Skip to content

L
linux
Switch branch/tag
  1. 27 Mar, 2020 18 commits
  3. 26 Mar, 2020 12 commits
  5. 24 Mar, 2020 10 commits
    • Jakub Kicinski's avatar
      devlink: expand the devlink-info documentation · cd556e40
      Jakub Kicinski authored 
      We are having multiple review cycles with all vendors trying
to implement devlink-info. Let's expand the documentation with
more information about what's implemented and motivation behind
this interface in an attempt to make the implementations easier.

Describe what each info section is supposed to contain, and make
some references to other HW interfaces (PCI caps).

Document how firmware management is expected to look, to make
it clear how devlink-info and devlink-flash work in concert.

Name some future work.

v2: - improve wording
v3: - improve wording
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
Reviewed-by: default avatarRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cd556e40
    • Vladimir Oltean's avatar
      net: phy: mscc: consolidate a common RGMII delay implementation · 2283a02b
      Vladimir Oltean authored 
      It looks like the VSC8584 PHY driver is rolling its own RGMII delay
configuration code, despite the fact that the logic is mostly the same.

In fact only the register layout and position for the RGMII controls has
changed. So we need to adapt and parameterize the PHY-dependent bit
fields when calling the new generic function.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Tested-by: default avatarAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2283a02b
    • David S. Miller's avatar
      Merge branch 'axienet-Update-error-handling-and-add-64-bit-DMA-support' · 148aa2a8
      David S. Miller authored 
      Andre Przywara says:

====================
net: axienet: Update error handling and add 64-bit DMA support

a minor update, fixing the 32-bit build breakage, and brightening up
Dave's christmas tree. Rebased against latest net-next/master.

This series is based on net-next as of today (9970de8b), which
includes Russell's fixes [1], solving the SGMII issues I have had.

[1] https://lore.kernel.org/netdev/E1j6trA-0003GY-N1@rmk-PC.armlinux.org.uk/

Changelog v2 .. v3:
- Use two "left-shifts by 16" to fix builds with 32-bit phys_addr_t
- reorder variable declarations

Changelog v1 .. v2:
- Add Reviewed-by: tags from Radhey
- Extend kerndoc documentation
- Convert DMA error handler tasklet to work queue
- log DMA mapping errors
- mark DMA mapping error checks as unlikely (in "hot" paths)
- return NETDEV_TX_OK on TX DMA mapping error (increasing TX drop counter)
- Request eth IRQ as an optional IRQ
- Remove no longer needed MDIO IRQ register names
- Drop DT propery check for address width, assume full 64 bit

This series updates the Xilinx Axienet driver to work on our board
here. One big issue was broken SGMII support, which Russell fixed already
(in net-next).
While debugging and understanding the driver, I found several problems
in the error handling and cleanup paths, which patches 2-7 address.
Patch 8 removes a annoying error message, patch 9 paves the way for newer
revisions of the IP. The next patch adds mii-tool support, just for good
measure.

The next four patches add support for 64-bit DMA. This is an integration
option on newer IP revisions (>= v7.1), and expects MSB bits in formerly
reserved registers. Without writing to those MSB registers, the state
machine won't trigger, so it's mandatory to access them, even if they
are zero. Patches 11 and 12 prepare the code by adding accessors, to
wrap this properly and keep it working on older IP revisions.
Patch 13 enables access to the MSB registers, by trying to write a
non-zero value to them and checking if that sticks. Older IP revisions
always read those registers as zero.
Patch 14 then adjusts the DMA mask, based on the autodetected MSB
feature. It uses the full 64 bits in this case, the rest of the system
(actual physical addresses in use) should provide a natural limit if the
chip has connected fewer address lines. If not, the parent DT node can
use a dma-range property.

The Xilinx PG138 and PG021 documents (in versions 7.1 in both cases)
were used for this series.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      148aa2a8
    • Andre Przywara's avatar
      net: axienet: Allow DMA to beyond 4GB · 5fff0151
      Andre Przywara authored 
      With all DMA address accesses wrapped, we can actually support 64-bit
DMA if this option was chosen at IP integration time.
If the IP has been configured for an address width greater than 32 bits,
we assume the full 64 bit DMA width is working. In practise this will be
limited by the actual system address bus width, which will ideally be the
same as the DMA IP address width.
If this is not the case, the actual width can still be configured using a
dma-ranges property in the parent of the MAC node.

This increases the DMA mask on those systems to let the kernel choose
buffers from memory at higher addresses.
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5fff0151
    • Andre Przywara's avatar
      net: axienet: Autodetect 64-bit DMA capability · f735c40e
      Andre Przywara authored 
      When newer revisions of the Axienet IP are configured for a 64-bit bus,
we *need* to write to the MSB part of the an address registers,
otherwise the IP won't recognise this as a DMA start condition.
This is even true when the actual DMA address comes from the lower 4 GB.

To autodetect this configuration, at probe time we write all 1's to such
an MSB register, and see if any bits stick. If this is configured for a
32-bit bus, those MSB registers are RES0, so reading back 0 indicates
that no MSB writes are necessary.
On the other hands reading anything other than 0 indicated the need to
write the MSB registers, so we set the respective flag.

The actual DMA mask stays at 32-bit for now. To help bisecting, a
separate patch will enable allocations from higher addresses.
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f735c40e
    • Andre Przywara's avatar
      net: axienet: Upgrade descriptors to hold 64-bit addresses · 4e958f33
      Andre Przywara authored 
      Newer revisions of the AXI DMA IP (>= v7.1) support 64-bit addresses,
both for the descriptors itself, as well as for the buffers they are
pointing to.
This is realised by adding "MSB" words for the next and phys pointer
right behind the existing address word, now named "LSB". These MSB words
live in formerly reserved areas of the descriptor.

If the hardware supports it, write both words when setting an address.
The buffer address is handled by two wrapper functions, the two
occasions where we set the next pointers are open coded.

For now this is guarded by a flag which we don't set yet.
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4e958f33
    • Andre Przywara's avatar
      net: axienet: Wrap DMA pointer writes to prepare for 64 bit · 6a00d0dd
      Andre Przywara authored 
      Newer versions of the Xilink DMA IP support busses with more than 32
address bits, by introducing an MSB word for the registers holding DMA
pointers (tail/current, RX/TX descriptor addresses).
On IP configured for more than 32 bits, it is also *required* to write
both words, to let the IP recognise this as a start condition for an
MM2S request, for instance.

Wrap the DMA pointer writes with a separate function, to add this
functionality later. For now we stick to the lower 32 bits.
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6a00d0dd
    • Andre Przywara's avatar
      net: axienet: Add mii-tool support · 2a9b65ea
      Andre Przywara authored 
      mii-tool is useful for debugging, and all it requires to work is to wire
up the ioctl ops function pointer.
Add this to the axienet driver to enable mii-tool.
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2a9b65ea
    • Andre Przywara's avatar
      net: axienet: Drop MDIO interrupt registers from ethtools dump · c30cb8f0
      Andre Przywara authored 
      Newer revisions of the IP don't have these registers. Since we don't
really use them, just drop them from the ethtools dump.
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c30cb8f0
    • Andre Przywara's avatar
      net: axienet: Mark eth_irq as optional · d6349e3e
      Andre Przywara authored 
      According to the DT binding, the Ethernet core interrupt is optional.

Use platform_get_irq_optional() to avoid the error message when the
IRQ is not specified.
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d6349e3e
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7