The RC FTS configuration is done using hardcoded registers
and bitshift operations. Make it a bit clean defining some
prepocessor definitions and simple macros.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make some function definition changes in order to get all the
functions in the code with the same style.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a comment at the beggining which has no sense at all.
Remove it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reorder a bit register definitions and some values into
logical groups adding some comments for each group. Also
unify all of register to use 16 bit in definitions instead
of having some with 16 bits and some with 8 bits.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are some preprocessor definition which are not being used at
all. Remove them cleaning the code a bit.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of just inline this code in the probe driver function factor
out a new 'mt7621_pcie_init_ports' function to achieve this.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

'pcie_link_status' is a global variable which is being used as a
mask to know which virtual bridges are or not enabled. Instead of
this extract a new 'mt7621_pcie_init_virtual_bridges' function where
a similar local variable is used for the same task. This allow us to
properly configure the virtual PCI-PCI bridges in configuration
registers of the mt7621 pci controller. For a correct initiation of
which is connected use 'enabled' field of 'mt7621_pcie_port' struct.
With this change driver probe function gets a bit cleaner and readable.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver probe function check for a bit in 'pcie_link_status' for
enabling the pcie port or not. Instead of this add 'enabled' field
in 'mt7621_pcie_port' structure and check its value to achieve this
inside a new 'mt7621_pcie_enable_ports' function. The offsets for
the correct port are derived from the slot of the port. This field
'enabled' is properly initilized in 'mt7621_pcie_init_port'. Also
depending of the number of ports enabled we have to properly init
its registers taking into account that we will use virtual bridges
from zero to num_slots_enabled as follows:
    - Only one enabled -> only enable virtual bridge 0.
    - Two enabled -> enable virtual bridges 0 and 1.
    - Three enabled -> enable virtual bridges 0, 1 and 2.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch script is complaining about the use of printk instead
of use more proper dev_* kernel functions. Replace all of them
removing warnings.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Chackpatch script is compalining about one comment which
is not following the kernel style. Fix it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are some pointer read and writes which can be replaced
properly using sysctl registers readed from device tree. Remap
sysctl registers and replace in proper places.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add missing system control registers address in pcie node of
the device tree.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename function 'mt7621_pcie_enable_port' with a name which is better
for what the function is really doing calling it 'mt7621_pcie_init_port'.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move debug for the port N_FTS from driver probe function to the more
appropiate one 'mt7621_pcie_enable_port'.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Factor out a new function 'mt7621_enable_phy' for enabling the
pcie phy for each port and call it from 'mt7621_pcie_enable_port'.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function 'bypass_pipe_rst' and 'set_phy_for_ssc' can be
written in a cleaner way. Instead of use comments to see which
bits are the ones which are being enabled add new macros with
that information using BIT and GENMASK kernel macros. Avoid the
use of set_pcie_phy which is kind of dark and use new macros also
resetting and adding bits using bitwise operators directly in the
code. Now these function are offset-based on the port to use them
cleaner in driver probe functio and improving readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reset bits related macros are in different parts. Reagroup
all of them together to  improve readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are three macros which are not being used at all.
Remove them.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This two lines whch are commented are not needed at all.
Remove them.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This file has a valid SPDX license line added so reamining
GPL2+ boilerplate text is not needed at all. Remove it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver is using reset_control kernel API's to manage this so this
two macros are not needed anymore. Remove them.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver probe function is a mess and shall be refactored a lot. At first
make use of assert and deassert control factoring out a new function
called 'mt7621_pcie_enable_port'.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mt7621-pcie_port data structure has filed 'base' as the base address for
read and write related port registers. Create two inline functions
'pcie_port_read' and 'pcie_port_write' to make this task easier and
code more readable.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver probe function calls 'devm_pci_alloc_host_bridge'. If this call fails
it is returning -ENODEV. Return -ENOMEM instead which is more accurate for
this.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add initialization of each PCIe port reading and initializing
data using device tree.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We would like to update the maintainer email id's for wilc1000 driver.
Signed-off-by: Aditya Shankar <aditya.shankar@microchip.com>
Signed-off-by: Ganesh Krishna <ganesh.krishna@microchip.com>
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unmatched right bracket. Reported by uncrustify.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove two instances of a comparison to BOOL.
Reported by coccinelle.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove extra spaces before the tab character inside a comment section.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add extra spaces around the OR operator.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove extra blank lines to conform with coding style.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove extra space before a tab character.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove continuous multiple blank lines.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace SPDX License Identifier comments with C comments.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Align arguments with the right side of the open left parentheses.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the SPDX identifier with standard C comment.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Align parameters to the right side of the left parentheses
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Shorten pointer NULL check by simple truth test.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It needs an explicit LZ4 library dependency
if lz4 compression is enabled, found by kbuild randconfig.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 05f9d4a0 ("staging: erofs: use the new LZ4_decompress_safe_partial()")
Signed-off-by: Gao Xiang <hsiangkao@aol.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Heap statistics have been removed and currently even basics statistics
are missing.

This patch creates per heap debugfs directory /sys/kernel/debug/<heap_name>
and adds the following counters:
- the number of allocated buffers;
- the number of allocated bytes;
- the number of allocated bytes watermark.
Signed-off-by: Alexey Skidanov <alexey.skidanov@intel.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>