Namespaces may be dynamically allocated and deleted or attached and
detached. This has the driver rescan the device for namespace changes
after each device reset or namespace change asynchronous event.

There could potentially be many detached namespaces that we don't want
polluting /dev/ with unusable block handles, so this will delete disks
if the namespace is not active as indicated by the response from identify
namespace. This also skips adding the disk if no capacity is provisioned
to the namespace in the first place.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

We export this function and NVMe wants to use it, but for some reason
it was never added to the block header. Do that.
Signed-off-by: Jens Axboe <axboe@fb.com>

Protects against reordering and/or preempting which would allow the
kthread to access the queue descriptor before it is set up
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

We need the ability to perform an nvme controller reset as discussed on
the mailing list thread:

  http://lists.infradead.org/pipermail/linux-nvme/2015-March/001585.html

This adds a sysfs entry that when written to will reset perform an NVMe
controller reset if the controller was successfully initialized in the
first place.

This also adds locking around resetting the device in the async probe
method so the driver can't schedule two resets.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Cc: Brandon Schultz <brandon.schulz@hgst.com>
Cc: David Sariel <david.sariel@pmcs.com>

Updated by Jens to:

1) Merge this with the ioctl reset patch from David Sariel. The ioctl
   path now shares the reset code from the sysfs path.

2) Don't flush work if we fail issuing the reset.
Signed-off-by: Jens Axboe <axboe@fb.com>

When irqmode=2 (IRQ completion handler is timer) and queue_mode=1
(Block interface to use is rq), the completion handler should restart
request handling for any pending requests on a queue because request
processing stops when the number of commands are queued more than
hw_queue_depth (null_rq_prep_fn returns BLKPREP_DEFER).

Without this change, the following command cannot finish.

	# modprobe null_blk irqmode=2 queue_mode=1 hw_queue_depth=1
	# fio --name=t --rw=read --size=1g --direct=1 \
	  --ioengine=libaio --iodepth=64 --filename=/dev/nullb0
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

When irqmode=2 (IRQ completion handler is timer), timer handler should
be called on the same CPU where the timer has been started.

Since completion_queues are per-cpu and the completion handler only
touches completion_queue for local CPU, we need to prevent the handler
from running on a different CPU where the timer has been started.
Otherwise, the IO cannot be completed until another completion handler
is executed on that CPU.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

The driver needs to track shared tags to support multiple namespaces
that may be dynamically allocated or deleted. Relying on the first
request_queue's hctx's is not appropriate as we cannot clear outstanding
tags for all namespaces using this handle, nor can the driver easily track
all request_queue's hctx as namespaces are attached/detached. Instead,
this patch uses the nvme_dev's tagset to get the shared tag resources
instead of through a request_queue hctx.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Storage controllers may expose multiple block devices that share hardware
resources managed by blk-mq. This patch enhances the shared tags so a
low-level driver can access the shared resources not tied to the unshared
h/w contexts. This way the LLD can dynamically add and delete disks and
request queues without having to track all the request_queue hctx's to
iterate outstanding tags.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

We don't need to honor chunk sizes for IO that doesn't carry any
data.
Signed-off-by: Jens Axboe <axboe@fb.com>

We can safely merge anything that wont generate an SG list entry,
so if the bio is data-less (discard), don't look at potential
SG gaps.
Signed-off-by: Jens Axboe <axboe@fb.com>

Do not retry failed sync commands so the original status may be seen
without issuing unnecessary retries.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Remove unneeded variable used to store return value.

Generated by: scripts/coccinelle/misc/returnvar.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Jens Axboe <axboe@fb.com>

Replaces req->sense_len usage, which is not owned by the LLD, to
req->special to contain the command result for driver created commands,
and sets the result unconditionally on completion.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@fb.com>
Fixes: d29ec824 ("nvme: submit internal commands through the block layer")
Signed-off-by: Jens Axboe <axboe@fb.com>

Currently dm-multipath has to clone the bios for every request sent
to the lower devices, which wastes cpu cycles and ties down memory.

This patch instead adds a new REQ_CLONE flag that instructs req_bio_endio
to not complete bios attached to a request, which we set on clone
requests similar to bios in a flush sequence.  With this change I/O
errors on a path failure only get propagated to dm-multipath, which
can then either resubmit the I/O or complete the bios on the original
request.

I've done some basic testing of this on a Linux target with ALUA support,
and it survives path failures during I/O nicely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Commit c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for
non-chains") regressed all existing callers that followed this pattern:
 1) saving a bio's original bi_end_io
 2) wiring up an intermediate bi_end_io
 3) restoring the original bi_end_io from intermediate bi_end_io
 4) calling bio_endio() to execute the restored original bi_end_io

The regression was due to BIO_CHAIN only ever getting set if
bio_inc_remaining() is called.  For the above pattern it isn't set until
step 3 above (step 2 would've needed to establish BIO_CHAIN).  As such
the first bio_endio(), in step 2 above, never decremented __bi_remaining
before calling the intermediate bi_end_io -- leaving __bi_remaining with
the value 1 instead of 0.  When bio_inc_remaining() occurred during step
3 it brought it to a value of 2.  When the second bio_endio() was
called, in step 4 above, it should've called the original bi_end_io but
it didn't because there was an extra reference that wasn't dropped (due
to atomic operations being optimized away since BIO_CHAIN wasn't set
upfront).

Fix this issue by removing the __bi_remaining management complexity for
all callers that use the above pattern -- bio_chain() is the only
interface that _needs_ to be concerned with __bi_remaining.  For the
above pattern callers just expect the bi_end_io they set to get called!
Remove bio_endio_nodec() and also remove all bio_inc_remaining() calls
that aren't associated with the bio_chain() interface.

Also, the bio_inc_remaining() interface has been moved local to bio.c.

Fixes: c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for non-chains")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Use block layer queues with an internal cmd_type to submit internally
generated NVMe commands.  This both simplifies the code a lot and allow
for a better structure.  For example now the LighNVM code can construct
commands without knowing the details of the underlying I/O descriptors.
Or a future NVMe over network target could inject commands, as well as
could the SCSI translation and ioctl code be reused for such a beast.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

NVMe device always support the FUA bit, and the SCSI translations
accepts the DPO bit, which doesn't have much of a meaning for us.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Erorr handling for the scsi translation was completely broken, as there
were two different positive error number spaces overlapping.  Fix this
up by removing one of them, and centralizing the generation of the other
positive values in a single place.  Also fix up a few places that didn't
handle the NVMe error codes properly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

This function handles two totally different opcodes, so split it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Most users want the generic device, so store that in struct nvme_dev
instead of the pci_dev.  This also happens to be a nice step towards
making some code reusable for non-PCI transports.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Note that we keep the unused timeout argument, but allow callers to
pass 0 instead of a timeout if they want the default.  This will allow
adding a timeout to the pass through path later on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

gcc, righfully, complains:

drivers/block/loop.c:1369:1: warning: label 'out' defined but not used [-Wunused-label]

Kill it.
Signed-off-by: Jens Axboe <axboe@fb.com>

With the mutex_trylock bit gone from blkdev_reread_part(), the retry logic
in dasd_scan_partitions() shouldn't be necessary.

CC: Christoph Hellwig <hch@infradead.org>
CC: Jens Axboe <axboe@kernel.dk>
CC: Tejun Heo <tj@kernel.org>
CC: Alexander Viro <viro@zeniv.linux.org.uk>
CC: Markus Pargmann <mpa@pengutronix.de>
CC: Stefan Weinhuber <wein@de.ibm.com>
CC: Stefan Haberland <stefan.haberland@de.ibm.com>
CC: Sebastian Ott <sebott@linux.vnet.ibm.com>
CC: Fabian Frederick <fabf@skynet.be>
CC: Ming Lei <ming.lei@canonical.com>
CC: David Herrmann <dh.herrmann@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Peter Zijlstra <peterz@infradead.org>
CC: nbd-general@lists.sourceforge.net
CC: linux-s390@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Also remove the obsolete comment.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

loop_clr_fd() can be run piggyback with lo_release(), and
under this situation, reread partition may always fail because
bd_mutex has been held already.

This patch detects the situation by the reference count, and
call __blkdev_reread_part() to avoid acquiring the lock again.

In the meantime, this patch switches to new kernel APIs
of blkdev_reread_part() and __blkdev_reread_part().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

The lo_ctl_mutex is held for running all ioctl handlers, and
in some ioctl handlers, ioctl_by_bdev(BLKRRPART) is called for
rereading partitions, which requires bd_mutex.

So it is easy to cause failure because trylock(bd_mutex) may
fail inside blkdev_reread_part(), and follows the lock context:

blkid or other application:
	->open()
		->mutex_lock(bd_mutex)
		->lo_open()
			->mutex_lock(lo_ctl_mutex)

losetup(set fd ioctl):
	->mutex_lock(lo_ctl_mutex)
	->ioctl_by_bdev(BLKRRPART)
		->trylock(bd_mutex)

This patch trys to eliminate the ABBA lock dependency by removing
lo_ctl_mutext in lo_open() with the following approach:

1) make lo_refcnt as atomic_t and avoid acquiring lo_ctl_mutex in lo_open():
	- for open vs. add/del loop, no any problem because of loop_index_mutex
	- freeze request queue during clr_fd, so I/O can't come until
	  clearing fd is completed, like the effect of holding lo_ctl_mutex
	  in lo_open
	- both open() and release() have been serialized by bd_mutex already

2) don't hold lo_ctl_mutex for decreasing/checking lo_refcnt in
lo_release(), then lo_ctl_mutex is only required for the last release.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

We need the blkdev_reread_part() changes for drivers to adapt.

The only possible problem of using mutex_lock() instead of trylock
is about deadlock.

If there aren't any locks held before calling blkdev_reread_part(),
deadlock can't be caused by this conversion.

If there are locks held before calling blkdev_reread_part(),
and if these locks arn't required in open, close handler and I/O
path, deadlock shouldn't be caused too.

Both user space's ioctl(BLKRRPART) and md_setup_drive() from
init/do_mounts_md.c belongs to the 1st case, so the conversion is safe
for the two cases.

For loop, the previous patches in this pathset has fixed the ABBA lock
dependency, so the conversion is OK.

For nbd, tx_lock is held when calling the function:

	- both open and release won't hold the lock
	- when blkdev_reread_part() is run, I/O thread has been stopped
	already, so tx_lock won't be acquired in I/O path at that time.
	- so the conversion won't cause deadlock for nbd

For dasd, both dasd_open(), dasd_release() and request function don't
acquire any mutex/semphone, so the conversion should be safe.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

This patch exports blkdev_reread_part() for block drivers, also
introduce __blkdev_reread_part().

For some drivers, such as loop, reread of partitions can be run
from the release path, and bd_mutex may already be held prior to
calling ioctl_by_bdev(bdev, BLKRRPART, 0), so introduce
__blkdev_reread_part for use in such cases.

CC: Christoph Hellwig <hch@lst.de>
CC: Jens Axboe <axboe@kernel.dk>
CC: Tejun Heo <tj@kernel.org>
CC: Alexander Viro <viro@zeniv.linux.org.uk>
CC: Markus Pargmann <mpa@pengutronix.de>
CC: Stefan Weinhuber <wein@de.ibm.com>
CC: Stefan Haberland <stefan.haberland@de.ibm.com>
CC: Sebastian Ott <sebott@linux.vnet.ibm.com>
CC: Fabian Frederick <fabf@skynet.be>
CC: Ming Lei <ming.lei@canonical.com>
CC: David Herrmann <dh.herrmann@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Peter Zijlstra <peterz@infradead.org>
CC: nbd-general@lists.sourceforge.net
CC: linux-s390@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Stop abusing struct page functionality and the swap end_io handler, and
instead add a modified version of the blk-lib.c bio_batch helpers.

Also move the block I/O code into swap.c as they are directly tied into
each other.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Ming Lin <mlin@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Jens Axboe <axboe@fb.com>

Various previous patches removed bits and left holes, collapse them
all. Leave the reset start bit where it is, we don't need to change
that.
Signed-off-by: Jens Axboe <axboe@fb.com>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>

Since the big barrier rewrite/removal in 2007 we never fail FLUSH or
FUA requests, which means we can remove the magic BIO_EOPNOTSUPP flag
to help propagating those to the buffer_head layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>