- 02 Dec, 2020 19 commits
-
-
Tom Rix authored
The macro use will already have a semicolon. Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201127175821.2756988-1-trix@redhat.com
-
Ajay Singh authored
Added multiple queues[BK,BE,VI,VO] to handle different priority data packets. Before adding a packet to the queue, checked its priority from the header, and then add to the suitable queue. The limit for each queue is maintained separately. Also while passing the packets to the firmware via VMM take care to select data packets based on priority and available space. Signed-off-by:
Ajay Singh <ajay.kathat@microchip.com> Signed-off-by:
-
Ajay Singh authored
Added complete() call for failure case in wilc_wlan_txq_add_cfg_pkt(). Signed-off-by:
-
Ajay Singh authored
Before returing from wilc_wlan_txq_add_mgmt_pkt() invoke tx_complete_fn() callback to free up allocated memory for failure case. Signed-off-by:
-
Ajay Singh authored
Before returing from wilc_wlan_txq_add_net_pkt() invoke tx_complete_fn() callback to free up allocated memory for failure cases. Signed-off-by:
-
Ajay Singh authored
Added support for 'ndo_set_mac_address call' callback to allow change of interface MAC address. Signed-off-by:
-
Matthias Brugger authored
Apart from a firmware binary the chip needs a config file used by the FW. Add the config files to modinfo so that they can be read by userspace. Signed-off-by:
Matthias Brugger <mbrugger@suse.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Tian Tao authored
Switch to using the new API kobj_to_dev(). Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Signed-off-by:
-
Ching-Te Ku authored
Add toggle table related function to enhance WL throughput when WL coexist with 4/18 HID. The toggle table feature will toggle WL/BT priority table during WL slot, it can decrease the impact from HID's frequently packets and prevent HID lag. Signed-off-by:
Ching-Te Ku <ku920601@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Ching-Te Ku authored
Add modifications for A2DP interoperability issue of TWS earphones. Some TWS earphones has low buffer size, so it's necessary to reduce the slot period to let it get data more frequently. (e.g. use 4-slot to replace the original 2-slot method). Signed-off-by:
-
Ching-Te Ku authored
The original setting misses some necessary configuration. Make coexistence slot align to beacon and check the connection situation to know if we need to extend WLAN slot or not. Signed-off-by:
-
Ching-Te Ku authored
Some AP will not follow the power save request, or it cannot stop transmission until its queue is empty. It may bring the decreasing of data rate. WLAN firmware will count is the AP still leaked packet after power save handshake was done or not to enable WLAN slot extend mechanism. The extend WLAN slot mechanism will extend the WLAN slot after power save handshake, 5 ms per times, maximum is 5 times to received the leaked packet to avoid the rate lower down. And if the transmission was already locked at CCK rate. The extended WLAN slot can also increase the opportunity that we can received the CCK's long packet and be released from CCK rate. While BT multi-link status was finished, there is possible that it still has some packet remained for seconds. Add a timer to remain the multi-link mechanism to protect WLAN Rx. Signed-off-by:
-
Ching-Te Ku authored
Add a flag to make decision whether the mechanism should go into free-run mode or not. For now, it is always false, the flag assignment will be implemented later. Signed-off-by:
-
Ching-Te Ku authored
Add TDMA slot type setting for later usage. Since the transmission of HID profile is very frequently, it may bring a big impact to WLAN performance. To change slot type, it can make mechanism be more flexible. Signed-off-by:
-
Ching-Te Ku authored
In free run mode, this WLAN info updating is only related to AFH information, not related to the connection state, which is the current implementation. Always update WLAN info in free run mode now. Signed-off-by:
-
Ching-Te Ku authored
Update A2DP+PAN+WL mechanism for CPT(Coexistence Performance Test) to enhance WL/BT performance at the environment that some specific AP are existing. Signed-off-by:
-
Ching-Te Ku authored
Add message for debugging usage and the program flow is no change. Add a variable reserved for WLAN firmware synchronize. Add a group of variable to save BT packet counter, it will be assigned as mechanism judgment in the future. Now it is just for debug usage. Signed-off-by:
-
Ching-Te Ku authored
When WLAN entering or leaving, it's necessary to run coexistence mechanism to ensure the setting matched current status. Without calling rtw_coex_run_coex(), WLAN poor throughput or bad A2DP quality may happen. Signed-off-by:
-
Tokunori Ikegami authored
This reverts commit 28606150. Since actually Buffalo WI-U3-866D is falied to power on with the change. The rtl8812au driver code to power on is same with the rtl8821a code. But the rtl8821ae included rtl8821a does not support USB interface. So seems that rtl8812au should be supported by rt1l8821a code with USB. Signed-off-by:
Tokunori Ikegami <ikegami.t@gmail.com> Cc: linux-wireless@vger.kernel.org Signed-off-by:
-
- 24 Nov, 2020 21 commits
-
-
Qinglang Miao authored
Add the missing destroy_workqueue() before return from cw1200_init_common in the error handling case. Fixes: a910e4a9 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by:
-
Jisheng Zhang authored
The REG_PORT is defined twice, so remove one of them. Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by:
-
Jia-Ju Bai authored
In rtl8723e_tx_fill_cmddesc(), skb->data is mapped to streaming DMA on line 531: dma_addr_t mapping = dma_map_single(..., skb->data, ...); On line 534, skb->data is assigned to hdr after cast: struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data); Then hdr->frame_control is accessed on line 535: __le16 fc = hdr->frame_control; This DMA access may cause data inconsistency between CPU and hardwre. To fix this bug, hdr->frame_control is accessed before the DMA mapping. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Jia-Ju Bai authored
In rtl92de_tx_fill_cmddesc(), skb->data is mapped to streaming DMA on line 667: dma_addr_t mapping = dma_map_single(..., skb->data, ...); On line 669, skb->data is assigned to hdr after cast: struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data); Then hdr->frame_control is accessed on line 670: __le16 fc = hdr->frame_control; This DMA access may cause data inconsistency between CPU and hardwre. To fix this bug, hdr->frame_control is accessed before the DMA mapping. Signed-off-by:
-
Jia-Ju Bai authored
In rtl92ce_tx_fill_cmddesc(), skb->data is mapped to streaming DMA on line 530: dma_addr_t mapping = dma_map_single(..., skb->data, ...); On line 533, skb->data is assigned to hdr after cast: struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data); Then hdr->frame_control is accessed on line 534: __le16 fc = hdr->frame_control; This DMA access may cause data inconsistency between CPU and hardwre. To fix this bug, hdr->frame_control is accessed before the DMA mapping. Signed-off-by:
-
Jia-Ju Bai authored
In rtl88ee_tx_fill_cmddesc(), skb->data is mapped to streaming DMA on line 677: dma_addr_t mapping = dma_map_single(..., skb->data, ...); On line 680, skb->data is assigned to hdr after cast: struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data); Then hdr->frame_control is accessed on line 681: __le16 fc = hdr->frame_control; This DMA access may cause data inconsistency between CPU and hardwre. To fix this bug, hdr->frame_control is accessed before the DMA mapping. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Zhang Changzhong authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 17ff2c79 ("rsi: reset device changes for 9116") Reported-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by:
-
Dmitry Safonov authored
bindex can be out of BA window (64): tid 0 seq 2983, start_seq 2915, bindex 68, index 39 tid 0 seq 2984, start_seq 2915, bindex 69, index 40 tid 0 seq 2985, start_seq 2915, bindex 70, index 41 tid 0 seq 2986, start_seq 2915, bindex 71, index 42 tid 0 seq 2879, start_seq 2915, bindex 4060, index 63 tid 0 seq 2854, start_seq 2915, bindex 4035, index 38 tid 0 seq 2795, start_seq 2915, bindex 3976, index 43 tid 0 seq 2989, start_seq 2924, bindex 65, index 45 tid 0 seq 2992, start_seq 2924, bindex 68, index 48 tid 0 seq 2993, start_seq 2924, bindex 69, index 49 tid 0 seq 2994, start_seq 2924, bindex 70, index 50 tid 0 seq 2997, start_seq 2924, bindex 73, index 53 tid 0 seq 2795, start_seq 2941, bindex 3950, index 43 tid 0 seq 2921, start_seq 2941, bindex 4076, index 41 tid 0 seq 2929, start_seq 2941, bindex 4084, index 49 tid 0 seq 3011, start_seq 2946, bindex 65, index 3 tid 0 seq 3012, start_seq 2946, bindex 66, index 4 tid 0 seq 3013, start_seq 2946, bindex 67, index 5 In result isset() will try to dereference something on the stack, causing panics: BUG: unable to handle page fault for address: ffffa742800ed01f #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 6a4e9067 P4D 6a4e9067 PUD 6a4ec067 PMD 6a4ed067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Not tainted 5.8.5-arch1-1-kdump #1 Hardware name: Apple Inc. MacBookAir3,1/Mac-942452F5819B1C1B, BIOS MBA31.88Z.0061.B07.1201241641 01/24/12 RIP: 0010:brcms_c_ampdu_dotxstatus+0x343/0x9f0 [brcmsmac] Code: 54 24 20 66 81 e2 ff 0f 41 83 e4 07 89 d1 0f b7 d2 66 c1 e9 03 0f b7 c9 4c 8d 5c 0c 48 49 8b 4d 10 48 8b 79 68 41 57 44 89 e1 <41> 0f b6 33 41 d3 e0 48 c7 c1 38 e0 ea c0 48 83 c7 10 44 21 c6 4c RSP: 0018:ffffa742800ecdd0 EFLAGS: 00010207 RAX: 0000000000000019 RBX: 000000000000000b RCX: 0000000000000006 RDX: 0000000000000ffe RSI: 0000000000000004 RDI: ffff8fc6ad776800 RBP: ffff8fc6855acb00 R08: 0000000000000001 R09: 00000000000005d9 R10: 00000000fffffffe R11: ffffa742800ed01f R12: 0000000000000006 R13: ffff8fc68d75a000 R14: 00000000000005db R15: 0000000000000019 FS: 0000000000000000(0000) GS:ffff8fc6aad00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa742800ed01f CR3: 000000002480a000 CR4: 00000000000406e0 Call Trace: <IRQ> brcms_c_dpc+0xb46/0x1020 [brcmsmac] ? wlc_intstatus+0xc8/0x180 [brcmsmac] ? __raise_softirq_irqoff+0x1a/0x80 brcms_dpc+0x37/0xd0 [brcmsmac] tasklet_action_common.constprop.0+0x51/0xb0 __do_softirq+0xff/0x340 ? handle_level_irq+0x1a0/0x1a0 asm_call_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x5f/0x80 irq_exit_rcu+0xcb/0x120 common_interrupt+0xd1/0x200 asm_common_interrupt+0x1e/0x40 RIP: 0010:cpuidle_enter_state+0xb3/0x420 Check if the block is within BA window and only then check block's status. Otherwise as Behan wrote: "When I came back to Dublin I was courtmartialed in my absence and sentenced to death in my absence, so I said they could shoot me in my absence." Also reported: https://bbs.archlinux.org/viewtopic.php?id=258428 https://lore.kernel.org/linux-wireless/87tuwgi92n.fsf@yujinakao.com/Reported-by:
Yuji Nakao <contact@yujinakao.com> Signed-off-by:
Dmitry Safonov <dima@arista.com> Signed-off-by:
-
Remi Depommier authored
The left-hand side of the assignment from cpu_to_le32() should be of type __le32. This commit clears the warning reported by sparse when building with C=1 CF="-D__CHECK_ENDIAN__". Fixes: d56fd83c ("brcmfmac: fix SDIO access for big-endian host") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Remi Depommier <rde@setrix.com> Signed-off-by:
-
Wang Hai authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: b7da53cd ("qtnfmac_pcie: use single PCIe driver for all platforms") Reported-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
Kaixu Xia authored
The variable u4tmp is overwritten by the following call and the assignment is useless, so remove it. Reported-by:
Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by:
Kaixu Xia <kaixuxia@tencent.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
ezusb_read_ltv() is always invoked via the ->read_ltv() callback. This callback is mostly invoked under orinoco_lock() which disables BH. There are a few invocations during probe which occur in preemptible context via: ezusb_probe() -> orinoco_init() -> determine_fw_capabilities() Extend `hermes_ops' with the ->read_ltv_pr callback which is implemented with the same callback like ->read_ltv on `hermes_ops_local'. On `ezusb_ops' ->read_ltv is used for callbacks under the lock which need to poll. The new ->read_ltv_pr() is used in the preemptible context in which it is possible to wait for the completion. Provide HERMES_READ_RECORD_PR() and hermes_read_wordrec_pr() which behave like their non _pr equivalents and invoke ->read_ltv_pr(). This removes the last user of ezusb_req_ctx_wait() and can now be removed. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Sebastian Andrzej Siewior authored
All invocations of ezusb_docmd_wait() happen via ->cmd_wait(). This callback is always invoked under the orinoco_lock() which disables BH. Use ezusb_req_ctx_wait_poll() for ezusb_docmd_wait() because it must not sleep. Signed-off-by:
-
Sebastian Andrzej Siewior authored
ezusb_doicmd_wait() is invoked via ->init_cmd_wait() callback. This callback is only invoked hermesi_program_init() and hermesi_program_end() which are the ->program_init() and ->program_end() callbacks as assigned by `hermes_ops_local'. They are never used by the USB interface since the USB interface provides its own set of callbacks by `ezusb_ops'. Replace ezusb_doicmd_wait() with a warning in case I missed the obvious. Signed-off-by:
-
Sebastian Andrzej Siewior authored
All invocation of ezusb_write_ltv() happen via ->write_ltv() and are performed under the orinoco_lock() which disables BH. Use ezusb_req_ctx_wait_poll() for ezusb_write_ltv() because it must not sleep. Signed-off-by:
-
Sebastian Andrzej Siewior authored
ezusb_read_pda() is invoked via ->read_pda() while firmware is loaded in preemtible context. Use ezusb_req_ctx_wait_compl() in ezusb_read_pda(). Signed-off-by:
-
Sebastian Andrzej Siewior authored
The ezusb_program() is invoked via ->program() in preemptible context during firmware loading. This is also true for the ->program_init() and ->program_end() callback. Use ezusb_req_ctx_wait_compl() in ezusb_program_init(), ezusb_program_bytes(), ezusb_program_end() which are part of firmware loading during device probe. Signed-off-by:
-
Sebastian Andrzej Siewior authored
ezusb_init() is always invoked in preemptible context during device probe. Only orinoco_up() -> orinoco_reinit_firmware() may invoke the function from atomic context but this is never used for the USB interface. Use ezusb_req_ctx_wait_compl() for the ezusb_write_ltv() and ezusb_docmd_wait() invocations from within ezusb_init(). Preserve the generic versions which have still other user via the callback. Signed-off-by:
-
Sebastian Andrzej Siewior authored
ezusb_xmit() sets ->in_rid in its request which means it does not wait for an answer. Use the ezusb_req_ctx_wait_skip() to denote that an answer is not expected. Signed-off-by:
-
Sebastian Andrzej Siewior authored
ezusb_access_ltv() sends the prepared request to the USB device. Requests which have ->in_rid set expect an answer from the USB device and the function has to wait until the URB with the answer arrives. The function uses in_interrupt() to determine if it can simply sleep on the completion and be woken up once the answer arrives or if it needs to poll on the completion. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. Aside of that in_interrupt() is not correct as it does not catch preempt disabled regions in which sleeping is also not allowed. Provide stubs which can be used as a replacement. The current default is the current behaviour which sleeps/polls depending on in_interrupt(). The goal is to audit all callers and use either the poll or sleep version. Signed-off-by:
-
