- 08 Jun, 2005 15 commits
-
-
Keith Owens authored
break.b does not store the break number in cr.iim, instead it stores 0, which makes all break.b instructions look like BUG(). Extract the break number from the instruction itself. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Tony Luck authored
Christian Hildner pointed out that the comment did not match what the code does in cpu_init() when we set up the default control register. Patch based on suggestions from Ken Chen. Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Keith Owens authored
Some bits of the kernel assume that gp always points to valid memory, in particular PHYSICAL_MODE_ENTER() assumes that both gp and sp are valid virtual addresses with associated physical pages. The IA64 module loader puts gp well past the end of the module, with no physical backing. Offsets on gp are still valid, but physical mode addressing breaks for modules. Ensure that gp always falls within the module body. Also ensure that gp is 8 byte aligned. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Russell King authored
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Pitre authored
Patch from Nicolas Pitre Not that there might be many of them on the planet, but at least RMK apparently has one. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Pitre authored
Patch from Nicolas Pitre Signed-off-by: Nicolas Pitre Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Giorgio Padrin authored
Patch from Giorgio Padrin The patch completes I2S GPIO alternate functions for PXA27x, adding I2S_SYSCLK. File: pxa-regs.h . Signed-off-by: Giorgio Padrin Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
David Mosberger-Tang authored
This fixes an oops reported by Jason Baron. Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Ananth N Mavinakayanahalli authored
Kprobes was eating the hardware instruction and data address breakpoint exceptions. This patch fixes it; kprobes doesn't use those exceptions at all and should ignore them. Signed-off-by: Ananth N Mavinakayanahalli <amavin@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Olaf Hering authored
if num has a value of -1, accessing the digits[] array will fail and the format string will be printed in funny way, or not at all. This happens if one prints negative numbers. Just change the code to match lib/vsprintf.c asm/div64.h cant be used because u64 maps to u32 for this build. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linus Torvalds authored
-
Russell King authored
The ARM copypage changes in 2.6.12-rc4-git1 removed the preempt locking from the copypage functions which broke the XScale implementation. This patch fixes the locking on XScale and removes the now unneeded minicache code. Signed-off-by: Russell King <rmk@arm.linux.org.uk> Checked-by: Richard Purdie
- 07 Jun, 2005 13 commits
-
-
Trond Myklebust authored
We should never apply a lookup intent to anything other than the last path component in an open(), create() or access() call. Introduce the helper nfs_lookup_check_intent() which always returns zero if LOOKUP_CONTINUE or LOOKUP_PARENT are set, and returns the intent flags if we're on the last component of the lookup. By doing so, we fix a bug in open(O_EXCL), where we may end up optimizing away a real lookup of the parent directory. Problem noticed by Linda Dunaphant <linda.dunaphant@ccur.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Bjorn Helgaas authored
At least some VIA chipsets require the fixup even in IO-APIC mode. This was found and debugged with the patient assistance of Stian Jordet <liste@jordet.nu> on an Asus CUV266-DLS motherboard. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Vojtech Pavlik authored
This patch disables the scroll feature on AT keyboards by default, because it causes the numbers of mouse devices to shift, breaking user setups. Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Eugene Surovegin authored
Add a definition for PPC 405EP which was lost somehow during 2.4 -> 2.6 transition. Recent change to arch/ppc/kernel/misc.S ("Fix incorrect CPU_FTR fixup usage for unified caches") triggered this bug and 405EP boards don't boot anymore. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Matthew Dobson authored
In file included from arch/i386/kernel/smp.c:235: include/asm-i386/mach-numaq/mach_ipi.h:4: warning: `send_IPI_mask_sequence' declared inline after its definition Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
David Mosberger authored
[AGPGART] Replace check_bridge_mode() with (bridge->mode & AGSTAT_MODE_3_0). As mentioned earlier, the current check_bridge_mode() code assumes that AGP bridges are PCI devices. This isn't always true. Definitely not for HP zx1 chipset and the same seems to be the case for SGI's AGP bridge. The patch below fixes the problem by picking up the AGP_MODE_3_0 bit from bridge->mode. I feel like I may be missing something, since I can't see any reason why check_bridge_mode() wasn't doing that in the first place. According to the AGP 3.0 specs, the AGP_MODE_3_0 bit is determined during the hardware reset and cannot be changed, so it seems to me it should be safe to pick it up from bridge->mode. With the patch applied, I can definitely use AGP acceleration both with AGP 2.0 and AGP 3.0 (one with an Nvidia card, the other with an ATI FireGL card). Unless someone spots a problem, please apply this patch so 3d acceleration can work on zx1 boxes again. This makes AGP work again on machines with an AGP bridge that isn't a PCI device. Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com> Signed-off-by: Dave Jones <davej@redhat.com>
-
Keir Fraser authored
When Linux is running on the Xen virtual machine monitor, physical addresses are virtualised and cannot be directly referenced by the AGP GART. This patch fixes the GART driver for Xen by adding a layer of abstraction between physical addresses and 'GART addresses'. Architecture-specific functions are also defined for allocating and freeing the GATT. Xen requires this to ensure that table really is contiguous from the point of view of the GART. These extra interface functions are defined as 'no-ops' for all existing architectures that use the GART driver. Signed-off-by: Keir Fraser <keir@xensource.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dave Jones <davej@redhat.com>
-
Michael Werner authored
[PATCH] sgi-agp: fixes a problem with accessing GART memory in sgi_tioca_insert_memory and sgi_tioca_remove_memory This patch fixes a problem with accessing GART memory in sgi_tioca_insert_memory and sgi_tioca_remove_memory. sgi-agp.c | 12 +++++++++--- 1 files changed, 9 insertions(+), 3 deletions(-) Signed-off-by: Mike Werner <werner@sgi.com> Signed-off-by: Dave Jones <davej@redhat.com>
-
Alan Hourihane authored
Attached is a small patch for i945G support against 2.6.11.11. From: Alan Hourihane <alanh@fairlite.demon.co.uk> Signed-off-by: Dave Jones <davej@redhat.com>
-
Tony Luck authored
-
David Mosberger authored
I'm not sure why this issue is suddenly showing, but without this patchlet, the zx1 config won't compile anymore (e.g., to see the compilation-error, look for "***" in [1]). [1] http://www.gelato.unsw.edu.au/kerncomp/results//2005-06-06-17-00/zx1_defconfig-log.htmlSigned-off-by: David Mosberger-Tang <davidm@hpl.hp.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Tom Rini authored
On ppc32, <asm/sigcontext.h> uses __user, but doesn't directly include <linux/compiler.h>. This adds that in. Without this, glibc will not compile. Signed-off-by: Tom Rini <trini@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 06 Jun, 2005 12 commits
-
-
Tony Luck authored
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
On some 5701 devices with older bootcode, the LED configuration bits in SRAM may be invalid with value zero. The fix is to check for invalid bits (0) and default to PHY 1 mode. Incorrect LED mode will lead to error in programming the PHY. Thanks to Grant Grundler for debugging the problem. >From Grant: | In May, 2004, tg3 v3.4 changed how MAC_LED_CTRL (0x40c) was getting | programmed and how to determine what to program into LED_CTRL. The new | code trusted NIC_SRAM_DATA_CFG (0x00000b58) to indicate what to write | to LED_CTRL and MII EXT_CTRL registers. On "IOX Core Lan", SRAM was | saying MODE_MAC (0x0) and that doesn't work. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John W. Linville authored
Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
It was checking the "GET" function pointer instead of the "SET" one. Looks like a cut&paste error :-) Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yoshinori Sato authored
Make sure that binfmt_flat passes the correct flags into do_mmap(). nommu's validate_mmap_request() will simple return -EINVAL if we try and pass it a flags value of zero. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
__do_follow_link() passes potentially worng vfsmount to touch_atime(). It matters only in (currently impossible) case of symlink mounted on something, but it's trivial to fix and that actually makes more sense. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
Cosmetical cleanups - __follow_mount() calls in __link_path_walk() absorbed into do_lookup(). Obviously equivalent transformation. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
follow_mount() made void, reordered dput()/mntput() in it. follow_dotdot() switched from struct vfmount ** + struct dentry ** to struct nameidata *; callers updated. Equivalent transformation + fix for too-early-mntput() race. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>