- 03 Oct, 2006 23 commits
-
-
Siddha, Suresh B authored
Remove dynamic sched group allocations for MC and SMP domains. These allocations can easily fail on big systems(1024 or so CPUs) and we can live with out these dynamic allocations. [akpm@osdl.org: build fix] Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Acked-by:
Ingo Molnar <mingo@elte.hu> Acked-by:
Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Nick Piggin authored
Force /sbin/init off isolated cpus (unless every CPU is specified as an isolcpu). Users seem to think that the isolated CPUs shouldn't have much running on them to begin with. That's fair enough: intuitive, I guess. It also means that the cpu affinity masks of tasks will not include isolcpus by default, which is also more intuitive, perhaps. /sbin/init is spawned from the boot CPU's idle thread, and /sbin/init starts the rest of userspace. So if the boot CPU is specified to be an isolcpu, then prior to this patch, all of userspace will be run there. (throw in a couple of plausible devinit -> cpuinit conversions I spotted while we're here). Signed-off-by:
Nick Piggin <npiggin@suse.de> Cc: Dimitri Sivanich <sivanich@sgi.com> Acked-by:
Paul Jackson <pj@sgi.com> Acked-by:
-
OGAWA Hirofumi authored
switch(reg1 & 0x700) { case 5: info_hpt366.private_data = &hpt366_40; break; case 9: info_hpt366.private_data = &hpt366_25; break; default: info_hpt366.private_data = &hpt366_33; break; } The above runs always default part. It should be "(reg1 & 0x700) >> 8". Signed-off-by:OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Acked-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Luiz Fernando N. Capitulino authored
The 'STABLE BRANCH' entry is duplicated, remove it. Signed-off-by:
Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Cc: Greg KH <greg@kroah.com> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by:
-
Bjorn Helgaas authored
We removed 8250_acpi in 2.6.17. If we don't have PNPACPI turned on, we won't find any ACPI serial devices, so mention this requirement in the troubleshooting part of the documentation. CONFIG_PNPACPI is already turned on in all the relevant defconfigs. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by:
"Luck, Tony" <tony.luck@intel.com> Signed-off-by:
-
Corey Minyard authored
After the previous patch to disable the kernel IPMI daemon if interrupts were available, the issue of broken hardware was raised, and a reasonable request to add an override was mode. So here it is. Allow the user to force the kernel ipmi daemon on or off. This way, hardware with broken interrupts or users that are not concerned with performance can turn it on or off to their liking. [akpm@osdl.org: save 4 bytes in vmlinux] Signed-off-by:
Corey Minyard <minyard@acm.org> Signed-off-by:
-
Pekka Enberg authored
Whomever said... "When you meet someone now who is writing a compiler or hacking a Unix kernel, at least you know they're not just doing it to pick up chicks." ...has obviously never met a _Linux_ kernel hacker. Anyway, sometimes people confuse my email addresses, which is why I really should add the proper one to CREDITS ;-). Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Olaf Hering authored
The last change for partport_pc did fix the common case for all PowerMacs, but it broke the case for PCI multiport IO cards. In fact, the config option CONFIG_PARPORT_PC_SUPERIO=y lead to a hard crash when cups probed the parport driver. It enables the winbond and smsc probing. Remove the PARPORT_BASE check again, parport_pc_find_nonpci_ports() will take care of it. All powerpc configs should have CONFIG_PARPORT_PC_SUPERIO=n, the code did not find anything on the chrp boards we tested it on. Tested on a G4/466 with a PCI card: 0001:10:13.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART) (rev 01) (prog-if 02 [16550]) Subsystem: Timedia Technology Co Ltd Unknown device 5079 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 53 Region 0: I/O ports at f2000800 [size=32] Region 2: I/O ports at f2000870 [size=8] Region 3: I/O ports at f2000860 [size=8] Signed-off-by:Olaf Hering <olaf@aepfle.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Alan Cox authored
Clean up warnings in drivers/isdn by using long not int for the values where we pass void * and cast to integer types. The code is ok (ok passing the stuff this way isn't pretty but the code is valid). In all the cases I checked out the right thing happens anyway but this removes all the warnings. Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Jeff Garzik authored
Acked-by:
-
Jeff Garzik authored
Kill warning: drivers/char/ip2/ip2main.c: In function âip2_loadmainâ: drivers/char/ip2/ip2main.c:782: warning: label âout_classâ defined but not used This driver's initialization (and cleanup of errors during init) is extremely convoluted, and could stand to be transformed into the standard unwinding-goto style of error cleanup. Signed-off-by:
Jeff Garzik <jeff@garzik.org> Acked-by:
Michael H. Warfield <mhw@wittsend.com> Signed-off-by:
-
Jeff Garzik authored
gcc issues the following warning: drivers/char/ipmi/ipmi_si_intf.c: In function âinit_ipmi_siâ: drivers/char/ipmi/ipmi_si_intf.c:1729: warning: âdata.irqâ may be used uninitialized in this function This is indeed a bug. data.irq is completely uninitialized in some code paths. Worse than that, data from a previous decode_dmi() run can easily leak through successive calls. Signed-off-by:
-
Jeff Garzik authored
While reviewing the 'may be used uninitialized' bogus gcc warnings, I noticed that an error code assignment was only needed if an error had actually occured. Signed-off-by:
-
Randy Dunlap authored
Add kernel-doc function headers in kernel/resource.c and use them in DocBook. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Randy Dunlap authored
Add kernel-doc function headers in kernel/dma.c and use it in DocBook. Clean up kernel-doc in mca_dma.h (the colon (':') represents a section header). Signed-off-by: -
keios authored
It is a non-standard heap-sort algorithm implementation because the index of child node is wrong . The sort function still outputs right result, but the performance is O( n * ( log(n) + 1 ) ) , about 10% ~ 20% worse than standard algorithm. Signed-off-by:
keios <keios.cn@gmail.com> Acked-by:
Matt Mackall <mpm@selenic.com> Acked-by:
Zou Nan hai <nanhai.zou@intel.com> Signed-off-by:
-
Franck Bui-Huu authored
Some uses of kallsyms_lookup() do not need to find out the name of a symbol and its module's name it belongs. This is specially true in arch specific code, which needs to unwind the stack to show the back trace during oops (mips is an example). In this specific case, we just need to retreive the function's size and the offset of the active intruction inside it. Adds a new entry "kallsyms_lookup_size_offset()" This new entry does exactly the same as kallsyms_lookup() but does not require any buffers to store any names. It returns 0 if it fails otherwise 1. Signed-off-by:
Franck Bui-Huu <vagabon.xyz@gmail.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
David Howells authored
Permit kmalloc() to make allocations of up to 32MB if so configured. This may be useful under NOMMU conditions where vmalloc() can't do this. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
These patches make the kernel pass 64-bit inode numbers internally when communicating to userspace, even on a 32-bit system. They are required because some filesystems have intrinsic 64-bit inode numbers: NFS3+ and XFS for example. The 64-bit inode numbers are then propagated to userspace automatically where the arch supports it. Problems have been seen with userspace (eg: ld.so) using the 64-bit inode number returned by stat64() or getdents64() to differentiate files, and failing because the 64-bit inode number space was compressed to 32-bits, and so overlaps occur. This patch: Make filldir_t take a 64-bit inode number and struct kstat carry a 64-bit inode number so that 64-bit inode numbers can be passed back to userspace. The stat functions then returns the full 64-bit inode number where available and where possible. If it is not possible to represent the inode number supplied by the filesystem in the field provided by userspace, then error EOVERFLOW will be issued. Similarly, the getdents/readdir functions now pass the full 64-bit inode number to userspace where possible, returning EOVERFLOW instead when a directory entry is encountered that can't be properly represented. Note that this means that some inodes will not be stat'able on a 32-bit system with old libraries where they were before - but it does mean that there will be no ambiguity over what a 32-bit inode number refers to. Note similarly that directory scans may be cut short with an error on a 32-bit system with old libraries where the scan would work before for the same reasons. It is judged unlikely that this situation will occur because modern glibc uses 64-bit capable versions of stat and getdents class functions exclusively, and that older systems are unlikely to encounter unrepresentable inode numbers anyway. [akpm: alpha build fix] Signed-off-by:
-
Andrew Morton authored
Make the pid.h macros look less revolting in an 80-col window. Signed-off-by:
-
Paul Mundt authored
This seems to have been missed when unifdef went in via Sam's tree.. Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Jeff Garzik authored
The previous hp100 changeset attempted to kill warnings, but was only tested on !CONFIG_ISA platforms. The correct conditional compilation setup involves tested CONFIG_ISA rather than just MODULE. Fixes link on CONFIG_ISA platforms (i386) in current -git. Signed-off-by:
-
Andrew Morton authored
Commit 54dbc0c9 is causing various people's machines to fail to map PCI resources. Revert it in preparation for addressing the show-APICs-in-/proc/iomem requirement in a different manner. Cc: Aaron Durbin <adurbin@google.com> Cc: Andi Kleen <ak@muc.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
- 02 Oct, 2006 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: Tweak trace message format IB/ehca: Fix device registration IB/ipath: Fix RDMA reads RDMA/cma: Optimize error handling RDMA/cma: Eliminate unnecessary remove_list RDMA/cma: Set status correctly on route resolution error RDMA/cma: Fix device removal race RDMA/cma: Fix leak of cm_ids in case of failures
-
Hoang-Nam Nguyen authored
Add an extra space to make things more readable. Signed-off-by:
Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by:
Roland Dreier <rolandd@cisco.com>
-
Hoang-Nam Nguyen authored
Move the call to ib_register_device() later, since a device should not be registered until it is completely read to be used. This fixes crashes that occur if an upper-layer driver such as IPoIB is loaded before the ehca module. Signed-off-by:
-
Ralph Campbell authored
The PSN used to generate the request following a RDMA read was incorrect and some state booking wasn't maintained correctly. This patch fixes that. Signed-off-by:
Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by:
Bryan O'Sullivan <bryan.osullivan@qlogic.com>
-
Krishna Kumar authored
Reorganize code relating to cma_get_net_info() and rdam_create_id() to optimize error case handling (no need to alloc memory/etc. as part of rdma_create_id() if input parameters are wrong). Signed-off-by:
Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by:
Sean Hefty <sean.hefty@intel.com> Signed-off-by:
-
Krishna Kumar authored
Eliminate remove_list by using list_del_init() instead during device removal handling. Signed-off-by:
-
Sean Hefty authored
On reporting a route error, also include the status for the error, rather than indicating a status of 0 when an error has occurred. Signed-off-by:
-
Krishna Kumar authored
The race is as follows: A process : cma_process_remove() calls cma_remove_id_dev(), which sets id state to CMA_DEVICE_REMOVAL and calls wait_event(dev_remove). B process : cma_req_handler() had incremented dev_remove, and calls cma_acquire_ib_dev() and on failure calls cma_release_remove(), which does a wake_up of cma_process_remove(). Then cma_req_handler() calls rdma_destroy_id(); A Process : cma_remove_id_dev() gets woken and checks the state of id, and since it is still (wrongly) CMA_DEVICE_REMOVAL, it calls notify_user(id) and if that fails, the caller - cma_process_remove() calls rdma_destroy_id(id). Two processes can call rdma_destroy_id(), resulting in one de-referencing kfreed id_priv. Fix is for process B to set CMA_DESTROYING in cma_req_handler() so that process A will return instead of doing a rdma_destroy_id(). Signed-off-by:
-
Krishna Kumar authored
cma_connect_ib() and cma_connect_iw() leak cm_id's in failure cases. Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] improve machzwd detection [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() [WATCHDOG] s3c24XX nowayout [WATCHDOG] pnx4008: add cpu_relax() [WATCHDOG] pnx4008_wdt.c - spinlock fixes. [WATCHDOG] pnx4008_wdt.c - remove patch [WATCHDOG] pnx4008_wdt.c - nowayout patch [WATCHDOG] pnx4008: add watchdog support [WATCHDOG] i8xx_tco remove pci_find_device. [WATCHDOG] alim remove pci_find_device
-
Dave Jones authored
On a machine with no machzwd, loading the module prints out.. machzwd: MachZ ZF-Logic Watchdog driver initializing. 0xffff machzwd: Watchdog using action = RESET - the 0xffff printk is unnecessary - 0xffff seems to be 'hardware not present' - fix CodingStyle. (This driver could use some more work here) Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Samuel Tardieu authored
Return ENOTTY instead of ENOIOCTLCMD in user-visible ioctl() results The watchdog drivers used to return ENOIOCTLCMD for bad ioctl() commands. ENOIOCTLCMD should not be visible by the user, so use ENOTTY instead. Signed-off-by:
Samuel Tardieu <sam@rfc1149.net> Signed-off-by:
-
Ben Dooks authored
If the driver is not configured for `no way out`, then the open method should not automatically allow the setting of allow_close to CLOSE_STATE_ALLOW. The setting of allow_close nullifies the use of the magic close via the write path. It means that in the default state, the watchdog will shut-down even if the magic close has not been issued. Signed-off-by:Ben Dooks <ben-linux@fluff.org>
-
Vitaly Wool authored
Added cpu_relax as suggested by Alan Cox. Signed-off-by:
Vitaly Wool <vitalywool@gmail.com> Signed-off-by:
-
Wim Van Sebroeck authored
Add io spinlocks to prevent possible race conditions between start and stop operations that are issued from different child processes where the master process opened /dev/watchdog. Signed-off-by: -
Linus Torvalds authored
Duh. I screwed up editing David Howells patch in commit 3f2e05e9, and the actual declaration for the sigset_from_compat() function went missing. My bad. Olaf Hering saved the day and noticed that I'm a moron. Signed-off-by:
-
Wim Van Sebroeck authored
Change remove code so that we first detach the driver from userspace, then clean up the clock and then clean up the memory we allocated. Signed-off-by:
-
