NETIF_F_ALL_FCOE is used only in vlan_dev.c, 2 times. Now that it's only
2 bits, open-code it and remove the definition from netdev_features.h.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Ability to handle maximum FCoE frames of 2158 bytes can never be changed
and thus more of an attribute, not a toggleable feature.
Move it from netdev_features_t to "cold" priv flags (bitfield bool) and
free yet another feature bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

"Interface can't change network namespaces" is rather an attribute,
not a feature, and it can't be changed via Ethtool.
Make it a "cold" private flag instead of a netdev_feature and free
one more bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

NETIF_F_LLTX can't be changed via Ethtool and is not a feature,
rather an attribute, very similar to IFF_NO_QUEUE (and hot).
Free one netdev_features_t bit and make it a "hot" private flag.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Make dev->priv_flags `u32` back and define bits higher than 31 as
bitfield booleans as per Jakub's suggestion. This simplifies code
which accesses these bits with no optimization loss (testb both
before/after), allows to not extend &netdev_priv_flags each time,
but also scales better as bits > 63 in the future would only add
a new u64 to the structure with no complications, comparing to
that extending ::priv_flags would require converting it to a bitmap.
Note that I picked `unsigned long :1` to not lose any potential
optimizations comparing to `bool :1` etc.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This commit introduces implementations of three functions:
.port_fdb_dump
.port_fdb_add
.port_fdb_del

The FDB database organization is the same as in other old Vitesse chips:
It has 2048 rows and 4 columns (buckets). The row index is calculated by
the hash function 'vsc73xx_calc_hash' and the FDB entry must be placed
exactly into row[hash]. The chip selects the bucket number by itself.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://patch.msgid.link/20240827123938.582789-1-paweldembicki@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'linux-can-next-for-6.12-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2024-08-30

The first patch is by Duy Nguyen and document the R-Car V4M support in
the rcar-canfd DT bindings.

Frank Li's patch converts the microchip,mcp251x.txt DT bindings
documentation to yaml.

A patch by Zhang Changzhong update a comment in the j1939 CAN
networking stack.

Stefan Mätje's patch updates the CAN configuration netlink code, so
that the bit timing calculation doesn't work on stale
can_priv::ctrlmode data.

Martin Jocic contributes a patch for the kvaser_pciefd driver to
convert some ifdefs into if (IS_ENABLED()).

The last patch is by Yan Zhen and simplifies the probe() function of
the kvaser USB driver by using dev_err_probe().

* tag 'linux-can-next-for-6.12-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
  can: kvaser_usb: Simplify with dev_err_probe()
  can: kvaser_pciefd: Use IS_ENABLED() instead of #ifdef
  can: netlink: avoid call to do_set_data_bittiming callback with stale can_priv::ctrlmode
  can: j1939: use correct function name in comment
  dt-bindings: can: convert microchip,mcp251x.txt to yaml
  dt-bindings: can: renesas,rcar-canfd: Document R-Car V4M support
====================

Link: https://patch.msgid.link/20240830214406.1605786-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for RTL8126A rev.b. Its XID is 0x64a. It is basically
based on the one with XID 0x649, but with different firmware file.
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20240830021810.11993-1-hau@realtek.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In commit 27f91aaf ("netdev-genl: Add netlink framework functions
for napi"), when an invalid NAPI ID is specified the return value
-EINVAL is used and no extack is set.

Change the return value to -ENOENT and set the extack.

Before this commit:

$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
                          --do napi-get --json='{"id": 451}'
Netlink error: Invalid argument
nl_len = 36 (20) nl_flags = 0x100 nl_type = 2
	error: -22

After this commit:

$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
                         --do napi-get --json='{"id": 451}'
Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
	error: -2
	extack: {'bad-attr': '.id'}
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240831121707.17562-1-jdamato@fastly.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This callback doesn't seem to serve much purpose, and prevents things
like:

    - systemd.link files from disabling autonegotiation
    - carrier detection in NetworkManager
    - any ethtool setting

prior to userspace bringing the link up.

The only fear I can think of is accessing unclocked resources due to
pm_runtime, but ethtool ioctls handle that as of commit
f32a2137 ("ethtool: runtime-resume netdev parent before ethtool ioctl ops")
Reviewed-by: Dmitry Dolenko <d.dolenko@metrotek.ru>
Tested-by: Dmitry Dolenko <d.dolenko@metrotek.ru>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Srujana Challa says:

====================
octeontx2-af: update CPT block for CN10KB and CN10KA B0

This commit addresses two key updates for the CN10KB and CN10KA B0:

1. The number of FLT interrupt vectors has been reduced to 2 on CN10KB.
The code is updated to reflect this change across the CN10K series.
2. The maximum CPT credits that RX can use are now configurable through
a hardware CSR on CN10KA B0. This patch sets the default value to optimize
peak performance, aligning it with other chip versions.

v2:
- Addressed the review comments.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The maximum CPT credits that RXC can use are now configurable on CN10KA B0
through a hardware CSR. This patch sets the default value to optimize peak
performance, aligning it with other chip versions.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch modifies the driver to prevent access to RXC hardware
registers on the CN10KB, as RXC is not available on this chip.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch updates the driver to use a dynamic number of vectors instead
of a hard-coded value. This change accommodates the CN10KB, which has 2
vectors, unlike the previously supported chips that have 3 vectors.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
Unmask upper DSCP bits - part 2

tl;dr - This patchset continues to unmask the upper DSCP bits in the
IPv4 flow key in preparation for allowing IPv4 FIB rules to match on
DSCP. No functional changes are expected. Part 1 was merged in commit
("Merge branch 'unmask-upper-dscp-bits-part-1'").

The TOS field in the IPv4 flow key ('flowi4_tos') is used during FIB
lookup to match against the TOS selector in FIB rules and routes.

It is currently impossible for user space to configure FIB rules that
match on the DSCP value as the upper DSCP bits are either masked in the
various call sites that initialize the IPv4 flow key or along the path
to the FIB core.

In preparation for adding a DSCP selector to IPv4 and IPv6 FIB rules, we
need to make sure the entire DSCP value is present in the IPv4 flow key.
This patchset continues to unmask the upper DSCP bits, but this time in
the output route path.

Patches #1-#3 unmask the upper DSCP bits in the various places that
invoke the core output route lookup functions directly.

Patches #4-#6 do the same in three helpers that are widely used in the
output path to initialize the TOS field in the IPv4 flow key.

The rest of the patches continue to unmask these bits in call sites that
invoke the following wrappers around the core lookup functions:

Patch #7 - __ip_route_output_key()
Patches #8-#12 - ip_route_output_flow()

The next patchset will handle the callers of ip_route_output_ports() and
ip_route_output_key().

No functional changes are expected as commit 1fa3314c ("ipv4:
Centralize TOS matching") moved the masking of the upper DSCP bits to
the core where 'flowi4_tos' is matched against the TOS selector.

Changes since v1 [1]:

* Remove IPTOS_RT_MASK in patch #7 instead of in patch #6

[1] https://lore.kernel.org/netdev/20240827111813.2115285-1-idosch@nvidia.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Unmask the upper DSCP bits when calling ip_route_output_flow() so that
in the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unmask the upper DSCP bits when calling ip_route_output_flow() so that
in the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unmask the upper DSCP bits when calling ip_route_output_flow() so that
in the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function calls flowi4_init_output() to initialize an IPv4 flow key
with which it then performs a FIB lookup using ip_route_output_flow().

The 'tos' variable with which the TOS value in the IPv4 flow key
(flowi4_tos) is initialized contains the full DS field. Unmask the upper
DSCP bits so that in the future the FIB lookup could be performed
according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function calls flowi4_init_output() to initialize an IPv4 flow key
with which it then performs a FIB lookup using ip_route_output_flow().

'arg->tos' with which the TOS value in the IPv4 flow key (flowi4_tos) is
initialized contains the full DS field. Unmask the upper DSCP bits so
that in the future the FIB lookup could be performed according to the
full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function returns a value that is used to initialize 'flowi4_tos'
before being passed to the FIB lookup API in the following call chain:

xfrm_bundle_create()
	tos = xfrm_get_tos(fl, family)
	xfrm_dst_lookup(..., tos, ...)
		__xfrm_dst_lookup(..., tos, ...)
			xfrm4_dst_lookup(..., tos, ...)
				__xfrm4_dst_lookup(..., tos, ...)
					fl4->flowi4_tos = tos
					__ip_route_output_key(net, fl4)

Unmask the upper DSCP bits so that in the future the output route lookup
could be performed according to the full DSCP value.

Remove IPTOS_RT_MASK since it is no longer used.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

build_sk_flow_key() and __build_flow_key() are used to build an IPv4
flow key before calling one of the FIB lookup APIs.

Unmask the upper DSCP bits so that in the future the lookup could be
performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function is used by a few socket types to retrieve the TOS value
with which to perform the FIB lookup for packets sent through the socket
(flowi4_tos). If a DS field was passed using the IP_TOS control message,
then it is used. Otherwise the one specified via the IP_TOS socket
option.

Unmask the upper DSCP bits so that in the future the lookup could be
performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function is used to read the DS field that was stored in IPv4
sockets via the IP_TOS socket option so that it could be used to
initialize the flowi4_tos field before resolving an output route.

Unmask the upper DSCP bits so that in the future the output route lookup
could be performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function is called to resolve a route for an ICMP message that is
sent in response to a situation. Based on the type of the generated ICMP
message, the function is either passed the DS field of the packet that
generated the ICMP message or a DS field that is derived from it.

Unmask the upper DSCP bits before resolving and output route via
ip_route_output_key_hash() so that in the future the lookup could be
performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unmask the upper DSCP bits so that in the future output routes could be
looked up according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unmask the upper DSCP bits when looking up an output route via the
RTM_GETROUTE netlink message so that in the future the lookup could be
performed according to the full DSCP value.

No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_err_probe() is used to log an error message during the probe process
of a device.

It can simplify the error path and unify a message template.

Using this helper is totally fine even if err is known to never
be -EPROBE_DEFER.

The benefit compared to a normal dev_err() is the standardized format
of the error code, it being emitted symbolically and the fact that
the error code is returned which allows more compact error paths.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Link: https://patch.msgid.link/20240830110651.519119-1-yanzhen@vivo.com
mkl: fix indention
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Use the IS_ENABLED() macro to check kernel config defines instead of
ifdef. Use upper_32_bits() to avoid warnings about "right shift count
>= width of type" on systems with CONFIG_ARCH_DMA_ADDR_T_64BIT not
set. In kvaser_pciefd_write_dma_map_altera() use lower_32_bits() for
symmetry.
Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://patch.msgid.link/20240830141038.1402217-1-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This patch moves the evaluation of data[IFLA_CAN_CTRLMODE] in function
can_changelink in front of the evaluation of data[IFLA_CAN_BITTIMING].

This avoids a call to do_set_data_bittiming providing a stale
can_priv::ctrlmode with a CAN_CTRLMODE_FD flag not matching the
requested state when switching between a CAN Classic and CAN-FD bitrate.

In the same manner the evaluation of data[IFLA_CAN_CTRLMODE] in function
can_validate is also moved in front of the evaluation of
data[IFLA_CAN_BITTIMING].

This is a preparation for patches where the nominal and data bittiming
may have interdependencies on the driver side depending on the
CAN_CTRLMODE_FD flag state.
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://patch.msgid.link/20240808164224.213522-1-stefan.maetje@esd.euSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The function j1939_cancel_all_active_sessions() was renamed to
j1939_cancel_active_session() but name in comment wasn't updated.
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Link: https://patch.msgid.link/1724935703-44621-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Convert binding doc microchip,mcp251x.txt to yaml.
Additional change:
- add ref to spi-peripheral-props.yaml

Fix below warning:
arch/arm64/boot/dts/freescale/imx8dx-colibri-eval-v3.dtb: /bus@5a000000/spi@5a020000/can@0:
	failed to match any schema with compatible: ['microchip,mcp2515']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240814164407.4022211-1-Frank.Li@nxp.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Document support for the CAN-FD Interface on the Renesas R-Car V4M
(R8A779H0) SoC, which supports up to four channels.

The CAN-FD module on R-Car V4M is very similar to the one on R-Car V4H,
but differs in some hardware parameters, as reflected by the Parameter
Status Information part of the Global IP Version Register.  However,
none of this parameterization should have any impact on the driver, as
the driver does not access any register that is impacted by the
parameterization (except for the number of channels).
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
[geert: Clarify R-Car V4M differences]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/68b5f910bef89508e3455c768844ebe859d6ff1d.1722520779.git.geert+renesas@glider.beSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Move validation into set, removing .set_validate operation as its current
implementation holds the rtnl lock for acquiring the PHY device, defeating
the intended purpose of checking before grabbing the lock.

Reported-by: syzbot+ec369e6d58e210135f71@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ec369e6d58e210135f71
Fixes: 31748765 ("net: ethtool: pse-pd: Target the command to the requested PHY")
Signed-off-by: Diogo Jahchan Koike <djahchankoike@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20240829184830.5861-1-djahchankoike@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Two fields, page_pools and *irq_moder, were added to struct net_device
in commit 083772c9 ("net: page_pool: record pools per netdev") and
commit f750dfe8 ("ethtool: provide customized dim profile
management"), respectively.

Add both to the net_cachelines documentation, as well.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240829155742.366584-1-jdamato@fastly.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Eric Dumazet says:

====================
icmp: avoid possible side-channels attacks

Keyu Man reminded us that linux ICMP rate limiting was still allowing
side-channels attacks.

Quoting the fine document [1]:

4.4 Private Source Port Scan Method
...
 We can then use the same global ICMP rate limit as a side
 channel to infer if such an ICMP message has been triggered. At
 first glance, this method can work but at a low speed of one port
 per second, due to the per-IP rate limit on ICMP messages.
 Surprisingly, after we analyze the source code of the ICMP rate
 limit implementation, we find that the global rate limit is checked
 prior to the per-IP rate limit. This means that even if the per-IP
 rate limit may eventually determine that no ICMP reply should be
 sent, a packet is still subjected to the global rate limit check and one
 token is deducted. Ironically, such a decision is consciously made
 by Linux developers to avoid invoking the expensive check of the
 per-IP rate limit [ 22], involving a search process to locate the per-IP
 data structure.
 This effectively means that the per-IP rate limit can be disre-
 garded for the purpose of our side channel based scan, as it only
 determines if the final ICMP reply is generated but has nothing to
 do with the global rate limit counter decrement. As a result, we can
 continue to use roughly the same scan method as efficient as before,
 achieving 1,000 ports per second
...

This series :

1) Changes the order of the two rate limiters to fix the issue.

2-3) Make the 'host-wide' rate limiter a per-netns one.

[1]
Link: https://dl.acm.org/doi/pdf/10.1145/3372297.3417280
====================

Link: https://patch.msgid.link/20240829144641.3880376-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Previous patch made ICMP rate limits per netns, it makes sense
to allow each netns to change the associated sysctl.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240829144641.3880376-4-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Host wide ICMP ratelimiter should be per netns, to provide better isolation.

Following patch in this series makes the sysctl per netns.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240829144641.3880376-3-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ICMP messages are ratelimited :

After the blamed commits, the two rate limiters are applied in this order:

1) host wide ratelimit (icmp_global_allow())

2) Per destination ratelimit (inetpeer based)

In order to avoid side-channels attacks, we need to apply
the per destination check first.

This patch makes the following change :

1) icmp_global_allow() checks if the host wide limit is reached.
   But credits are not yet consumed. This is deferred to 3)

2) The per destination limit is checked/updated.
   This might add a new node in inetpeer tree.

3) icmp_global_consume() consumes tokens if prior operations succeeded.

This means that host wide ratelimit is still effective
in keeping inetpeer tree small even under DDOS.

As a bonus, I removed icmp_global.lock as the fast path
can use a lock-free operation.

Fixes: c0303efe ("net: reduce cycles spend on ICMP replies that gets rate limited")
Fixes: 4cdf507d ("icmp: add a global rate limitation")
Reported-by: Keyu Man <keyu.man@email.ucr.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240829144641.3880376-2-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Using ERR_CAST() is more reasonable and safer, When it is necessary
to convert the type of an error pointer and return it.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240829095509.3151987-1-yanzhen@vivo.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>