1. 27 May, 2020 32 commits
  2. 26 May, 2020 8 commits
    • David S. Miller's avatar
      Merge branch 'net-phy-mscc-miim-reduce-waiting-time-between-MDIO-transactions' · 0e348119
      David S. Miller authored
      Antoine Tenart says:
      
      ====================
      net: phy: mscc-miim: reduce waiting time between MDIO transactions
      
      This series aims at reducing the waiting time between MDIO transactions
      when using the MSCC MIIM MDIO controller.
      
      I'm not sure we need patch 4/4 and we could reasonably drop it from the
      series. I'm including the patch as it could help to ensure the system
      is functional with a non optimal configuration.
      
      We needed to improve the driver's performances as when using a PHY
      requiring lots of registers accesses (such as the VSC85xx family),
      delays would add up and ended up to be quite large which would cause
      issues such as: a slow initialization of the PHY, and issues when using
      timestamping operations (this feature will be sent quite soon to the
      mailing lists).
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0e348119
    • Antoine Tenart's avatar
      net: phy: mscc-miim: read poll when high resolution timers are disabled · a021ada2
      Antoine Tenart authored
      The driver uses a read polling mechanism to check the status of the MDIO
      bus, to know if it is ready to accept next commands. This polling
      mechanism uses usleep_delay() under the hood between reads which is fine
      as long as high resolution timers are enabled. Otherwise the delays will
      end up to be much longer than expected.
      
      This patch fixes this by using udelay() under the hood when
      CONFIG_HIGH_RES_TIMERS isn't enabled. This increases CPU usage.
      Signed-off-by: default avatarAntoine Tenart <antoine.tenart@bootlin.com>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a021ada2
    • Antoine Tenart's avatar
      net: phy: mscc-miim: improve waiting logic · d9c6de35
      Antoine Tenart authored
      The MSCC MIIM MDIO driver uses a waiting logic to wait for the MDIO bus
      to be ready to accept next commands. It does so by polling the BUSY
      status bit which indicates the MDIO bus has completed all pending
      operations. This can take time, and the controller supports writing the
      next command as soon as there are no pending commands (which happens
      while the MDIO bus is busy completing its current command).
      
      This patch implements this improved logic by adding an helper to poll
      the PENDING status bit, and by adjusting where we should wait for the
      bus to not be busy or to not be pending.
      Signed-off-by: default avatarAntoine Tenart <antoine.tenart@bootlin.com>
      Reviewed-by: default avatarAlexandre Belloni <alexandre.belloni@bootlin.com>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d9c6de35
    • Antoine Tenart's avatar
      net: phy: mscc-miim: remove redundant timeout check · f5112c8a
      Antoine Tenart authored
      readl_poll_timeout already returns -ETIMEDOUT if the condition isn't
      satisfied, there's no need to check again the condition after calling
      it. Remove the redundant timeout check.
      Signed-off-by: default avatarAntoine Tenart <antoine.tenart@bootlin.com>
      Reviewed-by: default avatarAlexandre Belloni <alexandre.belloni@bootlin.com>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f5112c8a
    • Antoine Tenart's avatar
      net: phy: mscc-miim: use more reasonable delays · 9513167e
      Antoine Tenart authored
      The MSCC MIIM MDIO driver uses delays to read poll a status register. I
      made multiple tests on a Ocelot PCS120 platform which led me to reduce
      those delays. The delay in between which the polling function is allowed
      to sleep is reduced from 100us to 50us which in almost all cases is a
      good value to succeed at the first retry. The overall delay is also
      lowered as the prior value was really way to high, 10000us is large
      enough.
      Signed-off-by: default avatarAntoine Tenart <antoine.tenart@bootlin.com>
      Reviewed-by: default avatarAlexandre Belloni <alexandre.belloni@bootlin.com>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9513167e
    • Russell King's avatar
      net: mdiobus: add clause 45 mdiobus accessors · 90ce665c
      Russell King authored
      There is a recurring pattern throughout some of the PHY code converting
      a devad and regnum to our packed clause 45 representation. Rather than
      having this scattered around the code, let's put a common translation
      function in mdio.h, and provide some register accessors.
      
      Convert the phylib core, phylink, bcm87xx and cortina to use these.
      Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      90ce665c
    • David S. Miller's avatar
      Merge branch 'flow-mpls' · 8928e19a
      David S. Miller authored
      Guillaume Nault says:
      
      ====================
      flow_dissector, cls_flower: Add support for multiple MPLS Label Stack Entries
      
      Currently, the flow dissector and the Flower classifier can only handle
      the first entry of an MPLS label stack. This patch series generalises
      the code to allow parsing and matching the Label Stack Entries that
      follow.
      
      Patch 1 extends the flow dissector to parse MPLS LSEs until the Bottom
      Of Stack bit is reached. The number of parsed LSEs is capped at
      FLOW_DIS_MPLS_MAX (arbitrarily set to 7). Flower and the NFP driver
      are updated to take into account the new layout of struct
      flow_dissector_key_mpls.
      
      Patch 2 extends Flower. It defines new netlink attributes, which are
      independent from the previous MPLS ones. Mixing the old and the new
      attributes in a same filter is not allowed. For backward compatibility,
      the old attributes are used when dumping filters that don't require the
      new ones.
      
      Changes since v2:
        * Fix compilation with the new MLX5 bareudp tunnel code.
      
      Changes since v1:
        * Fix compilation of NFP driver (kbuild test robot).
        * Fix sparse warning with entropy label (kbuild test robot).
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8928e19a
    • Guillaume Nault's avatar
      cls_flower: Support filtering on multiple MPLS Label Stack Entries · 61aec25a
      Guillaume Nault authored
      With struct flow_dissector_key_mpls now recording the first
      FLOW_DIS_MPLS_MAX labels, we can extend Flower to filter on any of
      these LSEs independently.
      
      In order to avoid creating new netlink attributes for every possible
      depth, let's define a new TCA_FLOWER_KEY_MPLS_OPTS nested attribute
      that contains the list of LSEs to match. Each LSE is represented by
      another attribute, TCA_FLOWER_KEY_MPLS_OPTS_LSE, which then contains
      the attributes representing the depth and the MPLS fields to match at
      this depth (label, TTL, etc.).
      
      For each MPLS field, the mask is always set to all-ones, as this is
      what the original API did. We could allow user configurable masks in
      the future if there is demand for more flexibility.
      
      The new API also allows to only specify an LSE depth. In that case,
      Flower only verifies that the MPLS label stack depth is greater or
      equal to the provided depth (that is, an LSE exists at this depth).
      
      Filters that only match on one (or more) fields of the first LSE are
      dumped using the old netlink attributes, to avoid confusing user space
      programs that don't understand the new API.
      Signed-off-by: default avatarGuillaume Nault <gnault@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      61aec25a