- 27 Apr, 2022 7 commits
-
-
Wan Jiabing authored
Use if and else instead of if(A) and if (!A). Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220424094552.105466-1-wanjiabing@vivo.com
-
Wan Jiabing authored
Use if and else instead of if(A) and if (!A). Signed-off-by:
-
Wen Gong authored
This read the country code from SMBIOS and send the country code to firmware, firmware will indicate the regulatory domain info of the country code and then ath11k will use the info. dmesg: [ 1242.637173] ath11k_pci 0000:02:00.0: chip_id 0x2 chip_family 0xb board_id 0xff soc_id 0x400c0200 [ 1242.637176] ath11k_pci 0000:02:00.0: fw_version 0x110b09e5 fw_build_timestamp 2021-06-22 09:32 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-02533-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 [ 1242.637253] ath11k_pci 0000:02:00.0: worldwide regdomain setting from SMBIOS [ 1242.637259] ath11k_pci 0000:02:00.0: bdf variant name not found. [ 1242.637261] ath11k_pci 0000:02:00.0: SMBIOS bdf variant name not set. [ 1242.637263] ath11k_pci 0000:02:00.0: DT bdf variant name not set. [ 1242.927543] ath11k_pci 0000:02:00.0: set current country pdev id 0 alpha2 00 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by:
Wen Gong <quic_wgong@quicinc.com> Signed-off-by:
-
Hari Chandrakanthan authored
When ath11k modules are removed using rmmod with spectral scan enabled, crash is observed. Different crash trace is observed for each crash. Send spectral scan disable WMI command to firmware before cleaning the spectral dbring in the spectral_deinit API to avoid this crash. call trace from one of the crash observed: [ 1252.880802] Unable to handle kernel NULL pointer dereference at virtual address 00000008 [ 1252.882722] pgd = 0f42e886 [ 1252.890955] [00000008] *pgd=00000000 [ 1252.893478] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 1253.093035] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.89 #0 [ 1253.115261] Hardware name: Generic DT based system [ 1253.121149] PC is at ath11k_spectral_process_data+0x434/0x574 [ath11k] [ 1253.125940] LR is at 0x88e31017 [ 1253.132448] pc : [<7f9387b8>] lr : [<88e31017>] psr: a0000193 [ 1253.135488] sp : 80d01bc8 ip : 00000001 fp : 970e0000 [ 1253.141737] r10: 88e31000 r9 : 970ec000 r8 : 00000080 [ 1253.146946] r7 : 94734040 r6 : a0000113 r5 : 00000057 r4 : 00000000 [ 1253.152159] r3 : e18cb694 r2 : 00000217 r1 : 1df1f000 r0 : 00000001 [ 1253.158755] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1253.165266] Control: 10c0383d Table: 5e71006a DAC: 00000055 [ 1253.172472] Process swapper/0 (pid: 0, stack limit = 0x60870141) [ 1253.458055] [<7f9387b8>] (ath11k_spectral_process_data [ath11k]) from [<7f917fdc>] (ath11k_dbring_buffer_release_event+0x214/0x2e4 [ath11k]) [ 1253.466139] [<7f917fdc>] (ath11k_dbring_buffer_release_event [ath11k]) from [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx+0x1840/0x29cc [ath11k]) [ 1253.478807] [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx [ath11k]) from [<7f8fe868>] (ath11k_htc_rx_completion_handler+0x180/0x4e0 [ath11k]) [ 1253.490699] [<7f8fe868>] (ath11k_htc_rx_completion_handler [ath11k]) from [<7f91308c>] (ath11k_ce_per_engine_service+0x2c4/0x3b4 [ath11k]) [ 1253.502386] [<7f91308c>] (ath11k_ce_per_engine_service [ath11k]) from [<7f9a4198>] (ath11k_pci_ce_tasklet+0x28/0x80 [ath11k_pci]) [ 1253.514811] [<7f9a4198>] (ath11k_pci_ce_tasklet [ath11k_pci]) from [<8032227c>] (tasklet_action_common.constprop.2+0x64/0xe8) [ 1253.526476] [<8032227c>] (tasklet_action_common.constprop.2) from [<803021e8>] (__do_softirq+0x130/0x2d0) [ 1253.537756] [<803021e8>] (__do_softirq) from [<80322610>] (irq_exit+0xcc/0xe8) [ 1253.547304] [<80322610>] (irq_exit) from [<8036a4a4>] (__handle_domain_irq+0x60/0xb4) [ 1253.554428] [<8036a4a4>] (__handle_domain_irq) from [<805eb348>] (gic_handle_irq+0x4c/0x90) [ 1253.562321] [<805eb348>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c) Tested-on: QCN6122 hw1.0 AHB WLAN.HK.2.6.0.1-00851-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Hari Chandrakanthan <quic_haric@quicinc.com> Signed-off-by:
-
Manikanta Pubbisetty authored
Currently, WBM idle ring HP is updated much before the shadow configuration is sent to the FW. Any update to the shadow registers before FW mode on request would not be reflected on to the actual HW registers failing to bring up the device. Send FW mode ON QMI request before WBM idle ring HP update to fix this problem. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by:
-
Manikanta Pubbisetty authored
WCN6750 is a single PDEV non-DBS chip which supports 2G, 5G and 6G bands. It is a single LMAC device which can be either hooked to 2G/5G/6G bands. Add WMI changes to support WCN6750. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Manikanta Pubbisetty authored
Though WCN6750 is a single PDEV device, it is not a DBS solution. So, do not put HW in DBS mode for WCN6750. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
- 23 Apr, 2022 7 commits
-
-
Thibaut VARÈNE authored
This patch fixes an invalid TX PA DC bias level on QCA9561, which results in a very low output power and very low throughput as devices are further away from the AP (compared to other 2.4GHz APs). This patch was suggested by Felix Fietkau, who noted[1]: "The value written to that register is wrong, because while the mask definition AR_CH0_TOP2_XPABIASLVL uses a different value for 9561, the shift definition AR_CH0_TOP2_XPABIASLVL_S is hardcoded to 12, which is wrong for 9561." In real life testing, without this patch the 2.4GHz throughput on Yuncore XD3200 is around 10Mbps sitting next to the AP, and closer to practical maximum with the patch applied. [1] https://lore.kernel.org/all/91c58969-c60e-2f41-00ac-737786d435ae@nbd.nameSigned-off-by:
Thibaut VARÈNE <hacks+kernel@slashdirt.org> Acked-by:
Felix Fietkau <nbd@nbd.name> Acked-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
-
Dan Carpenter authored
The "rxstatus->rs_keyix" eventually gets passed to test_bit() so we need to ensure that it is within the bitmap. drivers/net/wireless/ath/ath9k/common.c:46 ath9k_cmn_rx_accept() error: passing untrusted data 'rx_stats->rs_keyix' to 'test_bit()' Fixes: 4ed1a8d4 ("ath9k_htc: use ath9k_cmn_rx_accept") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Minghao Chi authored
Using pm_runtime_resume_and_get() is more appropriate for simplifing code. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by:
-
YueHaibing authored
drivers/net/wireless/ath/ath11k/mac.c:8175:13: error: ‘ath11k_mac_op_ipv6_changed’ defined but not used [-Werror=unused-function] static void ath11k_mac_op_ipv6_changed(struct ieee80211_hw *hw, ^~~~~~~~~~~~~~~~~~~~~~~~~~ Wrap it with #ifdef block to fix this. Fixes: c3c36bfe ("ath11k: support ARP and NS offload") Signed-off-by:YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Yang Yingliang authored
Add the missing unlock before return from function ath11k_wow_op_resume() in the error handling case. Fixes: 90bf5c8d ("ath11k: purge rx pktlog when entering WoW") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Baochen Qiang authored
Add ath11k_mac_op_set_bios_sar_specs() to ath11k_ops, this function is called when user space application calls NL80211_CMD_SET_SAR_SPECS. ath11k also registers SAR type and frequency ranges to wiphy so user space can query SAR capabilities. This feature is currently enabled for WCN6855. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-02431-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by:
Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by:
-
Wen Gong authored
When the WMI service bits are reported from firmware they are divided into multiple segments, with 128 bits in each segment. The first segment is processed by ath11k_wmi_service_bitmap_copy(), the second segment is processed by ath11k_service_available_event() with WMI_TAG_SERVICE_AVAILABLE_EVENT. When the service bit exceed 256 bits, then firmware reports it by tag WMI_TAG_ARRAY_UINT32 in WMI_SERVICE_AVAILABLE_EVENTID. Currently ath11k does not process the third segment. Upcoming features need to know if firmware support is available for the features, so add processing of the third segment. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by:
-
- 12 Apr, 2022 4 commits
-
-
Yang Li authored
The print function dev_err() is redundant because platform_get_irq_byname() already prints an error. Eliminate the follow coccicheck warning: ./drivers/net/wireless/ath/ath9k/ahb.c:103:2-9: line 103 is redundant because platform_get_irq() already prints an error Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Acked-by:
-
Yang Li authored
Eliminate the follow smatch warning: drivers/net/wireless/ath/wcn36xx/smd.c:3151 wcn36xx_smd_gtk_offload_get_info_rsp() warn: inconsistent indenting Reported-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in an ath11k_warn message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Peter Seiderer authored
Stop reading (and copying) from ieee80211_tx_rate to ath_tx_info.rates after list end tag (count == 0, idx < 0), prevents copying of garbage to card registers. Note: no need to write to the remaining ath_tx_info.rates entries as the complete ath_tx_info struct is already initialized to zero from both call sites. Signed-off-by:
Peter Seiderer <ps.report@gmx.net> Acked-by:
-
- 06 Apr, 2022 22 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v5.19. Major changes: ath11k * Wake-on-WLAN support for QCA6390 and WCN6855 * device recovery (firmware restart) support for QCA6390 and WCN6855 wcn36xx * support for transmit rate reporting to user space
-
Kalle Valo authored
No need to have goto for a return statement, so simplify the code. While at it, print warning messages if power up calls fail. No functional changes. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by:
-
Kalle Valo authored
While reviewing the mhi.c I noticed we were just ignoring the errors coming from MHI subsystem during suspend and resume. Add proper checks and warning messages. Also pass the error value to callers. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by:
-
Kalle Valo authored
State machines are difficult to understand and in this case it's just useless, which is shown by the diffstat. So remove it entirely to make the code simpler. No functional changes. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by:
-
Ping-Ke Shih authored
The smatch reports: rtw8852a.c:1857 rtw8852a_btc_set_wl_txpwr_ctrl() error: uninitialized symbol '_cur'. rtw8852a.c:1858 rtw8852a_btc_set_wl_txpwr_ctrl() error: uninitialized symbol '_cur'. This is because rtw89_mac_txpwr_read32() can possibly return before setting argument _cur, and the caller will use the uninitialized value. To fix this problem, check the return value of rtw89_mac_txpwr_read32(). Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220318035202.42437-1-pkshih@realtek.com
-
Ping-Ke Shih authored
8852C uses different fields to represent RX bandwidth. Since other fields are the same, I check chip_id to get bandwidth instead of creating another v1 function. Signed-off-by:
-
Ping-Ke Shih authored
The newer chip will generate security header itself, so don't set IEEE80211_KEY_FLAG_GENERATE_IV in this kind of chip. But, it needs to fill key_index, PN and 802.11 header length to TX descriptor, and then hardware uses these to generate security header. Signed-off-by:
-
Ping-Ke Shih authored
The txdesc is descriptor related to skb->data. The v1 version contains 8 dwords txwd_body and 6 dwords txwd_info, and the format is also different from original one. Signed-off-by:
-
Ping-Ke Shih authored
The txaddr_info is used to fill the DMA address of skb->data. The v1 version can support up to 10 entries, but the maximum size of each entry is 2047, so it fill more than one entry for large packet, like 3000 bytes. Signed-off-by:
-
Ping-Ke Shih authored
8852A and 8852C use different H2C header and size, so add h2c_desc_size to allocate different header size and fill content by fill_txdesc_fwcmd. Signed-off-by:
-
Johnson Lin authored
Bypass IGI, known as Rx gain, adjustment flow for incompatible hardware architectures. Signed-off-by:
Johnson Lin <johnson.lin@realtek.com> Signed-off-by:
-
Johnson Lin authored
Refinement of DIG flow, a mechanism to adjust Rx gain for better Rx performance, by packing IGI(initial gain index) configuration flow into one function. Signed-off-by:
-
Zong-Zhe Yang authored
Update notes: Configure rtw89_regulatory for 6G band according to country. Adjust country GB to use RTW89_UK entry on all bands. Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
-
Zong-Zhe Yang authored
Wrap regd debug dump into a macro and add dump for 6G band field. Extend the macro used to configure regd table to account for multiple bands beyond 2G and 5G. And the follow-up commit will configure the corresponding values for 6G band into regd table. Signed-off-by:
-
Zong-Zhe Yang authored
Update notes: TX power by rate table is not changed. TX power limit table configures values for UK. TX power limit RU table configures values for UK. Signed-off-by:
-
Zong-Zhe Yang authored
Add RTW89_UK to enum rtw89_regulation_type. The follow-up commit will configure the corresponding values for it to TX power tables. Signed-off-by:
-
Ping-Ke Shih authored
An export symbol costs about 40 bytes (in x86 with gcc), so use a structure containing these small arrays to reduce code size. text data bss dec hex filename 34932 1410 0 36342 8df6 mac.o (before) 34276 1258 0 35534 8ace mac.o (after) Signed-off-by:
-
Zong-Zhe Yang authored
Originally, there is already a mechanism, SER (system error recover), to deal with HW/FW recovery. After FW v0.13.36.0, FW supports a H2C (host to chip) command to make a CPU exception. Then, SER is supposed to catch this FW crash and do L2 reset. This feature is a simulation to verify if flow of recovering from FW crash works. Usage of fw_crash debugfs is as the following. $ echo 1 > fw_crash // trigger FW crash and wait SER handling $ cat fw_crash // return 0 if restart has been done Signed-off-by:
-
Zong-Zhe Yang authored
As the fw features gradually increase, it would be better that we have a set of methods to maintain fw features instead of using scattered bool variables. We reconstruct the way fw recognize features, and introduce RTW89_CHK_FW_FEATURE() / RTW89_SET_FW_FEATURE() to check / set fw features for uses. Signed-off-by:
-
Zong-Zhe Yang authored
Read FW backtrace entry through FW reserved payload engine, and then add FW backtrace dump during SER (system error recover) L2 reset process. It contains a list of RA (return address) and SP (stack pointer) which gives us a chance to trace back the call stack of FW. Moreover, if core dump might have wrong content due to error during dumping, we won't invoke device core dump framework. For this case, rtw89_ser_cd_free() is added to free buffer by ourselves. Signed-off-by:
-
Zong-Zhe Yang authored
When FW encounters exception or assertion, SER L2 reset process will start. It will dump some error information and re-download FW eventually. Since such errors are usually critical, we would like to keep more information about error to increase possibility of analysis and debugging FW. We first add FW payload engine (fw reserved playoad engine, fw_rsvd_ple) memory dump. FW will record things like CPU registers, backtrace entry, etc. in it for debugging. Moreover, device core dump framework is used and wrapped to collect kinds of dumps during SER L2 reset process. Signed-off-by:
-
Zong-Zhe Yang authored
While SER (system error recover) is processing, it's supposed to mean something is under recovery. So, disable interrupts (excluding the one of halt which could be used during SER) to avoid unexpected behavior. And then, enable interrupts after SER is done. Signed-off-by:
-
