- 30 Jul, 2018 14 commits
-
-
Jaganath Kanakkassery authored
This basically sets the random address for the adv instance Random address can be set only if the instance is created which is done in Set ext adv param. Random address and rpa expire timer and flags have been added to adv instance which will be used when the respective instance is scheduled. This introduces a hci_get_random_address() which returns the own address type and random address (rpa or nrpa) based on the instance flags and hdev flags. New function is required since own address type should be known before setting adv params but address can be set only after setting params. < HCI Command: LE Set Advertising Set Random Address (0x08|0x0035) plen 7 Advertising handle: 0x00 Advertising random address: 3C:8E:56:9B:77:84 (OUI 3C-8E-56) > HCI Event: Command Complete (0x0e) plen 4 LE Set Advertising Set Random Address (0x08|0x0035) ncmd 1 Status: Success (0x00) Signed-off-by:Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Jaganath Kanakkassery authored
This patch does extended advertising for directed advertising if the controller supportes. Instance 0 is used for directed advertising. Signed-off-by:
-
Jaganath Kanakkassery authored
If ext adv is enabled then use ext adv to disable as well. Also remove the adv set during LE disable. < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 2 Extended advertising: Disabled (0x00) Number of sets: Disable all sets (0x00) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: -
Jaganath Kanakkassery authored
This patch implements Set Ext Adv data and Set Ext Scan rsp data if controller support extended advertising. Currently the operation is set as Complete data and fragment preference is set as no fragment < HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 35 Handle: 0x00 Operation: Complete extended advertising data (0x03) Fragment preference: Minimize fragmentation (0x01) Data length: 0x15 16-bit Service UUIDs (complete): 2 entries Heart Rate (0x180d) Battery Service (0x180f) Name (complete): Test LE Company: Google (224) Data: 0102 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Data (0x08|0x0037) ncmd 1 Status: Success (0x00) Signed-off-by: -
Jaganath Kanakkassery authored
This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: -
Jaganath Kanakkassery authored
This patch reads the number of advertising sets in the controller during init and save it in hdev. Signed-off-by:
-
Jaganath Kanakkassery authored
Use the selected PHYs by Set PHY Configuration management command in extended create connection. Signed-off-by:
-
Jaganath Kanakkassery authored
This patch defines the extended ADV types and handle it in ADV report. Signed-off-by:
-
Jaganath Kanakkassery authored
Use the PHYs selected in Set Phy Configuration management command while scanning. < HCI Command: LE Set Extended Scan Parameters (0x08|0x0041) plen 13 Own address type: Random (0x01) Filter policy: Accept all advertisement (0x00) PHYs: 0x05 Entry 0: LE 1M Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) Entry 1: LE Coded Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Scan Enable (0x08|0x0042) plen 6 Extended scan: Enabled (0x01) Filter duplicates: Enabled (0x01) Duration: 0 msec (0x0000) Period: 0.00 sec (0x0000) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 2 Status: Success (0x00) Signed-off-by: -
Jaganath Kanakkassery authored
This defines and implement phy changed event and send it to user whenever selected PHYs changes using SET_PHY_CONFIGURATION. This will be also trigerred when BREDR pkt_type is changed using the legacy ioctl HCISETPTYPE. @ MGMT Command: Set PHY Configuration (0x0045) plen 4 Selected PHYs: 0x7fff BR 1M 1SLOT BR 1M 3SLOT BR 1M 5SLOT EDR 2M 1SLOT EDR 2M 3SLOT EDR 2M 5SLOT EDR 3M 1SLOT EDR 3M 3SLOT EDR 3M 5SLOT LE 1M TX LE 1M RX LE 2M TX LE 2M RX LE CODED TX LE CODED RX < HCI Command: LE Set Default PHY (0x08|0x0031) plen 3 All PHYs preference: 0x00 TX PHYs preference: 0x07 LE 1M LE 2M LE Coded RX PHYs preference: 0x07 LE 1M LE 2M LE Coded > HCI Event: Command Complete (0x0e) plen 4 LE Set Default PHY (0x08|0x0031) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 3 Set PHY Configuration (0x0045) plen 0 Status: Success (0x00) @ MGMT Event: PHY Configuration Changed (0x0026) plen 4 Selected PHYs: 0x7fff BR 1M 1SLOT BR 1M 3SLOT BR 1M 5SLOT EDR 2M 1SLOT EDR 2M 3SLOT EDR 2M 5SLOT EDR 3M 1SLOT EDR 3M 3SLOT EDR 3M 5SLOT LE 1M TX LE 1M RX LE 2M TX LE 2M RX LE CODED TX LE CODED RX Signed-off-by:
-
Jaganath Kanakkassery authored
This enables user to set phys which will be used in all subsequent connections. Also host will use the same in LE scanning as well. @ MGMT Command: Set PHY Configuration (0x0045) plen 4 Selected PHYs: 0x7fff BR 1M 1SLOT BR 1M 3SLOT BR 1M 5SLOT EDR 2M 1SLOT EDR 2M 3SLOT EDR 2M 5SLOT EDR 3M 1SLOT EDR 3M 3SLOT EDR 3M 5SLOT LE 1M TX LE 1M RX LE 2M TX LE 2M RX LE CODED TX LE CODED RX < HCI Command: LE Set Default PHY (0x08|0x0031) plen 3 All PHYs preference: 0x00 TX PHYs preference: 0x07 LE 1M LE 2M LE Coded RX PHYs preference: 0x07 LE 1M LE 2M LE Coded > HCI Event: Command Complete (0x0e) plen 4 LE Set Default PHY (0x08|0x0031) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 3 Set PHY Configuration (0x0045) plen 0 Status: Success (0x00) @ MGMT Event: PHY Configuration Changed (0x0026) plen 4 Selected PHYs: 0x7fff BR 1M 1SLOT BR 1M 3SLOT BR 1M 5SLOT EDR 2M 1SLOT EDR 2M 3SLOT EDR 2M 5SLOT EDR 3M 1SLOT EDR 3M 3SLOT EDR 3M 5SLOT LE 1M TX LE 1M RX LE 2M TX LE 2M RX LE CODED TX LE CODED RX Signed-off-by: -
Jaganath Kanakkassery authored
This commands basically retrieve the supported packet types of BREDR and supported PHYs of the controller. BR_1M_1SLOT, LE_1M_TX and LE_1M_RX would be supported by default. Other PHYs are supported based on the local features. Also this sets PHY_CONFIGURATION bit in supported settings. @ MGMT Command: Get PHY Configuration (0x0044) plen 0 @ MGMT Event: Command Complete (0x0001) plen 15 Get PHY Configuration (0x0044) plen 12 Status: Success (0x00) Supported PHYs: 0x7fff BR 1M 1SLOT BR 1M 3SLOT BR 1M 5SLOT EDR 2M 1SLOT EDR 2M 3SLOT EDR 2M 5SLOT EDR 3M 1SLOT EDR 3M 3SLOT EDR 3M 5SLOT LE 1M TX LE 1M RX LE 2M TX LE 2M RX LE CODED TX LE CODED RX Configurable PHYs: 0x79fe BR 1M 3SLOT BR 1M 5SLOT EDR 2M 1SLOT EDR 2M 3SLOT EDR 2M 5SLOT EDR 3M 1SLOT EDR 3M 3SLOT EDR 3M 5SLOT LE 2M TX LE 2M RX LE CODED TX LE CODED RX Selected PHYs: 0x07ff BR 1M 1SLOT BR 1M 3SLOT BR 1M 5SLOT EDR 2M 1SLOT EDR 2M 3SLOT EDR 2M 5SLOT EDR 3M 1SLOT EDR 3M 3SLOT EDR 3M 5SLOT LE 1M TX LE 1M RX Signed-off-by: -
Jaganath Kanakkassery authored
This also add macros for checking LMP support for different pkt_types Signed-off-by:
-
Jaganath Kanakkassery authored
1M is mandatory to be supported by LE controllers and the same would be set in power on. This patch defines hdev flags for LE PHYs and set 1M to default. Signed-off-by:
-
- 23 Jul, 2018 7 commits
-
-
Jia-Ju Bai authored
qca_open() and qca_set_baudrate() are never called in atomic context. They call kzalloc() and bt_skb_alloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. I also manually check the kernel code before reporting it. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Jia-Ju Bai authored
inject_cmd_complete() is only called by intel_dequeue(), which is never called in atomic context. inject_cmd_complete() calls bt_skb_alloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. I also manually check the kernel code before reporting it. Signed-off-by:
-
Jia-Ju Bai authored
inject_cmd_complete() is only called by btusb_send_frame_intel(), which is set to hdev->send, and hdev->send() is never called in atomic context. inject_cmd_complete() calls bt_skb_alloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. I also manually check the kernel code before reporting it. Signed-off-by:
-
Jia-Ju Bai authored
btmrvl_sdio_card_to_host() is never called in atomic context. It calls bt_skb_alloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. I also manually check the kernel code before reporting it. Signed-off-by:
-
Jia-Ju Bai authored
bpa10x_send_frame() is only set to hdev->send, and hdev->send() is never called in atomic context. bpa10x_send_frame() calls usb_alloc_urb(), kmalloc() and usb_submit_urb() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. I also manually check the kernel code before reporting it. Signed-off-by:
-
Jia-Ju Bai authored
bluecard_hci_set_baud_rate() is never called in atomic context. bluecard_hci_set_baud_rate() is only by bluecard_hci_open(), which is set to hdev->open, and hdev->open() is never called in atomic context. bluecard_hci_set_baud_rate() calls bt_skb_alloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. I also manually check the kernel code before reporting it. Signed-off-by:
-
Jia-Ju Bai authored
bfusb_send_frame() is only set to hdev->send, and hdev->send() is never called in atomic context. bfusb_send_frame() calls bt_skb_alloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. I also manually check the kernel code before reporting it. Signed-off-by:
-
- 18 Jul, 2018 1 commit
-
-
Philipp Puschmann authored
Fixes this warning that was provoked by a pairing: [60258.016221] WARNING: possible recursive locking detected [60258.021558] 4.15.0-RD1812-BSP #1 Tainted: G O [60258.027146] -------------------------------------------- [60258.032464] kworker/u5:0/70 is trying to acquire lock: [60258.037609] (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<87759073>] bt_accept_enqueue+0x3c/0x74 [60258.046863] [60258.046863] but task is already holding lock: [60258.052704] (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<d22d7106>] l2cap_sock_new_connection_cb+0x1c/0x88 [60258.062905] [60258.062905] other info that might help us debug this: [60258.069441] Possible unsafe locking scenario: [60258.069441] [60258.075368] CPU0 [60258.077821] ---- [60258.080272] lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); [60258.085510] lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); [60258.090748] [60258.090748] *** DEADLOCK *** [60258.090748] [60258.096676] May be due to missing lock nesting notation [60258.096676] [60258.103472] 5 locks held by kworker/u5:0/70: [60258.107747] #0: ((wq_completion)%shdev->name#2){+.+.}, at: [<9460d092>] process_one_work+0x130/0x4fc [60258.117263] #1: ((work_completion)(&hdev->rx_work)){+.+.}, at: [<9460d092>] process_one_work+0x130/0x4fc [60258.126942] #2: (&conn->chan_lock){+.+.}, at: [<7877c8c3>] l2cap_connect+0x80/0x4f8 [60258.134806] #3: (&chan->lock/2){+.+.}, at: [<2e16c724>] l2cap_connect+0x8c/0x4f8 [60258.142410] #4: (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<d22d7106>] l2cap_sock_new_connection_cb+0x1c/0x88 [60258.153043] [60258.153043] stack backtrace: [60258.157413] CPU: 1 PID: 70 Comm: kworker/u5:0 Tainted: G O 4.15.0-RD1812-BSP #1 [60258.165945] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [60258.172485] Workqueue: hci0 hci_rx_work [60258.176331] Backtrace: [60258.178797] [<8010c9fc>] (dump_backtrace) from [<8010ccbc>] (show_stack+0x18/0x1c) [60258.186379] r7:80e55fe4 r6:80e55fe4 r5:20050093 r4:00000000 [60258.192058] [<8010cca4>] (show_stack) from [<809864e8>] (dump_stack+0xb0/0xdc) [60258.199301] [<80986438>] (dump_stack) from [<8016ecc8>] (__lock_acquire+0xffc/0x11d4) [60258.207144] r9:5e2bb019 r8:630f974c r7:ba8a5940 r6:ba8a5ed8 r5:815b5220 r4:80fa081c [60258.214901] [<8016dccc>] (__lock_acquire) from [<8016f620>] (lock_acquire+0x78/0x98) [60258.222655] r10:00000040 r9:00000040 r8:808729f0 r7:00000001 r6:00000000 r5:60050013 [60258.230491] r4:00000000 [60258.233045] [<8016f5a8>] (lock_acquire) from [<806ee974>] (lock_sock_nested+0x64/0x88) [60258.240970] r7:00000000 r6:b796e870 r5:00000001 r4:b796e800 [60258.246643] [<806ee910>] (lock_sock_nested) from [<808729f0>] (bt_accept_enqueue+0x3c/0x74) [60258.255004] r8:00000001 r7:ba7d3c00 r6:ba7d3ea4 r5:ba7d2000 r4:b796e800 [60258.261717] [<808729b4>] (bt_accept_enqueue) from [<808aa39c>] (l2cap_sock_new_connection_cb+0x68/0x88) [60258.271117] r5:b796e800 r4:ba7d2000 [60258.274708] [<808aa334>] (l2cap_sock_new_connection_cb) from [<808a294c>] (l2cap_connect+0x190/0x4f8) [60258.283933] r5:00000001 r4:ba6dce00 [60258.287524] [<808a27bc>] (l2cap_connect) from [<808a4a14>] (l2cap_recv_frame+0x744/0x2cf8) [60258.295800] r10:ba6dcf24 r9:00000004 r8:b78d8014 r7:00000004 r6:bb05d000 r5:00000004 [60258.303635] r4:bb05d008 [60258.306183] [<808a42d0>] (l2cap_recv_frame) from [<808a7808>] (l2cap_recv_acldata+0x210/0x214) [60258.314805] r10:b78e7800 r9:bb05d960 r8:00000001 r7:bb05d000 r6:0000000c r5:b7957a80 [60258.322641] r4:ba6dce00 [60258.325188] [<808a75f8>] (l2cap_recv_acldata) from [<8087630c>] (hci_rx_work+0x35c/0x4e8) [60258.333374] r6:80e5743c r5:bb05d7c8 r4:b7957a80 [60258.338004] [<80875fb0>] (hci_rx_work) from [<8013dc7c>] (process_one_work+0x1a4/0x4fc) [60258.346018] r10:00000001 r9:00000000 r8:baabfef8 r7:ba997500 r6:baaba800 r5:baaa5d00 [60258.353853] r4:bb05d7c8 [60258.356401] [<8013dad8>] (process_one_work) from [<8013e028>] (worker_thread+0x54/0x5cc) [60258.364503] r10:baabe038 r9:baaba834 r8:80e05900 r7:00000088 r6:baaa5d18 r5:baaba800 [60258.372338] r4:baaa5d00 [60258.374888] [<8013dfd4>] (worker_thread) from [<801448f8>] (kthread+0x134/0x160) [60258.382295] r10:ba8310b8 r9:bb07dbfc r8:8013dfd4 r7:baaa5d00 r6:00000000 r5:baaa8ac0 [60258.390130] r4:ba831080 [60258.392682] [<801447c4>] (kthread) from [<801080b4>] (ret_from_fork+0x14/0x20) [60258.399915] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801447c4 [60258.407751] r4:baaa8ac0 r3:baabe000 Signed-off-by:Philipp Puschmann <pp@emlix.com> Signed-off-by:
-
- 16 Jul, 2018 1 commit
-
-
Sudip Mukherjee authored
slub debug reported: [ 440.648642] ============================================================================= [ 440.648649] BUG kmalloc-1024 (Tainted: G BU O ): Poison overwritten [ 440.648651] ----------------------------------------------------------------------------- [ 440.648655] INFO: 0xe70f4bec-0xe70f4bec. First byte 0x6a instead of 0x6b [ 440.648665] INFO: Allocated in sk_prot_alloc+0x6b/0xc6 age=33155 cpu=1 pid=1047 [ 440.648671] ___slab_alloc.constprop.24+0x1fc/0x292 [ 440.648675] __slab_alloc.isra.18.constprop.23+0x1c/0x25 [ 440.648677] __kmalloc+0xb6/0x17f [ 440.648680] sk_prot_alloc+0x6b/0xc6 [ 440.648683] sk_alloc+0x1e/0xa1 [ 440.648700] sco_sock_alloc.constprop.6+0x26/0xaf [bluetooth] [ 440.648716] sco_connect_cfm+0x166/0x281 [bluetooth] [ 440.648731] hci_conn_request_evt.isra.53+0x258/0x281 [bluetooth] [ 440.648746] hci_event_packet+0x28b/0x2326 [bluetooth] [ 440.648759] hci_rx_work+0x161/0x291 [bluetooth] [ 440.648764] process_one_work+0x163/0x2b2 [ 440.648767] worker_thread+0x1a9/0x25c [ 440.648770] kthread+0xf8/0xfd [ 440.648774] ret_from_fork+0x2e/0x38 [ 440.648779] INFO: Freed in __sk_destruct+0xd3/0xdf age=3815 cpu=1 pid=1047 [ 440.648782] __slab_free+0x4b/0x27a [ 440.648784] kfree+0x12e/0x155 [ 440.648787] __sk_destruct+0xd3/0xdf [ 440.648790] sk_destruct+0x27/0x29 [ 440.648793] __sk_free+0x75/0x91 [ 440.648795] sk_free+0x1c/0x1e [ 440.648810] sco_sock_kill+0x5a/0x5f [bluetooth] [ 440.648825] sco_conn_del+0x8e/0xba [bluetooth] [ 440.648840] sco_disconn_cfm+0x3a/0x41 [bluetooth] [ 440.648855] hci_event_packet+0x45e/0x2326 [bluetooth] [ 440.648868] hci_rx_work+0x161/0x291 [bluetooth] [ 440.648872] process_one_work+0x163/0x2b2 [ 440.648875] worker_thread+0x1a9/0x25c [ 440.648877] kthread+0xf8/0xfd [ 440.648880] ret_from_fork+0x2e/0x38 [ 440.648884] INFO: Slab 0xf4718580 objects=27 used=27 fp=0x (null) flags=0x40008100 [ 440.648886] INFO: Object 0xe70f4b88 @offset=19336 fp=0xe70f54f8 When KASAN was enabled, it reported: [ 210.096613] ================================================================== [ 210.096634] BUG: KASAN: use-after-free in ex_handler_refcount+0x5b/0x127 [ 210.096641] Write of size 4 at addr ffff880107e17160 by task kworker/u9:1/2040 [ 210.096651] CPU: 1 PID: 2040 Comm: kworker/u9:1 Tainted: G U O 4.14.47-20180606+ #2 [ 210.096654] Hardware name: , BIOS 2017.01-00087-g43e04de 08/30/2017 [ 210.096693] Workqueue: hci0 hci_rx_work [bluetooth] [ 210.096698] Call Trace: [ 210.096711] dump_stack+0x46/0x59 [ 210.096722] print_address_description+0x6b/0x23b [ 210.096729] ? ex_handler_refcount+0x5b/0x127 [ 210.096736] kasan_report+0x220/0x246 [ 210.096744] ex_handler_refcount+0x5b/0x127 [ 210.096751] ? ex_handler_clear_fs+0x85/0x85 [ 210.096757] fixup_exception+0x8c/0x96 [ 210.096766] do_trap+0x66/0x2c1 [ 210.096773] do_error_trap+0x152/0x180 [ 210.096781] ? fixup_bug+0x78/0x78 [ 210.096817] ? hci_debugfs_create_conn+0x244/0x26a [bluetooth] [ 210.096824] ? __schedule+0x113b/0x1453 [ 210.096830] ? sysctl_net_exit+0xe/0xe [ 210.096837] ? __wake_up_common+0x343/0x343 [ 210.096843] ? insert_work+0x107/0x163 [ 210.096850] invalid_op+0x1b/0x40 [ 210.096888] RIP: 0010:hci_debugfs_create_conn+0x244/0x26a [bluetooth] [ 210.096892] RSP: 0018:ffff880094a0f970 EFLAGS: 00010296 [ 210.096898] RAX: 0000000000000000 RBX: ffff880107e170e8 RCX: ffff880107e17160 [ 210.096902] RDX: 000000000000002f RSI: ffff88013b80ed40 RDI: ffffffffa058b940 [ 210.096906] RBP: ffff88011b2b0578 R08: 00000000852f0ec9 R09: ffffffff81cfcf9b [ 210.096909] R10: 00000000d21bdad7 R11: 0000000000000001 R12: ffff8800967b0488 [ 210.096913] R13: ffff880107e17168 R14: 0000000000000068 R15: ffff8800949c0008 [ 210.096920] ? __sk_destruct+0x2c6/0x2d4 [ 210.096959] hci_event_packet+0xff5/0x7de2 [bluetooth] [ 210.096969] ? __local_bh_enable_ip+0x43/0x5b [ 210.097004] ? l2cap_sock_recv_cb+0x158/0x166 [bluetooth] [ 210.097039] ? hci_le_meta_evt+0x2bb3/0x2bb3 [bluetooth] [ 210.097075] ? l2cap_ertm_init+0x94e/0x94e [bluetooth] [ 210.097093] ? xhci_urb_enqueue+0xbd8/0xcf5 [xhci_hcd] [ 210.097102] ? __accumulate_pelt_segments+0x24/0x33 [ 210.097109] ? __accumulate_pelt_segments+0x24/0x33 [ 210.097115] ? __update_load_avg_se.isra.2+0x217/0x3a4 [ 210.097122] ? set_next_entity+0x7c3/0x12cd [ 210.097128] ? pick_next_entity+0x25e/0x26c [ 210.097135] ? pick_next_task_fair+0x2ca/0xc1a [ 210.097141] ? switch_mm_irqs_off+0x346/0xb4f [ 210.097147] ? __switch_to+0x769/0xbc4 [ 210.097153] ? compat_start_thread+0x66/0x66 [ 210.097188] ? hci_conn_check_link_mode+0x1cd/0x1cd [bluetooth] [ 210.097195] ? finish_task_switch+0x392/0x431 [ 210.097228] ? hci_rx_work+0x154/0x487 [bluetooth] [ 210.097260] hci_rx_work+0x154/0x487 [bluetooth] [ 210.097269] process_one_work+0x579/0x9e9 [ 210.097277] worker_thread+0x68f/0x804 [ 210.097285] kthread+0x31c/0x32b [ 210.097292] ? rescuer_thread+0x70c/0x70c [ 210.097299] ? kthread_create_on_node+0xa3/0xa3 [ 210.097306] ret_from_fork+0x35/0x40 [ 210.097314] Allocated by task 2040: [ 210.097323] kasan_kmalloc.part.1+0x51/0xc7 [ 210.097328] __kmalloc+0x17f/0x1b6 [ 210.097335] sk_prot_alloc+0xf2/0x1a3 [ 210.097340] sk_alloc+0x22/0x297 [ 210.097375] sco_sock_alloc.constprop.7+0x23/0x202 [bluetooth] [ 210.097410] sco_connect_cfm+0x2d0/0x566 [bluetooth] [ 210.097443] hci_conn_request_evt.isra.53+0x6d3/0x762 [bluetooth] [ 210.097476] hci_event_packet+0x85e/0x7de2 [bluetooth] [ 210.097507] hci_rx_work+0x154/0x487 [bluetooth] [ 210.097512] process_one_work+0x579/0x9e9 [ 210.097517] worker_thread+0x68f/0x804 [ 210.097523] kthread+0x31c/0x32b [ 210.097529] ret_from_fork+0x35/0x40 [ 210.097533] Freed by task 2040: [ 210.097539] kasan_slab_free+0xb3/0x15e [ 210.097544] kfree+0x103/0x1a9 [ 210.097549] __sk_destruct+0x2c6/0x2d4 [ 210.097584] sco_conn_del.isra.1+0xba/0x10e [bluetooth] [ 210.097617] hci_event_packet+0xff5/0x7de2 [bluetooth] [ 210.097648] hci_rx_work+0x154/0x487 [bluetooth] [ 210.097653] process_one_work+0x579/0x9e9 [ 210.097658] worker_thread+0x68f/0x804 [ 210.097663] kthread+0x31c/0x32b [ 210.097670] ret_from_fork+0x35/0x40 [ 210.097676] The buggy address belongs to the object at ffff880107e170e8 which belongs to the cache kmalloc-1024 of size 1024 [ 210.097681] The buggy address is located 120 bytes inside of 1024-byte region [ffff880107e170e8, ffff880107e174e8) [ 210.097683] The buggy address belongs to the page: [ 210.097689] page:ffffea00041f8400 count:1 mapcount:0 mapping: (null) index:0xffff880107e15b68 compound_mapcount: 0 [ 210.110194] flags: 0x8000000000008100(slab|head) [ 210.115441] raw: 8000000000008100 0000000000000000 ffff880107e15b68 0000000100170016 [ 210.115448] raw: ffffea0004a47620 ffffea0004b48e20 ffff88013b80ed40 0000000000000000 [ 210.115451] page dumped because: kasan: bad access detected [ 210.115454] Memory state around the buggy address: [ 210.115460] ffff880107e17000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 210.115465] ffff880107e17080: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb [ 210.115469] >ffff880107e17100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 210.115472] ^ [ 210.115477] ffff880107e17180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 210.115481] ffff880107e17200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 210.115483] ================================================================== And finally when BT_DBG() and ftrace was enabled it showed: <...>-14979 [001] .... 186.104191: sco_sock_kill <-sco_sock_close <...>-14979 [001] .... 186.104191: sco_sock_kill <-sco_sock_release <...>-14979 [001] .... 186.104192: sco_sock_kill: sk ef0497a0 state 9 <...>-14979 [001] .... 186.104193: bt_sock_unlink <-sco_sock_kill kworker/u9:2-792 [001] .... 186.104246: sco_sock_kill <-sco_conn_del kworker/u9:2-792 [001] .... 186.104248: sco_sock_kill: sk ef0497a0 state 9 kworker/u9:2-792 [001] .... 186.104249: bt_sock_unlink <-sco_sock_kill kworker/u9:2-792 [001] .... 186.104250: sco_sock_destruct <-__sk_destruct kworker/u9:2-792 [001] .... 186.104250: sco_sock_destruct: sk ef0497a0 kworker/u9:2-792 [001] .... 186.104860: hci_conn_del <-hci_event_packet kworker/u9:2-792 [001] .... 186.104864: hci_conn_del: hci0 hcon ef0484c0 handle 266 Only in the failed case, sco_sock_kill() gets called with the same sock pointer two times. Add a check for SOCK_DEAD to avoid continue killing a socket which has already been killed. Signed-off-by:Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
- 06 Jul, 2018 14 commits
-
-
Jaganath Kanakkassery authored
This implements extended LE craete connection and enhanced LE conn complete event if the controller supports. For now it is as good as legacy LE connection and event as no new features in the extended connection is handled. < HCI Command: LE Extended Create Connection (0x08|0x0043) plen 26 Filter policy: White list is not used (0x00) Own address type: Public (0x00) Peer address type: Random (0x01) Peer address: DB:7E:2E:1D:85:E8 (Static) Initiating PHYs: 0x01 Entry 0: LE 1M Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Min connection interval: 50.00 msec (0x0028) Max connection interval: 70.00 msec (0x0038) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 2 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) Status: Success (0x00) Handle: 3585 Role: Master (0x00) Peer address type: Random (0x01) Peer address: DB:7E:2E:1D:85:E8 (Static) Local resolvable private address: 00:00:00:00:00:00 (Non-Resolvable) Peer resolvable private address: 00:00:00:00:00:00 (Non-Resolvable) Connection interval: 67.50 msec (0x0036) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x00 @ MGMT Event: Device Connected (0x000b) plen 40 LE Address: DB:7E:2E:1D:85:E8 (Static) Flags: 0x00000000 Data length: 27 Name (complete): Designer Mouse Appearance: Mouse (0x03c2) Flags: 0x05 LE Limited Discoverable Mode BR/EDR Not Supported 16-bit Service UUIDs (complete): 1 entry Human Interface Device (0x1812) Signed-off-by: -
Jaganath Kanakkassery authored
This is done so that the helpers can be used for extended conn implementation which will be done in subsequent patch. Signed-off-by:
-
Jaganath Kanakkassery authored
This patch enables Extended ADV report event if extended scanning is supported in the controller and process the same. The new features are not handled and for now its as good as legacy ADV report. > HCI Event: LE Meta Event (0x3e) plen 53 LE Extended Advertising Report (0x0d) Num reports: 1 Entry 0 Event type: 0x0013 Props: 0x0013 Connectable Scannable Use legacy advertising PDUs Data status: Complete Legacy PDU Type: ADV_IND (0x0013) Address type: Random (0x01) Address: DB:7E:2E:1A:85:E8 (Static) Primary PHY: LE 1M Secondary PHY: LE 1M SID: 0x00 TX power: 0 dBm RSSI: -90 dBm (0xa6) Periodic advertising invteral: 0.00 msec (0x0000) Direct address type: Public (0x00) Direct address: 00:00:00:00:00:00 (OUI 00-00-00) Data length: 0x1b 0f 09 44 65 73 69 67 6e 65 72 20 4d 6f 75 73 65 ..Designer Mouse 03 19 c2 03 02 01 05 03 03 12 18 ........... Signed-off-by: -
Jaganath Kanakkassery authored
This implements Set extended scan param and set extended scan enable commands and use it for start LE scan based on controller support. The new features added in these commands are setting of new PHY for scanning and setting of scan duration. Both features are disabled for now, meaning only 1M PHY is set and scan duration is set to 0 which means that scanning will be done untill scan disable is called. < HCI Command: LE Set Extended Scan Parameters (0x08|0x0041) plen 8 Own address type: Random (0x01) Filter policy: Accept all advertisement (0x00) PHYs: 0x01 Entry 0: LE 1M Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Scan Enable (0x08|0x0042) plen 6 Extended scan: Enabled (0x01) Filter duplicates: Enabled (0x01) Duration: 0 msec (0x0000) Period: 0.00 sec (0x0000) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 2 Status: Success (0x00) Signed-off-by: -
Jaganath Kanakkassery authored
Introduce a helper hci_req_start_scan() which starts an LE scan and call it from passive_Scan() and active_scan(). There is not functionality change in this patch. This is basically done to enable extended scanning if the controller supports which will be done in the subsequent patch Signed-off-by:
-
Corentin Labbe authored
Nothing in tree use this header which seems a remains of a staging driver. This patch remove it. Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by:
-
Ankit Navik authored
Check for Resolv list supported by controller. So check the supported commmand first before issuing this command i.e.,HCI_OP_LE_CLEAR_RESOLV_LIST Before patch: < HCI Command: LE Read White List... (0x08|0x000f) plen 0 #55 [hci0] 13.338168 > HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 13.338842 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #57 [hci0] 13.339029 > HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 13.339939 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Resolving L.. (0x08|0x002a) plen 0 #59 [hci0] 13.340152 > HCI Event: Command Complete (0x0e) plen 5 #60 [hci0] 13.340952 LE Read Resolving List Size (0x08|0x002a) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #61 [hci0] 13.341180 > HCI Event: Command Complete (0x0e) plen 12 #62 [hci0] 13.341898 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 17040 Max RX octets: 251 Max RX time: 17040 After patch: < HCI Command: LE Read White List... (0x08|0x000f) plen 0 #55 [hci0] 28.919131 > HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 28.920016 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #57 [hci0] 28.920164 > HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 28.920873 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Resolving L.. (0x08|0x002a) plen 0 #59 [hci0] 28.921109 > HCI Event: Command Complete (0x0e) plen 5 #60 [hci0] 28.922016 LE Read Resolving List Size (0x08|0x002a) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear Resolving... (0x08|0x0029) plen 0 #61 [hci0] 28.922166 > HCI Event: Command Complete (0x0e) plen 4 #62 [hci0] 28.922872 LE Clear Resolving List (0x08|0x0029) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #63 [hci0] 28.923117 > HCI Event: Command Complete (0x0e) plen 12 #64 [hci0] 28.924030 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 17040 Max RX octets: 251 Max RX time: 17040 Signed-off-by:Ankit Navik <ankit.p.navik@intel.com> Signed-off-by:
-
Ankit Navik authored
When the controller supports the Read LE Resolv List size feature, the maximum list size are read and now stored. Before patch: < HCI Command: LE Read White List... (0x08|0x000f) plen 0 #55 [hci0] 17.979791 > HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 17.980629 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #57 [hci0] 17.980786 > HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 17.981627 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #59 [hci0] 17.981786 > HCI Event: Command Complete (0x0e) plen 12 #60 [hci0] 17.982636 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 17040 Max RX octets: 251 Max RX time: 17040 After patch: < HCI Command: LE Read White List... (0x08|0x000f) plen 0 #55 [hci0] 13.338168 > HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 13.338842 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #57 [hci0] 13.339029 > HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 13.339939 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Resolving L.. (0x08|0x002a) plen 0 #59 [hci0] 13.340152 > HCI Event: Command Complete (0x0e) plen 5 #60 [hci0] 13.340952 LE Read Resolving List Size (0x08|0x002a) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #61 [hci0] 13.341180 > HCI Event: Command Complete (0x0e) plen 12 #62 [hci0] 13.341898 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 17040 Max RX octets: 251 Max RX time: 17040 Signed-off-by: -
Sebastian Andrzej Siewior authored
The USB completion callback does not disable interrupts while acquiring the ->lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave variant of the locking primitives. Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: linux-bluetooth@vger.kernel.org Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Jian-Hong Pan authored
Without this patch we cannot turn on the Bluethooth adapter on HP 14-bs007la. T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b009 Rev= 2.00 S: Manufacturer=Realtek S: Product=802.11n WLAN Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by:
-
Michael Scott authored
After decompression of 6lowpan socket data, an IPv6 header is inserted before the existing socket payload. After this, we reset the network_header value of the skb to account for the difference in payload size from prior to decompression + the addition of the IPv6 header. However, we fail to reset the mac_header value. Leaving the mac_header value untouched here, can cause a calculation error in net/packet/af_packet.c packet_rcv() function when an AF_PACKET socket is opened in SOCK_RAW mode for use on a 6lowpan interface. On line 2088, the data pointer is moved backward by the value returned from skb_mac_header(). If skb->data is adjusted so that it is before the skb->head pointer (which can happen when an old value of mac_header is left in place) the kernel generates a panic in net/core/skbuff.c line 1717. This panic can be generated by BLE 6lowpan interfaces (such as bt0) and 802.15.4 interfaces (such as lowpan0) as they both use the same 6lowpan sources for compression and decompression. Signed-off-by:
Michael Scott <michael@opensourcefoundries.com> Acked-by:
Alexander Aring <aring@mojatatu.com> Acked-by:
Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by:
-
David S. Miller authored
Edward Cree says: ==================== IP listification follow-ups While working on IPv6 list processing, I found another bug in the IPv4 version. So this patch series has that fix, and the IPv6 version with both fixes incorporated. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Essentially the same as the ipv4 equivalents. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Edward Cree authored
If we have an L3 master device, l3mdev_ip_rcv() will steal the skb, but we were returning NET_RX_SUCCESS from ip_rcv_finish_core() which meant that ip_list_rcv_finish() would keep it on the list. Instead let's move the l3mdev_ip_rcv() call into the caller, so that our response to a steal can be different in the single packet path (return NET_RX_SUCCESS) and the list path (forget this packet and continue). Fixes: 5fa12739 ("net: ipv4: listify ip_rcv_finish") Signed-off-by:
-
- 05 Jul, 2018 3 commits
-
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used: -Wimplicit-fallthrough=2 Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used: -Wimplicit-fallthrough=2 Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
