- 17 May, 2018 11 commits
-
-
Petr Machata authored
Split a reusable function ip6gre_tnl_copy_tnl_parm() from ip6gre_tnl_change(). This will allow ERSPAN-specific code to reuse the common parts while customizing the behavior for ERSPAN. Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by:
Petr Machata <petrm@mellanox.com> Acked-by:
William Tu <u9012063@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
The function ip6gre_tnl_link_config() is used for setting up configuration of both ip6gretap and ip6erspan tunnels. Split the function into the common part and the route-lookup part. The latter then takes the calculated header length as an argument. This split will allow the patches down the line to sneak in a custom header length computation for the ERSPAN tunnel. Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by:
-
Petr Machata authored
dev->needed_headroom is not primed until ip6_tnl_xmit(), so it starts out zero. Thus the call to skb_cow_head() fails to actually make sure there's enough headroom to push the ERSPAN headers to. That can lead to the panic cited below. (Reproducer below that). Fix by requesting either needed_headroom if already primed, or just the bare minimum needed for the header otherwise. [ 190.703567] kernel BUG at net/core/skbuff.c:104! [ 190.708384] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI [ 190.714007] Modules linked in: act_mirred cls_matchall ip6_gre ip6_tunnel tunnel6 gre sch_ingress vrf veth x86_pkg_temp_thermal mlx_platform nfsd e1000e leds_mlxcpld [ 190.728975] CPU: 1 PID: 959 Comm: kworker/1:2 Not tainted 4.17.0-rc4-net_master-custom-139 #10 [ 190.737647] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016 [ 190.747006] Workqueue: ipv6_addrconf addrconf_dad_work [ 190.752222] RIP: 0010:skb_panic+0xc3/0x100 [ 190.756358] RSP: 0018:ffff8801d54072f0 EFLAGS: 00010282 [ 190.761629] RAX: 0000000000000085 RBX: ffff8801c1a8ecc0 RCX: 0000000000000000 [ 190.768830] RDX: 0000000000000085 RSI: dffffc0000000000 RDI: ffffed003aa80e54 [ 190.776025] RBP: ffff8801bd1ec5a0 R08: ffffed003aabce19 R09: ffffed003aabce19 [ 190.783226] R10: 0000000000000001 R11: ffffed003aabce18 R12: ffff8801bf695dbe [ 190.790418] R13: 0000000000000084 R14: 00000000000006c0 R15: ffff8801bf695dc8 [ 190.797621] FS: 0000000000000000(0000) GS:ffff8801d5400000(0000) knlGS:0000000000000000 [ 190.805786] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 190.811582] CR2: 000055fa929aced0 CR3: 0000000003228004 CR4: 00000000001606e0 [ 190.818790] Call Trace: [ 190.821264] <IRQ> [ 190.823314] ? ip6erspan_tunnel_xmit+0x5e4/0x1982 [ip6_gre] [ 190.828940] ? ip6erspan_tunnel_xmit+0x5e4/0x1982 [ip6_gre] [ 190.834562] skb_push+0x78/0x90 [ 190.837749] ip6erspan_tunnel_xmit+0x5e4/0x1982 [ip6_gre] [ 190.843219] ? ip6gre_tunnel_ioctl+0xd90/0xd90 [ip6_gre] [ 190.848577] ? debug_check_no_locks_freed+0x210/0x210 [ 190.853679] ? debug_check_no_locks_freed+0x210/0x210 [ 190.858783] ? print_irqtrace_events+0x120/0x120 [ 190.863451] ? sched_clock_cpu+0x18/0x210 [ 190.867496] ? cyc2ns_read_end+0x10/0x10 [ 190.871474] ? skb_network_protocol+0x76/0x200 [ 190.875977] dev_hard_start_xmit+0x137/0x770 [ 190.880317] ? do_raw_spin_trylock+0x6d/0xa0 [ 190.884624] sch_direct_xmit+0x2ef/0x5d0 [ 190.888589] ? pfifo_fast_dequeue+0x3fa/0x670 [ 190.892994] ? pfifo_fast_change_tx_queue_len+0x810/0x810 [ 190.898455] ? __lock_is_held+0xa0/0x160 [ 190.902422] __qdisc_run+0x39e/0xfc0 [ 190.906041] ? _raw_spin_unlock+0x29/0x40 [ 190.910090] ? pfifo_fast_enqueue+0x24b/0x3e0 [ 190.914501] ? sch_direct_xmit+0x5d0/0x5d0 [ 190.918658] ? pfifo_fast_dequeue+0x670/0x670 [ 190.923047] ? __dev_queue_xmit+0x172/0x1770 [ 190.927365] ? preempt_count_sub+0xf/0xd0 [ 190.931421] __dev_queue_xmit+0x410/0x1770 [ 190.935553] ? ___slab_alloc+0x605/0x930 [ 190.939524] ? print_irqtrace_events+0x120/0x120 [ 190.944186] ? memcpy+0x34/0x50 [ 190.947364] ? netdev_pick_tx+0x1c0/0x1c0 [ 190.951428] ? __skb_clone+0x2fd/0x3d0 [ 190.955218] ? __copy_skb_header+0x270/0x270 [ 190.959537] ? rcu_read_lock_sched_held+0x93/0xa0 [ 190.964282] ? kmem_cache_alloc+0x344/0x4d0 [ 190.968520] ? cyc2ns_read_end+0x10/0x10 [ 190.972495] ? skb_clone+0x123/0x230 [ 190.976112] ? skb_split+0x820/0x820 [ 190.979747] ? tcf_mirred+0x554/0x930 [act_mirred] [ 190.984582] tcf_mirred+0x554/0x930 [act_mirred] [ 190.989252] ? tcf_mirred_act_wants_ingress.part.2+0x10/0x10 [act_mirred] [ 190.996109] ? __lock_acquire+0x706/0x26e0 [ 191.000239] ? sched_clock_cpu+0x18/0x210 [ 191.004294] tcf_action_exec+0xcf/0x2a0 [ 191.008179] tcf_classify+0xfa/0x340 [ 191.011794] __netif_receive_skb_core+0x8e1/0x1c60 [ 191.016630] ? debug_check_no_locks_freed+0x210/0x210 [ 191.021732] ? nf_ingress+0x500/0x500 [ 191.025458] ? process_backlog+0x347/0x4b0 [ 191.029619] ? print_irqtrace_events+0x120/0x120 [ 191.034302] ? lock_acquire+0xd8/0x320 [ 191.038089] ? process_backlog+0x1b6/0x4b0 [ 191.042246] ? process_backlog+0xc2/0x4b0 [ 191.046303] process_backlog+0xc2/0x4b0 [ 191.050189] net_rx_action+0x5cc/0x980 [ 191.053991] ? napi_complete_done+0x2c0/0x2c0 [ 191.058386] ? mark_lock+0x13d/0xb40 [ 191.062001] ? clockevents_program_event+0x6b/0x1d0 [ 191.066922] ? print_irqtrace_events+0x120/0x120 [ 191.071593] ? __lock_is_held+0xa0/0x160 [ 191.075566] __do_softirq+0x1d4/0x9d2 [ 191.079282] ? ip6_finish_output2+0x524/0x1460 [ 191.083771] do_softirq_own_stack+0x2a/0x40 [ 191.087994] </IRQ> [ 191.090130] do_softirq.part.13+0x38/0x40 [ 191.094178] __local_bh_enable_ip+0x135/0x190 [ 191.098591] ip6_finish_output2+0x54d/0x1460 [ 191.102916] ? ip6_forward_finish+0x2f0/0x2f0 [ 191.107314] ? ip6_mtu+0x3c/0x2c0 [ 191.110674] ? ip6_finish_output+0x2f8/0x650 [ 191.114992] ? ip6_output+0x12a/0x500 [ 191.118696] ip6_output+0x12a/0x500 [ 191.122223] ? ip6_route_dev_notify+0x5b0/0x5b0 [ 191.126807] ? ip6_finish_output+0x650/0x650 [ 191.131120] ? ip6_fragment+0x1a60/0x1a60 [ 191.135182] ? icmp6_dst_alloc+0x26e/0x470 [ 191.139317] mld_sendpack+0x672/0x830 [ 191.143021] ? igmp6_mcf_seq_next+0x2f0/0x2f0 [ 191.147429] ? __local_bh_enable_ip+0x77/0x190 [ 191.151913] ipv6_mc_dad_complete+0x47/0x90 [ 191.156144] addrconf_dad_completed+0x561/0x720 [ 191.160731] ? addrconf_rs_timer+0x3a0/0x3a0 [ 191.165036] ? mark_held_locks+0xc9/0x140 [ 191.169095] ? __local_bh_enable_ip+0x77/0x190 [ 191.173570] ? addrconf_dad_work+0x50d/0xa20 [ 191.177886] ? addrconf_dad_work+0x529/0xa20 [ 191.182194] addrconf_dad_work+0x529/0xa20 [ 191.186342] ? addrconf_dad_completed+0x720/0x720 [ 191.191088] ? __lock_is_held+0xa0/0x160 [ 191.195059] ? process_one_work+0x45d/0xe20 [ 191.199302] ? process_one_work+0x51e/0xe20 [ 191.203531] ? rcu_read_lock_sched_held+0x93/0xa0 [ 191.208279] process_one_work+0x51e/0xe20 [ 191.212340] ? pwq_dec_nr_in_flight+0x200/0x200 [ 191.216912] ? get_lock_stats+0x4b/0xf0 [ 191.220788] ? preempt_count_sub+0xf/0xd0 [ 191.224844] ? worker_thread+0x219/0x860 [ 191.228823] ? do_raw_spin_trylock+0x6d/0xa0 [ 191.233142] worker_thread+0xeb/0x860 [ 191.236848] ? process_one_work+0xe20/0xe20 [ 191.241095] kthread+0x206/0x300 [ 191.244352] ? process_one_work+0xe20/0xe20 [ 191.248587] ? kthread_stop+0x570/0x570 [ 191.252459] ret_from_fork+0x3a/0x50 [ 191.256082] Code: 14 3e ff 8b 4b 78 55 4d 89 f9 41 56 41 55 48 c7 c7 a0 cf db 82 41 54 44 8b 44 24 2c 48 8b 54 24 30 48 8b 74 24 20 e8 16 94 13 ff <0f> 0b 48 c7 c7 60 8e 1f 85 48 83 c4 20 e8 55 ef a6 ff 89 74 24 [ 191.275327] RIP: skb_panic+0xc3/0x100 RSP: ffff8801d54072f0 [ 191.281024] ---[ end trace 7ea51094e099e006 ]--- [ 191.285724] Kernel panic - not syncing: Fatal exception in interrupt [ 191.292168] Kernel Offset: disabled [ 191.295697] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Reproducer: ip link add h1 type veth peer name swp1 ip link add h3 type veth peer name swp3 ip link set dev h1 up ip address add 192.0.2.1/28 dev h1 ip link add dev vh3 type vrf table 20 ip link set dev h3 master vh3 ip link set dev vh3 up ip link set dev h3 up ip link set dev swp3 up ip address add dev swp3 2001:db8:2::1/64 ip link set dev swp1 up tc qdisc add dev swp1 clsact ip link add name gt6 type ip6erspan \ local 2001:db8:2::1 remote 2001:db8:2::2 oseq okey 123 ip link set dev gt6 up sleep 1 tc filter add dev swp1 ingress pref 1000 matchall skip_hw \ action mirred egress mirror dev gt6 ping -I h1 192.0.2.2 Fixes: e41c7c68 ("ip6erspan: make sure enough headroom at xmit.") Signed-off-by:
-
Petr Machata authored
__gre6_xmit() pushes GRE headers before handing over to ip6_tnl_xmit() for generic IP-in-IP processing. However it doesn't make sure that there is enough headroom to push the header to. That can lead to the panic cited below. (Reproducer below that). Fix by requesting either needed_headroom if already primed, or just the bare minimum needed for the header otherwise. [ 158.576725] kernel BUG at net/core/skbuff.c:104! [ 158.581510] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI [ 158.587174] Modules linked in: act_mirred cls_matchall ip6_gre ip6_tunnel tunnel6 gre sch_ingress vrf veth x86_pkg_temp_thermal mlx_platform nfsd e1000e leds_mlxcpld [ 158.602268] CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 4.17.0-rc4-net_master-custom-139 #10 [ 158.610938] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016 [ 158.620426] RIP: 0010:skb_panic+0xc3/0x100 [ 158.624586] RSP: 0018:ffff8801d3f27110 EFLAGS: 00010286 [ 158.629882] RAX: 0000000000000082 RBX: ffff8801c02cc040 RCX: 0000000000000000 [ 158.637127] RDX: 0000000000000082 RSI: dffffc0000000000 RDI: ffffed003a7e4e18 [ 158.644366] RBP: ffff8801bfec8020 R08: ffffed003aabce19 R09: ffffed003aabce19 [ 158.651574] R10: 000000000000000b R11: ffffed003aabce18 R12: ffff8801c364de66 [ 158.658786] R13: 000000000000002c R14: 00000000000000c0 R15: ffff8801c364de68 [ 158.666007] FS: 0000000000000000(0000) GS:ffff8801d5400000(0000) knlGS:0000000000000000 [ 158.674212] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 158.680036] CR2: 00007f4b3702dcd0 CR3: 0000000003228002 CR4: 00000000001606e0 [ 158.687228] Call Trace: [ 158.689752] ? __gre6_xmit+0x246/0xd80 [ip6_gre] [ 158.694475] ? __gre6_xmit+0x246/0xd80 [ip6_gre] [ 158.699141] skb_push+0x78/0x90 [ 158.702344] __gre6_xmit+0x246/0xd80 [ip6_gre] [ 158.706872] ip6gre_tunnel_xmit+0x3bc/0x610 [ip6_gre] [ 158.711992] ? __gre6_xmit+0xd80/0xd80 [ip6_gre] [ 158.716668] ? debug_check_no_locks_freed+0x210/0x210 [ 158.721761] ? print_irqtrace_events+0x120/0x120 [ 158.726461] ? sched_clock_cpu+0x18/0x210 [ 158.730572] ? sched_clock_cpu+0x18/0x210 [ 158.734692] ? cyc2ns_read_end+0x10/0x10 [ 158.738705] ? skb_network_protocol+0x76/0x200 [ 158.743216] ? netif_skb_features+0x1b2/0x550 [ 158.747648] dev_hard_start_xmit+0x137/0x770 [ 158.752010] sch_direct_xmit+0x2ef/0x5d0 [ 158.755992] ? pfifo_fast_dequeue+0x3fa/0x670 [ 158.760460] ? pfifo_fast_change_tx_queue_len+0x810/0x810 [ 158.765975] ? __lock_is_held+0xa0/0x160 [ 158.770002] __qdisc_run+0x39e/0xfc0 [ 158.773673] ? _raw_spin_unlock+0x29/0x40 [ 158.777781] ? pfifo_fast_enqueue+0x24b/0x3e0 [ 158.782191] ? sch_direct_xmit+0x5d0/0x5d0 [ 158.786372] ? pfifo_fast_dequeue+0x670/0x670 [ 158.790818] ? __dev_queue_xmit+0x172/0x1770 [ 158.795195] ? preempt_count_sub+0xf/0xd0 [ 158.799313] __dev_queue_xmit+0x410/0x1770 [ 158.803512] ? ___slab_alloc+0x605/0x930 [ 158.807525] ? ___slab_alloc+0x605/0x930 [ 158.811540] ? memcpy+0x34/0x50 [ 158.814768] ? netdev_pick_tx+0x1c0/0x1c0 [ 158.818895] ? __skb_clone+0x2fd/0x3d0 [ 158.822712] ? __copy_skb_header+0x270/0x270 [ 158.827079] ? rcu_read_lock_sched_held+0x93/0xa0 [ 158.831903] ? kmem_cache_alloc+0x344/0x4d0 [ 158.836199] ? skb_clone+0x123/0x230 [ 158.839869] ? skb_split+0x820/0x820 [ 158.843521] ? tcf_mirred+0x554/0x930 [act_mirred] [ 158.848407] tcf_mirred+0x554/0x930 [act_mirred] [ 158.853104] ? tcf_mirred_act_wants_ingress.part.2+0x10/0x10 [act_mirred] [ 158.860005] ? __lock_acquire+0x706/0x26e0 [ 158.864162] ? mark_lock+0x13d/0xb40 [ 158.867832] tcf_action_exec+0xcf/0x2a0 [ 158.871736] tcf_classify+0xfa/0x340 [ 158.875402] __netif_receive_skb_core+0x8e1/0x1c60 [ 158.880334] ? nf_ingress+0x500/0x500 [ 158.884059] ? process_backlog+0x347/0x4b0 [ 158.888241] ? lock_acquire+0xd8/0x320 [ 158.892050] ? process_backlog+0x1b6/0x4b0 [ 158.896228] ? process_backlog+0xc2/0x4b0 [ 158.900291] process_backlog+0xc2/0x4b0 [ 158.904210] net_rx_action+0x5cc/0x980 [ 158.908047] ? napi_complete_done+0x2c0/0x2c0 [ 158.912525] ? rcu_read_unlock+0x80/0x80 [ 158.916534] ? __lock_is_held+0x34/0x160 [ 158.920541] __do_softirq+0x1d4/0x9d2 [ 158.924308] ? trace_event_raw_event_irq_handler_exit+0x140/0x140 [ 158.930515] run_ksoftirqd+0x1d/0x40 [ 158.934152] smpboot_thread_fn+0x32b/0x690 [ 158.938299] ? sort_range+0x20/0x20 [ 158.941842] ? preempt_count_sub+0xf/0xd0 [ 158.945940] ? schedule+0x5b/0x140 [ 158.949412] kthread+0x206/0x300 [ 158.952689] ? sort_range+0x20/0x20 [ 158.956249] ? kthread_stop+0x570/0x570 [ 158.960164] ret_from_fork+0x3a/0x50 [ 158.963823] Code: 14 3e ff 8b 4b 78 55 4d 89 f9 41 56 41 55 48 c7 c7 a0 cf db 82 41 54 44 8b 44 24 2c 48 8b 54 24 30 48 8b 74 24 20 e8 16 94 13 ff <0f> 0b 48 c7 c7 60 8e 1f 85 48 83 c4 20 e8 55 ef a6 ff 89 74 24 [ 158.983235] RIP: skb_panic+0xc3/0x100 RSP: ffff8801d3f27110 [ 158.988935] ---[ end trace 5af56ee845aa6cc8 ]--- [ 158.993641] Kernel panic - not syncing: Fatal exception in interrupt [ 159.000176] Kernel Offset: disabled [ 159.003767] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Reproducer: ip link add h1 type veth peer name swp1 ip link add h3 type veth peer name swp3 ip link set dev h1 up ip address add 192.0.2.1/28 dev h1 ip link add dev vh3 type vrf table 20 ip link set dev h3 master vh3 ip link set dev vh3 up ip link set dev h3 up ip link set dev swp3 up ip address add dev swp3 2001:db8:2::1/64 ip link set dev swp1 up tc qdisc add dev swp1 clsact ip link add name gt6 type ip6gretap \ local 2001:db8:2::1 remote 2001:db8:2::2 ip link set dev gt6 up sleep 1 tc filter add dev swp1 ingress pref 1000 matchall skip_hw \ action mirred egress mirror dev gt6 ping -I h1 192.0.2.2 Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by:
-
William Tu authored
ERSPAN only support version 1 and 2. When packets send to an erspan device which does not have proper version number set, drop the packet. In real case, we observe multicast packets sent to the erspan pernet device, erspan0, which does not have erspan version configured. Reported-by:
Greg Rose <gvrose8192@gmail.com> Signed-off-by:
-
David S. Miller authored
Thomas Falcon says: ==================== ibmvnic: Fix bugs and memory leaks This is a small patch series fixing up some bugs and memory leaks in the ibmvnic driver. The first fix frees up previously allocated memory that should be freed in case of an error. The second fixes a reset case that was failing due to TX/RX queue IRQ's being erroneously disabled without being enabled again. The final patch fixes incorrect reallocated of statistics buffers during a device reset, resulting in loss of statistics information and a memory leak. ==================== Signed-off-by: -
Thomas Falcon authored
Move initialization of statistics buffers from ibmvnic_init function into ibmvnic_probe. In the current state, ibmvnic_init will be called again during a device reset, resulting in the allocation of new buffers without freeing the old ones. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
-
Thomas Falcon authored
It is not necessary to disable interrupt lines here during a reset to handle a non-fatal firmware error. Move that call within the code block that handles the other cases that do require interrupts to be disabled and re-enabled. Signed-off-by:
-
Thomas Falcon authored
If the firmware map fails for whatever reason, remember to free up the memory after. Signed-off-by:
-
David Ahern authored
Updating the FIB tracepoint for the recent change to allow rules using the protocol and ports exposed a few places where the entries in the flow struct are not initialized. For __fib_validate_source add the call to fib4_rules_early_flow_dissect since it is invoked for the input path. For netfilter, add the memset on the flow struct to avoid future problems like this. In ip_route_input_slow need to set the fields if the skb dissection does not happen. Fixes: bfff4862 ("net: fib_rules: support for match on ip_proto, sport and dport") Signed-off-by:
David Ahern <dsahern@gmail.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Matt Mullins authored
scatterlist code expects virt_to_page() to work, which fails with CONFIG_VMAP_STACK=y. Fixes: c46234eb ("tls: RX path for ktls") Signed-off-by:
Matt Mullins <mmullins@fb.com> Signed-off-by:
-
- 16 May, 2018 15 commits
-
-
Jason Wang authored
After commit b196d88a ("tun: fix use after free for ptr_ring") we need clean up tx ring during release(). But unfortunately, it tries to do the cleanup blindly after socket were destroyed which will lead another use-after-free. Fix this by doing the cleanup before dropping the last reference of the socket in __tun_detach(). Reported-by:
Andrei Vagin <avagin@virtuozzo.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
David S. Miller authored
Michal Kalderon says: ==================== qed: LL2 fixes This series fixes some issues in ll2 related to synchronization and resource freeing ==================== Signed-off-by:
Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
-
Michal Kalderon authored
Stress on qedi/qedr load unload lead to list_del corruption. This is due to ll2 connection terminate freeing resources without verifying that no more ll2 processing will occur. This patch unregisters the ll2 status block before terminating the connection to assure this race does not occur. Fixes: 1d6cff4f ("qed: Add iSCSI out of order packet handling") Signed-off-by:
-
Michal Kalderon authored
The ll2 flows of flushing the txq/rxq need to be synchronized with the regular fp processing. Caused list corruption during load/unload stress tests. Fixes: 0a7fb11c ("qed: Add Light L2 support") Signed-off-by:
-
Michal Kalderon authored
Driver should free all pending isles once it gets a FLUSH cqe from FW. Part of iSCSI out of order flow. Fixes: 1d6cff4f ("qed: Add iSCSI out of order packet handling") Signed-off-by:
-
Davide Caratti authored
Similarly to what was done with commit a52956df ("net sched actions: fix refcnt leak in skbmod"), fix the error path of tcf_vlan_init() to avoid refcnt leaks when wrong value of TCA_VLAN_PUSH_VLAN_PROTOCOL is given. Fixes: 5026c9b1 ("net sched: vlan action fix late binding") CC: Roman Mashak <mrv@mojatatu.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Geert Uytterhoeven authored
The configuration settings for RBTX4927 were accidentally removed, leading to a silently broken network interface. Re-add the missing settings to fix this. Fixes: 8eb97ff5 ("net: 8390: remove m32r specific bits") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: bcm_sf2: CFP fixes This patch series fixes a number of usability issues with the SF2 Compact Field Processor code: - we would not be properly bound checking the location when we let the kernel automatically place rules with RX_CLS_LOC_ANY - when using IPv6 rules and user space specifies a location identifier we would be off by one in what the chain ID (within the Broadcom tag) indicates - it would be possible to delete one of the two slices of an IPv6 while leaving the other one programming leading to various problems ==================== Signed-off-by: -
Florian Fainelli authored
It was possible to delete only one half of an IPv6, which would leave the second half still programmed and possibly in use. Instead of checking for the unused bitmap, we need to check the unique bitmap, and refuse any deletion that does not match that criteria. We also need to move that check from bcm_sf2_cfp_rule_del_one() into its caller: bcm_sf2_cfp_rule_del() otherwise we would not be able to delete second halves anymore that would not pass the first test. Fixes: ba0696c2 ("net: dsa: bcm_sf2: Add support for IPv6 CFP rules") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
We had several issues that would make the programming of IPv6 rules both inconsistent and error prone: - the chain ID that we would be asking the hardware to put in the packet's Broadcom tag would be off by one, it would return one of the two indexes, but not the one user-space specified - when an user specified a particular location to insert a CFP rule at, we would not be returning the same index, which would be confusing if nothing else - finally, like IPv4, it would be possible to overflow the last entry by re-programming it Fix this by swapping the usage of rule_index[0] and rule_index[1] where relevant in order to return a consistent and correct user-space experience. Fixes: ba0696c2 ("net: dsa: bcm_sf2: Add support for IPv6 CFP rules") Signed-off-by:
-
Florian Fainelli authored
When we let the kernel pick up a rule location with RX_CLS_LOC_ANY, we would be able to overwrite the last rules because of a number of issues. The IPv4 code path would not be checking that rule_index is within bounds, and it would also only be allowed to pick up rules from range 0..126 instead of the full 0..127 range. This would lead us to allow overwriting the last rule when we let the kernel pick-up the location. Fixes: 33061458 ("net: dsa: bcm_sf2: Move IPv4 CFP processing to specific functions") Signed-off-by:
-
Markus Niebel authored
The micrel KSZ9031 phy has a optional clock pin (CLK125_NDO) which can be used as reference clock for the MAC unit. The clock signal must meet the RGMII requirements to ensure the correct data transmission between the MAC and the PHY. The KSZ9031 phy does not fulfill the duty cycle requirement if the phy is configured as slave. For a complete describtion look at the errata sheets: DS80000691D or DS80000692D. The errata sheet recommends to force the phy into master mode whenever there is a 1000Base-T link-up as work around. Only set the "micrel,force-master" property if you use the phy reference clock provided by CLK125_NDO pin as MAC reference clock in your application. Attenation, this workaround is only usable if the link partner can be configured to slave mode for 1000Base-T. Signed-off-by:
Markus Niebel <Markus.Niebel@tqs.de> [m.felsch@pengutronix.de: fix dt-binding documentation] [m.felsch@pengutronix.de: use already existing result var for read/write] [m.felsch@pengutronix.de: add error handling] [m.felsch@pengutronix.de: add more comments] Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Eric Dumazet authored
syzkaller found a reliable way to crash the host, hitting a BUG() in __tcp_retransmit_skb() Malicous MSG_FASTOPEN is the root cause. We need to purge write queue in tcp_connect_init() at the point we init snd_una/write_seq. This patch also replaces the BUG() by a less intrusive WARN_ON_ONCE() kernel BUG at net/ipv4/tcp_output.c:2837! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 5276 Comm: syz-executor0 Not tainted 4.17.0-rc3+ #51 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__tcp_retransmit_skb+0x2992/0x2eb0 net/ipv4/tcp_output.c:2837 RSP: 0000:ffff8801dae06ff8 EFLAGS: 00010206 RAX: ffff8801b9fe61c0 RBX: 00000000ffc18a16 RCX: ffffffff864e1a49 RDX: 0000000000000100 RSI: ffffffff864e2e12 RDI: 0000000000000005 RBP: ffff8801dae073a0 R08: ffff8801b9fe61c0 R09: ffffed0039c40dd2 R10: ffffed0039c40dd2 R11: ffff8801ce206e93 R12: 00000000421eeaad R13: ffff8801ce206d4e R14: ffff8801ce206cc0 R15: ffff8801cd4f4a80 FS: 0000000000000000(0000) GS:ffff8801dae00000(0063) knlGS:00000000096bc900 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 0000000020000000 CR3: 00000001c47b6000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> tcp_retransmit_skb+0x2e/0x250 net/ipv4/tcp_output.c:2923 tcp_retransmit_timer+0xc50/0x3060 net/ipv4/tcp_timer.c:488 tcp_write_timer_handler+0x339/0x960 net/ipv4/tcp_timer.c:573 tcp_write_timer+0x111/0x1d0 net/ipv4/tcp_timer.c:593 call_timer_fn+0x230/0x940 kernel/time/timer.c:1326 expire_timers kernel/time/timer.c:1363 [inline] __run_timers+0x79e/0xc50 kernel/time/timer.c:1666 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1d1/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:525 [inline] smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863 Fixes: cf60af03 ("net-tcp: Fast Open client - sendmsg(MSG_FASTOPEN)") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Saeed Mahameed authored
Avoid using the kernel's irq_descriptor and return IRQ vector affinity directly from the driver. This fixes the following build break when CONFIG_SMP=n include/linux/mlx5/driver.h: In function ‘mlx5_get_vector_affinity_hint’: include/linux/mlx5/driver.h:1299:13: error: ‘struct irq_desc’ has no member named ‘affinity_hint’ Fixes: 6082d9c9 ("net/mlx5: Fix mlx5_get_vector_affinity function") Signed-off-by:Saeed Mahameed <saeedm@mellanox.com> CC: Randy Dunlap <rdunlap@infradead.org> CC: Guenter Roeck <linux@roeck-us.net> CC: Thomas Gleixner <tglx@linutronix.de> Tested-by:
Israel Rukshin <israelr@mellanox.com> Reported-by:
kbuild test robot <lkp@intel.com> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Tested-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Keefe Liu authored
When master device's mac has been changed, the commit 32c10bbf ("ipvlan: always use the current L2 addr of the master") makes the IPVlan devices's mac changed also, but it doesn't do related works such as flush the IPVlan devices's arp table. Signed-off-by:
Keefe Liu <liuqifa@huawei.com> Signed-off-by:
-
- 15 May, 2018 3 commits
-
-
hpreg@vmware.com authored
The gen bits must be read first from (resp. written last to) DMA memory. The proper way to enforce this on Linux is to call dma_rmb() (resp. dma_wmb()). Signed-off-by:
Regis Duchesne <hpreg@vmware.com> Acked-by:
Ronak Doshi <doshir@vmware.com> Signed-off-by:
-
hpreg@vmware.com authored
The DMA mask must be set before, not after, the first DMA map operation, or the first DMA map operation could in theory fail on some systems. Fixes: b0eb57cb ("VMXNET3: Add support for virtual IOMMU") Signed-off-by:
-
Kumar Sanghvi authored
Earlier code of doing bitwise AND with field width bits was wrong. Instead, simplify code to calculate ntuple_mask based on supplied fields and then compare with mask configured in hw - which is the correct and simpler way to validate ntuple mask. Fixes: 3eb8b62d ("cxgb4: add support to create hash-filters via tc-flower offload") Signed-off-by:
Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
- 14 May, 2018 8 commits
-
-
Eric Biggers authored
It's possible to crash the kernel in several different ways by sending messages to the SMC_PNETID generic netlink family that are missing the expected attributes: - Missing SMC_PNETID_NAME => null pointer dereference when comparing names. - Missing SMC_PNETID_ETHNAME => null pointer dereference accessing smc_pnetentry::ndev. - Missing SMC_PNETID_IBNAME => null pointer dereference accessing smc_pnetentry::smcibdev. - Missing SMC_PNETID_IBPORT => out of bounds array access to smc_ib_device::pattr[-1]. Fix it by validating that all expected attributes are present and that SMC_PNETID_IBPORT is nonzero. Reported-by: syzbot+5cd61039dc9b8bfa6e47@syzkaller.appspotmail.com Fixes: 6812baab ("smc: establish pnet table management") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Tarick Bedeir authored
Avoid exiting the function with a lingering sysfs file (if the first call to device_create_file() fails while the second succeeds), and avoid calling devlink_port_unregister() twice. In other words, either mlx4_init_port_info() succeeds and returns zero, or it fails, returns non-zero, and requires no cleanup. Fixes: 096335b3 ("mlx4_core: Allow dynamic MTU configuration for IB ports") Signed-off-by:
Tarick Bedeir <tarick@google.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Jason Wang authored
We used to initialize ptr_ring during TUNSETIFF, this is because its size depends on the tx_queue_len of netdevice. And we try to clean it up when socket were detached from netdevice. A race were spotted when trying to do uninit during a read which will lead a use after free for pointer ring. Solving this by always initialize a zero size ptr_ring in open() and do resizing during TUNSETIFF, and then we can safely do cleanup during close(). With this, there's no need for the workaround that was introduced by commit 4df0bfc7 ("tun: fix a memory leak for tfile->tx_array"). Reported-by: syzbot+e8b902c3c3fadf0a9dba@syzkaller.appspotmail.com Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> Fixes: 1576d986 ("tun: switch to use skb array for tx") Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-05-14 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix nfp to allow zero-length BPF capabilities, meaning the nfp capability parsing loop will otherwise exit early if the last capability is zero length and therefore driver will fail to probe with an error such as: nfp: BPF capabilities left after parsing, parsed:92 total length:100 nfp: invalid BPF capabilities at offset:92 Fix from Jakub. 2) libbpf's bpf_object__open() may return IS_ERR_OR_NULL() and not just an error. Fix libbpf's bpf_prog_load_xattr() to handle that case as well, also from Jakub. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree, they are: 1) Fix handling of simultaneous open TCP connection in conntrack, from Jozsef Kadlecsik. 2) Insufficient sanitify check of xtables extension names, from Florian Westphal. 3) Skip unnecessary synchronize_rcu() call when transaction log is already empty, from Florian Westphal. 4) Incorrect destination mac validation in ebt_stp, from Stephen Hemminger. 5) xtables module reference counter leak in nft_compat, from Florian Westphal. 6) Incorrect connection reference counting logic in IPVS one-packet scheduler, from Julian Anastasov. 7) Wrong stats for 32-bits CPU in IPVS, also from Julian. 8) Calm down sparse error in netfilter core, also from Florian. 9) Use nla_strlcpy to fix compilation warning in nfnetlink_acct and nfnetlink_cthelper, again from Florian. 10) Missing module alias in icmp and icmp6 xtables extensions, from Florian Westphal. 11) Base chain statistics in nf_tables may be unset/null, from Florian. 12) Fix handling of large matchinfo size in nft_compat, this includes one preparation for before this fix. From Florian. 13) Fix bogus EBUSY error when deleting chains due to incorrect reference counting from the preparation phase of the two-phase commit protocol. ==================== Signed-off-by: -
Michal Kalderon authored
Rebooting while qedr is loaded with a VLAN interface present results in unregister_netdevice waiting for the usage count to become free. The fix is that rdma devices should be removed before unregistering the netdevice, to assure all references to ndev are decreased. Fixes: cee9fbd8 ("qede: Add qedr framework") Signed-off-by:
-
Christoph Hellwig authored
This driver supports EISA devices in addition to PCI devices, and relied on the legacy behavior of the pci_dma* shims to pass on a NULL pointer to the DMA API, and the DMA API being able to handle that. When the NULL forwarding broke the EISA support got broken. Fix this by converting to the DMA API instead of the legacy PCI shims. Fixes: 4167b2ad ("PCI: Remove NULL device handling from PCI DMA API") Reported-by:
tedheadster <tedheadster@gmail.com> Tested-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Willem de Bruijn authored
Packet sockets allow construction of packets shorter than dev->hard_header_len to accommodate protocols with variable length link layer headers. These packets are padded to dev->hard_header_len, because some device drivers interpret that as a minimum packet size. packet_snd reserves dev->hard_header_len bytes on allocation. SOCK_DGRAM sockets call skb_push in dev_hard_header() to ensure that link layer headers are stored in the reserved range. SOCK_RAW sockets do the same in tpacket_snd, but not in packet_snd. Syzbot was able to send a zero byte packet to a device with massive 116B link layer header, causing padding to cross over into skb_shinfo. Fix this by writing from the start of the llheader reserved range also in the case of packet_snd/SOCK_RAW. Update skb_set_network_header to the new offset. This also corrects it for SOCK_DGRAM, where it incorrectly double counted reserve due to the skb_push in dev_hard_header. Fixes: 9ed988cd ("packet: validate variable length ll headers") Reported-by: syzbot+71d74a5406d02057d559@syzkaller.appspotmail.com Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
- 13 May, 2018 1 commit
-
-
Colin Ian King authored
Currently the -EBUSY error return path is not free'ing resources allocated earlier, leaving a memory leak. Fix this by exiting via the error exit label err5 that performs the necessary resource clean up. Detected by CoverityScan, CID#1432975 ("Resource leak") Fixes: 9744a6fc ("netfilter: nf_tables: check if same extensions are set when adding elements") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
- 11 May, 2018 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Verify lengths of keys provided by the user is AF_KEY, from Kevin Easton. 2) Add device ID for BCM89610 PHY. Thanks to Bhadram Varka. 3) Add Spectre guards to some ATM code, courtesy of Gustavo A. R. Silva. 4) Fix infinite loop in NSH protocol code. To Eric Dumazet we are most grateful for this fix. 5) Line up /proc/net/netlink headers properly. This fix from YU Bo, we do appreciate. 6) Use after free in TLS code. Once again we are blessed by the honorable Eric Dumazet with this fix. 7) Fix regression in TLS code causing stalls on partial TLS records. This fix is bestowed upon us by Andrew Tomt. 8) Deal with too small MTUs properly in LLC code, another great gift from Eric Dumazet. 9) Handle cached route flushing properly wrt. MTU locking in ipv4, to Hangbin Liu we give thanks for this. 10) Fix regression in SO_BINDTODEVIC handling wrt. UDP socket demux. Paolo Abeni, he gave us this. 11) Range check coalescing parameters in mlx4 driver, thank you Moshe Shemesh. 12) Some ipv6 ICMP error handling fixes in rxrpc, from our good brother David Howells. 13) Fix kexec on mlx5 by freeing IRQs in shutdown path. Daniel Juergens, you're the best! 14) Don't send bonding RLB updates to invalid MAC addresses. Debabrata Benerjee saved us! 15) Uh oh, we were leaking in udp_sendmsg and ping_v4_sendmsg. The ship is now water tight, thanks to Andrey Ignatov. 16) IPSEC memory leak in ixgbe from Colin Ian King, man we've got holes everywhere! 17) Fix error path in tcf_proto_create, Jiri Pirko what would we do without you! * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (92 commits) net sched actions: fix refcnt leak in skbmod net: sched: fix error path in tcf_proto_create() when modules are not configured net sched actions: fix invalid pointer dereferencing if skbedit flags missing ixgbe: fix memory leak on ipsec allocation ixgbevf: fix ixgbevf_xmit_frame()'s return type ixgbe: return error on unsupported SFP module when resetting ice: Set rq_last_status when cleaning rq ipv4: fix memory leaks in udp_sendmsg, ping_v4_sendmsg mlxsw: core: Fix an error handling path in 'mlxsw_core_bus_device_register()' bonding: send learning packets for vlans on slave bonding: do not allow rlb updates to invalid mac net/mlx5e: Err if asked to offload TC match on frag being first net/mlx5: E-Switch, Include VF RDMA stats in vport statistics net/mlx5: Free IRQs in shutdown path rxrpc: Trace UDP transmission failure rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages rxrpc: Fix the min security level for kernel calls rxrpc: Fix error reception on AF_INET6 sockets rxrpc: Fix missing start of call timeout qed: fix spelling mistake: "taskelt" -> "tasklet" ... -
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull NFS client fixes from Anna Schumaker: "These patches fix both a possible corruption during NFSoRDMA MR recovery, and a sunrpc tracepoint crash. Additionally, Trond has a new email address to put in the MAINTAINERS file" * tag 'nfs-for-4.17-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: Change Trond's email address in MAINTAINERS sunrpc: Fix latency trace point crashes xprtrdma: Fix list corruption / DMAR errors during MR recovery
-
