Signed-off-by: Arve Hjønnevåg <arve@android.com>

Signed-off-by: Dima Zavin <dima@android.com>

Signed-off-by: Brian Swetland <swetland@google.com>

Signed-off-by: Arve Hjønnevåg <arve@android.com>

This adds a basic board file without Kconfig changes.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

This adds a basic board file without Kconfig changes.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

This adds a basic board file without Kconfig changes.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

This adds a basic board file without Kconfig changes.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

This reverts commit ee3c454b.

As request by Russell King.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

Handle incorrectly reported permission faults for qsd8650.  On
permission faults, retry MVA to PA conversion.  If retry detects
translation fault.  Report as translation fault.

Cc: Jamie Lokier <jamie@shareable.org>
Signed-off-by: Dave Estes <cestes@quicinc.com>

add oprofile pmu support for msm.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

MSM supports the <linux/clk.h> interface.
Acked-by: David Brown <davidb@quicinc.com>
Signed-off-by: Steve Muckle <smuckle@quicinc.com>

ARCH_MSM supports armv7 cpus, so we're pushed the CPU_V6/CPU_V7 selection
down into the arch/arm/mach-msm/Kconfig.

Also update the description to be a bit more accurate.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: vme: Re-introduce necessary brackets
  Staging: iio: fix up the iio_get_new_idr_val comment
  Staging: add Add Sitecom WL-349 to rtl8192su
  Staging: rt2860: add Belkin F5D8055 Wireless-N USB Dongle device id
  staging: rtl8192su: add Support for Belkin F5D8053 v6
  Staging: dt3155: fix 50Hz configuration
  staging: usbip: Fix deadlock
  Staging: rtl8192su: add USB ID for 0bda:8171
  Staging: hv: name network device ethX rather than sethX
  Staging: hv: Fix up memory leak on HvCleanup
  Staging: hv: Fix a bug affecting IPv6
  staging: iio: ring_sw: Fix incorrect test on successful read of last value, causes infinite loop
  staging: iio: Function iio_get_new_idr_val() return negative value if fails.
  Staging: iio: adc: fix dangling pointers
  Staging: iio: light: fix dangling pointers
  Staging: iio: test for failed allocation
  staging: iio: lis3l02dq - incorrect ws used in container of call.

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  serial: drivers/serial/pmac_zilog.c: add missing unlock
  serial: 8250_pnp - add Fujitsu Wacom device
  tty: Fix regressions in the char driver conversion

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (29 commits)
  USB: sl811-hcd: Fix device disconnect
  USB: ohci-at91: fix power management hanging
  USB: rename usb_buffer_alloc() and usb_buffer_free()
  USB: ti_usb: fix printk format warning
  USB: gadget: s3c-hsotg: Add missing unlock
  USB: fix build on OMAPs if CONFIG_PM_RUNTIME is not set
  USB: oxu210hp: release spinlock on error path
  USB: serial: option: add cinterion device id
  USB: serial: option: ZTEAC8710 Support with Device ID 0xffff
  USB: serial: pl2303: Hybrid reader Uniform HCR331
  USB: option: add ID for ZTE MF 330
  USB: xhci: properly set endpoint context fields for periodic eps.
  USB: xhci: properly set the "Mult" field of the endpoint context.
  USB: OHCI: don't look at the root hub to get the number of ports
  USB: don't choose configs with no interfaces
  USB: cdc-acm: add another device quirk
  USB: fix testing the wrong variable in fs_create_by_name()
  usb: Fix tusb6010 for DMA API
  musb_core: fix musb_init_controller() error cleanup path
  MUSB: fix DaVinci glue layer dependency
  ...

Correct two mishaps which prevented reporting error type (CECC vs UECC)
and extended error description.

Cc: <stable@kernel.org> # 32.x,  33.x
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CONFIG_INOTIFY_USER defined but CONFIG_ANON_INODES undefined will result
in the following build failure:

    LD      vmlinux
  fs/built-in.o: In function 'sys_inotify_init1':
  (.text.sys_inotify_init1+0x22c): undefined reference to 'anon_inode_getfd'
  fs/built-in.o: In function `sys_inotify_init1':
  (.text.sys_inotify_init1+0x22c): relocation truncated to fit: R_MIPS_26 against 'anon_inode_getfd'
  make[2]: *** [vmlinux] Error 1
  make[1]: *** [sub-make] Error 2
  make: *** [all] Error 2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'merge' of git://git.secretlab.ca/git/linux-2.6:
  spi: spidev_test gives error upon 1-byte transfer
  omap2_mcspi: small fixes of output data format
  omap2_mcspi: Flush posted writes
  spi: spi_device memory should be released instead of device.
  spi: release device claimed by bus_find_device_by_name
  of: check for IS_ERR()
  serial/mpc52xx_uart: Drop outdated comments
  gpio: potential null dereference

Somehow I managed to remove a set of rather necessary brackets in commit
29848ac9. Put them back.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

improve the comment a bit

Cc: Greg KH <greg@kroah.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Sonic Zhang <sonic.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add usb id of Sitecom WL-349 to rtl8192su
Signed-off-by: Rodrigo Linfati <rodrigo@linfati.cl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add Belkin F5D8055 Wireless-N USB support to the rt2870
staging driver.
Signed-off-by: Chris Largret <largret@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Please find attached a patch which adds the device ID for the Belkin
F5D8053 v6 to the rtl8192su driver. I've tested this in 2.6.34-rc3
(Ubuntu 9.10 amd64) and the network adapter is working flawlessly.
Signed-off-by: Richard Airlie <richard@backtrace.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

According to the header file, dt3155_io.h, the 50/60 Hz configuration
is controlled by a bit in the I2C CSR2 register (bit 2).  The function
dt3155_init_isr actually reads the I2C CONFIG register into the global
I2C_CSR union variable then modifies the bit.  It then does a write
to the I2C CONFIG register with the global I2C_CONFIG union variable
which is not even set with a value anywhere in the driver.

My guess is 50Hz operation doesn't even work as-is.

Fix this by actually reading and writing the correct register with
the correct value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

When detaching a port from the client side (usbip --detach 0),
the event thread, on the server side, is going to deadlock.
The "eh" server thread is getting USBIP_EH_RESET event and calls:
  -> stub_device_reset() -> usb_reset_device()
the USB framework is then calling back _in the same "eh" thread_ :
  -> stub_disconnect() -> usbip_stop_eh() -> wait_for_completion()
the "eh" thread is being asleep forever, waiting for its own completion.
This patch checks if "eh" is the current thread, in usbip_stop_eh().
Signed-off-by: Eric Lescouet <eric@lescouet.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch makes the HyperV network device use the same naming scheme as
other virtual drivers (Xen, KVM). In an ideal world, userspace tools
would not care what the name is, but some users and applications do
care. Vyatta CLI is one of the tools that does depend on what the name
is.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Don't assign NULL too early
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix a bug affecting IPv6
Added the multicast flag for proper IPv6 function.
Reported-by: Toshikazu Sakai <toshikas@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is a bad one. The test means that almost no reads of the last
value ever succeed!  Result is an infinite loop.

Another one for the 'oops' category.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Function iio_get_new_idr_val() return negative value if fails.
So, only error when ret < 0 in iio_device_register_eventset().
Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix I2C-drivers which missed setting clientdata to NULL before freeing the
structure it points to. Also fix drivers which do this _after_ the structure
was freed already.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix I2C-drivers which missed setting clientdata to NULL before freeing the
structure it points to. Also fix drivers which do this _after_ the structure
was freed already.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

We should return test to see if iio_allocate_trigger() fails and return -ENOMEM.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The word oops comes to mind.  Original patch to merge the two work queues
in here (prior to Greg taking them into staging) changed the top half to
only use one of them and the bottom half to assume it was the other.

Currently causes a NULL pointer dereference if you enable any of the events
on an lis3l02dq. Just goes to show I need a few more regression tests.
Signed-of-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

A while ago I provided a patch that fixed device detection after device
removal (USB: sl811-hcd: Fix device disconnect).
Chris Brissette pointed out that the detection/removal counter method
to distinguish insert or remove my fail under certain conditions.
Latest SL811HS datasheet (Document 38-08008 Rev. *D) indicates that
bit 6 (SL11H_INTMASK_RD) of the Interrupt Status Register together with
bit 5 (SL11H_INTMASK_INSRMV) can be used to determine whether a device
has been inserted or removed.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

A hanging has been detected in ohci-at91 while going in suspend to ram. This is
due to asynchronous operations between ohci reset and ohci clocks shutdown.
This patch adds the reading of the control register between the reset of the
ohci and clocks stop. This "flush the writes" idea was taken from ohci-hcd.c
file (ohci_shutdown() function).
Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

For more clearance what the functions actually do,

  usb_buffer_alloc() is renamed to usb_alloc_coherent()
  usb_buffer_free()  is renamed to usb_free_coherent()

They should only be used in code which really needs DMA coherency.

[added compatibility macros so we can convert things easier - gregkh]
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Pedro Ribeiro <pedrib@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>