- 22 Feb, 2013 4 commits
-
-
Thierry Reding authored
The modes are only used from within drm_edid.c so we move them there to avoid creating duplicates by multiple inclusion of drm_edid_modes.h. As a side-effect we can also get rid of a few variables that keep track of the number of entries in the tables and use ARRAY_SIZE() instead. Signed-off-by:
Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com>
-
Thierry Reding authored
The same function had already been merged with a different name. Remove the duplicate one but reuse some of its kerneldoc fragments for the existing implementation. Signed-off-by:
-
Dave Airlie authored
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next The summary: . Add display mode check operaion to mixer driver - Mixer IP also can put certain restrictions on the proposed display modes and these restrictions need to be considered during mode negotiation, which happens immediately after edid parsing. . Set correct mode for range of resolutions - With this patch, the mixer driver could find the correct mode for the range of resolutions upto 1080 vertical lines. . Support extra resolution for hdmi - This patch programs the core and timing generator registers using the timing data provided in drm_display_mode without hard-coded configurations. So this patch adds additional PHY configs to allow us to support more permissible resolutions and refresh rates. . Add device tree support for g2d - This patch adds just the compatible string for exynos5250 SoC so that with device tree enabling, this driver can be probed. . And bug fixes and code cleanups. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: Add device tree based discovery support for G2D drm/exynos: hdmi: support extra resolutions using drm_display_mode timings drm/exynos: mixer: set correct mode for range of resolutions drm/exynos: implement display-mode-check callback in mixer driver drm/exynos: add display-mode-check operation to exynos_mixer_ops struct drm/exynos: release resources properly when fb creation is failed. drm/exynos: fix wrong pointer access at vm close. drm/exynos: Add missing braces around sizeof drm/exynos: consider exception case to fb handle creation drm/exynos: fix iommu address allocation order
-
Patrik Jakobsson authored
The values of n, m1 and m2 needs to be subtracted by 2 before writing them to the FP register. The dot clock calculation already thinks of these values in register form so we must also specify them as such. Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- 21 Feb, 2013 10 commits
-
-
Ajay Kumar authored
This patch adds device tree match table for Exynos G2D controller. Signed-off-by:
Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Sean Paul authored
This patch programs the core and timing generator registers using the timing data provided in drm_display_mode and not using hard-coded configurations. Additional PHY configs has been added. This allows us to support more permissible resolutions and refresh rates. Signed-off-by:
Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Shirish S <s.shirish@samsung.com> Signed-off-by:
Akshay Saraswat <Akshay.s@samsung.com> Signed-off-by:
-
Rahul Sharma authored
With this patch, mixer driver find the correct resolution mode for the range of resolutions, upto 1080 vertical lines. Resolution will be categorized to NTSC SD, PAL SD or HD and the correct mode is set to the mixer configuration register. Signed-off-by:
-
Rahul Sharma authored
This patch adds the implementation of check_timing callback in the mixer driver. Based on the mixer version, correct set of restrictions will be exposed by the mixer driver. A resolution will be acceptable only if passes the criteria set by mixer and hdmi IPs. Signed-off-by:
-
Rahul Sharma authored
This patch adds the display mode check operation to exynos_mixer_ops in drm-common-hdmi. In Exynos SoCs, mixer IP can put certain restrictions on the proposed display modes. These restriction needs to be considered during mode negotiation, which happens immediately after edid parsing. Both, mixer check-mode and hdmi check-timing callbacks are called one after another and ANDed result is returned back. Signed-off-by:
-
YoungJun Cho authored
This patch releases allocated resources properly when exynos_user_fb_create() is failed. Signed-off-by:
YoungJun Cho <yj44.cho@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com>
-
YoungJun Cho authored
This patch fixes wrong pointer access issue to filp->f_op and filp->private_data. The exynos_drm_gem_mmap_ioctl() changes filp->f_op and filp->private_data temporarily and restore them to use original ones in exynos_drm_gem_mmap_buffer() but there was no lock between the changing and the restoring so wrong pointer access to filp->f_op and filp->private_data was induced by vm close callback. So this patch uses mutex lock properly to resolve this issue. Signed-off-by:
-
Sachin Kamat authored
Fixes the following checkpatch warning: WARNING: sizeof *sgt should be sizeof(*sgt) Signed-off-by:
-
Inki Dae authored
GETFB ioctl request creates a new handle to only one gem object so it should check if the given fb has one gem object. Signed-off-by:
-
Inki Dae authored
This patch modifies iommu address allocation order from 64k to 4k. 64k order causes waste of the io space and this was our mistakes. Signed-off-by:
-
- 20 Feb, 2013 26 commits
-
-
git://people.freedesktop.org/~robclark/linuxDave Airlie authored
KMS driver for TI LCD controller * 'tilcdc-next' of git://people.freedesktop.org/~robclark/linux: drm/tilcdc: add support for LCD panels (v5) drm/tilcdc: add encoder slave (v2) drm/i2c: nxp-tda998x (v3) drm/tilcdc: add TI LCD Controller DRM driver (v4) drm/nouveau: use i2c encoder helper wrappers drm: i2c encoder helper wrappers drm/cma: add debugfs helpers drm: small fix in drm_send_vblank_event() drm: Don't set the plane->fb to NULL on successfull set_plane drm/cma-helper: fixup compilation Conflicts: drivers/gpu/drm/Kconfig drivers/gpu/drm/Makefile drivers/gpu/drm/drm_fb_cma_helper.c
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
More drm-next bits for radeon. Just bug fixes. * 'drm-next-3.9' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: properly validate the atpx interface drm/radeon: switch get_gpu_clock() to a callback (v2) drm/radeon: add a asic callback to get the xclk drm/radeon: Avoid NULL pointer dereference from atom_index_iio() allocation failure drm/radeon: remove overzealous warning in hdmi handling drm/radeon: fix multi-head power profile stability on BTC+ asics
-
Dave Airlie authored
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next restore debugfs vbios, fix multiple actions with supervisor intrs * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: restore debugfs/vbios.rom support drm/nv50-/kms: remove UPDATE methods after each encoder disconnect drm/nvd0/disp: handle multiple actions from one set of supervisor intrs drm/nv50/disp: handle multiple actions from one set of supervisor intrs
-
Alex Deucher authored
Some bioses don't set the function mask correctly which caused required functions to be disabled. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=53111Signed-off-by:
-
Alex Deucher authored
Cleans up the code for future asics v2: rebase, fix some missing radeon_asic updates Signed-off-by: -
Alex Deucher authored
This is required to get the reference clock used by the gfx engine for things like timestamps. Fixes support for GL extensions the use timestamps on certain boards. Signed-off-by: -
Tim Gardner authored
Smatch anlysis: drivers/gpu/drm/radeon/atom.c:1242 atom_index_iio() error: potential null dereference 'ctx->iio'. (kzalloc returns null) Also cleaned up some checks before calls to kfree(). kfree(NULL) is OK. Cc: David Airlie <airlied@linux.ie> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Michel Dänzer" <michel.daenzer@amd.com> Cc: Dave Airlie <airlied@redhat.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
-
Alex Deucher authored
hdmi audio works fine. The warning just confuses users. fixes: https://bugzilla.kernel.org/show_bug.cgi?id=44341Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
vddci needs to track mclk for multi-head. Signed-off-by: -
Marcin Slusarz authored
Signed-off-by:Marcin Slusarz <marcin.slusarz@gmail.com>
-
Ben Skeggs authored
Supervisor can now handle more than one operation within a single series of interrupts. Signed-off-by:Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Lee, Chun-Yi authored
In v3.3, the gma500 drm driver moved from staging to drm group by Alan Cox's 3abcf41f patch. the gma500 drm driver should control brightness well and don't need gma500 stub driver anymore. Reference: http://lists.freedesktop.org/archives/dri-devel/2012-May/023426.html http://lists.freedesktop.org/archives/dri-devel/2012-May/023467.htmlAcked-by:
Matthew Garrett <mjg59@srcf.ucam.org> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Lee, Chun-Yi <jlee@suse.com> Signed-off-by:
-
Dave Airlie authored
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next Nothing terribly exciting in here probably: - reworked thermal stuff from mupuf/I, has a chance of possibly working well enough when we get to being able to reclock.. - driver will report mmio access faults on chipsets where it's supported - will now sleep waiting on fences on nv84+ rather than polling - some cleanup of the internal fencing, looking towards sli/dmabuf sync - initial support for anx9805 dp/tmds encoder - nv50+ display fixes related to the above, and also might fix a few other issues - nicer error reporting (will log process names with channel errors) - various other random fixes * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (87 commits) nouveau: ACPI support depends on X86 and X86_PLATFORM_DEVICES drm/nouveau/i2c: add support for ddc/aux, and dp link training on anx9805 drm/nv50: initial kms support for off-chip TMDS/DP encoders drm/nv50-/disp: initial supervisor support for off-chip encoders drm/nv50-/disp: initial work towards supporting external encoders drm/nv50-/kms: remove unnecessary wait-for-completion points drm/nv50-/disp: move DP link training to core and train from supervisor drm/nv50-/disp: handle supervisor tasks from workqueue drm/nouveau/i2c: create proper chipset-specific class implementations drm/nv50-/disp: 0x0000 is a valid udisp config value drm/nv50/devinit: reverse the logic for running encoder init scripts drm/nouveau/bios: store a type/mask hash in parsed dcb data drm/nouveau/i2c: extend type to 16-bits, add lookup-by-type function drm/nouveau/i2c: aux channels not necessarily on nvio drm/nouveau/i2c: fix a bit of a thinko in nv_wri2cr helper functions drm/nouveau/bios: parse external transmitter type if off-chip drm/nouveau: store i2c port pointer directly in nouveau_encoder drm/nouveau/i2c: handle i2c/aux mux outside of port lookup function drm/nv50/graph: avoid touching 400724, it doesn't exist drm/nouveau: Fix DPMS 1 on G4 Snowball, from snow white to coal black. ...
-
Ben Hutchings authored
If I build nouveau on ia64, Kconfig warns: warning: (DRM_NOUVEAU) selects ACPI_WMI which has unmet direct dependencies (X86 && X86_PLATFORM_DEVICES && ACPI) warning: (DRM_NOUVEAU) selects MXM_WMI which has unmet direct dependencies (X86 && X86_PLATFORM_DEVICES && ACPI_WMI) Make all the ACPI support depend on X86 and select X86_PLATFORM_DEVICES. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
DP link training is now handled as part of the supervisor processing, and can no longer race with it. Signed-off-by: -
Ben Skeggs authored
We need to be able to do link training for PIOR-connected ANX9805 from the third supervisor handler (due to script ordering in the bios, can't have the "user" call train because some settings are overwritten from the modesetting bios scripts). This moves link training for SOR-connected DP encoders to the second supervisor interrupt, *before* we call the modesetting scripts (yes, different ordering from PIOR is necessary). This is useful since we should now be able to remove some hacks to workaround races between the supervisor and link training paths. Signed-off-by: -
Ben Skeggs authored
i2c_algo_bit sleeps... Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Return an out-of-range value instead to signal a failure from exec_clkcmp(). Signed-off-by: -
Ben Skeggs authored
A single U encoder table can match multiple DCB entries, whereas the reverse is not true and can lead to us not matching a DCB entry at all, and fail to initialise some encoders. Signed-off-by:
-
