Skip to content

L
linux
Switch branch/tag
  1. 06 Nov, 2021 3 commits
  3. 05 Nov, 2021 25 commits
  5. 04 Nov, 2021 7 commits
  7. 03 Nov, 2021 5 commits
    • Brett Creeley's avatar
      ice: Fix race conditions between virtchnl handling and VF ndo ops · e6ba5273
      Brett Creeley authored 
      The VF can be configured via the PF's ndo ops at the same time the PF is
receiving/handling virtchnl messages. This has many issues, with
one of them being the ndo op could be actively resetting a VF (i.e.
resetting it to the default state and deleting/re-adding the VF's VSI)
while a virtchnl message is being handled. The following error was seen
because a VF ndo op was used to change a VF's trust setting while the
VIRTCHNL_OP_CONFIG_VSI_QUEUES was ongoing:

[35274.192484] ice 0000:88:00.0: Failed to set LAN Tx queue context, error: ICE_ERR_PARAM
[35274.193074] ice 0000:88:00.0: VF 0 failed opcode 6, retval: -5
[35274.193640] iavf 0000:88:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 6

Fix this by making sure the virtchnl handling and VF ndo ops that
trigger VF resets cannot run concurrently. This is done by adding a
struct mutex cfg_lock to each VF structure. For VF ndo ops, the mutex
will be locked around the critical operations and VFR. Since the ndo ops
will trigger a VFR, the virtchnl thread will use mutex_trylock(). This
is done because if any other thread (i.e. VF ndo op) has the mutex, then
that means the current VF message being handled is no longer valid, so
just ignore it.

This issue can be seen using the following commands:

for i in {0..50}; do
        rmmod ice
        modprobe ice

        sleep 1

        echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
        echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs

        ip link set ens785f1 vf 0 trust on
        ip link set ens785f0 vf 0 trust on

        sleep 2

        echo 0 > /sys/class/net/ens785f0/device/sriov_numvfs
        echo 0 > /sys/class/net/ens785f1/device/sriov_numvfs
        sleep 1
        echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
        echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs

        ip link set ens785f1 vf 0 trust on
        ip link set ens785f0 vf 0 trust on
done

Fixes: 7c710869 ("ice: Add handlers for VF netdevice operations")
Signed-off-by: default avatarBrett Creeley <brett.creeley@intel.com>
Tested-by: default avatarKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      e6ba5273
    • Brett Creeley's avatar
      ice: Fix not stopping Tx queues for VFs · b385cca4
      Brett Creeley authored 
      When a VF is removed and/or reset its Tx queues need to be
stopped from the PF. This is done by calling the ice_dis_vf_qs()
function, which calls ice_vsi_stop_lan_tx_rings(). Currently
ice_dis_vf_qs() is protected by the VF state bit ICE_VF_STATE_QS_ENA.
Unfortunately, this is causing the Tx queues to not be disabled in some
cases and when the VF tries to re-enable/reconfigure its Tx queues over
virtchnl the op is failing. This is because a VF can be reset and/or
removed before the ICE_VF_STATE_QS_ENA bit is set, but the Tx queues
were already configured via ice_vsi_cfg_single_txq() in the
VIRTCHNL_OP_CONFIG_VSI_QUEUES op. However, the ICE_VF_STATE_QS_ENA bit
is set on a successful VIRTCHNL_OP_ENABLE_QUEUES, which will always
happen after the VIRTCHNL_OP_CONFIG_VSI_QUEUES op.

This was causing the following error message when loading the ice
driver, creating VFs, and modifying VF trust in an endless loop:

[35274.192484] ice 0000:88:00.0: Failed to set LAN Tx queue context, error: ICE_ERR_PARAM
[35274.193074] ice 0000:88:00.0: VF 0 failed opcode 6, retval: -5
[35274.193640] iavf 0000:88:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 6

Fix this by always calling ice_dis_vf_qs() and silencing the error
message in ice_vsi_stop_tx_ring() since the calling code ignores the
return anyway. Also, all other places that call ice_vsi_stop_tx_ring()
catch the error, so this doesn't affect those flows since there was no
change to the values the function returns.

Other solutions were considered (i.e. tracking which VF queues had been
"started/configured" in VIRTCHNL_OP_CONFIG_VSI_QUEUES, but it seemed
more complicated than it was worth. This solution also brings in the
chance for other unexpected conditions due to invalid state bit checks.
So, the proposed solution seemed like the best option since there is no
harm in failing to stop Tx queues that were never started.

This issue can be seen using the following commands:

for i in {0..50}; do
        rmmod ice
        modprobe ice

        sleep 1

        echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
        echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs

        ip link set ens785f1 vf 0 trust on
        ip link set ens785f0 vf 0 trust on

        sleep 2

        echo 0 > /sys/class/net/ens785f0/device/sriov_numvfs
        echo 0 > /sys/class/net/ens785f1/device/sriov_numvfs
        sleep 1
        echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
        echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs

        ip link set ens785f1 vf 0 trust on
        ip link set ens785f0 vf 0 trust on
done

Fixes: 77ca27c4 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap")
Signed-off-by: default avatarBrett Creeley <brett.creeley@intel.com>
Tested-by: default avatarKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      b385cca4
    • Sylwester Dziedziuch's avatar
      ice: Fix replacing VF hardware MAC to existing MAC filter · ce572a5b
      Sylwester Dziedziuch authored 
      VF was not able to change its hardware MAC address in case
the new address was already present in the MAC filter list.
Change the handling of VF add mac request to not return
if requested MAC address is already present on the list
and check if its hardware MAC needs to be updated in this case.

Fixes: ed4c068d ("ice: Enable ip link show on the PF to display VF unicast MAC(s)")
Signed-off-by: default avatarSylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Tested-by: default avatarTony Brelinski <tony.brelinski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      ce572a5b
    • Brett Creeley's avatar
      ice: Remove toggling of antispoof for VF trusted promiscuous mode · 0299faea
      Brett Creeley authored 
      Currently when a trusted VF enables promiscuous mode spoofchk will be
disabled. This is wrong and should only be modified from the
ndo_set_vf_spoofchk callback. Fix this by removing the call to toggle
spoofchk for trusted VFs.

Fixes: 01b5e89a ("ice: Add VF promiscuous support")
Signed-off-by: default avatarBrett Creeley <brett.creeley@intel.com>
Tested-by: default avatarTony Brelinski <tony.brelinski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      0299faea
    • Brett Creeley's avatar
      ice: Fix VF true promiscuous mode · 1a8c7778
      Brett Creeley authored 
      When a VF requests promiscuous mode and it's trusted and true promiscuous
mode is enabled the PF driver attempts to enable unicast and/or
multicast promiscuous mode filters based on the request. This is fine,
but there are a couple issues with the current code.

[1] The define to configure the unicast promiscuous mode mask also
    includes bits to configure the multicast promiscuous mode mask, which
    causes multicast to be set/cleared unintentionally.
[2] All 4 cases for enable/disable unicast/multicast mode are not
    handled in the promiscuous mode message handler, which causes
    unexpected results regarding the current promiscuous mode settings.

To fix [1] make sure any promiscuous mask defines include the correct
bits for each of the promiscuous modes.

To fix [2] make sure that all 4 cases are handled since there are 2 bits
(FLAG_VF_UNICAST_PROMISC and FLAG_VF_MULTICAST_PROMISC) that can be
either set or cleared. Also, since either unicast and/or multicast
promiscuous configuration can fail, introduce two separate error values
to handle each of these cases.

Fixes: 01b5e89a ("ice: Add VF promiscuous support")
Signed-off-by: default avatarBrett Creeley <brett.creeley@intel.com>
Tested-by: default avatarTony Brelinski <tony.brelinski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      1a8c7778
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7