- 26 Feb, 2019 17 commits
-
-
Eric Dumazet authored
This helper is only used from tcp_add_write_queue_tail(), and does not make the code more readable. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
This helper is used only once, and its name is no longer relevant. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Buslov authored
Comment in tdc_config.py recommends putting customizations in tdc_config_local.py file that wasn't included in gitignore. Add the local config file to gitignore. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Buslov authored
Function walker_check_empty() incorrectly verifies that tp pointer is not NULL, instead of actual filter pointer. Fix conditional to check the right pointer. Adjust filter pointer naming accordingly to other cls API functions. Fixes: 6676d5e4 ("net: sched: set dedicated tcf_walker flag when tp is empty") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leslie Monis authored
Fix the incorrect reference link to RFC 8033 Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function 'mlxsw_sp_port_get_link_ksettings': drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3062:5: warning: variable 'autoneg_status' set but not used [-Wunused-but-set-variable] It's not used since commit 475b33cb ("mlxsw: spectrum: Remove unsupported eth_proto_lp_advertise field in PTYS") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Roopa Prabhu says: ==================== vxlan: create and changelink extack support This series adds extack support to changelink paths. In the process re-factors flag sets to a separate helper. Also adds some changelink testcases to rtnetlink.sh (This series was initially part of another series that tried to support changelink for more attributes. But after some feedback from sabrina, i have dropped the 'support changelink for more attributes' part because some of them cannot be supported today or may require additional use-case handling code. These can be done separately as and when we see the need for it.) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
This patch extends rtnetlink.sh to cover some vxlan flag netlink attribute sets. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
This patch adds extack coverage in vxlan link create and changelink paths. Introduces a new helper vxlan_nl2flags to consolidate flag attribute validation. thanks to Johannes Berg for some tips to construct the generic vxlan flag extack strings. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== devlink: make ethtool compat reliable This is a follow up to the series which added device flash updates via devlink. I went with the approach of adding a new NDO in the end. It seems to end up looking cleaner. First patch removes the option to build devlink as a module. Users can still decide to not build it, but the module option ends up not being worth the maintenance cost. Next two patches add a NDO which can be used to ask the driver to return a devlink instance associated with a given netdev, instead of iterating over devlink ports. Drivers which implement this NDO must take into account the potential impact on the visibility of the devlink instance. With the new NDO in place we can remove NFP ethtool flash update code. Fifth patch makes sure we hold a reference to dev while callbacks are active. Last but not least the NULL-check of devlink->ops is moved to instance allocation time. Last but not least missing checks for devlink->ops are added. There is currently no driver registering devlink without ops, so can just fix this in -next. v2 (Michal): add netdev_to_devlink() in patch 3. v3 (Florian): - add missing checks for devlink->ops; - move locking/holding into devlink_compat_ functions. v4 (Jiri): - hold devlink_mutex around callbacks (patch 2); - require non-NULL ops (patch 6). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Commit 76726ccb ("devlink: add flash update command") and commit 2d8dc5bb ("devlink: Add support for reload") access devlink ops without NULL-checking. There is, however, no driver which would pass in NULL ops, so let's just make that a requirement. Remove the now unnecessary NULL-checking. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
When ethtool is calling into devlink compat code make sure we have a reference on the netdevice on which the operation was invoked. v3: move the hold/lock logic into devlink_compat_* functions (Florian) Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Now that devlink fallback will be called reliably, we can remove the ethtool flashing code. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Support getting devlink instance from a new NDO. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Instead of iterating over all devlink ports add a NDO which will return the devlink instance from the driver. v2: add the netdev_to_devlink() helper (Michal) v3: check that devlink has ops (Florian) v4: hold devlink_mutex (Jiri) Suggested-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Being able to build devlink as a module causes growing pains. First all drivers had to add a meta dependency to make sure they are not built in when devlink is built as a module. Now we are struggling to invoke ethtool compat code reliably. Make devlink code built-in, users can still not build it at all but the dynamically loadable module option is removed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Oskolkov authored
Now that all users of struct inet_frag_queue have been converted to use 'rb_fragments', remove the unused 'fragments' field. Build with `make allyesconfig` succeeded. ip_defrag selftest passed. Signed-off-by: Peter Oskolkov <posk@google.com> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 Feb, 2019 23 commits
-
-
Yang Wei authored
dev_consume_skb_irq() should be called in z8530_tx_done() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yang Wei authored
dev_consume_skb_irq() should be called in cosa_net_tx_done() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yang Wei authored
dev_consume_skb_irq() should be called in send_complete() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yang Wei authored
dev_consume_skb_irq() should be called in hss_hdlc_txdone_irq() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yang Wei authored
dev_consume_skb_irq() should be called in wanxl_tx_intr() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yang Wei authored
dev_consume_skb_irq() should be called in lmc_interrupt() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Delete a redundant comment line in lmc_interrupt(). Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Leslie Monis says: ==================== net: sched: pie: align PIE implementation with RFC 8033 The current implementation of the PIE queuing discipline is according to the IETF draft [http://tools.ietf.org/html/draft-pan-aqm-pie-00] and the paper [PIE: A Lightweight Control Scheme to Address the Bufferbloat Problem]. However, a lot of necessary modifications and enhancements have been proposed in RFC 8033, which have not yet been incorporated in the source code of Linux. This patch series helps in achieving the same. Performance tests carried out using Flent [https://flent.org/] Changes from v2 to v3: - Used div_u64() instead of direct division after explicit type casting as recommended by David Changes from v1 to v2: - Excluded the patch setting PIE dynamically active/inactive as the test results were unsatisfactory - Fixed a scaling issue when adding more auto-tuning cases which caused local variables to underflow - Changed the long if/else chain to a loop as suggested by Stephen - Changed the position of the accu_prob variable in the pie_vars structure as recommended by Stephen ==================== Acked-by: Dave Taht <dave.taht@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mohit P. Tahiliani authored
RFC 8033 replaces the IETF draft for PIE Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in> Signed-off-by: Dhaval Khandla <dhavaljkhandla26@gmail.com> Signed-off-by: Hrishikesh Hiraskar <hrishihiraskar@gmail.com> Signed-off-by: Manish Kumar B <bmanish15597@gmail.com> Signed-off-by: Sachin D. Patil <sdp.sachin@gmail.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Acked-by: Dave Taht <dave.taht@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mohit P. Tahiliani authored
Random dropping of packets to achieve latency control may introduce outlier situations where packets are dropped too close to each other or too far from each other. This can cause the real drop percentage to temporarily deviate from the intended drop probability. In certain scenarios, such as a small number of simultaneous TCP flows, these deviations can cause significant deviations in link utilization and queuing latency. RFC 8033 suggests using a derandomization mechanism to avoid these deviations. Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in> Signed-off-by: Dhaval Khandla <dhavaljkhandla26@gmail.com> Signed-off-by: Hrishikesh Hiraskar <hrishihiraskar@gmail.com> Signed-off-by: Manish Kumar B <bmanish15597@gmail.com> Signed-off-by: Sachin D. Patil <sdp.sachin@gmail.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Acked-by: Dave Taht <dave.taht@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mohit P. Tahiliani authored
The current implementation scales the local alpha and beta variables in the calculate_probability function by the same amount for all values of drop probability below 1%. RFC 8033 suggests using additional cases for auto-tuning alpha and beta when the drop probability is less than 1%. In order to add more auto-tuning cases, MAX_PROB must be scaled by u64 instead of u32 to prevent underflow when scaling the local alpha and beta variables in the calculate_probability function. Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in> Signed-off-by: Dhaval Khandla <dhavaljkhandla26@gmail.com> Signed-off-by: Hrishikesh Hiraskar <hrishihiraskar@gmail.com> Signed-off-by: Manish Kumar B <bmanish15597@gmail.com> Signed-off-by: Sachin D. Patil <sdp.sachin@gmail.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Acked-by: Dave Taht <dave.taht@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mohit P. Tahiliani authored
RFC 8033 suggests an initial value of 150 milliseconds for the maximum time allowed for a burst of packets. Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in> Signed-off-by: Dhaval Khandla <dhavaljkhandla26@gmail.com> Signed-off-by: Hrishikesh Hiraskar <hrishihiraskar@gmail.com> Signed-off-by: Manish Kumar B <bmanish15597@gmail.com> Signed-off-by: Sachin D. Patil <sdp.sachin@gmail.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Acked-by: Dave Taht <dave.taht@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mohit P. Tahiliani authored
RFC 8033 suggests a default value of 15 milliseconds for the update interval. Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in> Signed-off-by: Dhaval Khandla <dhavaljkhandla26@gmail.com> Signed-off-by: Hrishikesh Hiraskar <hrishihiraskar@gmail.com> Signed-off-by: Manish Kumar B <bmanish15597@gmail.com> Signed-off-by: Sachin D. Patil <sdp.sachin@gmail.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Acked-by: Dave Taht <dave.taht@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mohit P. Tahiliani authored
RFC 8033 suggests a default value of 15 milliseconds for the target queue delay. Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in> Signed-off-by: Dhaval Khandla <dhavaljkhandla26@gmail.com> Signed-off-by: Hrishikesh Hiraskar <hrishihiraskar@gmail.com> Signed-off-by: Manish Kumar B <bmanish15597@gmail.com> Signed-off-by: Sachin D. Patil <sdp.sachin@gmail.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Acked-by: Dave Taht <dave.taht@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mohit P. Tahiliani authored
RFC 8033 recommends a value of 16384 bytes for the queue threshold. Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in> Signed-off-by: Dhaval Khandla <dhavaljkhandla26@gmail.com> Signed-off-by: Hrishikesh Hiraskar <hrishihiraskar@gmail.com> Signed-off-by: Manish Kumar B <bmanish15597@gmail.com> Signed-off-by: Sachin D. Patil <sdp.sachin@gmail.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Acked-by: Dave Taht <dave.taht@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL) Notice that, in this case, variable alloc_size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Heiner Kallweit says: ==================== net: phy: aquantia: add hwmon support This series adds HWMON support for the temperature sensor and the related alarms on the 107/108/109 chips. v2: - remove struct aqr_priv - rename header file to aquantia.h v3: - add conditional compiling of aquantia_hwmon.c - improve converting sensor register values to/from long - add helper aqr_hwmon_test_bit ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
This adds HWMON support for the temperature sensor and the related alarms on the 107/108/109 chips. This patch is based on work from Nikita and Andrew. I added: - support for changing alarm thresholds via sysfs - move HWMON code to a separate source file to improve maintainability - smaller changes like using IS_REACHABLE instead of ifdef (avoids problems if PHY driver is built in and HWMON is a module) v2: - remove struct aqr_priv - rename header file to aquantia.h v3: - add conditional compiling of aquantia_hwmon.c - improve converting sensor register values to/from long - add helper aqr_hwmon_test_bit Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Rename aquantia.c to aquantia_main.c to be prepared for adding new functionality to separate source code files. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2019-02-22 This series contains updates to the ice driver only. Bruce adds the __always_unused attribute to a parameter to avoid compiler warnings when using -Wunused-parameter. Fixed unnecessary type-casting and the use of sizeof(). Fix the allocation of structs that have become memory hogs, so allocate them in heaps and fix all the associated references. Fixed the "possible" numeric overflow issues that were caught with static analysis. Maciej fixes the maximum MTU calculation by taking into account double VLAN tagging amd ensure that the operations are done in the correct order. Victor fixes the supported node calculation, where we were not taking into account if there is space to add the new VSI or intermediate node above that layer, then it is not required to continue the calculation. Added a check for a leaf node presence for a given VSI, which is needed before removing a VSI. Jake fixes an issue where the VSI list is shared, so simply removing a VSI from the list will cause issues for the other users who reference the list. Since we also free the memory, this could lead to segmentation faults. Brett fixes an issue where driver unload could cause a system reboot when intel_iommu=on parameter is set. The issue is that we are not clearing the CAUSE_ENA bit for the appropriate control queues register when freeing the miscellaneous interrupt vector. Mitch is so kind, he prevented spamming the VF with link messages when the link status really has not changed. Updates the driver to use the absolute vector ID and not the per-PF vector ID for the VF MSIx vector allocation. Lukasz fixes the ethtool pause parameter for the ice driver, which was originally based off the link status but is now based off the PHY configuration. This is to resolve an issue where pause parameters could be set while link was down. Jesse updates the string that reports statistics so the string does not get modified at runtime and cause reports of string truncation. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Buslov authored
Function tc_dump_chain() obtains and releases block->lock on each iteration of its inner loop that dumps all chains on block. Outputting chain template info is fast operation so locking/unlocking mutex multiple times is an overhead when lock is highly contested. Modify tc_dump_chain() to only obtain block->lock once and dump all chains without releasing it. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Buslov authored
Using tcf_walker->stop flag to determine when tcf_walker->fn() was called at least once is unreliable. Some classifiers set 'stop' flag on error before calling walker callback, other classifiers used to call it with NULL filter pointer when empty. In order to prevent further regressions, extend tcf_walker structure with dedicated 'nonempty' flag. Set this flag in tcf_walker->fn() implementation that is used to check if classifier has filters configured. Fixes: 8b64678e ("net: sched: refactor tp insert/delete for concurrent execution") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marek Behún authored
The Topaz family should have different phylink_validate method from the Peridot, since on Topaz the port supporting 2500BaseX mode is port 5, not 9 and 10. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marek Behún authored
Commit 787799a9 sets the SERDES interfaces of 6390 and 6390X to 1000BaseX, but this is only needed on 6390X, since there are SERDES interfaces which can be used on lower ports on 6390. This commit fixes this by returning to previous behaviour on 6390. (Previous behaviour means that CMODE is not set at all if requested mode is NA). This is needed on Turris MOX, where the 88e6190 is connected to CPU in 2500BaseX mode. Fixes: 787799a9 ("net: dsa: mv88e6xxx: Default ports 9/10 6390X CMODE to 1000BaseX") Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-