- 01 Feb, 2017 6 commits
-
-
Maarten Lankhorst authored
We may keep the crtc's enabled when userspace unsets all framebuffers but keeps the crtc active. This exposes a WARN in fbc_global disable, and a lot of bugs in our hardware readout code. Solve this by disabling all crtc's for now. Changes since v1: - Use lock_all_ctx instead of lock_all. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481812185-19098-4-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
Primarily this serves as a sanity check that the bit has been cleared before we suspend (and hasn't reappeared after resume). Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Tvrtko Ursulin <tursulin@ursulin.net> Link: http://patchwork.freedesktop.org/patch/msgid/20170201131222.11882-1-chris@chris-wilson.co.ukReviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com>
-
Chris Wilson authored
As we now flag when the GPU signals a context-switch and do not read the status register before we see that signal, we do not have to ensure that it is cleared upon reset (and can leave it to the GPU to reset it from the power context). Signed-off-by:
-
Uma Shankar authored
Enable MIPI IO WA for BXT DSI as per bspec and program the DSI regulators. v2: Moved IO enable to pre-enable as per Mika's review comments. Also reused the existing register definition for BXT_P_CR_GT_DISP_PWRON. v3: Added Programming the DSI regulators as per disable/enable sequences. v4: Restricting regulator changes to BXT as suggested by Jani/Mika v5: Removed redundant read/modify for regulator register as per Jani's comment. Maintain enable/disable symmetry as per spec. Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
Vidya Srinivas <vidya.srinivas@intel.com> Acked-by:
Mika Kahola <mika.kahola@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Chris Wilson authored
On a non-llc system, the objects are created with .cache_level = CACHE_NONE and so the transition to uncached for scanout is a no-op. However, if the object was never written to, it will still be in the CPU domain (having been zeroed out by shmemfs). Those cachelines need to be flushed prior to display. Reported-and-tested-by: Vito Caputo Fixes: a6a7cc4b ("drm/i915: Always flush the dirty CPU cache when pinning the scanout") Signed-off-by:
-
Daniel Vetter authored
Chris Wilson wants the new fence tracepoint added in commit 8c96c678 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Jan 24 11:57:58 2017 +0000 dma/fence: Export enable-signaling tracepoint for emission by drivers Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
- 31 Jan, 2017 18 commits
-
-
Dave Airlie authored
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next adding runtime PM support to MIC driver, and including some cleanups - especially using atomic helper functions instead of specific ones - and fixups. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: g2d: prevent integer overflow in drm/exynos: fix a timeout loop drm/exynos: use atomic helper commit drm/exynos: remove unnecessary codes drm/exynos: mic: Add runtime PM support drm/exynos: Stop using drm_framebuffer_unregister_private drm/exynos: mic: Fix parse_dt function drm/exynos: mic: Add mode_set callback function
-
Dave Airlie authored
Merge tag 'sunxi-drm-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next Allwinner DRM changes for 4.11 Just one minor fix. * tag 'sunxi-drm-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: drm/sun4i: Fix a return value in case of error
-
git://people.freedesktop.org/~syeh/repos_linuxDave Airlie authored
This is to address what we've discussed, moving some of the minor changes into a drm-next request. * 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux: drm/vmwgfx: Use kmemdup instead of kmalloc and memcpy drm/vmwgfx: Fix depth input into drm_mode_legacy_fb_format drm/vmwgfx: Fix a potential integer overflow drm/vmwgfx: Clear an uninitialized struct member drm/vmwgfx: Annotate ignored return values drm/vmwgfx: Clear uninitialized fields of a parameter
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
This is the main feature pull for radeon and amdgpu for 4.11. Highlights: - Power and clockgating improvements - Preliminary SR-IOV support - ttm buffer priority support - ttm eviction fixes - Removal of the ttm lru callbacks - Remove SI DPM quirks due to MC firmware issues - Handle VFCT with multiple vbioses - Powerplay improvements - Lots of driver cleanups * 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux: (120 commits) drm/amdgpu: fix amdgpu_bo_va_mapping flags drm/amdgpu: access stolen VRAM directly on CZ (v2) drm/amdgpu: access stolen VRAM directly on KV/KB (v2) drm/amdgpu: fix kernel panic when dpm disabled on Kv. drm/amdgpu: fix dpm bug on Kv. drm/amd/powerplay: fix regresstion issue can't set manual dpm mode. drm/amdgpu: handle vfct with multiple vbios images drm/radeon: handle vfct with multiple vbios images drm/amdgpu: move misc si headers into amdgpu drm/amdgpu: remove unused header si_reg.h drm/radeon: drop pitcairn dpm quirks drm/amdgpu: drop pitcairn dpm quirks drm: radeon: radeon_ttm: Handle return NULL error from ioremap_nocache drm/amd/amdgpu/amdgpu_ttm: Handle return NULL error from ioremap_nocache drm/amdgpu: add new virtual display ID drm/amd/amdgpu: remove the uncessary parameter for ib scheduler drm/amdgpu: Bring bo creation in line with radeon driver (v2) drm/amd/powerplay: fix misspelling in header guard drm/ttm: revert "add optional LRU removal callback v2" drm/ttm: revert "implement LRU add callbacks v2" ...
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
Another round of -misc stuff: - Noralf debugfs cleanup cleanup (not yet everything, some more driver patches awaiting acks). - More doc work. - edid/infoframe fixes from Ville. - misc 1-patch fixes all over, as usual Noralf needs this for his tinydrm pull request. * tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits) drm/vc4: Remove vc4_debugfs_cleanup() dma/fence: Export enable-signaling tracepoint for emission by drivers drm/tilcdc: Remove tilcdc_debugfs_cleanup() drm/tegra: Remove tegra_debugfs_cleanup() drm/sti: Remove drm_debugfs_remove_files() calls drm/radeon: Remove drm_debugfs_remove_files() call drm/omap: Remove omap_debugfs_cleanup() drm/hdlcd: Remove hdlcd_debugfs_cleanup() drm/etnaviv: Remove etnaviv_debugfs_cleanup() drm/etnaviv: allow build with COMPILE_TEST drm/amd/amdgpu: Remove drm_debugfs_remove_files() call drm/prime: Clarify DMA-BUF/GEM Object lifetime drm/ttm: Make sure BOs being swapped out are cacheable drm/atomic: Remove drm_atomic_debugfs_cleanup() drm: drm_minor_register(): Clean up debugfs on failure drm: debugfs: Remove all files automatically on cleanup drm/fourcc: add vivante tiled layout format modifiers drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F drm/edid: Set AVI infoframe Q even when QS=0 drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range() ...
-
Dave Airlie authored
Merge tag 'drm/atmel-hlcdc/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bbrezillon/linux into drm-next Contains a single patch to create the fbdev at driver's registration time instead of waiting for the connector status change. * tag 'drm/atmel-hlcdc/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bbrezillon/linux: drm/atmel-hlcdc: Rework the fbdev creation logic
-
Dave Airlie authored
Merge tag 'zxdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into drm-next ZTE DRM driver updates for 4.11: - Add missing selection of VIDEOMODE_HELPERS in Kconfig, since ZTE DRM driver uses drm_display_mode_to_videomode(). - Enable HDMI audio support through SPDIF interface based on generic hdmi-audio-codec driver. - Enable VOU VL (Video Layer) to support overlay plane with scaling function. - Refine zx_vou driver a bit and then add TV Encoder output device support. [airlied: fixup plane format change] * tag 'zxdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: drm: zte: add tvenc driver support dt: add bindings for ZTE tvenc device drm: zte: add function to configure vou_ctrl dividers drm: zte: move struct vou_inf into zx_vou driver drm: zte: add interlace mode support drm: zte: add overlay plane support drm: zte: add .atomic_disable hook to disable graphic layer drm: zte: make zx_plane accessible from zx_vou driver drm: zte: support hdmi audio through spdif drm: zte: select VIDEOMODE_HELPERS in Kconfig
-
git://anongit.freedesktop.org/git/drm-intelDave Airlie authored
Updated pull request after I pulled first time :) * 'drm-intel-next' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Pevent copying uninitialised garbage into vma->ggtt_view
-
git://linux-arm.org/linux-ldDave Airlie authored
Hope I'm not too late before the cutoff for the v4.11 with these patches. Mostly an asorted set of fixes that we have discovered while playing with the code and preparing for the next set of features. * 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld: drm: mali-dp: fix stride setting for multi-plane formats drm: mali-dp: Add plane offset to the plane's physical start address register drm: mali-dp: Check for sufficient address space drm: mali-dp: Check hw version matches device-tree drm: mali-dp: Rename malidp_input_format to malidp_pixel_format drm: mali-dp: fix Lx_CONTROL register fields clobber drm: mali-dp: Fix transposed horizontal/vertical flip drm: mali-dp: Fix destination size handling when rotating drm: mali-dp: Don't force source size == crtc size drm: mali-dp: Check more use cases in the plane's ->atomic_check() drm: malidp: Remove event_list member from struct malidp_drm drm/arm/malidp: Fix possible dereference of NULL
-
Chris Wilson authored
Just do a quick check that the stolen memory address range doesn't overflow our chosen integer type. v2: Add add_overflows() to utils with the promise that gcc7 can do this better than C and then maybe it will have a proper definition in core. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
The conversion of stolen to use phys_addr_t (from essentially u32) sparked an interesting discussion. We treat stolen memory as only accessible from the GPU (the DMA device) - an attempt to use it from the CPU will generate a MCE on gen6 onwards, although it is in theory a physical address that can be dereferenced from the CPU as demonstrated by earlier generations. As such, using phys_addr_t has the wrong connotations and as we pass the address into the DMA device via dma_addr_t (through the scatterlists used to program the GTT entries), we should treat it as dma_addr_t throughout. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com>
-
Chris Wilson authored
If we abort the i915_gem_internal get_pages, we mark the failing sg as the last. However, that means we iterate upto and including the failing sg element and results in us trying to free the unallocated sg_page(). Signed-off-by:
Matthew Auld <matthew.auld@intel.com>
-
Weinan Li authored
Having converted the force_wake_get/_put routines for a vGPU to be no-op, we can use the common mmio accessors and remove our specialised routines that simply skipped the calls to control force_wake. Signed-off-by:
Weinan Li <weinan.z.li@intel.com> Reviewed-by:
-
Weinan Li authored
For a virtualized GPU, the host maintains the forcewake state on the real device. As we don't control forcewake ourselves, we can simply set force_wake_get() and force_wake_put() to be no-ops. By setting the vfuncs, we adjust both the manual control of forcewake and around the mmio accessors (making our vgpu specific mmio routines redundant and to be removed in the next patch). Signed-off-by:
-
Chris Wilson authored
Include extra information such as the user_handle and hw_id so that userspace can identify which of their contexts hung, useful if they are performing self-diagnositics. Signed-off-by:
-
Chris Wilson authored
Extend intel_detect_preproduction_hw() to include BXT A and B steppings. Signed-off-by:
-
Chris Wilson authored
Preproduction sdv are not supported beyond the release of production hardware, and continued use is ill-advised. Mark the kernel as tainted to reinforce the error. Signed-off-by:
-
Chris Wilson authored
As we add new generations, we should keep detecting new pre-production system development platforms that were temporarily enabled to facilitate initial development and now superseded by production systems. To make it easier to add more platforms, split the if into a series of logical operations. v2: s/sdv/pre/ - not all system development vehicles are for preproduction usage. Signed-off-by:
-
- 30 Jan, 2017 16 commits
-
-
Joonyoung Shim authored
The size computations done in the ioctl function use an integer. If userspace submits a request with req->cmd_nr or req->cmd_buf_nr set to INT_MAX, the integer computations overflow later, leading to potential (kernel) memory corruption. Prevent this issue by enforcing a limit on the number of submitted commands, so that we have enough headroom later for the size computations. Note that this change has no impact on the currently available users in userspace, like e.g. libdrm/exynos. While at it, also make a comment about the size computation more detailed. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Dan Carpenter authored
We were trying to print an error message if we timed out here, but the loop actually ends with "tries" set to UINT_MAX and not zero. Fix this by changing from tries-- to --tries. A for loop would actually be the most natural way to do this. My fix means we only loop 99 times instead of 100 but that's probably ok. Fixes: a696394c ('drm/exynos: mixer: simplify loop in vp_win_reset()') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Inki Dae authored
This patch replaces specific atomic commit function with atomic helper commit one. For this, it removes existing atomic commit function and relevant code specific to Exynos DRM and makes atomic helper commit to be used instead. Below are changes for the use of atomic helper commit: - add atomic_commit_tail callback specific to Exynos DRM . default implemention of atomic helper doesn't mesh well with runtime PM so the device driver which supports runtime PM should call drm_atomic_helper_commit_modeset_enables function prior to drm_atomic_helper_commit_planes function call. atomic_commit_tail callback implements this call ordering. - allow plane commit only in case that CRTC device is enabled. . for this, it calls atomic_helper_commit_planes function with DRM_PLANE_COMMIT_ACTIVE_ONLY flag in atomic_commit_tail callback. Signed-off-by:Gustavo Padovan <gustavo.padovan@collabora.com>
-
Inki Dae authored
This patch removes exynos_drm_crtc_cancel_page_flip call when drm is closed because at that time, events will be released by drm_events_release function. Changelog v1: - remove exynos_drm_crtc_cancel_page_flip function also because this funtion isn't used anymore. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com>
-
Marek Szyprowski authored
This patch adds runtime support calls to notify device core when MIC device is really in use. Runtime PM is implemented by enabling and disabling clocks like in other Exynos DRM subdrivers. Adding runtime PM support is needed to let power domain with this device to be turned off when display is not used. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Daniel Vetter authored
This is the deprecated function for when you embedded the framebuffer somewhere else (which breaks refcounting). But exynos is using drm_framebuffer_remove and a free-standing fb, so this is rendundant. Signed-off-by:
-
Hoegeun Kwon authored
The OF graph is not necessary because the panel is a child of dsi. therefore, the parse_dt function of dsi does not need to check the remote_node connected to the panel. and the whole parse_dt function should be refactored later. Signed-off-by:
Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by:
-
Hoegeun Kwon authored
Before applying the patch, used the of_get_videomode function to parse the display-timings in the panel which is the child driver of dsi in the devicetree. this is wrong. So removed the of_get_videomode and fixed to get videomode struct through mode_set callback function. Signed-off-by:
-
Jani Nikula authored
This allows the use of more than 3 ports/pipes/whatever without tricks, even if the register offsets are not evenly spaced. There's the risk of out of bounds access if we're not careful; currently that would "just" lead to the wrong register offset being used. It might be possible to add build bug ons for build time constant indexing. We already have ports defined up to E, not sure if we might have bugs related to them and the current _PORT3() macro. text data bss dec hex filename 1239868 46199 4096 1290163 13afb3 drivers/gpu/drm/i915/i915.ko 1238828 46199 4096 1289123 13aba3 drivers/gpu/drm/i915/i915.ko Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Tvrtko Ursulin <tursulin@ursulin.net> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Mika Kuoppala authored
Move the invariant parts of context desc setup from execlist init to context creation. This is advantageous when we need to create different templates based on the context parametrization, ie. for svm capable contexts. v2: s/create/default, remove engine->ctx_desc_template Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Boris Brezillon authored
Now that we wait for DRM panels to be available before registering the DRM device (returning -EPROBE_DEFER if the panel has not been probed yet), we no longer need to put the fbdev creation code in ->output_poll_changed(). This removes the 10 secs delay between DRM dev registration and fbdev creation (polling period = 10 seconds). Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by:
Alex Vazquez <avazquez.dev@gmail.com>
-
Noralf Trønnes authored
drm_debugfs_cleanup() now removes all minor->debugfs_list entries automatically, so the drm_driver.debugfs_cleanup callback is not needed. Cc: eric@anholt.net Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Ander Conselvan de Oliveira authored
The gamma tables in Geminilake were changed. There is no split-gamma mode. Instead, there is a dedicated degamma table that is enabled whenever pipe CSC is enabled. The dedicated gamma table has 16 bit precision but doesn't support separate channels. Since that doesn't match the per-channel format of the degamma LUT property, for now only a linear table is loaded and the property ignored. v2: Remove empty line. (Ville) Reuse broadwell code. (Ville) v3: Don't write PIPE_CSC_MODE. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
-
Ander Conselvan de Oliveira authored
Split the logic for progamming each LUT out of broadwell_load_luts(), so we can reuse part of it for geminilake. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Ander Conselvan de Oliveira authored
In Geminilake, the bits for enabling pipe csc, pipe gamma and plane gamma moved to a new register. So update the plane update functions to set the right bits. Pipe CSC is kept disabled though, since enabling that also enables the dedicated degamma table, and that is not properly programmed yet, leading to a black screen. v2: Use plane_id. (Ville) Remove unnecessary variable. (Ville) Keep registers in offset order. (Ville) Don't set plane gamma disable twice. (Ander) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: -
Ander Conselvan de Oliveira authored
The plane gamma tables are never programmed, so just disable it, like it is done for the primary plane. Signed-off-by:
-
