- 04 Apr, 2024 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-04-03 (ice, idpf) This series contains updates to ice and idpf drivers. Dan Carpenter initializes some pointer declarations to NULL as needed for resource cleanup on ice driver. Petr Oros corrects assignment of VLAN operators to fix Rx VLAN filtering in legacy mode for ice. Joshua calls eth_type_trans() on unknown packets to prevent possible kernel panic on idpf. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: idpf: fix kernel panic on unknown packet types ice: fix enabling RX VLAN filtering ice: Fix freeing uninitialized pointers ==================== Link: https://lore.kernel.org/r/20240403201929.1945116-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
syzbot found that tcf_skbmod_dump() was copying four bytes from kernel stack to user space [1]. The issue here is that 'struct tc_skbmod' has a four bytes hole. We need to clear the structure before filling fields. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 copy_to_iter include/linux/uio.h:196 [inline] simple_copy_to_iter net/core/datagram.c:532 [inline] __skb_datagram_iter+0x185/0x1000 net/core/datagram.c:420 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546 skb_copy_datagram_msg include/linux/skbuff.h:4050 [inline] netlink_recvmsg+0x432/0x1610 net/netlink/af_netlink.c:1962 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x2c4/0x340 net/socket.c:1068 __sys_recvfrom+0x35a/0x5f0 net/socket.c:2242 __do_sys_recvfrom net/socket.c:2260 [inline] __se_sys_recvfrom net/socket.c:2256 [inline] __x64_sys_recvfrom+0x126/0x1d0 net/socket.c:2256 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was stored to memory at: pskb_expand_head+0x30f/0x19d0 net/core/skbuff.c:2253 netlink_trim+0x2c2/0x330 net/netlink/af_netlink.c:1317 netlink_unicast+0x9f/0x1260 net/netlink/af_netlink.c:1351 nlmsg_unicast include/net/netlink.h:1144 [inline] nlmsg_notify+0x21d/0x2f0 net/netlink/af_netlink.c:2610 rtnetlink_send+0x73/0x90 net/core/rtnetlink.c:741 rtnetlink_maybe_send include/linux/rtnetlink.h:17 [inline] tcf_add_notify net/sched/act_api.c:2048 [inline] tcf_action_add net/sched/act_api.c:2071 [inline] tc_ctl_action+0x146e/0x19d0 net/sched/act_api.c:2119 rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2559 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6613 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xf4c/0x1260 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10df/0x11f0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was stored to memory at: __nla_put lib/nlattr.c:1041 [inline] nla_put+0x1c6/0x230 lib/nlattr.c:1099 tcf_skbmod_dump+0x23f/0xc20 net/sched/act_skbmod.c:256 tcf_action_dump_old net/sched/act_api.c:1191 [inline] tcf_action_dump_1+0x85e/0x970 net/sched/act_api.c:1227 tcf_action_dump+0x1fd/0x460 net/sched/act_api.c:1251 tca_get_fill+0x519/0x7a0 net/sched/act_api.c:1628 tcf_add_notify_msg net/sched/act_api.c:2023 [inline] tcf_add_notify net/sched/act_api.c:2042 [inline] tcf_action_add net/sched/act_api.c:2071 [inline] tc_ctl_action+0x1365/0x19d0 net/sched/act_api.c:2119 rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2559 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6613 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xf4c/0x1260 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10df/0x11f0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Local variable opt created at: tcf_skbmod_dump+0x9d/0xc20 net/sched/act_skbmod.c:244 tcf_action_dump_old net/sched/act_api.c:1191 [inline] tcf_action_dump_1+0x85e/0x970 net/sched/act_api.c:1227 Bytes 188-191 of 248 are uninitialized Memory access of size 248 starts at ffff888117697680 Data copied to user address 00007ffe56d855f0 Fixes: 86da71b5 ("net_sched: Introduce skbmod action") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20240403130908.93421-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jose Ignacio Tornos Martinez authored
After the commit d2689b6a ("net: usb: ax88179_178a: avoid two consecutive device resets"), reset is not executed from bind operation and mac address is not read from the device registers or the devicetree at that moment. Since the check to configure if the assigned mac address is random or not for the interface, happens after the bind operation from usbnet_probe, the interface keeps configured as random address, although the address is correctly read and set during open operation (the only reset now). In order to keep only one reset for the device and to avoid the interface always configured as random address, after reset, configure correctly the suitable field from the driver, if the mac address is read successfully from the device registers or the devicetree. Take into account if a locally administered address (random) was previously stored. cc: stable@vger.kernel.org # 6.6+ Fixes: d2689b6a ("net: usb: ax88179_178a: avoid two consecutive device resets") Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240403132158.344838-1-jtornosm@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Christophe JAILLET authored
The definition and declaration of sja1110_pcs_mdio_write_c45() don't have parameters in the same order. Knowing that sja1110_pcs_mdio_write_c45() is used as a function pointer in 'sja1105_info' structure with .pcs_mdio_write_c45, and that we have: int (*pcs_mdio_write_c45)(struct mii_bus *bus, int phy, int mmd, int reg, u16 val); it is likely that the definition is the one to change. Found with cppcheck, funcArgOrderDifferent. Fixes: ae271547 ("net: dsa: sja1105: C45 only transactions for PCS") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Michael Walle <mwalle@kernel.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/ff2a5af67361988b3581831f7bd1eddebfb4c48f.1712082763.git.christophe.jaillet@wanadoo.frSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Paul Barker authored
The error statistics should be updated each time the poll function is called, even if the full RX work budget has been consumed. This prevents the counts from becoming stuck when RX bandwidth usage is high. This also ensures that error counters are not updated after we've re-enabled interrupts as that could result in a race condition. Also drop an unnecessary space. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20240402145305.82148-2-paul.barker.ct@bp.renesas.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Paul Barker authored
The TX queue should be serviced each time the poll function is called, even if the full RX work budget has been consumed. This prevents starvation of the TX queue when RX bandwidth usage is high. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20240402145305.82148-1-paul.barker.ct@bp.renesas.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
This reverts commit 9ab4ad29. I went out of coffee and applied it to the wrong tree. Blame on me. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Nikita Kiryushin authored
As of now, tg3_power_down_prepare always ends with success, but the error handling code from former tg3_set_power_state call is still here. This code became unreachable in commit c866b7ea ("tg3: Do not use legacy PCI power management"). Remove (now unreachable) error handling code for simplification and change tg3_power_down_prepare to a void function as its result is no more checked. Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240401191418.361747-1-kiryushin@ancud.ruSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Haiyang Zhang authored
mana_get_rxbuf_cfg() aligns the RX buffer's DMA datasize to be multiple of 64. So a packet slightly bigger than mtu+14, say 1536, can be received and cause skb_over_panic. Sample dmesg: [ 5325.237162] skbuff: skb_over_panic: text:ffffffffc043277a len:1536 put:1536 head:ff1100018b517000 data:ff1100018b517100 tail:0x700 end:0x6ea dev:<NULL> [ 5325.243689] ------------[ cut here ]------------ [ 5325.245748] kernel BUG at net/core/skbuff.c:192! [ 5325.247838] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 5325.258374] RIP: 0010:skb_panic+0x4f/0x60 [ 5325.302941] Call Trace: [ 5325.304389] <IRQ> [ 5325.315794] ? skb_panic+0x4f/0x60 [ 5325.317457] ? asm_exc_invalid_op+0x1f/0x30 [ 5325.319490] ? skb_panic+0x4f/0x60 [ 5325.321161] skb_put+0x4e/0x50 [ 5325.322670] mana_poll+0x6fa/0xb50 [mana] [ 5325.324578] __napi_poll+0x33/0x1e0 [ 5325.326328] net_rx_action+0x12e/0x280 As discussed internally, this alignment is not necessary. To fix this bug, remove it from the code. So oversized packets will be marked as CQE_RX_TRUNCATED by NIC, and dropped. Cc: stable@vger.kernel.org Fixes: 2fbbd712 ("net: mana: Enable RX path to handle various MTU sizes") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/1712087316-20886-1-git-send-email-haiyangz@microsoft.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
qdisc_tree_reduce_backlog() is called with the qdisc lock held, not RTNL. We must use qdisc_lookup_rcu() instead of qdisc_lookup() syzbot reported: WARNING: suspicious RCU usage 6.1.74-syzkaller #0 Not tainted ----------------------------- net/sched/sch_api.c:305 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by udevd/1142: #0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:306 [inline] #0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:747 [inline] #0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: net_tx_action+0x64a/0x970 net/core/dev.c:5282 #1: ffff888171861108 (&sch->q.lock){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:350 [inline] #1: ffff888171861108 (&sch->q.lock){+.-.}-{2:2}, at: net_tx_action+0x754/0x970 net/core/dev.c:5297 #2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:306 [inline] #2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:747 [inline] #2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: qdisc_tree_reduce_backlog+0x84/0x580 net/sched/sch_api.c:792 stack backtrace: CPU: 1 PID: 1142 Comm: udevd Not tainted 6.1.74-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call Trace: <TASK> [<ffffffff85b85f14>] __dump_stack lib/dump_stack.c:88 [inline] [<ffffffff85b85f14>] dump_stack_lvl+0x1b1/0x28f lib/dump_stack.c:106 [<ffffffff85b86007>] dump_stack+0x15/0x1e lib/dump_stack.c:113 [<ffffffff81802299>] lockdep_rcu_suspicious+0x1b9/0x260 kernel/locking/lockdep.c:6592 [<ffffffff84f0054c>] qdisc_lookup+0xac/0x6f0 net/sched/sch_api.c:305 [<ffffffff84f037c3>] qdisc_tree_reduce_backlog+0x243/0x580 net/sched/sch_api.c:811 [<ffffffff84f5b78c>] pfifo_tail_enqueue+0x32c/0x4b0 net/sched/sch_fifo.c:51 [<ffffffff84fbcf63>] qdisc_enqueue include/net/sch_generic.h:833 [inline] [<ffffffff84fbcf63>] netem_dequeue+0xeb3/0x15d0 net/sched/sch_netem.c:723 [<ffffffff84eecab9>] dequeue_skb net/sched/sch_generic.c:292 [inline] [<ffffffff84eecab9>] qdisc_restart net/sched/sch_generic.c:397 [inline] [<ffffffff84eecab9>] __qdisc_run+0x249/0x1e60 net/sched/sch_generic.c:415 [<ffffffff84d7aa96>] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125 [<ffffffff84d85d29>] net_tx_action+0x7c9/0x970 net/core/dev.c:5313 [<ffffffff85e002bd>] __do_softirq+0x2bd/0x9bd kernel/softirq.c:616 [<ffffffff81568bca>] invoke_softirq kernel/softirq.c:447 [inline] [<ffffffff81568bca>] __irq_exit_rcu+0xca/0x230 kernel/softirq.c:700 [<ffffffff81568ae9>] irq_exit_rcu+0x9/0x20 kernel/softirq.c:712 [<ffffffff85b89f52>] sysvec_apic_timer_interrupt+0x42/0x90 arch/x86/kernel/apic/apic.c:1107 [<ffffffff85c00ccb>] asm_sysvec_apic_timer_interrupt+0x1b/0x20 arch/x86/include/asm/idtentry.h:656 Fixes: d636fc5d ("net: sched: add rcu annotations around qdisc->qdisc_sleeping") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20240402134133.2352776-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Horatiu Vultur authored
There are 2 issues with the blamed commit. 1. When the phy is initialized, it would enable the disabled of UDPv4 checksums. The UDPv6 checksum is already enabled by default. So when 1-step is configured then it would clear these flags. 2. After the 1-step is configured, then if 2-step is configured then the 1-step would be still configured because it is not clearing the flag. So the sync frames will still have origin timestamps set. Fix this by reading first the value of the register and then just change bit 12 as this one determines if the timestamp needs to be inserted in the frame, without changing any other bits. Fixes: ece19502 ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Divya Koppera <divya.koppera@microchip.com> Link: https://lore.kernel.org/r/20240402071634.2483524-1-horatiu.vultur@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Piotr Wejman authored
The driver should ensure that same priority is not mapped to multiple rx queues. From DesignWare Cores Ethernet Quality-of-Service Databook, section 17.1.29 MAC_RxQ_Ctrl2: "[...]The software must ensure that the content of this field is mutually exclusive to the PSRQ fields for other queues, that is, the same priority is not mapped to multiple Rx queues[...]" Previously rx_queue_priority() function was: - clearing all priorities from a queue - adding new priorities to that queue After this patch it will: - first assign new priorities to a queue - then remove those priorities from all other queues - keep other priorities previously assigned to that queue Fixes: a8f5102a ("net: stmmac: TX and RX queue priority configuration") Fixes: 2142754f ("net: stmmac: Add MAC related callbacks for XGMAC2") Signed-off-by: Piotr Wejman <piotrwejman90@gmail.com> Link: https://lore.kernel.org/r/20240401192239.33942-1-piotrwejman90@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Duanqiang Wen authored
txgbe clkdev shortened clk_name, so i2c_dev info_name also need to shorten. Otherwise, i2c_dev cannot initialize clock. Fixes: e30cef00 ("net: txgbe: fix clk_name exceed MAX_DEV_ID limits") Signed-off-by: Duanqiang Wen <duanqiangwen@net-swift.com> Link: https://lore.kernel.org/r/20240402021843.126192-1-duanqiangwen@net-swift.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
John Ernberg says: ==================== net: fec: Fix to suspend / resume with mac_managed_pm Since the introduction of mac_managed_pm in the FEC driver there were some discrepancies regarding power management of the PHY. This failed on our board that has a permanently powered Microchip LAN8700R attached to the FEC. Although the root cause of the failure can be traced back to f166f890 ("net: ethernet: fec: Replace interrupt driven MDIO with polled IO") and probably even before that, we only started noticing the problem going from 5.10 to 6.1. Since 557d5dc8 ("net: fec: use mac-managed PHY PM") is actually a fix to most of the power management sequencing problems that came with power managing the MDIO bus which for the FEC meant adding a race with FEC resume (and phy_start() if netif was running) and PHY resume. That it worked before for us was probably just luck... Thanks to Wei's response to my report at [1] I was able to pick up his patch and start honing in on the remaining missing details. [1]: https://lore.kernel.org/netdev/1f45bdbe-eab1-4e59-8f24-add177590d27@actia.se/ v3: https://lore.kernel.org/netdev/20240306133734.4144808-1-john.ernberg@actia.se/ v2: https://lore.kernel.org/netdev/20240229105256.2903095-1-john.ernberg@actia.se/ v1: https://lore.kernel.org/netdev/20240212105010.2258421-1-john.ernberg@actia.se/ ==================== Link: https://lore.kernel.org/r/20240328155909.59613-1-john.ernberg@actia.seSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Wei Fang authored
Setting mac_managed_pm during interface up is too late. In situations where the link is not brought up yet and the system suspends the regular PHY power management will run. Since the FEC ETHEREN control bit is cleared (automatically) on suspend the controller is off in resume. When the regular PHY power management resume path runs in this context it will write to the MII_DATA register but nothing will be transmitted on the MDIO bus. This can be observed by the following log: fec 5b040000.ethernet eth0: MDIO read timeout Microchip LAN87xx T1 5b040000.ethernet-1:04: PM: dpm_run_callback(): mdio_bus_phy_resume+0x0/0xc8 returns -110 Microchip LAN87xx T1 5b040000.ethernet-1:04: PM: failed to resume: error -110 The data written will however remain in the MII_DATA register. When the link later is set to administrative up it will trigger a call to fec_restart() which will restore the MII_SPEED register. This triggers the quirk explained in f166f890 ("net: ethernet: fec: Replace interrupt driven MDIO with polled IO") causing an extra MII_EVENT. This extra event desynchronizes all the MDIO register reads, causing them to complete too early. Leading all reads to read as 0 because fec_enet_mdio_wait() returns too early. When a Microchip LAN8700R PHY is connected to the FEC, the 0 reads causes the PHY to be initialized incorrectly and the PHY will not transmit any ethernet signal in this state. It cannot be brought out of this state without a power cycle of the PHY. Fixes: 557d5dc8 ("net: fec: use mac-managed PHY PM") Closes: https://lore.kernel.org/netdev/1f45bdbe-eab1-4e59-8f24-add177590d27@actia.se/Signed-off-by: Wei Fang <wei.fang@nxp.com> [jernberg: commit message] Signed-off-by: John Ernberg <john.ernberg@actia.se> Link: https://lore.kernel.org/r/20240328155909.59613-2-john.ernberg@actia.seSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 03 Apr, 2024 10 commits
-
-
Joshua Hay authored
In the very rare case where a packet type is unknown to the driver, idpf_rx_process_skb_fields would return early without calling eth_type_trans to set the skb protocol / the network layer handler. This is especially problematic if tcpdump is running when such a packet is received, i.e. it would cause a kernel panic. Instead, call eth_type_trans for every single packet, even when the packet type is unknown. Fixes: 3a8845af ("idpf: add RX splitq napi poll support") Reported-by: Balazs Nemeth <bnemeth@redhat.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Salvatore Daniele <sdaniele@redhat.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Petr Oros authored
ice_port_vlan_on/off() was introduced in commit 2946204b ("ice: implement bridge port vlan"). But ice_port_vlan_on() incorrectly assigns ena_rx_filtering to inner_vlan_ops in DVM mode. This causes an error when rx_filtering cannot be enabled in legacy mode. Reproducer: echo 1 > /sys/class/net/$PF/device/sriov_numvfs ip link set $PF vf 0 spoofchk off trust on vlan 3 dmesg: ice 0000:41:00.0: failed to enable Rx VLAN filtering for VF 0 VSI 9 during VF rebuild, error -95 Fixes: 2946204b ("ice: implement bridge port vlan") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Dan Carpenter authored
Automatically cleaned up pointers need to be initialized before exiting their scope. In this case, they need to be initialized to NULL before any return statement. Fixes: 90f821d7 ("ice: avoid unnecessary devm_ usage") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Phil Elwell authored
If the RBUF logic is not reset when the kernel starts then there may be some data left over from any network boot loader. If the 64-byte packet headers are enabled then this can be fatal. Extend bcmgenet_dma_disable to do perform the reset, but not when called from bcmgenet_resume in order to preserve a wake packet. N.B. This different handling of resume is just based on a hunch - why else wouldn't one reset the RBUF as well as the TBUF? If this isn't the case then it's easy to change the patch to make the RBUF reset unconditional. See: https://github.com/raspberrypi/linux/issues/3850 See: https://github.com/raspberrypi/firmware/issues/1882Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Maarten Vanraes <maarten@rmail.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aleksandr Mishin authored
In rvu_map_cgx_lmac_pf() the 'iter', which is used as an array index, can reach value (up to 14) that exceed the size (MAX_LMAC_COUNT = 8) of the array. Fix this bug by adding 'iter' value check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 91c6945e ("octeontx2-af: cn10k: Add RPM MAC support") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tariq Toukan authored
Add myself as mlx5 core and EN maintainer. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Acked-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20240401184347.53884-1-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Kuniyuki Iwashima authored
syzkaller reported infinite recursive calls of fib6_dump_done() during netlink socket destruction. [1] From the log, syzkaller sent an AF_UNSPEC RTM_GETROUTE message, and then the response was generated. The following recvmmsg() resumed the dump for IPv6, but the first call of inet6_dump_fib() failed at kzalloc() due to the fault injection. [0] 12:01:34 executing program 3: r0 = socket$nl_route(0x10, 0x3, 0x0) sendmsg$nl_route(r0, ... snip ...) recvmmsg(r0, ... snip ...) (fail_nth: 8) Here, fib6_dump_done() was set to nlk_sk(sk)->cb.done, and the next call of inet6_dump_fib() set it to nlk_sk(sk)->cb.args[3]. syzkaller stopped receiving the response halfway through, and finally netlink_sock_destruct() called nlk_sk(sk)->cb.done(). fib6_dump_done() calls fib6_dump_end() and nlk_sk(sk)->cb.done() if it is still not NULL. fib6_dump_end() rewrites nlk_sk(sk)->cb.done() by nlk_sk(sk)->cb.args[3], but it has the same function, not NULL, calling itself recursively and hitting the stack guard page. To avoid the issue, let's set the destructor after kzalloc(). [0]: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 1 PID: 432110 Comm: syz-executor.3 Not tainted 6.8.0-12821-g537c2e91-dirty #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153) should_failslab (mm/slub.c:3733) kmalloc_trace (mm/slub.c:3748 mm/slub.c:3827 mm/slub.c:3992) inet6_dump_fib (./include/linux/slab.h:628 ./include/linux/slab.h:749 net/ipv6/ip6_fib.c:662) rtnl_dump_all (net/core/rtnetlink.c:4029) netlink_dump (net/netlink/af_netlink.c:2269) netlink_recvmsg (net/netlink/af_netlink.c:1988) ____sys_recvmsg (net/socket.c:1046 net/socket.c:2801) ___sys_recvmsg (net/socket.c:2846) do_recvmmsg (net/socket.c:2943) __x64_sys_recvmmsg (net/socket.c:3041 net/socket.c:3034 net/socket.c:3034) [1]: BUG: TASK stack guard page was hit at 00000000f2fa9af1 (stack is 00000000b7912430..000000009a436beb) stack guard page: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 223719 Comm: kworker/1:3 Not tainted 6.8.0-12821-g537c2e91-dirty #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: events netlink_sock_destruct_work RIP: 0010:fib6_dump_done (net/ipv6/ip6_fib.c:570) Code: 3c 24 e8 f3 e9 51 fd e9 28 fd ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 41 57 41 56 41 55 41 54 55 48 89 fd <53> 48 8d 5d 60 e8 b6 4d 07 fd 48 89 da 48 b8 00 00 00 00 00 fc ff RSP: 0018:ffffc9000d980000 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffffffff84405990 RCX: ffffffff844059d3 RDX: ffff8881028e0000 RSI: ffffffff84405ac2 RDI: ffff88810c02f358 RBP: ffff88810c02f358 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000224 R12: 0000000000000000 R13: ffff888007c82c78 R14: ffff888007c82c68 R15: ffff888007c82c68 FS: 0000000000000000(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000d97fff8 CR3: 0000000102309002 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <#DF> </#DF> <TASK> fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) ... fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) netlink_sock_destruct (net/netlink/af_netlink.c:401) __sk_destruct (net/core/sock.c:2177 (discriminator 2)) sk_destruct (net/core/sock.c:2224) __sk_free (net/core/sock.c:2235) sk_free (net/core/sock.c:2246) process_one_work (kernel/workqueue.c:3259) worker_thread (kernel/workqueue.c:3329 kernel/workqueue.c:3416) kthread (kernel/kthread.c:388) ret_from_fork (arch/x86/kernel/process.c:153) ret_from_fork_asm (arch/x86/entry/entry_64.S:256) Modules linked in: Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240401211003.25274-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Heiner Kallweit authored
On some boards with this chip version the BIOS is buggy and misses to reset the PHY page selector. This results in the PHY ID read accessing registers on a different page, returning a more or less random value. Fix this by resetting the page selector first. Fixes: f1e911d5 ("r8169: add basic phylib support") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/64f2055e-98b8-45ec-8568-665e3d54d4e6@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Marco Pinna authored
Commit 82dfb540 ("VSOCK: Add virtio vsock vsockmon hooks") added virtio_transport_deliver_tap_pkt() for handing packets to the vsockmon device. However, in virtio_transport_send_pkt_work(), the function is called before actually sending the packet (i.e. before placing it in the virtqueue with virtqueue_add_sgs() and checking whether it returned successfully). Queuing the packet in the virtqueue can fail even multiple times. However, in virtio_transport_deliver_tap_pkt() we deliver the packet to the monitoring tap interface only the first time we call it. This certainly avoids seeing the same packet replicated multiple times in the monitoring interface, but it can show the packet sent with the wrong timestamp or even before we succeed to queue it in the virtqueue. Move virtio_transport_deliver_tap_pkt() after calling virtqueue_add_sgs() and making sure it returned successfully. Fixes: 82dfb540 ("VSOCK: Add virtio vsock vsockmon hooks") Cc: stable@vge.kernel.org Signed-off-by: Marco Pinna <marco.pinn95@gmail.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20240329161259.411751-1-marco.pinn95@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Duoming Zhou authored
When the ax25 device is detaching, the ax25_dev_device_down() calls ax25_ds_del_timer() to cleanup the slave_timer. When the timer handler is running, the ax25_ds_del_timer() that calls del_timer() in it will return directly. As a result, the use-after-free bugs could happen, one of the scenarios is shown below: (Thread 1) | (Thread 2) | ax25_ds_timeout() ax25_dev_device_down() | ax25_ds_del_timer() | del_timer() | ax25_dev_put() //FREE | | ax25_dev-> //USE In order to mitigate bugs, when the device is detaching, use timer_shutdown_sync() to stop the timer. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240329015023.9223-1-duoming@zju.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 02 Apr, 2024 7 commits
-
-
Ivan Vecera authored
Commit 73d9629e ("i40e: Do not allow untrusted VF to remove administratively set MAC") fixed an issue where untrusted VF was allowed to remove its own MAC address although this was assigned administratively from PF. Unfortunately the introduced check is wrong because it causes that MAC filters for other MAC addresses including multi-cast ones are not removed. <snip> if (ether_addr_equal(addr, vf->default_lan_addr.addr) && i40e_can_vf_change_mac(vf)) was_unimac_deleted = true; else continue; if (i40e_del_mac_filter(vsi, al->list[i].addr)) { ... </snip> The else path with `continue` effectively skips any MAC filter removal except one for primary MAC addr when VF is allowed to do so. Fix the check condition so the `continue` is only done for primary MAC address. Fixes: 73d9629e ("i40e: Do not allow untrusted VF to remove administratively set MAC") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240329180638.211412-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: fix fallback MIB counter and wrong var in selftests Here are two fixes related to MPTCP. The first patch fixes when the MPTcpExtMPCapableFallbackACK MIB counter is modified: it should only be incremented when a connection was using MPTCP options, but then a fallback to TCP has been done. This patch also checks the counter is not incremented by mistake during the connect selftests. This counter was wrongly incremented since its introduction in v5.7. The second patch fixes a wrong parsing of the 'dev' endpoint options in the selftests: the wrong variable was used. This option was not used before, but it is going to be soon. This issue is visible since v5.18. ==================== Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-0-324a8981da48@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Geliang Tang authored
There's a bug in pm_nl_check_endpoint(), 'dev' didn't be parsed correctly. If calling it in the 2nd test of endpoint_tests() too, it fails with an error like this: creation [FAIL] expected '10.0.2.2 id 2 subflow dev dev' \ found '10.0.2.2 id 2 subflow dev ns2eth2' The reason is '$2' should be set to 'dev', not '$1'. This patch fixes it. Fixes: 69c6ce7b ("selftests: mptcp: add implicit endpoint test case") Cc: stable@vger.kernel.org Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-2-324a8981da48@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Davide Caratti authored
Current MPTCP servers increment MPTcpExtMPCapableFallbackACK when they accept non-MPC connections. As reported by Christoph, this is "surprising" because the counter might become greater than MPTcpExtMPCapableSYNRX. MPTcpExtMPCapableFallbackACK counter's name suggests it should only be incremented when a connection was seen using MPTCP options, then a fallback to TCP has been done. Let's do that by incrementing it when the subflow context of an inbound MPC connection attempt is dropped. Also, update mptcp_connect.sh kselftest, to ensure that the above MIB does not increment in case a pure TCP client connects to a MPTCP server. Fixes: fc518953 ("mptcp: add and use MIB counter infrastructure") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/449Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-1-324a8981da48@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
Alexei reported the following splat: WARNING: CPU: 32 PID: 3276 at net/mptcp/subflow.c:1430 subflow_data_ready+0x147/0x1c0 Modules linked in: dummy bpf_testmod(O) [last unloaded: bpf_test_no_cfi(O)] CPU: 32 PID: 3276 Comm: test_progs Tainted: GO 6.8.0-12873-g2c43c33bfd23 Call Trace: <TASK> mptcp_set_rcvlowat+0x79/0x1d0 sk_setsockopt+0x6c0/0x1540 __bpf_setsockopt+0x6f/0x90 bpf_sock_ops_setsockopt+0x3c/0x90 bpf_prog_509ce5db2c7f9981_bpf_test_sockopt_int+0xb4/0x11b bpf_prog_dce07e362d941d2b_bpf_test_socket_sockopt+0x12b/0x132 bpf_prog_348c9b5faaf10092_skops_sockopt+0x954/0xe86 __cgroup_bpf_run_filter_sock_ops+0xbc/0x250 tcp_connect+0x879/0x1160 tcp_v6_connect+0x50c/0x870 mptcp_connect+0x129/0x280 __inet_stream_connect+0xce/0x370 inet_stream_connect+0x36/0x50 bpf_trampoline_6442491565+0x49/0xef inet_stream_connect+0x5/0x50 __sys_connect+0x63/0x90 __x64_sys_connect+0x14/0x20 The root cause of the issue is that bpf allows accessing mptcp-level proto_ops from a tcp subflow scope. Fix the issue detecting the problematic call and preventing any action. Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/482 Fixes: 5684ab1a ("mptcp: give rcvlowat some love") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/d8cb7d8476d66cb0812a6e29cd1e626869d9d53e.1711738080.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
The netdev CI runs in a VM and captures serial, so stdout and stderr get combined. Because there's a missing new line in stderr the test ends up corrupting KTAP: # Successok 1 selftests: net: reuseaddr_conflict which should have been: # Success ok 1 selftests: net: reuseaddr_conflict Fixes: 422d8dc6 ("selftest: add a reuseaddr test") Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://lore.kernel.org/r/20240329160559.249476-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Aleksandr Mishin authored
In lan8814_get_sig_rx() and lan8814_get_sig_tx() ptp_parse_header() may return NULL as ptp_header due to abnormal packet type or corrupted packet. Fix this bug by adding ptp_header check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: ece19502 ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240329061631.33199-1-amishin@t-argos.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 29 Mar, 2024 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Bluetooth: Fix TOCTOU in HCI debugfs implementation - Bluetooth: hci_event: set the conn encrypted before conn establishes - Bluetooth: qca: fix device-address endianness - Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync * tag 'for-net-2024-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: Fix TOCTOU in HCI debugfs implementation Bluetooth: hci_event: set the conn encrypted before conn establishes Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync Bluetooth: qca: fix device-address endianness Bluetooth: add quirk for broken address properties arm64: dts: qcom: sc7180-trogdor: mark bluetooth address as broken dt-bindings: bluetooth: add 'qcom,local-bd-address-broken' Revert "Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT" ==================== Link: https://lore.kernel.org/r/20240329140453.2016486-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Kuniyuki Iwashima says: ==================== tcp: Fix bind() regression and more tests. bhash2 has not been well tested for IPV6_V6ONLY option. This series fixes two regression around IPV6_V6ONLY, one of which has been there since bhash2 introduction, and another is introduced by a recent change. Also, this series adds as many tests as possible to catch regression easily. The baseline is 28044fc1~ which is pre-bhash2 commit. Tested on 28044fc1~: # PASSED: 132 / 132 tests passed. # Totals: pass:132 fail:0 xfail:0 xpass:0 skip:0 error:0 net.git: # FAILED: 125 / 132 tests passed. # Totals: pass:125 fail:7 xfail:0 xpass:0 skip:0 error:0 With this series: # PASSED: 132 / 132 tests passed. # Totals: pass:132 fail:0 xfail:0 xpass:0 skip:0 error:0 v1: https://lore.kernel.org/netdev/20240325181923.48769-1-kuniyu@amazon.com/ ==================== Link: https://lore.kernel.org/r/20240326204251.51301-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Kuniyuki Iwashima authored
This patch adds two tests using SO_REUSEADDR and SO_REUSEPORT and defines errno for each test case. SO_REUSEADDR/SO_REUSEPORT is set for the per-fixture two bind() calls. The notable pattern is the pair of v6only [::] and plain [::]. The two sockets are put into the same tb2, where per-bucket v6only flag would be useless to detect bind() conflict. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240326204251.51301-9-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Kuniyuki Iwashima authored
bhash2 was not well tested for IPv6-only sockets. This patch adds test cases where we set IPV6_V6ONLY for per-fixture bind() calls if variant->ipv6_only[i] is true. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240326204251.51301-8-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Kuniyuki Iwashima authored
In addtition to the two addresses defined in the fixtures, this patch add 6 more bind calls(): * 0.0.0.0 * 127.0.0.1 * :: * ::1 * ::ffff:0.0.0.0 * ::ffff:127.0.0.1 The first two per-fixture bind() calls control how inet_bind2_bucket is created, and the rest 6 bind() calls cover as many conflicting patterns as possible. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240326204251.51301-7-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Kuniyuki Iwashima authored
We don't have bind() conflict tests for the same protocol pairs. Let's add them except for the same address pair, which will be covered by the following patch adding 6 more bind() calls for each test case. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240326204251.51301-6-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Kuniyuki Iwashima authored
Currently, bind_wildcard.c calls bind() twice for two addresses and checks the pre-defined errno against the 2nd call. Also, the two bind() calls are swapped to cover various patterns how bind buckets are created. However, only testing two addresses is insufficient to detect regression. So, we will add more bind() calls, and then, we need to define different errno for each bind() per test case. As a prepartion, let's define the reverse order bind() test cases as fixtures. No functional changes are intended. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240326204251.51301-5-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Kuniyuki Iwashima authored
Currently, bind_wildcard.c tests only (IPv4, IPv6) pairs, but we will add more tests for the same protocol pairs. This patch makes it possible by changing the address pointer to void. No functional changes are intended. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240326204251.51301-4-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-