Now that we don't need to print the IP/ADDR for callindent the DSO is
also not printed. It's useful for some cases, so add an own DSO printout
for callindent for the case when IP/ADDR is not enabled.

Before:

% perf script --itrace=cr -F +callindent,-ip,-sym,-symoff,-addr
         swapper     0 [000]  3377.917072:          1   branches: pt_config
         swapper     0 [000]  3377.917072:          1   branches:     pt_config
         swapper     0 [000]  3377.917072:          1   branches:     pt_event_add
         swapper     0 [000]  3377.917072:          1   branches:     perf_pmu_enable
         swapper     0 [000]  3377.917072:          1   branches:     perf_pmu_nop_void
         swapper     0 [000]  3377.917072:          1   branches:     event_sched_in.isra.107
         swapper     0 [000]  3377.917072:          1   branches:     __x86_indirect_thunk_rax
         swapper     0 [000]  3377.917072:          1   branches:     perf_pmu_nop_int
         swapper     0 [000]  3377.917072:          1   branches:     group_sched_in
         swapper     0 [000]  3377.917072:          1   branches:     event_filter_match
         swapper     0 [000]  3377.917072:          1   branches:     event_filter_match
         swapper     0 [000]  3377.917072:          1   branches:     group_sched_in

After:

         swapper     0 [000]  3377.917072:          1   branches: ([unknown])   pt_config
         swapper     0 [000]  3377.917072:          1   branches: ([kernel.kallsyms])       pt_config
         swapper     0 [000]  3377.917072:          1   branches: ([kernel.kallsyms])       pt_event_add
         swapper     0 [000]  3377.917072:          1   branches: ([kernel.kallsyms])       perf_pmu_enable
         swapper     0 [000]  3377.917072:          1   branches: ([kernel.kallsyms])       perf_pmu_nop_void
         swapper     0 [000]  3377.917072:          1   branches: ([kernel.kallsyms])       event_sched_in.isra.107
         swapper     0 [000]  3377.917072:          1   branches: ([kernel.kallsyms])       __x86_indirect_thunk_rax
         swapper     0 [000]  3377.917072:          1   branches: ([kernel.kallsyms])       perf_pmu_nop_int
         swapper     0 [000]  3377.917072:          1   branches: ([kernel.kallsyms])       group_sched_in
         swapper     0 [000]  3377.917072:          1   branches: ([kernel.kallsyms])       event_filter_match
         swapper     0 [000]  3377.917072:          1   branches: ([kernel.kallsyms])       event_filter_match
         swapper     0 [000]  3377.917072:          1   branches: ([kernel.kallsyms])       group_sched_in
         swapper     0 [000]  3377.917072:          1   branches: ([kernel.kallsyms])           __x86_indirect_thunk_rax
         swapper     0 [000]  3377.917072:          1   branches: ([kernel.kallsyms])           perf_pmu_nop_txn
         swapper     0 [000]  3377.917072:          1   branches: ([kernel.kallsyms])           event_sched_in.isra.107

(in the kernel case of course it's not very useful, but it's important
with user programs where symbols are not unique)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Link: http://lkml.kernel.org/r/20180918123214.26728-6-andi@firstfloor.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Currently sym and dso require printing ip and addr because the print
function is tied to those outputs. With callindent it makes sense to
print the symbol or dso without numerical IP or ADDR. So change the
dependency check to only check the underlying attribute.

Also the branch target output relies on the user_set flag to determine
if the branch target should be implicitely printed. When modifying the
fields with + or - also set user_set, so that ADDR can be removed. We
also need to set wildcard_set to make the initial sanity check pass.

This allows to remove a lot of noise in callindent output by dropping
the numerical addresses, which are not all that useful.

Before

% perf script --itrace=cr -F +callindent
         swapper     0 [000] 156546.354971:          1   branches: pt_config                                       0 [unknown] ([unknown]) => ffffffff81010486 pt_config ([kernel.kallsyms])
         swapper     0 [000] 156546.354971:          1   branches:     pt_config                    ffffffff81010499 pt_config ([kernel.kallsyms]) => ffffffff8101063e pt_event_add ([kernel.kallsyms])
         swapper     0 [000] 156546.354971:          1   branches:     pt_event_add                 ffffffff81010635 pt_event_add ([kernel.kallsyms]) => ffffffff8115e687 event_sched_in.isra.107 ([kernel.kallsyms])
         swapper     0 [000] 156546.354971:          1   branches:     perf_pmu_enable              ffffffff8115e726 event_sched_in.isra.107 ([kernel.kallsyms]) => ffffffff811579b0 perf_pmu_enable ([kernel.kallsyms])
         swapper     0 [000] 156546.354971:          1   branches:     perf_pmu_nop_void            ffffffff81151730 perf_pmu_nop_void ([kernel.kallsyms]) => ffffffff8115e72b event_sched_in.isra.107 ([kernel.kallsyms])
         swapper     0 [000] 156546.354971:          1   branches:     event_sched_in.isra.107      ffffffff8115e737 event_sched_in.isra.107 ([kernel.kallsyms]) => ffffffff8115e7a5 group_sched_in ([kernel.kallsyms])
         swapper     0 [000] 156546.354971:          1   branches:     __x86_indirect_thunk_rax     ffffffff8115e7f6 group_sched_in ([kernel.kallsyms]) => ffffffff81a03000 __x86_indirect_thunk_rax ([kernel.kallsyms])

After

% perf script --itrace=cr -F +callindent,-ip,-sym,-symoff
       swapper     0 [000] 156546.354971:          1   branches:  pt_config
         swapper     0 [000] 156546.354971:          1   branches:      pt_config
         swapper     0 [000] 156546.354971:          1   branches:      pt_event_add
         swapper     0 [000] 156546.354971:          1   branches:       perf_pmu_enable
         swapper     0 [000] 156546.354971:          1   branches:       perf_pmu_nop_void
         swapper     0 [000] 156546.354971:          1   branches:       event_sched_in.isra.107
         swapper     0 [000] 156546.354971:          1   branches:       __x86_indirect_thunk_rax
         swapper     0 [000] 156546.354971:          1   branches:       perf_pmu_nop_int
         swapper     0 [000] 156546.354971:          1   branches:       group_sched_in
         swapper     0 [000] 156546.354971:          1   branches:       event_filter_match
         swapper     0 [000] 156546.354971:          1   branches:       event_filter_match
         swapper     0 [000] 156546.354971:          1   branches:       group_sched_in
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Link: http://lkml.kernel.org/r/20180918123214.26728-5-andi@firstfloor.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add an interface to the auto pager code that allows callers to overwrite
the pager.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20180918123214.26728-3-andi@firstfloor.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

I often forget all the options that --itrace accepts. Instead of burying
them in the man page only report them in the normal command line help
too to make them easier accessible.

v2: Align
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Link: http://lkml.kernel.org/r/20180914031038.4160-2-andi@firstfloor.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

There isn't subcommand `version` when typing `perf help`.

Before :

  $ perf help | grep version
   usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]

So add perf-version in command-list.txt for listing it when typing `perf
help`.

After :

$ perf help | grep version

 usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
   version         display the version of perf binary
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20180919074911.41931-1-qpakzk@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When building in ClearLinux using 'make PYTHON=python3' with gcc 8.2.1
it fails with:

    GEN      /tmp/build/perf/python/perf.so
  In file included from /usr/include/python3.7m/Python.h:126,
                   from /git/linux/tools/perf/util/python.c:2:
  /usr/include/python3.7m/import.h:58:24: error: redundant redeclaration of ‘_PyImport_AddModuleObject’ [-Werror=redundant-decls]
   PyAPI_FUNC(PyObject *) _PyImport_AddModuleObject(PyObject *, PyObject *);
                          ^~~~~~~~~~~~~~~~~~~~~~~~~
  /usr/include/python3.7m/import.h:47:24: note: previous declaration of ‘_PyImport_AddModuleObject’ was here
   PyAPI_FUNC(PyObject *) _PyImport_AddModuleObject(PyObject *name,
                          ^~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors
  error: command 'gcc' failed with exit status 1

And indeed there is a redundant declaration in that Python.h file, one
with parameter names and the other without, so just add
-Wno-error=redundant-decls to the python setup instructions.

Now perf builds with gcc in ClearLinux with the following Dockerfile:

  # docker.io/acmel/linux-perf-tools-build-clearlinux:latest
  FROM docker.io/clearlinux:latest
  MAINTAINER Arnaldo Carvalho de Melo <acme@kernel.org>
  RUN swupd update && \
      swupd bundle-add sysadmin-basic-dev
  RUN mkdir -m 777 -p /git /tmp/build/perf /tmp/build/objtool /tmp/build/linux && \
      groupadd -r perfbuilder && \
      useradd -m -r -g perfbuilder perfbuilder && \
      chown -R perfbuilder.perfbuilder /tmp/build/ /git/
  USER perfbuilder
  COPY rx_and_build.sh /
  ENV EXTRA_MAKE_ARGS=PYTHON=python3
  ENTRYPOINT ["/rx_and_build.sh"]

Now to figure out why the build fails with clang, that is present in the
above container as detected by the rx_and_build.sh script:

  clang version 6.0.1 (tags/RELEASE_601/final)
  Target: x86_64-unknown-linux-gnu
  Thread model: posix
  InstalledDir: /usr/sbin
  make: Entering directory '/git/linux/tools/perf'
    BUILD:   Doing 'make -j4' parallel build
    HOSTCC   /tmp/build/perf/fixdep.o
    HOSTLD   /tmp/build/perf/fixdep-in.o
    LINK     /tmp/build/perf/fixdep

  Auto-detecting system features:
  ...                         dwarf: [ OFF ]
  ...            dwarf_getlocations: [ OFF ]
  ...                         glibc: [ OFF ]
  ...                          gtk2: [ OFF ]
  ...                      libaudit: [ OFF ]
  ...                        libbfd: [ OFF ]
  ...                        libelf: [ OFF ]
  ...                       libnuma: [ OFF ]
  ...        numa_num_possible_cpus: [ OFF ]
  ...                       libperl: [ OFF ]
  ...                     libpython: [ OFF ]
  ...                      libslang: [ OFF ]
  ...                     libcrypto: [ OFF ]
  ...                     libunwind: [ OFF ]
  ...            libdw-dwarf-unwind: [ OFF ]
  ...                          zlib: [ OFF ]
  ...                          lzma: [ OFF ]
  ...                     get_cpuid: [ OFF ]
  ...                           bpf: [ OFF ]

  Makefile.config:331: *** No gnu/libc-version.h found, please install glibc-dev[el].  Stop.
  make[1]: *** [Makefile.perf:206: sub-make] Error 2
  make: *** [Makefile:70: all] Error 2
  make: Leaving directory '/git/linux/tools/perf'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thiago Macieira <thiago.macieira@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-c3khb9ac86s00qxzjrueomme@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Building the perf CTF converter fails with gcc 4.8.4 on Ubuntu 14.04
with the following error:

  error: missing initializer for field ‘fd’ of ‘struct perf_data_file’
  [-Werror=missing-field-initializers]

Per 4b838b0d ("perf tools: Add compression id into 'struct
kmod_path'") and the ensuing discussion on the mailing list, it appears
that this affects other distributions and gcc versions.
Signed-off-by: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180829201648.19588-1-jeremie.galarneau@efficios.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It will be used outside of util object in following patches.

Committer note:

We need to have the header with the definition for loff_t in util.h
since we now use it in the copyfile_offset() signature.

Also move that prototype closer to the other copyfile_ prefixed
functions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180913125450.21342-10-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The struct perf_mmap map argument will hold the file pointer to write
the data to.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180913125450.21342-5-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The perf_mmap struct will hold a file pointer to write the mmap's
contents, so we need to propagate it down the stack to record__write
callers instead of its member the auxtrace_mmap struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180913125450.21342-4-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Now that we keep a perf_tool pointer inside perf_session, there's no need
to have a perf_tool argument in the event_op3 callback. Remove it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180913125450.21342-3-jolsa@kernel.org
[ Fix the builtin-inject.c build for !HAVE_AUXTRACE_SUPPORT ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Now that we keep a perf_tool pointer inside perf_session, there's no
need to have a perf_tool argument in the event_op2 callback. Remove it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180913125450.21342-2-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Use PTR_ERR_OR_ZERO() in bpf__setup_stdout() return code instead of open
coded equivalent.
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1536284082-23466-2-git-send-email-dingxiang@cmss.chinamobile.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add PTR_ERR_OR_ZERO, so that tools can use it, just like the kernel.
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1536284082-23466-1-git-send-email-dingxiang@cmss.chinamobile.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Stephane reported a possible issue in the ordered events code, which
could lead to allocating more memory than guarded by max_alloc_size.

He also suggested the fix to properly check that the new size is below
the max_alloc_size limit.
Reported-by: Stephane Eranian <eranian@google.com>
Suggested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180907102455.7030-2-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When ordering events, we use preallocated buffers to store separate
events.  Those buffers currently don't have their own struct, but since
they are basically an array of 'struct ordered_event' objects, we use
the first event to hold buffers data - list head, that holds all buffers
together:

   struct ordered_events {
     ...
     struct ordered_event *buffer;
     ...
   };

   struct ordered_event {
     u64               timestamp;
     u64               file_offset;
     union perf_event  *event;
     struct list_head  list;
   };

This is quite convoluted and error prone as demonstrated by free-ing
issue discovered and fixed by Stephane in here [1].

This patch adds the 'struct ordered_events_buffer' object, that holds
the buffer data and frees it up properly.

[1] - https://marc.info/?l=linux-kernel&m=153376761329335&w=2Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Stephane Eranian <eranian@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180907102455.7030-1-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We don't have a 'perf test' entry available to test the watchpoint
functionality.

Add a simple set of tests:

 - Read only watchpoint
 - Write only watchpoint
 - Read / Write watchpoint
 - Runtime watchpoint modification

Ex.: on powerpc:

  $ sudo perf test 22
  22: Watchpoint                                            :
  22.1: Read Only Watchpoint                                : Ok
  22.2: Write Only Watchpoint                               : Ok
  22.3: Read / Write Watchpoint                             : Ok
  22.4: Modify Watchpoint                                   : Ok
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180912061229.22832-1-ravi.bangoria@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It has been pointed out to me many times that it is useful to be able to
switch off AUX records to save the bandwidth for records that actually
matter, for example, in AUX overwrite mode.

The usefulness of PERF_RECORD_AUX is in some of its flags, like the
TRUNCATED flag that tells the decoder where exactly gaps in the trace
are.  The OVERWRITE flag, on the other hand will be set on every single
record in overwrite mode. However, a PERF_RECORD_AUX[flags=OVERWRITE] is
generated on every target task's sched_out, which over time adds up to a
lot of useless information.

If any folks out there have userspace that depends on a constant stream
of OVERWRITE records for a good reason, they'll have to let us know.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Markus T Metzger <markus.t.metzger@intel.com>
Link: http://lkml.kernel.org/r/20180404145323.28651-1-alexander.shishkin@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick up fixes.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The dependency for the man page rule using asciidoctor incorrectly
specifies a source file in $(OUTPUT).  When building out-of-tree, the
source file is not found, resulting in a fall-back to the following rule
which uses xmlto.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180916151704.GF4765@decadent.org.uk
Fixes: ffef80ec ("perf Documentation: Support for asciidoctor")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Same problem that got fixed in a similar fashion in tools/perf/ in
c8b5f2c9 ("tools: Introduce str_error_r()"), fix it in the same
way, licensing needs to be sorted out to libbpf to use libapi, so,
for this simple case, just get the same wrapper in tools/lib/bpf.

This makes libbpf and its users (bpftool, selftests, perf) to build
again in Alpine Linux 3.[45678] and edge.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Fixes: 1ce6a9fc ("bpf: fix build error in libbpf with EXTRA_CFLAGS="-Wp, -D_FORTIFY_SOURCE=2 -O2"")
Link: https://lkml.kernel.org/r/20180917151636.GA21790@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

'pt_cap_group' is written to in pt_pmu_hw_init() and not modified after.
This makes it a suitable candidate for annotating as __ro_after_init.
Signed-off-by: Zubin Mithra <zsm@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20180912164510.23444-1-zsm@chromium.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-urgent-for-mingo-4.19-20180912' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

- Fix finding a symbol by name when multiple maps use the same backing DSO,
  so we must first see if that symbol name is in the DSO, then see if it is
  inside the range of addresses for that specific map (Adrian Hunter)

- Update the tools copies of UAPI headers, which silences the warnings
  emitted when building the tools and in some cases, like for the new
  KVM ioctls, results in 'perf trace' being able to translate that
  ioctl number to a string (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Instead of calling BUG_ON(), if we find a kprobe in use on free kprobe
list, just remove it from the list and keep it on kprobe hash list
as same as other in-use kprobes.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/153666126882.21306.10738207224288507996.stgit@devboxSigned-off-by: Ingo Molnar <mingo@kernel.org>

Make reuse_unused_kprobe() to return error code if
it fails to reuse unused kprobe for optprobe instead
of calling BUG_ON().
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/153666124040.21306.14150398706331307654.stgit@devboxSigned-off-by: Ingo Molnar <mingo@kernel.org>

Since reuse_unused_kprobe() is called when the given kprobe
is unused, checking it inside again with BUG_ON() is
pointless. Remove it.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/153666121154.21306.17540752948574483565.stgit@devboxSigned-off-by: Ingo Molnar <mingo@kernel.org>

Before calling add_new_kprobe(), aggr_probe's GONE
flag and kprobe GONE flag are cleared. We don't need
to worry about that flag at this point.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/153666118298.21306.4915366706875652652.stgit@devboxSigned-off-by: Ingo Molnar <mingo@kernel.org>

All aggr_probes at this line are already disarmed by
disable_kprobe() or checked by kprobe_disarmed().

So this BUG_ON() is pointless, remove it.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/153666115463.21306.8799008438116029806.stgit@devboxSigned-off-by: Ingo Molnar <mingo@kernel.org>

Commit 1c5aae77 ("perf machine: Create maps for x86 PTI entry
trampolines") revealed a problem with maps__find_symbol_by_name() that
resulted in probes not being found e.g.

	$ sudo perf probe xsk_mmap
	xsk_mmap is out of .text, skip it.
	Probe point 'xsk_mmap' not found.
	   Error: Failed to add events.

maps__find_symbol_by_name() can optionally return the map of the found
symbol. It can get the map wrong because, in fact, the symbol is found
on the map's dso, not allowing for the possibility that the dso has more
than one map. Fix by always checking the map contains the symbol.
Reported-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Björn Töpel <bjorn.topel@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 1c5aae77 ("perf machine: Create maps for x86 PTI entry trampolines")
Link: http://lkml.kernel.org/r/20180907085116.25782-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To get the changes in:

	3e7a50ce ("net: report min and max mtu network device settings")
	2756f68c ("net: bridge: add support for backup port")
	a25717d2 ("xdp: support simultaneous driver and hw XDP attachment")
	4f91da26 ("xdp: add per mode attributes for attached programs")
	f203b76d ("xfrm: Add virtual xfrm interfaces")

Silencing this libbpf build warning:

	Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-xd9ztioa894zemv8ag8kg64u@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To get the changes in:

	c48300c9 ("vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definition")

This makes 'perf trace' and other tools in the future using its
beautifiers in a libbeauty.so library be able to translate these new
ioctl to strings:

  $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh  > /tmp/after
  $ diff -u /tmp/before /tmp/after
  --- /tmp/before	2018-09-11 13:10:57.923038244 -0300
  +++ /tmp/after	2018-09-11 13:11:20.329012685 -0300
  @@ -15,6 +15,7 @@
        [0x22] = "SET_VRING_ERR",
        [0x23] = "SET_VRING_BUSYLOOP_TIMEOUT",
        [0x24] = "GET_VRING_BUSYLOOP_TIMEOUT",
  +     [0x25] = "SET_BACKEND_FEATURES",
        [0x30] = "NET_SET_BACKEND",
        [0x40] = "SCSI_SET_ENDPOINT",
        [0x41] = "SCSI_CLEAR_ENDPOINT",
  @@ -27,4 +28,5 @@
   static const char *vhost_virtio_ioctl_read_cmds[] = {
        [0x00] = "GET_FEATURES",
        [0x12] = "GET_VRING_BASE",
  +	[0x26] = "GET_BACKEND_FEATURES",
  };
  $

We'll also use this to be able to express syscall filters using symbolic
these symbolic names, something like:

	# perf trace --all-cpus -e ioctl(cmd=*GET_FEATURES)

This silences the following warning during perf's build:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
  diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-35x71oei2hdui9u0tarpimbq@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To get the changes in:

	a4499382 ("KVM: s390: Add huge page enablement control")
	8fcc4b59 ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE")
	be26b3a7 ("arm64: KVM: export the capability to set guest SError syndrome")
	b7b27fac ("arm/arm64: KVM: Add KVM_GET/SET_VCPU_EVENTS")
	b0960b95 ("KVM: arm: Add 32bit get/set events support")
	a3da7b4a ("KVM: s390: add etoken support for guests")

This makes 'perf trace' automagically get aware of these new ioctls:

  $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
  $ tools/perf/trace/beauty/kvm_ioctl.sh  > /tmp/after
  $ diff -u /tmp/before /tmp/after
  --- /tmp/before	2018-09-11 11:18:29.173207586 -0300
  +++ /tmp/after	2018-09-11 11:18:38.488200446 -0300
  @@ -84,6 +84,8 @@
        [0xbb] = "MEMORY_ENCRYPT_REG_REGION",
        [0xbc] = "MEMORY_ENCRYPT_UNREG_REGION",
        [0xbd] = "HYPERV_EVENTFD",
  +     [0xbe] = "GET_NESTED_STATE",
  +     [0xbf] = "SET_NESTED_STATE",
        [0xe0] = "CREATE_DEVICE",
        [0xe1] = "SET_DEVICE_ATTR",
        [0xe2] = "G

And cures the following warning during perf's build:

	Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
	diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dongjiu Geng <gengdongjiu@huawei.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: James Morse <james.morse@arm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2vvwh2o19orn56di0ksrtgzr@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To get the changes in:

	d67b6a20 ("drm: writeback: Add client capability for exposing writeback connectors")

This is for an argument to a DRM ioctl, which is not being prettyfied in
the 'perf trace' DRM ioctl beautifier, but will now that syscalls are
starting to have pointer arguments augmented via BPF.

This time around this just cures the following warning during perf's
build:

	Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
	diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-n7qib1bac6mc6w9oke7r4qdc@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To get the changes in:

	db7a2d18 ("asm-generic: unistd.h: Wire up sys_rseq")

That wires up the new 'rsec' system call, which will automagically
support that syscall in the syscall table used by 'perf trace' on
arm/arm64.

This cures the following warning during perf's build:

	Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
	diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/n/tip-vt7k2itnitp1t9p3dp7qeb08@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To get the changes in:

	09121255 ("perf/UAPI: Clearly mark __PERF_SAMPLE_CALLCHAIN_EARLY as internal use")

This cures the following warning during perf's build:

	Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
	diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2vvwh2o19orn56di0ksrtgzr@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

x86_pmu_{format,events,attr,caps}_group is written to in
init_hw_perf_events and not modified after. This makes them suitable
candidates for annotating as __ro_after_init.
Signed-off-by: Zubin Mithra <zsm@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: groeck@chromium.org
Link: http://lkml.kernel.org/r/20180810154314.96710-1-zsm@chromium.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Perf can record user stack data in response to a synchronous request, such
as a tracepoint firing. If this happens under set_fs(KERNEL_DS), then we
end up reading user stack data using __copy_from_user_inatomic() under
set_fs(KERNEL_DS). I think this conflicts with the intention of using
set_fs(KERNEL_DS). And it is explicitly forbidden by hardware on ARM64
when both CONFIG_ARM64_UAO and CONFIG_ARM64_PAN are used.

So fix this by forcing USER_DS when recording user stack data.
Signed-off-by: Yabin Cui <yabinc@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 88b0193d ("perf/callchain: Force USER_DS when invoking perf_callchain_user()")
Link: http://lkml.kernel.org/r/20180823225935.27035-1-yabinc@google.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Vince noted that commit:

  6cbc304f ("perf/x86/intel: Fix unwind errors from PEBS entries (mk-II)")

'leaked' __PERF_SAMPLE_CALLCHAIN_EARLY into the UAPI namespace. And
while sys_perf_event_open() will error out if you try to use it, it is
exposed.

Clearly mark it for internal use only to avoid any confusion.
Requested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Problem: perf did not show branch predicted/mispredicted bit in brstack.

Output of perf -F brstack for profile collected

Before:

 0x4fdbcd/0x4fdc03/-/-/-/0
 0x45f4c1/0x4fdba0/-/-/-/0
 0x45f544/0x45f4bb/-/-/-/0
 0x45f555/0x45f53c/-/-/-/0
 0x7f66901cc24b/0x45f555/-/-/-/0
 0x7f66901cc22e/0x7f66901cc23d/-/-/-/0
 0x7f66901cc1ff/0x7f66901cc20f/-/-/-/0
 0x7f66901cc1e8/0x7f66901cc1fc/-/-/-/0

After:

 0x4fdbcd/0x4fdc03/P/-/-/0
 0x45f4c1/0x4fdba0/P/-/-/0
 0x45f544/0x45f4bb/P/-/-/0
 0x45f555/0x45f53c/P/-/-/0
 0x7f66901cc24b/0x45f555/P/-/-/0
 0x7f66901cc22e/0x7f66901cc23d/P/-/-/0
 0x7f66901cc1ff/0x7f66901cc20f/P/-/-/0
 0x7f66901cc1e8/0x7f66901cc1fc/P/-/-/0

Cause:

As mentioned in Software Development Manual vol 3, 17.4.8.1,
IA32_PERF_CAPABILITIES[5:0] indicates the format of the address that is
stored in the LBR stack. Knights Landing reports 1 (LBR_FORMAT_LIP) as
its format. Despite that, registers containing FROM address of the branch,
do have MISPREDICT bit but because of the format indicated in
IA32_PERF_CAPABILITIES[5:0], LBR did not read MISPREDICT bit.

Solution:

Teach LBR about above Knights Landing quirk and make it read MISPREDICT bit.
Signed-off-by: Jacek Tomaka <jacek.tomaka@poczta.fm>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180802013830.10600-1-jacekt@dugeo.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Signed-off-by: Ingo Molnar <mingo@kernel.org>