- 11 Oct, 2024 11 commits
-
-
Kalesh AP authored
In bnxt_re_add_device(), when register netdev notifier fails, driver is not unregistering the IB device in the error cleanup path. Also, removed the duplicate cleanup in error path of bnxt_re_probe. Fixes: 94a9dc6a ("RDMA/bnxt_re: Group all operations under add_device and remove_device") Link: https://patch.msgid.link/r/1728373302-19530-8-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com>
-
Selvin Xavier authored
Driver waits indefinitely for the fifo occupancy to go below a threshold as soon as the pacing interrupt is received. This can cause soft lockup on one of the processors, if the rate of DB is very high. Add a loop count for FPGA and exit the __wait_for_fifo_occupancy_below_th if the loop is taking more time. Pacing will be continuing until the occupancy is below the threshold. This is ensured by the checks in bnxt_re_pacing_timer_exp and further scheduling the work for pacing based on the fifo occupancy. Fixes: 2ad4e630 ("RDMA/bnxt_re: Implement doorbell pacing algorithm") Link: https://patch.msgid.link/r/1728373302-19530-7-git-send-email-selvin.xavier@broadcom.comReviewed-by:
Chandramohan Akula <chandramohan.akula@broadcom.com> Signed-off-by:
-
Kalesh AP authored
There is a possibility of a NULL pointer dereference in the failure path of bnxt_re_add_device(). To address that, moved the update of "rdev->adev" to bnxt_re_dev_add(). Fixes: dee3da34 ("RDMA/bnxt_re: Change aux driver data to en_info to hold more information") Link: https://patch.msgid.link/r/1728373302-19530-6-git-send-email-selvin.xavier@broadcom.comReported-by:
Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-rdma/CAH-L+nMCwymKGqf5pd8-FZNhxEkDD=kb6AoCaE6fAVi7b3e5Qw@mail.gmail.com/T/#tSigned-off-by:
-
Kalesh AP authored
When the HWRM command fails, driver currently returns -EFAULT(Bad address). This does not look correct. Modified to return -EIO(I/O error). Fixes: cc1ec769 ("RDMA/bnxt_re: Fixing the Control path command and response handling") Fixes: 65288a22 ("RDMA/bnxt_re: use shadow qd while posting non blocking rcfw command") Link: https://patch.msgid.link/r/1728373302-19530-5-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
-
Kashyap Desai authored
Currently driver is not getting correct srq. Dereference only if qplib has a valid srq. Fixes: b02fd3f7 ("RDMA/bnxt_re: Report async events and errors") Link: https://patch.msgid.link/r/1728373302-19530-4-git-send-email-selvin.xavier@broadcom.comReviewed-by:
Saravanan Vajravel <saravanan.vajravel@broadcom.com> Reviewed-by:
Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
-
Kalesh AP authored
Driver exports pacing stats only on GenP5 and P7 adapters. But while parsing the pacing stats, driver has a check for "rdev->dbr_pacing". This caused a trace when KASAN is enabled. BUG: KASAN: slab-out-of-bounds in bnxt_re_get_hw_stats+0x2b6a/0x2e00 [bnxt_re] Write of size 8 at addr ffff8885942a6340 by task modprobe/4809 Fixes: 8b6573ff ("bnxt_re: Update the debug counters for doorbell pacing") Link: https://patch.msgid.link/r/1728373302-19530-3-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
-
Abhishek Mohapatra authored
Older adapters doesn't support the MAX CQ WQEs reported by older FW. So restrict the value reported to 1M always for older adapters. Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://patch.msgid.link/r/1728373302-19530-2-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Abhishek Mohapatra<abhishek.mohapatra@broadcom.com> Reviewed-by:
-
Bart Van Assche authored
Since commit 4c395296 ("slab: Warn on duplicate cache names when DEBUG_VM=y"), slab complains about duplicate cache names. Hence this patch. The approach is as follows: - Maintain an xarray with the slab size as index and a reference count and a kmem_cache pointer as contents. Use srpt-${slab_size} as kmem cache name. - Use 512-byte alignment for all slabs instead of only for some of the slabs. - Increment the reference count instead of calling kmem_cache_create(). - Decrement the reference count instead of calling kmem_cache_destroy(). Fixes: 5dabcd04 ("RDMA/srpt: Add support for immediate data") Link: https://patch.msgid.link/r/20241009210048.4122518-1-bvanassche@acm.orgReported-by:
Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Closes: https://lore.kernel.org/linux-block/xpe6bea7rakpyoyfvspvin2dsozjmjtjktpph7rep3h25tv7fb@ooz4cu5z6bq6/Suggested-by:
Bart Van Assche <bvanassche@acm.org> Tested-by:
-
Alexander Zubkov authored
There is "accept*" misspelled as "accpet*" in the comments. Fix the spelling. Fixes: 146b9756 ("RDMA/irdma: Add connection manager") Link: https://patch.msgid.link/r/20241008161913.19965-1-green@qrator.netSigned-off-by:
Alexander Zubkov <green@qrator.net> Signed-off-by:
-
Anumula Murali Mohan Reddy authored
ip_dev_find() always returns real net_device address, whether traffic is running on a vlan or real device, if traffic is over vlan, filling endpoint struture with real ndev and an attempt to send a connect request will results in RDMA_CM_EVENT_UNREACHABLE error. This patch fixes the issue by using vlan_dev_real_dev(). Fixes: 830662f6 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address") Link: https://patch.msgid.link/r/20241007132311.70593-1-anumula@chelsio.comSigned-off-by:
Anumula Murali Mohan Reddy <anumula@chelsio.com> Signed-off-by:
Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by:
-
Showrya M N authored
While running ISER over SIW, the initiator machine encounters a warning from skb_splice_from_iter() indicating that a slab page is being used in send_page. To address this, it is better to add a sendpage_ok() check within the driver itself, and if it returns 0, then MSG_SPLICE_PAGES flag should be disabled before entering the network stack. A similar issue has been discussed for NVMe in this thread: https://lore.kernel.org/all/20240530142417.146696-1-ofir.gal@volumez.com/ WARNING: CPU: 0 PID: 5342 at net/core/skbuff.c:7140 skb_splice_from_iter+0x173/0x320 Call Trace: tcp_sendmsg_locked+0x368/0xe40 siw_tx_hdt+0x695/0xa40 [siw] siw_qp_sq_process+0x102/0xb00 [siw] siw_sq_resume+0x39/0x110 [siw] siw_run_sq+0x74/0x160 [siw] kthread+0xd2/0x100 ret_from_fork+0x34/0x40 ret_from_fork_asm+0x1a/0x30 Link: https://patch.msgid.link/r/20241007125835.89942-1-showrya@chelsio.comSigned-off-by:
Showrya M N <showrya@chelsio.com> Signed-off-by:
-
- 08 Oct, 2024 6 commits
-
-
Anumula Murali Mohan Reddy authored
If traffic is over vlan, cma_validate_port() fails to match vlan net_device ifindex with bound_if_index and results in ENODEV error. It is because rdma_copy_src_l2_addr() always assigns bound_if_index with real net_device ifindex. This patch fixes the issue by assigning bound_if_index with vlan net_device index if traffic is over vlan. Fixes: f8ef1be8 ("RDMA/cma: Avoid GID lookups on iWARP devices") Signed-off-by:
Leon Romanovsky <leon@kernel.org>
-
Qianqiang Liu authored
nlmsg_put() may return a NULL pointer assigned to nlh, which will later be dereferenced in nlmsg_end(). Fixes: 9cbed5aa ("RDMA/nldev: Add support for RDMA monitoring") Link: https://patch.msgid.link/r/Zva71Yf3F94uxi5A@iZbp1asjb3cy8ks0srf007ZSigned-off-by:
Qianqiang Liu <qianqiang.liu@163.com> Signed-off-by:
-
Selvin Xavier authored
max_sw_wqe used for static wqe mode should be same as the max_wqe. Calculate the max_sw_wqe only for the variable WQE mode. Fixes: de1d364c ("RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters") Link: https://patch.msgid.link/r/1726715161-18941-7-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
-
Kalesh AP authored
__alloc_pbl() can return error when memory allocation fails. Driver is not checking the status on one of the instances. Fixes: 0c4dcd60 ("RDMA/bnxt_re: Refactor hardware queue memory allocation") Link: https://patch.msgid.link/r/1726715161-18941-4-git-send-email-selvin.xavier@broadcom.comReviewed-by:
-
Saravanan Vajravel authored
Driver uses internal data structure to construct WQE frame. It used avid type as u16 which can accommodate up to 64K AVs. When outstanding AVID crosses 64K, driver truncates AVID and hence it uses incorrect AVID to WR. This leads to WR failure due to invalid AV ID and QP is moved to error state with reason set to 19 (INVALID AVID). When RDMA CM path is used, this issue hits QP1 and it is moved to error state Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://patch.msgid.link/r/1726715161-18941-3-git-send-email-selvin.xavier@broadcom.comReviewed-by:
-
Kalesh AP authored
In bnxt_re_setup_chip_ctx() when bnxt_qplib_map_db_bar() fails driver is not freeing the memory allocated for "rdev->chip_ctx". Fixes: 0ac20faf ("RDMA/bnxt_re: Reorg the bar mapping") Link: https://patch.msgid.link/r/1726715161-18941-2-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
-
- 06 Oct, 2024 20 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Move non-boot built-in DTBs to the .rodata section - Fix Kconfig bugs - Fix maint scripts in the linux-image Debian package - Import some list macros to scripts/include/ * tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: deb-pkg: Remove blank first line from maint scripts kbuild: fix a typo dt_binding_schema -> dt_binding_schemas scripts: import more list macros kconfig: qconf: fix buffer overflow in debug links kconfig: qconf: move conf_read() before drawing tree pain kconfig: clear expr::val_is_valid when allocated kconfig: fix infinite loop in sym_calc_choice() kbuild: move non-boot built-in DTBs to .rodata section
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake laptops - Intel Diamond Rapids hw-id additions - Documentation and MAINTAINERS fixes - Some other small fixes * tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors platform/x86: wmi: Update WMI driver API documentation platform/x86: dell-ddv: Fix typo in documentation platform/x86: dell-sysman: add support for alienware products platform/x86/intel: power-domains: Add Diamond Rapids support platform/x86: ISST: Add Diamond Rapids to support list platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake platform/x86: dell-laptop: Do not fail when encountering unsupported batteries MAINTAINERS: Update Intel In Field Scan(IFS) entry platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "ARM64: - Fix pKVM error path on init, making sure we do not change critical system registers as we're about to fail - Make sure that the host's vector length is at capped by a value common to all CPUs - Fix kvm_has_feat*() handling of "negative" features, as the current code is pretty broken - Promote Joey to the status of official reviewer, while James steps down -- hopefully only temporarly x86: - Fix compilation with KVM_INTEL=KVM_AMD=n - Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use Selftests: - Fix compilation on non-x86 architectures" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: x86/reboot: emergency callbacks are now registered by common KVM code KVM: x86: leave kvm.ko out of the build if no vendor module is requested KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU KVM: arm64: Fix kvm_has_feat*() handling of negative features KVM: selftests: Fix build on architectures other than x86_64 KVM: arm64: Another reviewer reshuffle KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path -
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fix from Michael Ellerman: - Allow r30 to be used in vDSO code generation of getrandom Thanks to Jason A. Donenfeld * tag 'powerpc-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/vdso: allow r30 in vDSO code generation of getrandom
-
Aaron Thompson authored
The blank line causes execve() to fail: # strace ./postinst execve("./postinst", ...) = -1 ENOEXEC (Exec format error) strace: exec: Exec format error +++ exited with 1 +++ However running the scripts via shell does work (at least with bash) because the shell attempts to execute the file as a shell script when execve() fails. Fixes: b611daae ("kbuild: deb-pkg: split image and debug objects staging out into functions") Signed-off-by:Aaron Thompson <dev@aaront.org> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Nicolas Schier <nicolas@fjasle.eu> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Xu Yang authored
If we follow "make help" to "make dt_binding_schema", we will see below error: $ make dt_binding_schema make[1]: *** No rule to make target 'dt_binding_schema'. Stop. make: *** [Makefile:224: __sub-make] Error 2 It should be a typo. So this will fix it. Fixes: 604a57ba ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json") Signed-off-by:
Xu Yang <xu.yang_2@nxp.com> Reviewed-by:
Nicolas Schier <n.schier@avm.de> Signed-off-by:
-
Sami Tolvanen authored
Import list_is_first, list_is_last, list_replace, and list_replace_init. Signed-off-by:
Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
-
Hans de Goede authored
x86_android_tablet_remove() frees the pdevs[] array, so it should not be used after calling x86_android_tablet_remove(). When platform_device_register() fails, store the pdevs[x] PTR_ERR() value into the local ret variable before calling x86_android_tablet_remove() to avoid using pdevs[] after it has been freed. Fixes: 5eba0141 ("platform/x86: x86-android-tablets: Add support for instantiating platform-devs") Fixes: e2200d3f ("platform/x86: x86-android-tablets: Add gpio_keys support to x86_android_tablet_init()") Cc: stable@vger.kernel.org Reported-by:
Aleksandr Burakov <a.burakov@rosalinux.ru> Closes: https://lore.kernel.org/platform-driver-x86/20240917120458.7300-1-a.burakov@rosalinux.ru/Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20241005130545.64136-1-hdegoede@redhat.com
-
Armin Wolf authored
The WMI driver core now passes the WMI event data to legacy notify handlers, so WMI devices sharing notification IDs are now being handled properly. Fixes: e04e2b76 ("platform/x86: wmi: Pass event data directly to legacy notify handlers") Signed-off-by:
Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20241005213825.701887-1-W_Armin@gmx.deSigned-off-by:
-
Anaswara T Rajan authored
Fix typo in word 'diagnostics' in documentation. Signed-off-by:
Anaswara T Rajan <anaswaratrajan@gmail.com> Reviewed-by:
-
Crag Wang authored
Alienware supports firmware-attributes and has its own OEM string. Signed-off-by:
Crag Wang <crag_wang@dell.com> Link: https://lore.kernel.org/r/20241004152826.93992-1-crag_wang@dell.comReviewed-by:
-
Srinivas Pandruvada authored
Add Diamond Rapids (INTEL_PANTHERCOVE_X) to tpmi_cpu_ids to support domaid id mappings. Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20241003215554.3013807-3-srinivas.pandruvada@linux.intel.comSigned-off-by:
-
Srinivas Pandruvada authored
Add Diamond Rapids (INTEL_PANTHERCOVE_X) to SST support list by adding to isst_cpu_ids. Signed-off-by:
-
Hans de Goede authored
There have been multiple reports that the ACPI PM Timer disabling is causing Sky and Kaby Lake systems to hang on all suspend (s2idle, s3, hibernate) methods. Remove the acpi_pm_tmr_ctl_offset and acpi_pm_tmr_disable_bit settings from spt_reg_map to disable the ACPI PM Timer disabling on Sky and Kaby Lake to fix the hang on suspend. Fixes: e86c8186 ("platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended") Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/linux-pm/18784f62-91ff-4d88-9621-6c88eb0af2b5@molgen.mpg.de/Reported-by:
Todd Brandt <todd.e.brandt@intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219346 Cc: Marek Maslanka <mmaslanka@google.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20241003202614.17181-2-hdegoede@redhat.com
-
Armin Wolf authored
If the battery hook encounters a unsupported battery, it will return an error. This in turn will cause the battery driver to automatically unregister the battery hook. On machines with multiple batteries however, this will prevent the battery hook from handling the primary battery, since it will always get unregistered upon encountering one of the unsupported batteries. Fix this by simply ignoring unsupported batteries. Reviewed-by:
Pali Rohár <pali@kernel.org> Fixes: ab58016c ("platform/x86:dell-laptop: Add knobs to change battery charge settings") Signed-off-by:
-
Jithu Joseph authored
Ashok is no longer with Intel and his e-mail address will start bouncing soon. Update his email address to the new one he provided to ensure correct contact details in the MAINTAINERS file. Signed-off-by:
Jithu Joseph <jithu.joseph@intel.com> Link: https://lore.kernel.org/r/20241001170808.203970-1-jithu.joseph@intel.comSigned-off-by:
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.12, take #1 - Fix pKVM error path on init, making sure we do not change critical system registers as we're about to fail - Make sure that the host's vector length is at capped by a value common to all CPUs - Fix kvm_has_feat*() handling of "negative" features, as the current code is pretty broken - Promote Joey to the status of official reviewer, while James steps down -- hopefully only temporarly
-
Paolo Bonzini authored
Guard them with CONFIG_KVM_X86_COMMON rather than the two vendor modules. In practice this has no functional change, because CONFIG_KVM_X86_COMMON is set if and only if at least one vendor-specific module is being built. However, it is cleaner to specify CONFIG_KVM_X86_COMMON for functions that are used in kvm.ko. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Fixes: 590b09b1 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled") Fixes: 6d55a942 ("x86/reboot: Unconditionally define cpu_emergency_virt_cb typedef") Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
kvm.ko is nothing but library code shared by kvm-intel.ko and kvm-amd.ko. It provides no functionality on its own and it is unnecessary unless one of the vendor-specific module is compiled. In particular, /dev/kvm is not created until one of kvm-intel.ko or kvm-amd.ko is loaded. Use CONFIG_KVM to decide if it is built-in or a module, but use the vendor-specific modules for the actual decision on whether to build it. This also fixes a build failure when CONFIG_KVM_INTEL and CONFIG_KVM_AMD are both disabled. The cpu_emergency_register_virt_callback() function is called from kvm.ko, but it is only defined if at least one of CONFIG_KVM_INTEL and CONFIG_KVM_AMD is provided. Fixes: 590b09b1 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled") Signed-off-by:
-
- 05 Oct, 2024 3 commits
-
-
git://evilpiepirate.org/bcachefsLinus Torvalds authored
Pull bcachefs fixes from Kent Overstreet: "A lot of little fixes, bigger ones include: - bcachefs's __wait_on_freeing_inode() was broken in rc1 due to vfs changes, now fixed along with another lost wakeup - fragmentation LRU fixes; fsck now repairs successfully (this is the data structure copygc uses); along with some nice simplification. - Rework logged op error handling, so that if logged op replay errors (due to another filesystem error) we delete the logged op instead of going into an infinite loop) - Various small filesystem connectivitity repair fixes" * tag 'bcachefs-2024-10-05' of git://evilpiepirate.org/bcachefs: bcachefs: Rework logged op error handling bcachefs: Add warn param to subvol_get_snapshot, peek_inode bcachefs: Kill snapshot arg to fsck_write_inode() bcachefs: Check for unlinked, non-empty dirs in check_inode() bcachefs: Check for unlinked inodes with dirents bcachefs: Check for directories with no backpointers bcachefs: Kill alloc_v4.fragmentation_lru bcachefs: minor lru fsck fixes bcachefs: Mark more errors AUTOFIX bcachefs: Make sure we print error that causes fsck to bail out bcachefs: bkey errors are only AUTOFIX during read bcachefs: Create lost+found in correct snapshot bcachefs: Fix reattach_inode() bcachefs: Add missing wakeup to bch2_inode_hash_remove() bcachefs: Fix trans_commit disk accounting revert bcachefs: Fix bch2_inode_is_open() check bcachefs: Fix return type of dirent_points_to_inode_nowarn() bcachefs: Fix bad shift in bch2_read_flag_list() -
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fix from Juergen Gross: "Fix Xen config issue introduced in the merge window" * tag 'for-linus-6.12a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Fix config option reference in XEN_PRIVCMD definition
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Fix some ext4 bugs and regressions relating to oneline resize and fast commits" * tag 'ext4_for_linus-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix off by one issue in alloc_flex_gd() ext4: mark fc as ineligible using an handle in ext4_xattr_set() ext4: use handle to mark fc as ineligible in __track_dentry_update()
-
