla2xxx: Add support to handle Loop Init error Asynchronus event. qla2xxx: Let DPORT be enabled purely by nvram. qla2xxx: Add bsg interface to support statistics counter reset. qla2xxx: Add bsg interface to support D_Port Diagnostics. qla2xxx: Check for device state before unloading the driver. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: "Updates for the input subsystem. This contains the following new drivers promised in the last merge window: - driver for touchscreen controller found in Surface 3 - driver for Pegasus Notetaker tablet - driver for Atmel Captouch Buttons - driver for Raydium I2C touchscreen controllers - powerkey driver for HISI 65xx SoC plus a few fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) Input: tty/vt/keyboard - use memdup_user() Input: pegasus_notetaker - set device mode in reset_resume() if in use Input: pegasus_notetaker - cancel workqueue's work in suspend() Input: pegasus_notetaker - fix usb_autopm calls to be balanced Input: pegasus_notetaker - handle usb control msg errors Input: wacom_w8001 - handle errors from input_mt_init_slots() Input: wacom_w8001 - resolution wasn't set for ABS_MT_POSITION_X/Y Input: pixcir_ts - add support for axis inversion / swapping Input: icn8318 - use of_touchscreen helpers for inverting / swapping axes Input: edt-ft5x06 - add support for inverting / swapping axes Input: of_touchscreen - add support for inverted / swapped axes Input: synaptics-rmi4 - use the RMI_F11_REL_BYTES define in rmi_f11_rel_pos_report Input: synaptics-rmi4 - remove unneeded variable Input: synaptics-rmi4 - remove pointer to rmi_function in f12_data Input: synaptics-rmi4 - support regulator supplies Input: raydium_i2c_ts - check CRC of incoming packets Input: xen-kbdfront - prefer xenbus_write() over xenbus_printf() where possible Input: fix a double word "is is" in include/linux/input.h Input: add powerkey driver for HISI 65xx SoC Input: apanel - spelling mistake - "skiping" -> "skipping" ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "Here is the I2C pull request for 4.8: - the core and i801 driver gained support for SMBus Host Notify - core support for more than one address in DT - i2c_add_adapter() has now better error messages. We can remove all error messages from drivers calling it as a next step. - bigger updates to rk3x driver to support rk3399 SoC - the at24 eeprom driver got refactored and can now read special variants with unique serials or fixed MAC addresses. The rest is regular driver updates and bugfixes" * 'i2c/for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (66 commits) i2c: i801: use IS_ENABLED() instead of checking for built-in or module Documentation: i2c: slave: give proper example for pm usage Documentation: i2c: slave: describe buffer problems a bit better i2c: bcm2835: Don't complain on -EPROBE_DEFER from getting our clock i2c: i2c-smbus: drop useless stubs i2c: efm32: fix a failure path in efm32_i2c_probe() Revert "i2c: core: Cleanup I2C ACPI namespace" Revert "i2c: core: Add function for finding the bus speed from ACPI" i2c: Update the description of I2C_SMBUS i2c: i2c-smbus: fix i2c_handle_smbus_host_notify documentation eeprom: at24: tweak the loop_until_timeout() macro eeprom: at24: add support for at24mac series eeprom: at24: support reading the serial number for 24csxx eeprom: at24: platform_data: use BIT() macro eeprom: at24: split at24_eeprom_write() into specialized functions eeprom: at24: split at24_eeprom_read() into specialized functions eeprom: at24: hide the read/write loop behind a macro eeprom: at24: call read/write functions via function pointers eeprom: at24: coding style fixes eeprom: at24: move at24_read() below at24_eeprom_write() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi updates from Mark Brown: "Quite a lot of cleanup and maintainence work going on this release in various drivers, and also a fix for a nasty locking issue in the core: - A fix for locking issues when external drivers explicitly locked the bus with spi_bus_lock() - we were using the same lock to both control access to the physical bus in multi-threaded I/O operations and exclude multiple callers. Confusion between these two caused us to have scenarios where we were dropping locks. These are fixed by splitting into two separate locks like should have been done originally, making everything much clearer and correct. - Support for DMA in spi_flash_read(). - Support for instantiating spidev on ACPI systems, including some test devices used in Windows validation. - Use of the core DMA mapping functionality in the McSPI driver. - Start of support for ThunderX SPI controllers, involving a very big set of changes to the Cavium driver. - Support for Braswell, Exynos 5433, Kaby Lake, Merrifield, RK3036, RK3228, RK3368 controllers" * tag 'spi-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (64 commits) spi: Split bus and I/O locking spi: octeon: Split driver into Octeon specific and common parts spi: octeon: Move include file from arch/mips to drivers/spi spi: octeon: Put register offsets into a struct spi: octeon: Store system clock freqency in struct octeon_spi spi: octeon: Convert driver to use readq()/writeq() functions spi: pic32-sqi: fixup wait_for_completion_timeout return handling spi: pic32: fixup wait_for_completion_timeout return handling spi: rockchip: limit transfers to (64K - 1) bytes spi: xilinx: Return IRQ_NONE if no interrupts were detected spi: xilinx: Handle errors from platform_get_irq() spi: s3c64xx: restore removed comments spi: s3c64xx: add Exynos5433 compatible for ioclk handling spi: s3c64xx: use error code from clk_prepare_enable() spi: s3c64xx: rename goto labels to meaningful names spi: s3c64xx: document the clocks and the clock-name property spi: s3c64xx: add exynos5433 spi compatible spi: s3c64xx: fix reference leak to master in s3c64xx_spi_remove() spi: spi-sh: Remove deprecated create_singlethread_workqueue spi: spi-topcliff-pch: Remove deprecated create_singlethread_workqueue ... -
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-ledsLinus Torvalds authored
Pull LED updates from Jacek Anaszewski: "New LED class driver: - LED driver for TI LP3952 6-Channel Color LED LED core improvements: - Only descend into leds directory when CONFIG_NEW_LEDS is set - Add no-op gpio_led_register_device when LED subsystem is disabled - MAINTAINERS: Add file patterns for led device tree bindings LED Trigger core improvements: - return error if invalid trigger name is provided via sysfs LED class drivers improvements - is31fl32xx: define complete i2c_device_id table - is31fl32xx: fix typo in id and match table names - leds-gpio: Set of_node for created LED devices - pca9532: Add device tree support Conversion of IDE trigger to common disk trigger: - leds: convert IDE trigger to common disk trigger - leds: documentation: 'ide-disk' to 'disk-activity' - unicore32: use the new LED disk activity trigger - parisc: use the new LED disk activity trigger - mips: use the new LED disk activity trigger - arm: use the new LED disk activity trigger - powerpc: use the new LED disk activity trigger" * tag 'leds_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: is31fl32xx: define complete i2c_device_id table leds: is31fl32xx: fix typo in id and match table names leds: LED driver for TI LP3952 6-Channel Color LED leds: leds-gpio: Set of_node for created LED devices leds: triggers: return error if invalid trigger name is provided via sysfs leds: Only descend into leds directory when CONFIG_NEW_LEDS is set leds: Add no-op gpio_led_register_device when LED subsystem is disabled unicore32: use the new LED disk activity trigger parisc: use the new LED disk activity trigger mips: use the new LED disk activity trigger arm: use the new LED disk activity trigger powerpc: use the new LED disk activity trigger leds: documentation: 'ide-disk' to 'disk-activity' leds: convert IDE trigger to common disk trigger leds: pca9532: Add device tree support MAINTAINERS: Add file patterns for led device tree bindings
-
git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds authored
Pull IPMI updates from Corey Minyard: "Remove some old cruft that was disabled by default a long time ago. No modern hardware should need this, and anybody who really doesn't have something to automatically detect IPMI can add the device by hand on the module commandline or hot add it" * tag 'for-linus-4.8' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: remove trydefaults parameter and default init
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
Pull EDAC updates from Borislav Petkov: "This last cycle, Thor was busy adding Arria10 eth FIFO support to the altera_edac driver along with other improvements. We have two cleanups/fixes too. Summary: - Altera Arria10 ethernet FIFO buffer support (Thor Thayer) - Minor cleanups" * tag 'edac_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: ARM: dts: Add Arria10 Ethernet EDAC devicetree entry EDAC, altera: Add Arria10 Ethernet EDAC support EDAC, altera: Add Arria10 ECC memory init functions Documentation: dt: socfpga: Add Arria10 Ethernet binding EDAC, altera: Drop some ifdeffery EDAC, altera: Add panic flag check to A10 IRQ EDAC, altera: Check parent status for Arria10 EDAC block EDAC, altera: Make all private data structures static EDAC: Correct channel count limit EDAC, amd64_edac: Init opstate at the proper time during init EDAC, altera: Handle Arria10 SDRAM child node EDAC, altera: Add ECC Manager IRQ controller support Documentation: dt: socfpga: Add interrupt-controller to ecc-manager
-
Linus Torvalds authored
Several build configurations had already disabled this warning because it generates a lot of false positives. But some had not, and it was still enabled for "allmodconfig" builds, for example. Looking at the warnings produced, every single one I looked at was a false positive, and the warnings are frequent enough (and big enough) that they can easily hide real problems that you don't notice in the noise generated by -Wmaybe-uninitialized. The warning is good in theory, but this is a classic case of a warning that causes more problems than the warning can solve. If gcc gets better at avoiding false positives, we may be able to re-enable this warning. But as is, we're better off without it, and I want to be able to see the *real* warnings. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds authored
Pull networking updates from David Miller: 1) Unified UDP encapsulation offload methods for drivers, from Alexander Duyck. 2) Make DSA binding more sane, from Andrew Lunn. 3) Support QCA9888 chips in ath10k, from Anilkumar Kolli. 4) Several workqueue usage cleanups, from Bhaktipriya Shridhar. 5) Add XDP (eXpress Data Path), essentially running BPF programs on RX packets as soon as the device sees them, with the option to mirror the packet on TX via the same interface. From Brenden Blanco and others. 6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet. 7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli. 8) Simplify netlink conntrack entry layout, from Florian Westphal. 9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido Schimmel, Yotam Gigi, and Jiri Pirko. 10) Add SKB array infrastructure and convert tun and macvtap over to it. From Michael S Tsirkin and Jason Wang. 11) Support qdisc packet injection in pktgen, from John Fastabend. 12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy. 13) Add NV congestion control support to TCP, from Lawrence Brakmo. 14) Add GSO support to SCTP, from Marcelo Ricardo Leitner. 15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni. 16) Support MPLS over IPV4, from Simon Horman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits) xgene: Fix build warning with ACPI disabled. be2net: perform temperature query in adapter regardless of its interface state l2tp: Correctly return -EBADF from pppol2tp_getname. net/mlx5_core/health: Remove deprecated create_singlethread_workqueue net: ipmr/ip6mr: update lastuse on entry change macsec: ensure rx_sa is set when validation is disabled tipc: dump monitor attributes tipc: add a function to get the bearer name tipc: get monitor threshold for the cluster tipc: make cluster size threshold for monitoring configurable tipc: introduce constants for tipc address validation net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update() MAINTAINERS: xgene: Add driver and documentation path Documentation: dtb: xgene: Add MDIO node dtb: xgene: Add MDIO node drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset drivers: net: xgene: Use exported functions drivers: net: xgene: Enable MDIO driver drivers: net: xgene: Add backward compatibility drivers: net: phy: xgene: Add MDIO driver ... -
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen updates from David Vrabel: "Features and fixes for 4.8-rc0: - ACPI support for guests on ARM platforms. - Generic steal time support for arm and x86. - Support cases where kernel cpu is not Xen VCPU number (e.g., if in-guest kexec is used). - Use the system workqueue instead of a custom workqueue in various places" * tag 'for-linus-4.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (47 commits) xen: add static initialization of steal_clock op to xen_time_ops xen/pvhvm: run xen_vcpu_setup() for the boot CPU xen/evtchn: use xen_vcpu_id mapping xen/events: fifo: use xen_vcpu_id mapping xen/events: use xen_vcpu_id mapping in events_base x86/xen: use xen_vcpu_id mapping when pointing vcpu_info to shared_info x86/xen: use xen_vcpu_id mapping for HYPERVISOR_vcpu_op xen: introduce xen_vcpu_id mapping x86/acpi: store ACPI ids from MADT for future usage x86/xen: update cpuid.h from Xen-4.7 xen/evtchn: add IOCTL_EVTCHN_RESTRICT xen-blkback: really don't leak mode property xen-blkback: constify instance of "struct attribute_group" xen-blkfront: prefer xenbus_scanf() over xenbus_gather() xen-blkback: prefer xenbus_scanf() over xenbus_gather() xen: support runqueue steal time on xen arm/xen: add support for vm_assist hypercall xen: update xen headers xen-pciback: drop superfluous variables xen-pciback: short-circuit read path used for merging write values ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 updates from Catalin Marinas: - Kexec support for arm64 - Kprobes support - Expose MIDR_EL1 and REVIDR_EL1 CPU identification registers to sysfs - Trapping of user space cache maintenance operations and emulation in the kernel (CPU errata workaround) - Clean-up of the early page tables creation (kernel linear mapping, EFI run-time maps) to avoid splitting larger blocks (e.g. pmds) into smaller ones (e.g. ptes) - VDSO support for CLOCK_MONOTONIC_RAW in clock_gettime() - ARCH_HAS_KCOV enabled for arm64 - Optimise IP checksum helpers - SWIOTLB optimisation to only allocate/initialise the buffer if the available RAM is beyond the 32-bit mask - Properly handle the "nosmp" command line argument - Fix for the initialisation of the CPU debug state during early boot - vdso-offsets.h build dependency workaround - Build fix when RANDOMIZE_BASE is enabled with MODULES off * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits) arm64: arm: Fix-up the removal of the arm64 regs_query_register_name() prototype arm64: Only select ARM64_MODULE_PLTS if MODULES=y arm64: mm: run pgtable_page_ctor() on non-swapper translation table pages arm64: mm: make create_mapping_late() non-allocating arm64: Honor nosmp kernel command line option arm64: Fix incorrect per-cpu usage for boot CPU arm64: kprobes: Add KASAN instrumentation around stack accesses arm64: kprobes: Cleanup jprobe_return arm64: kprobes: Fix overflow when saving stack arm64: kprobes: WARN if attempting to step with PSTATE.D=1 arm64: debug: remove unused local_dbg_{enable, disable} macros arm64: debug: remove redundant spsr manipulation arm64: debug: unmask PSTATE.D earlier arm64: localise Image objcopy flags arm64: ptrace: remove extra define for CPSR's E bit kprobes: Add arm64 case in kprobe example module arm64: Add kernel return probes support (kretprobes) arm64: Add trampoline code for kretprobes arm64: kprobes instruction simulation support arm64: Treat all entry code as non-kprobe-able ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
Pull tile architecture updates from Chris Metcalf: "A few stray changes" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO tile: support gcc 7 optimization to use __multi3 tile 32-bit big-endian: fix bugs in syscall argument order tile: allow disabling CONFIG_EARLY_PRINTK
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlmLinus Torvalds authored
Pull dlm updates from David Teigland: "This set includes two trivial changes, one to use kmemdup and another to control the log level of recovery messages" * tag 'dlm-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: Use kmemdup instead of kmalloc and memcpy dlm: add log_info config option
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs updates from Jaegeuk Kim: "The major change in this version is mitigating cpu overheads on write paths by replacing redundant inode page updates with mark_inode_dirty calls. And we tried to reduce lock contentions as well to improve filesystem scalability. Other feature is setting F2FS automatically when detecting host-managed SMR. Enhancements: - ioctl to move a range of data between files - inject orphan inode errors - avoid flush commands congestion - support lazytime Bug fixes: - return proper results for some dentry operations - fix deadlock in add_link failure - disable extent_cache for fcollapse/finsert" * tag 'for-f2fs-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (68 commits) f2fs: clean up coding style and redundancy f2fs: get victim segment again after new cp f2fs: handle error case with f2fs_bug_on f2fs: avoid data race when deciding checkpoin in f2fs_sync_file f2fs: support an ioctl to move a range of data blocks f2fs: fix to report error number of f2fs_find_entry f2fs: avoid memory allocation failure due to a long length f2fs: reset default idle interval value f2fs: use blk_plug in all the possible paths f2fs: fix to avoid data update racing between GC and DIO f2fs: add maximum prefree segments f2fs: disable extent_cache for fcollapse/finsert inodes f2fs: refactor __exchange_data_block for speed up f2fs: fix ERR_PTR returned by bio f2fs: avoid mark_inode_dirty f2fs: move i_size_write in f2fs_write_end f2fs: fix to avoid redundant discard during fstrim f2fs: avoid mismatching block range for discard f2fs: fix incorrect f_bfree calculation in ->statfs f2fs: use percpu_rw_semaphore ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfsLinus Torvalds authored
Pull xfs updates from Dave Chinner: "The major addition is the new iomap based block mapping infrastructure. We've been kicking this about locally for years, but there are other filesystems want to use it too (e.g. gfs2). Now it is fully working, reviewed and ready for merge and be used by other filesystems. There are a lot of other fixes and cleanups in the tree, but those are XFS internal things and none are of the scale or visibility of the iomap changes. See below for details. I am likely to send another pull request next week - we're just about ready to merge some new functionality (on disk block->owner reverse mapping infrastructure), but that's a huge chunk of code (74 files changed, 7283 insertions(+), 1114 deletions(-)) so I'm keeping that separate to all the "normal" pull request changes so they don't get lost in the noise. Summary of changes in this update: - generic iomap based IO path infrastructure - generic iomap based fiemap implementation - xfs iomap based Io path implementation - buffer error handling fixes - tracking of in flight buffer IO for unmount serialisation - direct IO and DAX io path separation and simplification - shortform directory format definition changes for wider platform compatibility - various buffer cache fixes - cleanups in preparation for rmap merge - error injection cleanups and fixes - log item format buffer memory allocation restructuring to prevent rare OOM reclaim deadlocks - sparse inode chunks are now fully supported" * tag 'xfs-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (53 commits) xfs: remove EXPERIMENTAL tag from sparse inode feature xfs: bufferhead chains are invalid after end_page_writeback xfs: allocate log vector buffers outside CIL context lock libxfs: directory node splitting does not have an extra block xfs: remove dax code from object file when disabled xfs: skip dirty pages in ->releasepage() xfs: remove __arch_pack xfs: kill xfs_dir2_inou_t xfs: kill xfs_dir2_sf_off_t xfs: split direct I/O and DAX path xfs: direct calls in the direct I/O path xfs: stop using generic_file_read_iter for direct I/O xfs: split xfs_file_read_iter into buffered and direct I/O helpers xfs: remove s_maxbytes enforcement in xfs_file_read_iter xfs: kill ioflags xfs: don't pass ioflags around in the ioctl path xfs: track and serialize in-flight async buffers against unmount xfs: exclude never-released buffers from buftarg I/O accounting xfs: don't reset b_retries to 0 on every failure xfs: remove extraneous buffer flag changes ... -
Tony Camuso authored
Parameter trydefaults=1 causes the ipmi_init to initialize ipmi through the legacy port io space that was designated for ipmi. Architectures that do not map legacy port io can panic when trydefaults=1. Rather than implement build-time conditional exceptions for each architecture that does not map legacy port io, we have removed legacy port io from the driver. Parameter 'trydefaults' has been removed. Attempts to use it hereafter will evoke the "Unknown symbol in module, or unknown parameter" message. The patch was built against a number of architectures and tested for regressions and functionality on x86_64 and ARM64. Signed-off-by:
Tony Camuso <tcamuso@redhat.com> Removed the config entry and the address source entry for default, since neither were used any more. Signed-off-by:
Corey Minyard <cminyard@mvista.com>
-
Mauro Carvalho Chehab authored
* topic/docs-next: (322 commits) [media] cx23885-cardlist.rst: add a new card [media] doc-rst: add some needed escape codes [media] doc-rst: kapi: use :c:func: instead of :cpp:func doc-rst: kernel-doc: fix a change introduced by mistake [media] v4l2-ioctl.h add debug info for struct v4l2_ioctl_ops [media] dvb_ringbuffer.h: some documentation improvements [media] v4l2-ctrls.h: fully document the header file [media] doc-rst: Fix some typedef ugly warnings [media] doc-rst: reorganize the kAPI v4l2 chapters [media] rename v4l2-framework.rst to v4l2-intro.rst [media] move V4L2 clocks to a separate .rst file [media] v4l2-fh.rst: add cross references and markups [media] v4l2-fh.rst: add fh contents from v4l2-framework.rst [media] v4l2-fh.h: add documentation for it [media] v4l2-event.rst: add cross-references and markups [media] v4l2-event.h: document all functions [media] v4l2-event.rst: add text from v4l2-framework.rst [media] v4l2-framework.rst: remove videobuf quick chapter [media] v4l2-dev: add cross-references and improve markup [media] doc-rst: move v4l2-dev doc to a separate file ...
-
Catalin Marinas authored
Commit 0a8ea52c ("arm64: Add HAVE_REGS_AND_STACK_ACCESS_API feature") inadvertently removed the arch/arm prototype instead of the arm64 one introduced by the original patch. There should not be any bisection issues since this function is not called from anywhere else (it could as well be removed from arch/arm at some point). Fixes: 0a8ea52c ("arm64: Add HAVE_REGS_AND_STACK_ACCESS_API feature") Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com>
-
David S. Miller authored
drivers/net/ethernet/apm/xgene/xgene_enet_hw.c: In function 'xgene_enet_phy_connect': drivers/net/ethernet/apm/xgene/xgene_enet_hw.c:759:22: warning: unused variable 'adev' [-Wunused-variable] Fixes: 8089a96f ("drivers: net: xgene: Add backward compatibility") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guilherme G. Piccoli authored
The be2net driver performs fw temperature queries on be_worker() routine, which is executed each second for each be_adapter. There is a frequency threshold to avoid fw query to happens at each call to be_worker(); instead, currently a fw query occurs once in 64 runs of the procedure. Nevertheless, this fw temperature query is invoked only for adapters which interface is up, so we can see I/O errors on read of hwmon counters from userspace (from tools like lm-sensors) in case we have adapters' functions which interface is down. This patch moves the fw query code to be invoked even if interface is down. No functional changes were introduced. Signed-off-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by:
Sathya Perla <sathya.perla@broadcom.com> Signed-off-by:
-
