- 04 Oct, 2021 18 commits
-
-
Prabhakar Kushwaha authored
Initialize 2 MSL timeout value used for the TCP TIME_WAIT state to non-zero default. This patch also removes magic number from qedi/qedi_main.c. Reviewed-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
Nikolay Assa <nassa@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
Shai Malin <smalin@marvell.com> Signed-off-by:
Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by:
Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Assa authored
Update TCP silly-window-syndrome timeout, for the cases where initiator's small TCP window size prevents FW from transmitting packets on the connection. Timeout causes FW to retransmit window probes if needed, preventing I/O stall if initiator ignores first window probe. Reviewed-by:
-
Prabhakar Kushwaha authored
qed_debug features are updated to support FW version 8.59.1.0 along with few enhancements. - Removal of _BB_K2 from register defines. - Add new condition cond14. - Add dump of new area sw-platform, epoch, iscsi_task_pages, fcoe_task_pages, roce_task_pages and eth_task_pages. - Introduced new functions qed_dbg_phy_size(). - Update in qed_mcp_nvm_rd_cmd() declaration. - Allow QED to control init/exit at pf level. - Dump partial "ILT-dump" if buffer size is not sufficient. This patch also fixes the existing checkpatch warnings and few important checks. Signed-off-by: -
Prabhakar Kushwaha authored
GTT (Global translation table) is a fast-access window in the BAR into the register space, which only maps certain register addresses. This change helps enforce that only those addresses which are indeed mapped by the GTT are being accessed through it. Adding the '_GTT' suffix to the IRO FW memory (“RAM”) macros that access GTT-able region in FW memories (“RAM”) and use GTT macros to access RAM BAR from drivers. Signed-off-by:
-
Omkar Kulkarni authored
The qed_init_fw_func.c and qed_init_ops.c updated to support FW version 8.59.1.0. - Support 16-bit VPORT WFQ (weighted fair queueing) weights. - Support WFQ (weighted fair queueing) weight per VPORT + TC. - Support allocation of Tx PQs(physical queues) per PF,VF. - Modify Global RL (rate limiter) upper bound configuration. - Update FW operation functions. - Update iro_arr[] array. This patch also fixes the existing checkpatch warnings and few important checks. Signed-off-by:
-
Prabhakar Kushwaha authored
qed_iro_hsi.h contains HSI changes related to storm memories access. Existing code is based on hard-coded index. Use enum as defined for FW HSI 8.59.1.0, instead of hard-coded index. This patch also removes unnecessary header file inclusion. Signed-off-by:
-
Prabhakar Kushwaha authored
The qed_hsi.h has been updated to support new FW version 8.59.1.0 with changes. - Updates FW HSI (Hardware Software interface) structures. - Addition/update in function declaration and defines as per HSI. - Add generic infrastructure for FW error reporting as part of common event queue handling. - Move malicious VF error reporting to FW error reporting infrastructure. - Move consolidation queue initialization from FW context to ramrod message. qed_hsi.h header file changes lead to change in many files to ensure compilation. This patch also fixes the existing checkpatch warnings and few important checks. Signed-off-by:
-
Prabhakar Kushwaha authored
The qed_mfw_hsi.h contains HSI (Hardware Software Interface) changes related to management firmware. It has been updated to support new FW version 8.59.1.0 with below changes. - New defines for VF bitmap. - fec_mode and extended_speed defines updated in struct eth_phy_cfg. - Updated structutres lldp_system_tlvs_buffer_s, public_global, public_port, public_func, drv_union_data, public_drv_mb with all dependent new structures. - Updates in NVM related structures and defines. - Msg defines are added in enum drv_msg_code and fw_msg_code. - Updated/added new defines. This patch also fixes the existing checkpatch warnings and few important checks. Signed-off-by:
-
Prabhakar Kushwaha authored
The common_hsi.h has been updated for FW version 8.59.1.0 with below changes. - FW and Tools version. - New structures related to search table, packet duplication. - Structure for doorbell address for legacy mode without DEM. - Enhanced union rdma_eqe_data for RoCE Suspend Event Data. - New defines. This patch also fixes the existing checkpatch warnings and few important checks. Signed-off-by:
-
Omkar Kulkarni authored
The qed_hsi.h is a huge header file containing HSI (Hardware Software Interface) definitions of storm memory access, debug related, general and management firmware specific. In order to have a better code-organization HSI definition, this patch split the code across multiple files, i.e. - storm memory access HSI : qed_iro_hsi.h - debug related HSI : qed_dbg_hsi.h - Management firmware HSI : qed_mfg_hsi.h - General HSI : qed_hsi.h In addition, this patch also fixes existing checkpatch warnings and few important checks. Signed-off-by:
-
Shai Malin authored
The existing qed/qede/qedr/qedi/qedf code uses chip-specific naming in structures, functions, variables and defines in FW HSI (Hardware Software Interface). The new FW version introduced a generic naming convention in HSI in-which the same code will be used across different versions for simpler maintainability. It also eases in providing support for new features. With this patch every "_e4" or "e4_" prefix or suffix is not needed anymore and it will be removed. Reviewed-by:
Javed Hasan <jhasan@marvell.com> Signed-off-by:
-
Prabhakar Kushwaha authored
This patch fixes all the qed and qede kernel-doc warnings according to the guidelines that are described in Documentation/doc-guide/kernel-doc.rst. Signed-off-by:
-
David S. Miller authored
Justin Iurman says: ==================== Support for the ip6ip6 encapsulation of IOAM v2: - add prerequisite patches - keep uapi backwards compatible by adding two new attributes - add more comments to document the ioam6_iptunnel uapi In the current implementation, IOAM can only be inserted directly (i.e., only inside packets generated locally) by default, to be compliant with RFC8200. This patch adds support for in-transit packets and provides the ip6ip6 encapsulation of IOAM (RFC8200 compliant). Therefore, three ioam6 encap modes are defined: - inline: directly inserts IOAM inside packets (by default). - encap: ip6ip6 encapsulation of IOAM inside packets. - auto: either inline mode for packets generated locally or encap mode for in-transit packets. With current iproute2 implementation, it is configured this way: $ ip -6 r [...] encap ioam6 trace prealloc [...] The old syntax does not change (for backwards compatibility) and implicitly uses the inline mode. With the new syntax, an encap mode can be specified: (inline mode) $ ip -6 r [...] encap ioam6 mode inline trace prealloc [...] (encap mode) $ ip -6 r [...] encap ioam6 mode encap tundst fc00::2 trace prealloc [...] (auto mode) $ ip -6 r [...] encap ioam6 mode auto tundst fc00::2 trace prealloc [...] A tunnel destination address must be configured when using the encap mode or the auto mode. ==================== Signed-off-by: -
Justin Iurman authored
This patch adds support for testing the encap (ip6ip6) mode of IOAM. Signed-off-by:
Justin Iurman <justin.iurman@uliege.be> Signed-off-by:
-
Justin Iurman authored
This patch adds support for the ip6ip6 encapsulation by providing three encap modes: inline, encap and auto. Signed-off-by:
-
Justin Iurman authored
This prerequisite patch provides some minor edits (alignments, renames) and a minor modification inside a function to facilitate the next patch by using existing nla_* functions. Signed-off-by:
-
Justin Iurman authored
This patch anticipates the support for the IOAM insertion inside in-transit packets, by making a difference between input and output in order to determine the right value for its hop-limit (inherited from the IPv6 hop-limit). Input case: happens before ip6_forward, the IPv6 hop-limit is not decremented yet -> decrement the IOAM hop-limit to reflect the new hop inside the trace. Output case: happens after ip6_forward, the IPv6 hop-limit has already been decremented -> keep the same value for the IOAM hop-limit. Signed-off-by:
-
Eric Dumazet authored
This patch caches doorbell address directly in struct mlx4_en_tx_ring. This removes the need to bring in cpu caches whole struct mlx4_uar in fast path. Note that mlx4_uar is not guaranteed to be on a local node, because mlx4_bf_alloc() uses a single free list (priv->bf_list) regardless of its node parameter. This kind of change does matter in presence of light/moderate traffic. In high stress, this read-only line would be kept hot in caches. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
- 03 Oct, 2021 6 commits
-
-
David S. Miller authored
Jeremy Kerr says: ==================== MCTP kunit tests This change adds some initial kunit tests for the MCTP core. We'll expand the coverage in a future series, and augment with a few selftests, but this establishes a baseline set of tests for now. Thanks to the kunit folks for the framework! --- v2: - fix MCTP=m, KUNIT={y,m} breakage - fix mctp test netdev initialisation - strict route reference count checking ==================== Signed-off-by: -
Jeremy Kerr authored
Add multi-packet route input tests, for message reassembly. These will feed packets to be received by a bound socket, or dropped. Signed-off-by:
Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by:
-
Jeremy Kerr authored
Add a few tests for single-packet route inputs, testing the mctp_route_input function. Signed-off-by:
-
Jeremy Kerr authored
Add a few tests for the initial packet ingress through mctp_pkttype_receive function; mainly packet header sanity checks. Full input routing checks will be added as a separate change. Signed-off-by:
-
Jeremy Kerr authored
Add a new object for shared test utilities Signed-off-by:
-
Jeremy Kerr authored
This change adds the first kunit test for the mctp subsystem, and an initial test for the fragmentation path. We're adding tests under a new net/mctp/test/ directory. Incorporates a fix for module configs: Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
- 02 Oct, 2021 16 commits
-
-
M Chetan Kumar authored
1. Removed driver specific extra params like download_region, address & region_count. The required information is passed as part of flash API. 2. IOSM Devlink documentation updated to reflect the same. Signed-off-by:
M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== Use netdev->dev_addr write helpers (part 1) Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. This is the first installment of predictably tedious conversion. It tackles: memcpy(netdev->dev_addr, something, ETH_ADDR) and ether_addr_copy(netdev->dev_addr, something) replacing both with eth_hw_addr_set(). The first 7 patches are done entirely by sparse. Next 4 were semi-manual because the sparse conversion resulted in errors. ==================== Signed-off-by:
-
Jakub Kicinski authored
eth_hw_addr_set() takes a u8 pointer, like other etherdevice helpers. Convert the few drivers which require casts because they memcpy from "endian marked" types. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
Convert from memcpy(), include is needed. Signed-off-by:
-
Jakub Kicinski authored
Manual conversions because we need to get to the member which is inside an array to have a u8 pointer which eth_hw_addr_set() expects. Signed-off-by:
-
Jakub Kicinski authored
Convert chelsio drivers from memcpy() and ether_addr_copy() to eth_hw_addr_set(). They lack includes. Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Convert net/usb from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by:
-
Jakub Kicinski authored
Convert Ethernet from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by:
-
Jakub Kicinski authored
Convert from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Convert usb drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by:
-
Jakub Kicinski authored
Convert all Ethernet drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by:
-
Jakub Kicinski authored
Convert sw drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Convert misc arch drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Egress VLAN modification using VCAP ES0 on Ocelot switches This patch set adds support for modifying a VLAN ID at the egress stage of Ocelot/Felix switch ports. It is useful for replicating a packet on multiple ports, and each egress port sends it using a different VLAN ID. Tested by rewriting the VLAN ID of both (a) packets injected from the CPU port (b) packets received from an external station on a front-facing port Adding a selftest to make sure it doesn't bit-rot, and if it does, that it can be traced back easily. ==================== Signed-off-by: -
Vladimir Oltean authored
For this test we are exercising the VCAP ES0 block's ability to match on a packet with a given VLAN ID, and push an ES0 TAG A with a VID derived from VID_A_VAL plus the classified VLAN. $eth3.200 is the generator port $eth0 is the bridged DUT port that receives $eth1 is the bridged DUT port that forwards and rewrites VID 200 to 300 on egress via VCAP ES0 $eth2 is the port that receives from the DUT port $eth1 Since the egress rewriting happens outside the bridging service, VID 300 does not need to be in the bridge VLAN table of $eth1. Signed-off-by:Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
There will be one more VLAN modification selftest added, this time for egress. Rename the one that exists right now to be more specific. Signed-off-by:
-
