This patch adds a way for ahash users to determine whether a key
is required by a crypto_ahash transform.

Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds a compatibility path to support old applications
that do acept(2) before setkey.

Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds a compatibility path to support old applications
that do acept(2) before setkey.

Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When we fail an accept(2) call we will end up freeing the socket
twice, once due to the direct sk_free call and once again through
newsock.

This patch fixes this by removing the sk_free call.

Cc: stable@vger.kernel.org
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Each af_alg parent socket obtained by socket(2) corresponds to a
tfm object once bind(2) has succeeded.  An accept(2) call on that
parent socket creates a context which then uses the tfm object.

Therefore as long as any child sockets created by accept(2) exist
the parent socket must not be modified or freed.

This patch guarantees this by using locks and a reference count
on the parent socket.  Any attempt to modify the parent socket will
fail with EBUSY.

Cc: stable@vger.kernel.org
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Some cipher implementations will crash if you try to use them
without calling setkey first.  This patch adds a check so that
the accept(2) call will fail with -ENOKEY if setkey hasn't been
done on the socket yet.

Cc: stable@vger.kernel.org
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Dmitry Vyukov <dvyukov@google.com>

Pull crypto update from Herbert Xu:
 "Algorithms:
   - Add RSA padding algorithm

  Drivers:
   - Add GCM mode support to atmel
   - Add atmel support for SAMA5D2 devices
   - Add cipher modes to talitos
   - Add rockchip driver for rk3288
   - Add qat support for C3XXX and C62X"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (103 commits)
  crypto: hifn_795x, picoxcell - use ablkcipher_request_cast
  crypto: qat - fix SKU definiftion for c3xxx dev
  crypto: qat - Fix random config build issue
  crypto: ccp - use to_pci_dev and to_platform_device
  crypto: qat - Rename dh895xcc mmp firmware
  crypto: 842 - remove WARN inside printk
  crypto: atmel-aes - add debug facilities to monitor register accesses.
  crypto: atmel-aes - add support to GCM mode
  crypto: atmel-aes - change the DMA threshold
  crypto: atmel-aes - fix the counter overflow in CTR mode
  crypto: atmel-aes - fix atmel-ctr-aes driver for RFC 3686
  crypto: atmel-aes - create sections to regroup functions by usage
  crypto: atmel-aes - fix typo and indentation
  crypto: atmel-aes - use SIZE_IN_WORDS() helper macro
  crypto: atmel-aes - improve performances of data transfer
  crypto: atmel-aes - fix atmel_aes_remove()
  crypto: atmel-aes - remove useless AES_FLAGS_DMA flag
  crypto: atmel-aes - reduce latency of DMA completion
  crypto: atmel-aes - remove unused 'err' member of struct atmel_aes_dev
  crypto: atmel-aes - rework crypto request completion
  ...

Pull UBI/UBIFS updates from Richard Weinberger:
 "This contains three changes - two cleanups and one UBI wear leveling
  improvement by Sebastian Siewior"

* tag 'upstream-4.5-rc1' of git://git.infradead.org/linux-ubifs:
  ubifs: Use XATTR_*_PREFIX_LEN
  UBIFS: add a comment in key.h for unused parameter
  mtd: ubi: wl: avoid erasing a PEB which is empty

Pull configfs updates from Christoph Hellwig:
 "I'm assisting Joel as co-maintainer and patch monkey now, and you will
  see pull reuquests from me for a while.

  Besides the MAINTAINERS update there is just a single change, which
  adds support for binary attributes to configfs, which are very similar
  to the sysfs binary attributes.  Thanks to Pantelis Antoniou!

  You will see another actually bigger set of configfs changes in the
  SCSI target pull from Nic - those were merged before this new tree
  even existed"

* tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs:
  configfs: add myself as co-maintainer, updated git tree
  configfs: implement binary attributes

Pull GFS2 updates from Bob Peterson:
 "Here is a list of patches we've accumulated for GFS2 for the current
  upstream merge window.  Last window's set was short, but I warned that
  this one would be bigger, and so it is.  We've got 19 patches:

   - A patch from Abhi Das to propagate the GFS2_DIF_SYSTEM bit so that
     newly added journals don't get flagged, deleted, and recreated by
     fsck.gfs2.

   - Two patches from Andreas Gruenbacher to improve GFS2 performance
     where extended attributes are involved.

   - A patch from Andy Price to fix a suspicious rcu dereference error.

   - Two patches from Ben Marzinski that rework how GFS2's NFS cookies
     are managed.  This fixes readdir problems with nfs-over-gfs2.

   - A patch from Ben Marzinski that fixes a race in unmounting GFS2.

   - A set of four patches from me to move the resource group
     reservations inside the gfs2 inode to improve performance and fix a
     bug whereby get_write_access improperly prevented some operations
     like chown.

   - A patch from me to spinlock-protect the setting of system statfs
     file data.  This was causing small discrepancies between df and du.

   - A patch from me to reintroduce a timeout while clearing glocks
     which was accidentally dropped some time ago.

   - A patch from me to wait for iopen glock dequeues in order to
     improve deleting of files that were unlinked from a different
     cluster node.

   - A patch from me to ensure metadata address spaces get truncated
     when an inode is evicted.

   - A patch from me to fix a bug in which a memory leak could occur in
     some error cases when inodes were trying to be created.

   - A patch to consistently use iopen glocks to transition from the
     unlinked state to the deleted state.

   - A patch to fix a glock reference count error when inode creation
     fails.

   - A patch from Junxiao Bi to fix an flock panic.

   - A patch from Markus Elfring that removes an unnecessary if"

* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: fix flock panic issue
  GFS2: Don't do glock put on when inode creation fails
  GFS2: Always use iopen glock for gl_deletes
  GFS2: Release iopen glock in gfs2_create_inode error cases
  GFS2: Truncate address space mapping when deleting an inode
  GFS2: Wait for iopen glock dequeues
  gfs2: clear journal live bit in	gfs2_log_flush
  gfs2: change gfs2 readdir cookie
  gfs2: keep offset when splitting dir leaf blocks
  GFS2: Reintroduce a timeout in function gfs2_gl_hash_clear
  GFS2: Update master statfs buffer with sd_statfs_spin locked
  GFS2: Reduce size of incore inode
  GFS2: Make rgrp reservations part of the gfs2_inode structure
  GFS2: Extract quota data from reservations structure (revert 5407e242)
  gfs2: Extended attribute readahead optimization
  gfs2: Extended attribute readahead
  GFS2: Use rht_for_each_entry_rcu in glock_hash_walk
  GFS2: Delete an unnecessary check before the function call "iput"
  gfs2: Automatically set GFS2_DIF_SYSTEM flag on system files

Pull misc vfs updates from Al Viro:
 "All kinds of stuff.  That probably should've been 5 or 6 separate
  branches, but by the time I'd realized how large and mixed that bag
  had become it had been too close to -final to play with rebasing.

  Some fs/namei.c cleanups there, memdup_user_nul() introduction and
  switching open-coded instances, burying long-dead code, whack-a-mole
  of various kinds, several new helpers for ->llseek(), assorted
  cleanups and fixes from various people, etc.

  One piece probably deserves special mention - Neil's
  lookup_one_len_unlocked().  Similar to lookup_one_len(), but gets
  called without ->i_mutex and tries to avoid ever taking it.  That, of
  course, means that it's not useful for any directory modifications,
  but things like getting inode attributes in nfds readdirplus are fine
  with that.  I really should've asked for moratorium on lookup-related
  changes this cycle, but since I hadn't done that early enough...  I
  *am* asking for that for the coming cycle, though - I'm going to try
  and get conversion of i_mutex to rwsem with ->lookup() done under lock
  taken shared.

  There will be a patch closer to the end of the window, along the lines
  of the one Linus had posted last May - mechanical conversion of
  ->i_mutex accesses to inode_lock()/inode_unlock()/inode_trylock()/
  inode_is_locked()/inode_lock_nested().  To quote Linus back then:

    -----
    |    This is an automated patch using
    |
    |        sed 's/mutex_lock(&\(.*\)->i_mutex)/inode_lock(\1)/'
    |        sed 's/mutex_unlock(&\(.*\)->i_mutex)/inode_unlock(\1)/'
    |        sed 's/mutex_lock_nested(&\(.*\)->i_mutex,[     ]*I_MUTEX_\([A-Z0-9_]*\))/inode_lock_nested(\1, I_MUTEX_\2)/'
    |        sed 's/mutex_is_locked(&\(.*\)->i_mutex)/inode_is_locked(\1)/'
    |        sed 's/mutex_trylock(&\(.*\)->i_mutex)/inode_trylock(\1)/'
    |
    |    with a very few manual fixups
    -----

  I'm going to send that once the ->i_mutex-affecting stuff in -next
  gets mostly merged (or when Linus says he's about to stop taking
  merges)"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  nfsd: don't hold i_mutex over userspace upcalls
  fs:affs:Replace time_t with time64_t
  fs/9p: use fscache mutex rather than spinlock
  proc: add a reschedule point in proc_readfd_common()
  logfs: constify logfs_block_ops structures
  fcntl: allow to set O_DIRECT flag on pipe
  fs: __generic_file_splice_read retry lookup on AOP_TRUNCATED_PAGE
  fs: xattr: Use kvfree()
  [s390] page_to_phys() always returns a multiple of PAGE_SIZE
  nbd: use ->compat_ioctl()
  fs: use block_device name vsprintf helper
  lib/vsprintf: add %*pg format specifier
  fs: use gendisk->disk_name where possible
  poll: plug an unused argument to do_poll
  amdkfd: don't open-code memdup_user()
  cdrom: don't open-code memdup_user()
  rsxx: don't open-code memdup_user()
  mtip32xx: don't open-code memdup_user()
  [um] mconsole: don't open-code memdup_user_nul()
  [um] hostaudio: don't open-code memdup_user()
  ...

Pull iov_iter infrastructure updates from Al Viro:
 "A couple of iov_iter updates"

* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  iov_iter: export import_single_range()
  iov_iter: constify {csum_and_,}copy_to_iter()

Pull vfs copy_file_range updates from Al Viro:
 "Several series around copy_file_range/CLONE"

* 'work.copy_file_range' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  btrfs: use new dedupe data function pointer
  vfs: hoist the btrfs deduplication ioctl to the vfs
  vfs: wire up compat ioctl for CLONE/CLONE_RANGE
  cifs: avoid unused variable and label
  nfsd: implement the NFSv4.2 CLONE operation
  nfsd: Pass filehandle to nfs4_preprocess_stateid_op()
  vfs: pull btrfs clone API to vfs layer
  locks: new locks_mandatory_area calling convention
  vfs: Add vfs_copy_file_range() support for pagecache copies
  btrfs: add .copy_file_range file operation
  x86: add sys_copy_file_range to syscall tables
  vfs: add copy_file_range syscall and vfs helper

Pull file locking updates from Jeff Layton:
 "File locking related changes for v4.5 (pile #1)

  Highlights:
   - new Kconfig option to allow disabling mandatory locking (which is
     racy anyway)
   - new tracepoints for setlk and close codepaths
   - fix for a long-standing bug in code that handles races between
     setting a POSIX lock and close()"

* tag 'locks-v4.5-1' of git://git.samba.org/jlayton/linux:
  locks: rename __posix_lock_file to posix_lock_inode
  locks: prink more detail when there are leaked locks
  locks: pass inode pointer to locks_free_lock_context
  locks: sprinkle some tracepoints around the file locking code
  locks: don't check for race with close when setting OFD lock
  locks: fix unlock when fcntl_setlk races with a close
  fs: make locks.c explicitly non-modular
  locks: use list_first_entry_or_null()
  locks: Don't allow mounts in user namespaces to enable mandatory locking
  locks: Allow disabling mandatory locking at compile time

Pull UML updates from Richard Weinberger:
 "This contains beside of random fixes/cleanups two bigger changes:

   - seccomp support by Mickaël Salaün

   - IRQ rework by Anton Ivanov"

* 'for-linus-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Use race-free temporary file creation
  um: Do not set unsecure permission for temporary file
  um: Fix build error and kconfig for i386
  um: Add seccomp support
  um: Add full asm/syscall.h support
  selftests/seccomp: Remove the need for HAVE_ARCH_TRACEHOOK
  um: Fix ptrace GETREGS/SETREGS bugs
  um: link with -lpthread
  um: Update UBD to use pread/pwrite family of functions
  um: Do not change hard IRQ flags in soft IRQ processing
  um: Prevent IRQ handler reentrancy
  uml: flush stdout before forking
  uml: fix hostfs mknod()

Pull KVM updates from Paolo Bonzini:
 "PPC changes will come next week.

   - s390: Support for runtime instrumentation within guests, support of
     248 VCPUs.

   - ARM: rewrite of the arm64 world switch in C, support for 16-bit VM
     identifiers.  Performance counter virtualization missed the boat.

   - x86: Support for more Hyper-V features (synthetic interrupt
     controller), MMU cleanups"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (115 commits)
  kvm: x86: Fix vmwrite to SECONDARY_VM_EXEC_CONTROL
  kvm/x86: Hyper-V SynIC timers tracepoints
  kvm/x86: Hyper-V SynIC tracepoints
  kvm/x86: Update SynIC timers on guest entry only
  kvm/x86: Skip SynIC vector check for QEMU side
  kvm/x86: Hyper-V fix SynIC timer disabling condition
  kvm/x86: Reorg stimer_expiration() to better control timer restart
  kvm/x86: Hyper-V unify stimer_start() and stimer_restart()
  kvm/x86: Drop stimer_stop() function
  kvm/x86: Hyper-V timers fix incorrect logical operation
  KVM: move architecture-dependent requests to arch/
  KVM: renumber vcpu->request bits
  KVM: document which architecture uses each request bit
  KVM: Remove unused KVM_REQ_KICK to save a bit in vcpu->requests
  kvm: x86: Check kvm_write_guest return value in kvm_write_wall_clock
  KVM: s390: implement the RI support of guest
  kvm/s390: drop unpaired smp_mb
  kvm: x86: fix comment about {mmu,nested_mmu}.gva_to_gpa
  KVM: x86: MMU: Use clear_page() instead of init_shadow_page_table()
  arm/arm64: KVM: Detect vGIC presence at runtime
  ...

Pull xen updates from David Vrabel:
 "Xen features and fixes for 4.5-rc0:

   - Stolen ticks and PV wallclock support for arm/arm64

   - Add grant copy ioctl to gntdev device"

* tag 'for-linus-4.5-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/gntdev: add ioctl for grant copy
  x86/xen: don't reset vcpu_info on a cancelled suspend
  xen/gntdev: constify mmu_notifier_ops structures
  xen/grant-table: constify gnttab_ops structure
  xen/time: use READ_ONCE
  xen/x86: convert remaining timespec to timespec64 in xen_pvclock_gtod_notify
  xen/x86: support XENPF_settime64
  xen/arm: set the system time in Xen via the XENPF_settime64 hypercall
  xen/arm: introduce xen_read_wallclock
  arm: extend pvclock_wall_clock with sec_hi
  xen: introduce XENPF_settime64
  xen/arm: introduce HYPERVISOR_platform_op on arm and arm64
  xen: rename dom0_op to platform_op
  xen/arm: account for stolen ticks
  arm64: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops
  arm: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops
  missing include asm/paravirt.h in cputime.c
  xen: move xen_setup_runstate_info and get_runstate_snapshot to drivers/xen/time.c

Pull tiny c6x update from Mark Salter.

* 'for-linux-next' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
  c6x: Use generic clkdev.h header

Pull component updates from Russell King:
 "Updates for the component helper merged last year.

  This update removes the old add_components method of detecting and
  looking up the components associated with a master device.  Last time
  I checked during the 4.4-rc cycle, there were no users of the old
  interfaces, as has been the case for some time now.  Breakage due to
  conflicting development is possible, in which case this pull will have
  to be reverted - however, these changes have been in linux-next since
  Dec 7th without any problems reported.

  Removal of that then allows us to change the way we track components
  internally, allowing us to release data that has been used for
  matching at the appropriate time, thereby allowing any resource leaks
  caused by that missing functionality to be resolved"

* 'component' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  component: add support for releasing match data
  component: track components via array rather than list
  component: move check for unbound master into try_to_bring_up_masters()
  component: remove old add_components method

Pull ARM updates from Russell King:

 - UEFI boot and runtime services support for ARM from Ard Biesheuvel
   and Roy Franz.

 - DT compatibility with old atags booting protocol for Nokia N900
   devices from Ivaylo Dimitrov.

 - PSCI firmware interface using new arm-smc calling convention from
   Jens Wiklander.

 - Runtime patching for udiv/sdiv instructions for ARMv7 CPUs that
   support these instructions from Nicolas Pitre.

 - L2x0 cache updates from Dirk B and Linus Walleij.

 - Randconfig fixes from Arnd Bergmann.

 - ARMv7M (nommu) updates from Ezequiel Garcia

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (34 commits)
  ARM: 8481/2: drivers: psci: replace psci firmware calls
  ARM: 8480/2: arm64: add implementation for arm-smccc
  ARM: 8479/2: add implementation for arm-smccc
  ARM: 8478/2: arm/arm64: add arm-smccc
  ARM: 8494/1: mm: Enable PXN when running non-LPAE kernel on LPAE processor
  ARM: 8496/1: OMAP: RX51: save ATAGS data in the early boot stage
  ARM: 8495/1: ATAGS: move save_atags() to arch/arm/include/asm/setup.h
  ARM: 8452/3: PJ4: make coprocessor access sequences buildable in Thumb2 mode
  ARM: 8482/1: l2x0: make it possible to disable outer sync from DT
  ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI
  ARM: 8487/1: Remove IPI_CALL_FUNC_SINGLE
  ARM: 8485/1: cpuidle: remove cpu parameter from the cpuidle_ops suspend hook
  ARM: 8484/1: Documentation: l2c2x0: Mention separate controllers explicitly
  ARM: 8483/1: Documentation: l2c: Rename l2cc to l2c2x0
  ARM: 8477/1: runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()
  ARM: 8476/1: VDSO: use PTR_ERR_OR_ZERO for vma check
  ARM: 8453/2: proc-v7.S: don't locate temporary stack space in .text section
  ARM: add UEFI stub support
  ARM: wire up UEFI init and runtime support
  ARM: only consider memblocks with NOMAP cleared for linear mapping
  ...

Pull arm[64] perf updates from Will Deacon:
 "In the past, I have funnelled perf updates through the respective
  architecture trees, but now that the arm/arm64 perf driver has been
  largely consolidated under drivers/perf/, it makes more sense to send
  a separate pull, particularly as I'm listed as maintainer for all the
  files involved.  I offered the branch to arm-soc, but Arnd suggested
  that I just send it to you directly.

  So, here is the arm/arm64 perf queue for 4.5.  The main features are
  described below, but the most useful change is from Drew, which
  advertises our architected event mapping in sysfs so that the perf
  tool is a lot more user friendly and no longer requires the use of
  magic hex constants for profiling common events.

   - Support for the CPU PMU in Cortex-A72

   - Add sysfs entries to describe the architected events and their
     mappings for PMUv{1-3}"

* tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: perf: add support for Cortex-A72
  arm64: perf: add format entry to describe event -> config mapping
  ARM: perf: add format entry to describe event -> config mapping
  arm64: kernel: enforce pmuserenr_el0 initialization and restore
  arm64: perf: Correct Cortex-A53/A57 compatible values
  arm64: perf: Add event descriptions
  arm64: perf: Convert event enums to #defines
  arm: perf: Add event descriptions
  arm: perf: Convert event enums to #defines
  drivers/perf: kill armpmu_register

Pull arm64 updates from Will Deacon:
 "Here is the core arm64 queue for 4.5.  As you might expect, the
  Christmas break resulted in a number of patches not making the final
  cut, so 4.6 is likely to be larger than usual.  There's still some
  useful stuff here, however, and it's detailed below.

  The EFI changes have been Reviewed-by Matt and the memblock change got
  an "OK" from akpm.

  Summary:

   - Support for a separate IRQ stack, although we haven't reduced the
     size of our thread stack just yet since we don't have enough data
     to determine a safe value

   - Refactoring of our EFI initialisation and runtime code into
     drivers/firmware/efi/ so that it can be reused by arch/arm/.

   - Ftrace improvements when unwinding in the function graph tracer

   - Document our silicon errata handling process

   - Cache flushing optimisation when mapping executable pages

   - Support for hugetlb mappings using the contiguous hint in the pte"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (45 commits)
  arm64: head.S: use memset to clear BSS
  efi: stub: define DISABLE_BRANCH_PROFILING for all architectures
  arm64: entry: remove pointless SPSR mode check
  arm64: mm: move pgd_cache initialisation to pgtable_cache_init
  arm64: module: avoid undefined shift behavior in reloc_data()
  arm64: module: fix relocation of movz instruction with negative immediate
  arm64: traps: address fallout from printk -> pr_* conversion
  arm64: ftrace: fix a stack tracer's output under function graph tracer
  arm64: pass a task parameter to unwind_frame()
  arm64: ftrace: modify a stack frame in a safe way
  arm64: remove irq_count and do_softirq_own_stack()
  arm64: hugetlb: add support for PTE contiguous bit
  arm64: Use PoU cache instr for I/D coherency
  arm64: Defer dcache flush in __cpu_copy_user_page
  arm64: reduce stack use in irq_handler
  arm64: mm: ensure that the zero page is visible to the page table walker
  arm64: Documentation: add list of software workarounds for errata
  arm64: mm: place __cpu_setup in .text
  arm64: cmpxchg: Don't incldue linux/mmdebug.h
  arm64: mm: fold alternatives into .init
  ...

Pull m68knommu update from Greg Ungerer:
 "Only a single change, limiting the return values for coldfire gpio get
  function"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: coldfire/gpio: Be sure to clamp return value

Pull m68k updates from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Provide __phys_to_pfn() and __pfn_to_phys()
  m68k/atari, m68k/sun3: Fix SCSI platform device registration when driver is modular
  m68k/defconfig: Update defconfigs for v4.4-rc1
  m68k/mac: Kill psc_present

Pull MIPS fixes from Ralf Baechle:
 "This is the final pull request for MIPS for 4.4.  It fixes:

   - scripts/ld-version.sh parsing of ld version numbers that contain
     large numbers as components.
   - fix parsing of version numbers as used by Fedora's ld.

  Currently scripts/ld-version.sh is only being used by MIPS"

[ This obviously missed 4.4, so getting merged now in the merge window
  for 4.5 instead ]

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  ld-version: Fix it on Fedora
  Fix ld-version.sh to handle large 3rd version part

vmx_cpuid_tries to update SECONDARY_VM_EXEC_CONTROL in the VMCS, but
it will cause a vmwrite error on older CPUs because the code does not
check for the presence of CPU_BASED_ACTIVATE_SECONDARY_CONTROLS.

This will get rid of the following trace on e.g. Core2 6600:

vmwrite error: reg 401e value 10 (err 12)
Call Trace:
[<ffffffff8116e2b9>] dump_stack+0x40/0x57
[<ffffffffa020b88d>] vmx_cpuid_update+0x5d/0x150 [kvm_intel]
[<ffffffffa01d8fdc>] kvm_vcpu_ioctl_set_cpuid2+0x4c/0x70 [kvm]
[<ffffffffa01b8363>] kvm_arch_vcpu_ioctl+0x903/0xfa0 [kvm]

Fixes: feda805f
Cc: stable@vger.kernel.org
Reported-by: Zdenek Kaspar <zkaspar82@gmail.com>
Signed-off-by: Huaitong Han <huaitong.han@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull device mapper updates from Mike Snitzer:

 - The most significant set of changes this cycle is the Forward Error
   Correction (FEC) support that has been added to the DM verity target.

   Google uses DM verity on all Android devices and it is believed that
   this FEC support will enable DM verity to recover from storage
   failures seen since DM verity was first deployed as part of Android.

 - A stable fix for a race in the destruction of DM thin pool's
   workqueue

 - A stable fix for hung IO if a DM snapshot copy hit an error

 - A few small cleanups in DM core and DM persistent data.

 - A couple DM thinp range discard improvements (address atomicity of
   finding a range and the efficiency of discarding a partially mapped
   thin device)

 - Add ability to debug DM bufio leaks by recording stack trace when a
   buffer is allocated.  Upon detected leak the recorded stack is
   dumped.

* tag 'dm-4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm snapshot: fix hung bios when copy error occurs
  dm thin: bump thin and thin-pool target versions
  dm thin: fix race condition when destroying thin pool workqueue
  dm space map metadata: remove unused variable in brb_pop()
  dm verity: add ignore_zero_blocks feature
  dm verity: add support for forward error correction
  dm verity: factor out verity_for_bv_block()
  dm verity: factor out structures and functions useful to separate object
  dm verity: move dm-verity.c to dm-verity-target.c
  dm verity: separate function for parsing opt args
  dm verity: clean up duplicate hashing code
  dm btree: factor out need_insert() helper
  dm bufio: use BUG_ON instead of conditional call to BUG
  dm bufio: store stacktrace in buffers to help find buffer leaks
  dm bufio: return NULL to improve code clarity
  dm block manager: cleanup code that prints stacktrace
  dm: don't save and restore bi_private
  dm thin metadata: make dm_thin_find_mapped_range() atomic
  dm thin metadata: speed up discard of partially mapped volumes

Pull media updates from Mauro Carvalho Chehab:
 "The part of patches for Kernel 4.5.  There's nothing really big here:

   - driver-specific headers for media devices were moved to separate
     directories, in order to make clear what headers belong to the core
     kABI and require documentation

   - Platform data for media drivers were moved from include/media to
     include/linux/platform_data/media

   - add a driver for cs3308 8-channel volume control, used on some
     high-end capture boards

   - lirc.h kAPI header were added at include/uapi/linux

   - Driver cleanups, new board additions and improvements"

* tag 'media/v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (204 commits)
  [media] rc: sunxi-cir: Initialize the spinlock properly
  [media] rtl2832: do not filter out slave TS null packets
  [media] rtl2832: print reg number on error case
  [media] rtl28xxu: return demod reg page from driver cache
  [media] coda: enable MPEG-2 ES decoding
  [media] coda: don't start streaming without queued buffers
  [media] coda: hook up vidioc_prepare_buf
  [media] coda: relax coda_jpeg_check_buffer for trailing bytes
  [media] coda: make to_coda_video_device static
  [media] s5p-mfc: remove volatile attribute from MFC register addresses
  [media] s5p-mfc: merge together s5p_mfc_hw_call and s5p_mfc_hw_call_void
  [media] s5p-mfc: use spinlock to protect MFC context
  [media] s5p-mfc: remove unnecessary callbacks
  [media] s5p-mfc: make queue cleanup code common
  [media] s5p-mfc: use one implementation of s5p_mfc_get_new_ctx
  [media] s5p-mfc: constify s5p_mfc_codec_ops structures
  [media] au8522: Avoid memory leak for device config data
  [media] ir-lirc-codec.c: don't leak lirc->drv-rbuf
  [media] uvcvideo: small cleanup in uvc_video_clock_update()
  [media] uvcvideo: Fix reading the current exposure value of UVC
  ...

Pull LED subsystem updates from Jacek Anaszewski:
 "Besides regular driver updates, we introduce a portion of LED core
  improvements, that allow to avoid the need for using work queues in
  the LED class drivers, that set brightness in a blocking way.

  Affected LED class drivers are being optimized accordingly.

   - LED core improvements:
        - use EXPORT_SYMBOL_GPL consistently,
        - add two new LED_BLINK_ flags,
        - rename brightness_set_sync op to brightness_set_blocking,
        - add led_set_brightness_nosleep{nopm} functions,
        - use set_brightness_work for the blocking op,
        - drivers shouldn't enforce SYNC/ASYNC brightness setting,
        - turn off the LED and wait for completion on unregistering LED
          class device,
        - add managed version of led_trigger_register,
        - add description of brightness setting API to the LED class doc.

   - Remove work queues from drivers: leds-tlc591xx, leds-88pm860x, leds-adp5520,
        leds-bd2802, leds-blinkm, leds-lm3533, leds-lm3642, leds-pca9532,
        leds-lp3944, leds-lp55xx, leds-lp8788, leds-lp8860, leds-pca955x,
        leds-pca963x, leds-wm831x, leds-da903x, leds-da9052, leds-dac124d085,
        leds-lt3593, leds-max8997, leds-mc13783, leds-regulator, leds-wm8350,
        leds-max77693, leds-aat1290, leds-ktd2692, leds-gpio, leds-pwm,
        leds-lm355x, leds-ns2.

   - Replace brightness_set op with a new brightness_set_blocking op to
     make the drivers compatible with led triggers: leds-ipaq-micro,
     leds-powernv.

   - Add missing of_node_put: leds-ktd2692, leds-aat1290, leds-max77693.

   - Make the driver explicitly non-modular: ledtrig-cpu,
     ledtrig-ide-disk, leds-syscon.

   - Improvements to leds-bcm6328:
        - reuse bcm6328_led_set() instead of copying its functionality,
        - swap LED ON and OFF definitions,
        - improve blink support,
        - simplify duplicated unlock in bcm6328_blink_set,
        - add little endian support,
        - remove unneded lock when checking initial LED status,
        - add HAS_IOMEM dependency,
        - code cleaning.

   - Improvements to leds-bcm6358:
        - use bcm6358_led_set() in order to get rid of the lock,
        - merge bcm6358_led_mode and bcm6358_led_set,
        - add little endian support,
        - remove unneded lock when checking initial LED status,
        - add HAS_IOMEM dependency,
        - remove unneeded busy status check.

   - Call led_pwm_set() in leds-pwm to enforce default LED_OFF.

   - Fix duration to be msec instead of jiffies: ledtrig-transient.

   - Removing NULL check: leds-powernv.

   - Use platform_register/unregister_drivers(): leds-sunfire.

   - Fix module license specification: ledtrig-oneshot.

   - Fix driver description and make license match the header: leds-pwm.

   - Remove checking for state < 1 in flash_strobe_store():
     led-class-flash.

   - Use led_set_brightness_sync for torch brightness:
     v4l2-flash-led-class"

* tag 'leds-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (68 commits)
  leds: add HAS_IOMEM dependency to LEDS_BCM6328/LEDS_BCM6358
  leds: core: add managed version of led_trigger_register
  leds: bcm6358: remove unneeded busy status check
  leds: bcm6328: improve blink support
  leds: bcm6358: merge bcm6358_led_mode and bcm6358_led_set
  leds: bcm6328: simplify duplicated unlock in bcm6328_blink_set
  leds: bcm6358: add little endian support
  leds: bcm6328: add little endian support
  leds: bcm6358: remove unneded lock when checking initial LED status
  leds: bcm6358: Use bcm6358_led_set() in order to get rid of the lock
  leds: bcm6328: remove unneded lock when checking initial LED
  leds: bcm6328: code cleaning
  leds: syscon: Make the driver explicitly non-modular
  leds: ledtrig-ide-disk: Make the driver explicitly non-modular
  leds: ledtrig-cpu: Make the driver explicitly non-modular
  leds: sunfire: Use platform_register/unregister_drivers()
  leds: max77693: Add missing of_node_put
  leds: aat1290: Add missing of_node_put
  leds: powernv: Implement brightness_set_blocking op
  leds: ipaq-micro: Implement brightness_set_blocking op
  ...

Pull EDAC updates from Borislav Petkov:

 - hide EDAC workqueue from users (Borislav Petkov)

 - edac_subsys init/teardown cleanup (Borislav Petkov)

 - make mpc85xx-pci-edac a platform device (Scott Wood)

 - sb_edac KNL gen2 support (Jim Snow)

 - other small cleanups all over the place

* tag 'edac_for_4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, i5100: Use to_delayed_work()
  MAINTAINERS: Fix EDAC repo URLs format
  EDAC, sb_edac: Set fixed DIMM width on Xeon Knights Landing
  EDAC: Rework workqueue handling
  EDAC: Make edac_device workqueue setup/teardown functions static
  EDAC: Remove edac_get_sysfs_subsys() error handling
  EDAC: Unexport and make edac_subsys static
  EDAC: Rip out the edac_subsys reference counting
  EDAC: Robustify workqueues destruction
  EDAC, mc_sysfs: Fix freeing bus' name
  EDAC, mpc85xx: Make mpc85xx-pci-edac a platform device
  EDAC, sb_edac: Add Knights Landing (Xeon Phi gen 2) support
  EDAC, sb_edac: Add support for duplicate device IDs
  EDAC, sb_edac: Virtualize several hard-coded functions
  EDAC, mv64x60: Use platform_register/unregister_drivers()
  EDAC, mpc85xx: Use platform_register/unregister_drivers()
  EDAC: Add DDR4 flag
  EDAC: Remove references to bluesmoke.sourceforge.net
  EDAC, pci: Remove old disabled code

Merge tag 'hwmon-for-linus-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "Notable hwmon changes:

   - Add basic support for NCT6683 on Mitac boards
   - Add support for AMD new 15h processors to fam15h_power driver
   - Add pmbus client driver for LTC3815
   - Remove htu21 driver (now supported by iio subsystem)"

* tag 'hwmon-for-linus-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (nct6683) Add basic support for NCT6683 on Mitac boards
  hwmon: (ibmaem) constify aem_rw_sensor_template and aem_ro_sensor_template structures
  hwmon: (nct6683,nct6775) constify sensor_template_group structures
  MAINTAINERS: change the maintainer of fam15h_power driver
  hwmon: (fam15h_power) Add support for AMD new 15h processors
  hwmon: (pmbus) Add client driver for LTC3815
  hwmon: (htu21) Remove driver

Pull regmap updates from Mark Brown:
 "There's no real overall theme to the regmap changes for this release,
  it's a collection of individual features.  The main bits are:

   - Support for 64 bit registers, mainly for MMIO use, from Xiubo Li.

   - Support for trigger type configuration for regmap-irq from Laxman
     Dewangan.

   - Use native physical I/O for MMIO register maps to avoid confusion
     with the conversions that readl() and writel() do to little endian
     on big endian systems (with some DT updates to fix some workarounds
     people were doing), code from Simon Arlott.

   - Use a binary search rather than iteraton to improve the runtime
     performance of the rbtree code from Nikesh Oswal"

* tag 'regmap-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: debugfs: Use seq_file for the access map
  regmap: irq: add support for configuration of trigger type
  regmap: use IS_ALIGNED instead of % to improve the performance
  regmap: cache: Move the num_reg_defaults check as early as possible
  regmap: cache: Add warning info for the cache check
  regmap: missing case statement
  regmap: shift wrapping bugs in 64 bit code
  regmap: cache: Add 64-bit mode support
  regmap: cache: To suppress the noise of checkpatch
  regmap: fix the warning about unused variable
  regmap: add 64-bit mode support
  regmap: mmio: Add regmap_mmio_get_min_stride
  regmap: mmio: remove the useless code
  regmap: Fix leftover from struct reg_default to struct reg_sequence change
  regmap: replace kmalloc with kmalloc_array
  regmap: replace kzalloc with kcalloc
  regmap: rbtree: When adding a reg do a bsearch for target node
  regmap-mmio: Use native endianness for read/write

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control patches for the v4.5 series.

  Notably I have a patch to driver core from Stephen Boyd in the pull
  request, this has been ACKed by Greg so it should be OK.  The internal
  API needed some tweaking to allow modular Qualcomm pin controllers.

  There is a bit of development history in here but it should all add up
  nicely and has boiled in linux-next.  For example I merged in v4.4-rc5
  to get rid of some nasty merge conflicts.

  Summary:

   - New drivers:
      - PXA2xx pin controller support
      - Broadcom NSP pin controller support

   - New subdrivers:
      - Samsung EXYNOS5410 support
      - Qualcomm MSM8996 support
      - Qualcomm PM8994 support
      - Qualcomm PM8994 MPP support
      - Allwinner sunxi H3 support
      - Allwinner sunxi A80 support
      - Rockchip RK3228 support

   - Rename the Cygnus pinctrl driver to "iproc" as it is more generic
     than was originally thought.

   - A bunch of Lantiq/Xway updates especially from the OpenWRT people.

   - Several refactorings for the Super-H SH PFC pin controllers.
     Adding SCIF_CLK support.

   - Several fixes to the Atlas 7 driver.

   - Various fixes all over the place"

* tag 'pinctrl-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits)
  pinctrl: mediatek: Modify pinctrl bindings for mt2701
  Revert "pinctrl: qcom: make PMIC drivers bool"
  pinctrl: qcom: Use platform_irq_count() instead of of_irq_count()
  driver-core: platform: Add platform_irq_count()
  pinctrl: lantiq: 2 pins have the wrong mux list
  pinctrl: qcom: make PMIC drivers bool
  pinctrl: nsp-gpio: forever loop in nsp_gpio_get_strength()
  pinctrl: mediatek: convert to arch_initcall
  pinctrl: bcm2835: Fix memory leak in error path
  pinctrl: mediatek: add missing of_node_put
  pinctrl: rockchip: add missing of_node_put
  pinctrl: sh-pfc: add missing of_node_put
  pinctrl: sirf: add missing of_node_put
  pinctrl-tegra: add missing of_node_put
  pinctrl: sunxi: Add A80 special pin controller
  pinctrl: bcm/cygnys/iproc: fixup rebase issue
  pinctrl: fixup problematic flag
  MAINTAINERS: Add co-maintainer for Renesas Pin Controllers
  pinctrl: sh-pfc: r8a7791: add EtherAVB pin groups
  pinctrl: sh-pfc: r8a7795: Add SATA support
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Optimize boot time by detecting cards simultaneously
   - Make runtime resume default behavior for MMC/SD
   - Enable MMC/SD/SDIO devices to suspend/resume asynchronously
   - Allow more than 8 partitions per card
   - Introduce MMC_CAP2_NO_SDIO to prevent unsupported SDIO commands
   - Support the standard DT wakeup-source property
   - Fix driver strength switching for HS200 and HS400
   - Fix switch command timeout
   - Fix invalid vdd in voltage switch power cycle for SDIO

  MMC host:
   - sdhci: Restore behavior when setting VDD via external regulator
   - sdhci: A couple of changes/fixes related to the dma support
   - sdhci-tegra: Add Tegra210 support
   - sdhci-tegra: Support for UHS-I cards including tuning support
   - sdhci-of-at91: Add PM support
   - sh_mmcif: Rework dma channel handling
   - mvsdio: Delete platform data code path"

* tag 'mmc-v4.5' of git://git.linaro.org/people/ulf.hansson/mmc: (52 commits)
  mmc: dw_mmc: remove the unused quirks
  mmc: sdhci-pci: use to_pci_dev()
  mmc: cb710: use to_platform_device()
  mmc: tegra: use correct accessor for misc ctrl register
  mmc: tegra: enable UHS-I modes
  mmc: tegra: implement UHS tuning
  mmc: tegra: disable SPI_MODE_CLKEN
  mmc: tegra: implement module external clock change
  mmc: sdhci: restore behavior when setting VDD via external regulator
  mmc: It is not an error for the card to be removed while suspended
  mmc: block: Allow more than 8 partitions per card
  mmc: core: Optimize boot time by detecting cards simultaneously
  mmc: dw_mmc: use resource_size_t to store physical address
  mmc: core: fix __mmc_switch timeout caused by preempt
  mmc: usdhi6rol0: handle NULL data in timeout
  mmc: of_mmc_spi: Add IRQF_ONESHOT to interrupt flags
  mmc: mediatek: change some dev_err to dev_dbg
  mmc: enable MMC/SD/SDIO device to suspend/resume asynchronously
  mmc: sdhci: Fix sdhci_runtime_pm_bus_on/off()
  mmc: sdhci: 64-bit DMA actually has 4-byte alignment
  ...

Pull libata updates from Tejun Heo:
 "Mostly low level driver specific changes.

  Two changes are somewhat noteworthy.  First, Dan's patchset to support
  per-port msix interrupt handling for ahci, which was tried last cycle
  but had to be backed out due to a couple issues, is back and seems to
  be working fine.  Second, libata exception handling now uses
  usleep_range() instead of msleep() for sleeps < 20ms which can make
  things snappier in some corner cases"

* 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: skip debounce delay on link resume
  ata: ahci_brcmstb: disable DIPM support
  ata: ahci_brcmstb: enable support for ALPM
  drivers: libata-core: Use usleep_range() instead of msleep() for short sleeps (<20 ms)
  sata_sx4: correctly handling failed allocation
  ata: ahci_brcmstb: add support for MIPS-based platforms
  ahci: qoriq: Adjust the default register values on ls1021a
  ahci: qoriq: Update the default Rx watermark value
  ahci: qoriq: Adjust the default register values on ls1043a
  ahci: compile out msi/msix infrastructure
  ata: core: fix irq description on AHCI single irq systems
  ata: ahci_brcmstb: remove unused definitions
  ata: ahci_brcmstb: add a quirk for MIPS-based platforms
  ata: ahci_brcmstb: disable NCQ for MIPS-based platforms
  ata: sata_rcar: Remove obsolete platform_device_id entries
  sata_rcar: Add compatible string for r8a7795
  ahci: kill 'intr_status'
  ahci: switch from 'threaded' to 'hardirq' interrupt handling
  ahci: per-port msix support

Pull percpu updates from Tejun Heo:
 "Two trivial percpu patches for v4.5-rc1"

* 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: remove PERCPU_ENOUGH_ROOM which is stale definition
  percpu: Remove unneeded return from void function

Pull workqueue update from Tejun Heo:
 "Workqueue changes for v4.5.  One cleanup patch and three to improve
  the debuggability.

  Workqueue now has a stall detector which dumps workqueue state if any
  worker pool hasn't made forward progress over a certain amount of time
  (30s by default) and also triggers a warning if a workqueue which can
  be used in memory reclaim path tries to wait on something which can't
  be.

  These should make workqueue hangs a lot easier to debug."

* 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: simplify the apply_workqueue_attrs_locked()
  workqueue: implement lockup detector
  watchdog: introduce touch_softlockup_watchdog_sched()
  workqueue: warn if memory reclaim tries to flush !WQ_MEM_RECLAIM workqueue

Pull irq updates from Thomas Gleixner:
 "The irq department provides:

   - Support for MSI to wire bridges and a first user of it

   - More ACPI support for ARM/GIC

   - A new TS-4800 interrupt controller driver

   - RCU based free of interrupt descriptors to support the upcoming
     Intel VMD technology without introducing a locking nightmare

   - The usual pile of fixes and updates to drivers and core code"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  irqchip/omap-intc: Add support for spurious irq handling
  irqchip/zevio: Use irq_data_get_chip_type() helper
  irqchip/omap-intc: Remove duplicate setup for IRQ chip type handler
  irqchip/ts4800: Add TS-4800 interrupt controller
  irqchip/ts4800: Add documentation for TS-4800 interrupt controller
  irq/platform-MSI: Increase the maximum MSIs the MSI framework can support
  irqchip/gicv2m: Miscellaneous fixes for v2m resources and SPI ranges
  irqchip/bcm2836: Make code more readable
  irqchip/bcm2836: Tolerate IRQs while no flag is set in ISR
  irqchip/bcm2836: Add SMP support for the 2836
  irqchip/bcm2836: Fix initialization of the LOCAL_IRQ_CNT timers
  irqchip/gic-v2m: acpi: Introducing GICv2m ACPI support
  irqchip/gic-v2m: Refactor to prepare for ACPI support
  irqdomain: Introduce is_fwnode_irqchip helper
  acpi: pci: Setup MSI domain for ACPI based pci devices
  genirq/msi: Export functions to allow MSI domains in modules
  irqchip/mbigen: Implement the mbigen irq chip operation functions
  irqchip/mbigen: Create irq domain for each mbigen device
  irqchip/mgigen: Add platform device driver for mbigen device
  dt-bindings: Documents the mbigen bindings
  ...

Merge branches 'timers-core-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates - and a leftover fix - from Thomas Gleixner:
 "A rather large (commit wise) update from the timer side:

   - A bulk update to make compile tests work in the clocksource drivers

   - An overhaul of the h8300 timers

   - Some more Y2038 work

   - A few overflow prevention checks in the timekeeping/ntp code

   - The usual pile of fixes and improvements to the various
     clocksource/clockevent drivers and core code"

Also:
 "A single fix for the posix-clock poll code which did not make it into
  4.4"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
  clocksource/drivers/acpi_pm: Convert to pr_* macros
  clocksource: Make clocksource validation work for all clocksources
  timekeeping: Cap adjustments so they don't exceed the maxadj value
  ntp: Fix second_overflow's input parameter type to be 64bits
  ntp: Change time_reftime to time64_t and utilize 64bit __ktime_get_real_seconds
  timekeeping: Provide internal function __ktime_get_real_seconds
  clocksource/drivers/h8300: Use ioread / iowrite
  clocksource/drivers/h8300: Initializer cleanup.
  clocksource/drivers/h8300: Simplify delta handling
  clocksource/drivers/h8300: Fix timer not overflow case
  clocksource/drivers/h8300: Change to overflow interrupt
  clocksource/drivers/lpc32: Correct pr_err() output format
  clocksource/drivers/arm_global_timer: Fix suspend resume
  clocksource/drivers/pistachio: Fix wrong calculated clocksource read value
  clockevents/drivers/arm_global_timer: Use writel_relaxed in gt_compare_set
  clocksource/drivers/dw_apb_timer: Inline apbt_readl and apbt_writel
  clocksource/drivers/dw_apb_timer: Use {readl|writel}_relaxed in critical path
  clocksource/drivers/dw_apb_timer: Fix apbt_readl return types
  clocksource/drivers/tango-xtal: Replace code by clocksource_mmio_init
  clocksource/drivers/h8300: Increase the compilation test coverage
  ...

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-clock: Fix return code on the poll method's error path