- 30 Nov, 2021 6 commits
-
-
Daniel Scally authored
The .suspend() and .resume() runtime_pm operations for the ipu3-cio2 driver currently do not handle the sensor's stream. Setting .s_stream() on or off for the sensor subdev means that sensors will pause and resume the stream at the appropriate time even if their drivers don't implement those operations. Reviewed-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by:
Daniel Scally <djrscally@gmail.com> Tested-by:
Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Eugen Hristev authored
Current driver supports only SRGGB 10 bit RAW bayer format. Add the enum_mbus_code implementation to report this format supported. # v4l2-ctl -d /dev/v4l-subdev3 --list-subdev-mbus-codes ioctl: VIDIOC_SUBDEV_ENUM_MBUS_CODE (pad=0) 0x300f: MEDIA_BUS_FMT_SRGGB10_1X10 # Signed-off-by:Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Eugen Hristev authored
Fix typo obainted/obtained. Fixes: 0985dd30 ("media: imx274: V4l2 driver for Sony imx274 CMOS sensor") Signed-off-by:
-
Eugen Hristev authored
Fix typo expsoure/exposure Fixes: 0985dd30 ("media: imx274: V4l2 driver for Sony imx274 CMOS sensor") Signed-off-by:
-
Eugen Hristev authored
pm_runtime_resume_and_get should be called when the s_frame_interval is called. The driver will try to access device registers to configure VMAX, coarse time and exposure. Currently if the runtime is not resumed, this fails: # media-ctl -d /dev/media0 --set-v4l2 '"IMX274 1-001a":0[fmt:SRGGB10_1X10/3840x2 160@1/10]' IMX274 1-001a: imx274_binning_goodness: ask 3840x2160, size 3840x2160, goodness 0 IMX274 1-001a: imx274_binning_goodness: ask 3840x2160, size 1920x1080, goodness -3000 IMX274 1-001a: imx274_binning_goodness: ask 3840x2160, size 1280x720, goodness -4000 IMX274 1-001a: imx274_binning_goodness: ask 3840x2160, size 1280x540, goodness -4180 IMX274 1-001a: __imx274_change_compose: selected 1x1 binning IMX274 1-001a: imx274_set_frame_interval: input frame interval = 1 / 10 IMX274 1-001a: imx274_read_mbreg : addr 0x300e, val=0x1 (2 bytes) IMX274 1-001a: imx274_set_frame_interval : register SVR = 1 IMX274 1-001a: imx274_read_mbreg : addr 0x30f6, val=0x6a8 (2 bytes) IMX274 1-001a: imx274_set_frame_interval : register HMAX = 1704 IMX274 1-001a: imx274_set_frame_length : input length = 2112 IMX274 1-001a: imx274_write_mbreg : i2c bulk write failed, 30f8 = 884 (3 bytes) IMX274 1-001a: imx274_set_frame_length error = -121 IMX274 1-001a: imx274_set_frame_interval error = -121 Unable to setup formats: Remote I/O error (121) The device is not resumed thus the remote I/O error. Setting the frame interval works at streaming time, because pm_runtime_resume_and_get is called at s_stream time before sensor setup. The failure happens when only the s_frame_interval is called separately independently on streaming time. Fixes: ad97bc37 ("media: i2c: imx274: Add IMX274 power on and off sequence") Signed-off-by:
-
Kieran Bingham authored
The MAX9286 has not explicitly declared a dependency upon VIDEO_V4L2. While this dependency has likely always been met by configurations including it, the device does use V4L2 core, and should depend upon it. Add VIDEO_V4L2 as a dependency to match other drivers and prevent failures when compile testing. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
- 29 Nov, 2021 28 commits
-
-
Mauro Carvalho Chehab authored
As reported by clang (with W=1), the ctrlVal var is never used. Yet, there are even some loops to estimate it. As this is dead code, remove it. If ever needed, someone could revert this patch. Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
The clock_control value is read but never actually used. Based on a comment at the code, it has to be reset at the function. So, drop the variable that stores its value. Reviewed-by:
-
Mauro Carvalho Chehab authored
The typecasts at the dvb-core generate clang warnings when W=1 is enabled. Such warning is harmless, but it causes the build to break with CONFIG_WERROR and W=1 with clang, so do the cast on a way that it won't produce warnings anymore. Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Robert Foss authored
vfe_reg_clr() is not used in camss-vfe-170.c, and can be removed. Signed-off-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Mauro Carvalho Chehab authored
Such function is currently unused, but could be needed in the future. So, keep it, marking it as __always_unused, in order to avoid a clang W=1 error. Reviewed-by:
Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Such function is currently unused, but could be needed in the future. So, keep it, marking it as __always_unused, in order to avoid a clang W=1 error. Signed-off-by: -
Mauro Carvalho Chehab authored
Those are aliases for another function and not used at the current implementation. So, just drop it. Reviewed-by:
-
Mauro Carvalho Chehab authored
There are several unused helper macros there, meant to parse some fields. As those actually help to document the hardware, the better is to keep them. However, it generates clang warnings with W=1, causing build to break with CONFIG_WERROR. So, add __always_unused to fix such warnings. Signed-off-by: -
Mauro Carvalho Chehab authored
This function is not used, so, just drop it. Reviewed-by:
-
Mauro Carvalho Chehab authored
Solves a clang warning. Reviewed-by:
-
Mauro Carvalho Chehab authored
This isn't used anywhere. So, drop it. Reviewed-by:
-
Mauro Carvalho Chehab authored
When the version warning is given, multiple dev_warn() are called. Consolidate the ones that could be merged altogether. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Clang doesn't like "%hu" on macros: drivers/media/radio/si470x/radio-si470x-i2c.c:414:4: error: format specifies type 'unsigned short' but the argument has type 'int' [-Werror,-Wformat] drivers/media/radio/si470x/radio-si470x-i2c.c:417:4: error: format specifies type 'unsigned short' but the argument has type 'int' [-Werror,-Wformat] Besides that, changeset cbacb5ab ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]") dropped recomendation of using %h. So, just replace them with "%u". Reviewed-by:
-
Mauro Carvalho Chehab authored
There are several unused helper macros there, meant to parse some fields. As those actually help to document the hardware, the better is to keep them. However, it generates clang warnings with W=1, causing build to break with CONFIG_WERROR. So, add __always_unused to fix such warnings. Acked-by:
Ismael Luceno <ismael@iodev.co.uk> Signed-off-by:
-
Mauro Carvalho Chehab authored
If an error occurs while setting the registers at set_frontend, it is silently ignored. Yet, the variable status is updated. Change the logic to return an error if it fails to write values to the registers. Signed-off-by: -
Mauro Carvalho Chehab authored
This value is never used at the code. So, drop it. Solves a W=1 clang warning. Reviewed-by:
-
Mauro Carvalho Chehab authored
This var is set, but never used. So, drop it. Signed-off-by: -
Mauro Carvalho Chehab authored
The offset is not needed, and it is never used, as the pointer itself is already incremented. So, drop it, in order to solve a W=1 clang warning. Reviewed-by:
-
Mauro Carvalho Chehab authored
vpif_get_default_field() seems to be some left-over from a past code that sets the field order. Reviewed-by:
-
Mauro Carvalho Chehab authored
This is just an alias for container_of() and it is used only on a commented code. The commented code actually is an issue that require fixes, so, move the container_of() call to the commented code, and drop the unused function. This way, a fix for the function could be added later without needing to re-add to_state() function. This fixes a clang W=1 warning. Reviewed-by:
-
Mauro Carvalho Chehab authored
Those functions just call a V4L2 core macro, and aren't used anywhere. Get rid of them, in order to avoid clang warnings with W=1. Reviewed-by:
-
Mauro Carvalho Chehab authored
Clang with W=1 produces the following warnings: drivers/media/platform/omap3isp/isph3a_af.c:173:6: error: result of comparison of constant 256 with expression of type '__u8' (aka 'unsigned char') is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (IS_OUT_OF_BOUNDS(paxel_cfg->height, OMAP3ISP_AF_PAXEL_HEIGHT_MIN, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/media/platform/omap3isp/isph3a_af.c:24:33: note: expanded from macro 'IS_OUT_OF_BOUNDS' (((value) < (min)) || ((value) > (max))) ~~~~~~~ ^ ~~~~~ drivers/media/platform/omap3isp/isph3a_af.c:179:6: error: result of comparison of constant 256 with expression of type '__u8' (aka 'unsigned char') is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (IS_OUT_OF_BOUNDS(paxel_cfg->width, OMAP3ISP_AF_PAXEL_WIDTH_MIN, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/media/platform/omap3isp/isph3a_af.c:24:33: note: expanded from macro 'IS_OUT_OF_BOUNDS' (((value) < (min)) || ((value) > (max))) ~~~~~~~ ^ ~~~~~ 2 errors generated. Use a typecast to avoid such warnings. Reviewed-by:Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
This function is only used for debugging purposes. When DEBUG is disabled, it becomes unused, causing a clang warning with W=1. Reviewed-by:
-
Mauro Carvalho Chehab authored
This function is an alias for container_of() that it is currently not used, causing clang warnings. So, drop it. Signed-off-by: -
Mauro Carvalho Chehab authored
Solve some clang warnings about unused functions by dropping some time-conversion inline funcs that aren't used anywhere. Signed-off-by: -
Mauro Carvalho Chehab authored
The typecasts at the dvb-core generate clang warnings when W=1 is enabled. The warns are harmless, but they cause the build to break with CONFIG_WERROR, so do the cast on a way that it won't produce warnings anymore. Signed-off-by: -
Mauro Carvalho Chehab authored
The gobj_type() function translates the media object type into a name, being useful for debugging purposes. It is currently not used. So, drop it. Signed-off-by: -
Mauro Carvalho Chehab authored
The stb6100_normalise_regs() function is not used with current boards, but the driver says that some devices could need it. Ok, we could simply drop it, but as there's a macro to mark unused functions, use it. This should shut up a clang warning. Signed-off-by:
-
- 22 Nov, 2021 6 commits
-
-
Mauro Carvalho Chehab authored
The macro p_to_snd_cx18_card() is just a variant for container_of(), not actually used inside the code. So, drop it. This address a clang warning. Signed-off-by: -
Mauro Carvalho Chehab authored
The macro p_to_snd_ivtv_card() is just a variant for container_of(), not actually used inside the code. So, drop it. This address a clang warning. Signed-off-by: -
Mauro Carvalho Chehab authored
This function is defined twice, one at cx25821-i2c and the other inside cx25821-core. It turns that only the first is actually used inside the code. This causes a clang warning. Signed-off-by: -
Andrzej Pietrasiewicz authored
The G2 decoder block produces NV12 4x4 tiled format (NV12_4L4). Enable the G2 post-processor block, in order to produce regular NV12. The logic in hantro_postproc.c is leveraged to take care of allocating the extra buffers and configure the post-processor, which is significantly simpler than the one on the G1. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Andrzej Pietrasiewicz authored
The struct is not used outside this file, so it can be static. Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
Andrzej Pietrasiewicz authored
VeriSilicon Hantro G2 core supports VP9 codec. [hverkuil: add kerneldoc line for HANTRO_MODE_VP9_DEC] Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by:
-
