- 26 Oct, 2023 13 commits
-
-
Stefan Binding authored
Some system suspend modes may remove power supplies. To ensure we are not running during this time, we should assert reset. Note: since the amps use a shared reset, asserting reset prior to system suspend only works if the amps are suspended in the reverse order to probe. Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231026150558.2105827-3-sbinding@opensource.cirrus.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Stefan Binding authored
This laptop has an incorrect setting in its _DSD for boost type, but the rest of the _DSD is correct, and we can still use the reset label to obtain the reset gpio. Also fix channel map so that amp 0 is right, and amp 1 is left. Fixes: 581523ee ("ALSA: hda: cs35l41: Override the _DSD for HP Zbook Fury 17 G9 to correct boost type") Signed-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-12-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The header file contains lots of outdated comments and definitions. Drop those as cleanup. Link: https://lore.kernel.org/r/20231025132314.5878-11-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-10-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-9-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-8-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-7-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-6-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-5-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-4-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-2-tiwai@suse.deSigned-off-by:
-
- 25 Oct, 2023 1 commit
-
-
Takashi Iwai authored
Like the change we've done for remove callback, the newly introduced remove_late callback should be changed to void return, too. Fixes: 17baaa1f ("ASoC: SOF: core: Add probe_early and remove_late callbacks") Acked-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231023153605.863-1-tiwai@suse.deSigned-off-by:
-
- 23 Oct, 2023 1 commit
-
-
Jaroslav Kysela authored
As discussed on alsa-devel mailing list [1], it is useful to have an open mailing list to avoid moderation delays for the kernel patch work. Use linux-sound mailing list for kernel driver related threads. In the first stage, change the list for the ALSA core, ASoC and tests. [1] https://lore.kernel.org/alsa-devel/20231019-posture-cache-fe060b@meerkat/Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Reviewed-by:
Ivan Orlov <ivan.orlov0322@gmail.com> Acked-by:
Konstantin Ryabitsev <konstantin@linuxfoundation.org> Link: https://lore.kernel.org/r/20231020071247.973909-1-perex@perex.czSigned-off-by:
-
- 21 Oct, 2023 1 commit
-
-
Takashi Iwai authored
Merge tag 'asoc-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v6.7 This is quite a large set of changes but mostly due to API cleanups and in driver specific ways rather than due to anything subsystem wide. Highlights include: - Standardisation of API prefixes on snd_soc_, removing asoc_. - GPIO API usage improvements. - Support for HDA patches. - Lots of work on SOF, including crash dump support. - Support for AMD platforms with es83xx, Awinc AT87390, many Intel platforms, many Mediatek platforms, Qualcomm SM6115, Richtek RTQ9128 and Texas Instruments TAS575x. [ the merge conflicts around SOF Intel HD-audio and CS35L41 subcodec drivers are resolved here -- tiwai ]
-
- 19 Oct, 2023 24 commits
-
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Two nice cleanups from Brent Lu and Charles Keepax, and one RaptorLake update.
-
Brent Lu authored
Use intel_board module for dmic01 and dmic16k DAI link initialization. Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Brent Lu <brent.lu@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20231019173411.166759-11-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Brent Lu authored
Use intel_board module for dmic01 and dmic16k DAI link initialization. Reviewed-by:
-
Brent Lu authored
Use intel_board module for dmic01 and dmic16k DAI link initialization. Reviewed-by:
-
Brent Lu authored
Use intel_board module for dmic01 and dmic16k DAI link initialization. Reviewed-by:
-
Brent Lu authored
Add functions for machine drivers to initialize dmic01 and dmic16k DAI links. Reviewed-by:
-
Terry Cheong authored
Adding support back to RPL devices that lost audio after the RPL/ADL split. The hardware configuration is: SSP0: NAU88L25/NAU88L25YGB codec SSP1: MAX98360A amplifier Reviewed-by:
Terry Cheong <htcheong@chromium.org> Signed-off-by:
-
Charles Keepax authored
cs42l43 supports 4 hardwired microphones, but only supports up to 2 microphone headsets. Only dataport 1 can support 4 channel capture, but that is currently used for the headset microphone. Switch things around such that DP1 is used for the builtin mics and DP2 is used for the headset microphones. Reviewed-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Charles Keepax authored
It makes sense to report the microphone separately from the headphones, that way ALSA UCM can differentiate between switching the playback and the capture. For example, still using the built-in microphone path when a 3-pole headset is inserted. Reviewed-by:
-
Charles Keepax authored
No functional change, just some trivial whitespace fixups. Reviewed-by:
-
Charles Keepax authored
When adding CODECs to a DAI link, the code should stop processing more CODECs when the expected number of CODECs are discovered. This fixes a small corner case issue introduced when support for different devices on the same SoundWire link was added. In the case of aggregated devices everything is fine, as all devices intended for the DAI link will be marked with the same group and any not intended for that DAI are skipped by the group check. However for non-aggregated devices the group check is bypassed and the current code does not stop after it has found the first device. Meaning if additional non-aggregated devices are present on the same SoundWire link they will be erroneously added into the DAI link. Fix this issue, and provide a small optimisation by ceasing to process devices once we have reached the required number of devices for the current DAI link. Fixes: 317dcdec ("ASoC: intel: sof_sdw: Allow different devices on the same link") Signed-off-by:
-
Marco Felsch authored
Switch to gpiod_set_value_cansleep() to support gpiochips which can sleep like i2c gpio expanders. Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20231019131806.381280-1-m.felsch@pengutronix.deSigned-off-by:
-
Mark Brown authored
Merge series from xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com>: To use RT5650 as the codec and the amp, add a new sound card named mt8186_rt5650.
-
Maarten Lankhorst authored
Now that all drivers have moved from modprobe loading to handling -EPROBE_DEFER, we can remove the argument again. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20231009115437.99976-14-maarten.lankhorst@linux.intel.comSigned-off-by:
-
Maarten Lankhorst authored
Now that we can use -EPROBE_DEFER, it's no longer required to spin off the snd_hdac_i915_init into a workqueue. Use the -EPROBE_DEFER mechanism instead, which must be returned in the probe function. The previously added probe_early can be used for this, and we also use the newly added remove_late for unbinding afterwards. Signed-off-by:
-
Maarten Lankhorst authored
Now that we can use -EPROBE_DEFER, it's no longer required to spin off the snd_hdac_i915_init into a workqueue. It's likely the whole workqueue can be destroyed, but I don't have the means to test this. Removing the workqueue would simplify init even further, but is left as exercise for the reviewer. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20231009115437.99976-12-maarten.lankhorst@linux.intel.comSigned-off-by:
-
Maarten Lankhorst authored
Now that we can use -EPROBE_DEFER, it's no longer required to spin off the snd_hdac_i915_init into a workqueue. Use the -EPROBE_DEFER mechanism instead, which must be returned in the probe function. Signed-off-by:
-
Maarten Lankhorst authored
Now that we can use -EPROBE_DEFER, it's no longer required to spin off the snd_hdac_i915_init into a workqueue. It's likely the whole workqueue can be destroyed, but I don't have the means to test this. Removing the workqueue would simplify init even further, but is left as exercise for the reviewer. Signed-off-by:
-
Maarten Lankhorst authored
Xe is a new driver for intel GPU's that shares the sound related code with i915. The modprobe mechanism is being replaced by the -EPROBE_DEFER mechanism, so we don't need to add a modprobe xe call. Adding this would have required a telepathy module to correctly guess whether to load i915 or xe. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
-
Maarten Lankhorst authored
Xe is a new GPU driver that re-uses the display (and sound) code from i915. It's no longer possible to load i915, as the GPU can be driven by the xe driver instead. The new behavior will return -EPROBE_DEFER, and wait for a compatible driver to be loaded instead of modprobing i915. Converting all drivers at the same time is a lot of work, instead we will convert each user one by one. Signed-off-by:
-
Maarten Lankhorst authored
Selecting CONFIG_DRM selects CONFIG_VIDEO_NOMODESET, which exports video_firmware_drivers_only(). This can be used as a first approximation on whether i915 will be available. It's safe to use as this is only built when CONFIG_SND_HDA_I915 is selected by CONFIG_I915. It's not completely fool proof, as you can boot with "nomodeset i915.modeset=1" to make i915 load regardless, or use "i915.force_probe=!*" to never load i915, but the common case of booting with nomodeset to disable all GPU drivers this will work as intended. Because of this, we add an extra module parameter, snd_hda_core.gpu_bind that can be used to signal users intent. -1 follows nomodeset, 0 disables binding, 1 forces wait/-EPROBE_DEFER on binding. Signed-off-by:
-
Maarten Lankhorst authored
Add missing pci_set_drv to NULL call on error. Signed-off-by:
-
Maarten Lankhorst authored
The hda_codec_i915_init() errors are ignored in hda_init() so it can never return -EPROBE_DEFER. Fix this before we move the call to hda_init() from the deferred probe to early probe. While at it, also fix error handling when hda_dsp_ctrl_get_caps fails. Suggested-by:
-
Pierre-Louis Bossart authored
This patch moves the initial parts of the probe to the probe_early() callback, which provides a much faster decision on whether the SOF driver shall deal with a specific platform or yield to other Intel drivers. This is a limited functionality change, the bigger change is to move the i915/Xe initialization to the probe_early(). Signed-off-by:
-
