- 06 Jan, 2024 1 commit
-
-
John Harrison authored
A failure to load the HuC is occasionally observed where the cause is believed to be a low GT frequency leading to very long load times. So a) increase the timeout so that the user still gets a working system even in the case of slow load. And b) report the frequency during the load to see if that is the cause of the slow down. Also update the similar code on the GuC load to not use uncore->gt when there is a local gt available. The two should match, but no need for unnecessary de-referencing. Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240102222202.310495-1-John.C.Harrison@Intel.com
-
- 05 Jan, 2024 2 commits
-
-
Tejas Upadhyay authored
WA 14019877138 needed for Graphics 12.70/71 both V2(Jani): - Use drm/i915 Signed-off-by:
Tejas Upadhyay <tejas.upadhyay@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
intel_wakeref_t is supposed to be a mostly opaque cookie to its users. It should only be checked for being non-zero and set to zero. Debug logging its actual value is meaningless. Switch to just debug logging whether the async_put_wakeref is non-zero. The issue dates back to much earlier than commit b49e894c ("drm/i915: Replace custom intel runtime_pm tracker with ref_tracker library"), but this is the one that brought about a build failure due to the printf format. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/r/20240102111222.2db11208@canb.auug.org.au Fixes: b49e894c ("drm/i915: Replace custom intel runtime_pm tracker with ref_tracker library") Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by:
-
- 02 Jan, 2024 1 commit
-
-
Shuicheng Lin authored
Some of the wa registers are MCR register, and EU_PERF_CNTL registers are MCR register. MCR register needs extra process for read/write. As normal MMIO register also could work with the MCR register process, change all wa registers to MCR type for code simplicity. Signed-off-by:
Shuicheng Lin <shuicheng.lin@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by:
-
- 29 Dec, 2023 4 commits
-
-
Randy Dunlap authored
Document nested struct members with full names as described in Documentation/doc-guide/kernel-doc.rst. i915_perf_types.h:341: warning: Excess struct member 'ptr_lock' description in 'i915_perf_stream' i915_perf_types.h:341: warning: Excess struct member 'head' description in 'i915_perf_stream' i915_perf_types.h:341: warning: Excess struct member 'tail' description in 'i915_perf_stream' 3 warnings as Errors Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Randy Dunlap authored
Document nested struct members with full names as described in Documentation/doc-guide/kernel-doc.rst. intel_guc.h:305: warning: Excess struct member 'lock' description in 'intel_guc' intel_guc.h:305: warning: Excess struct member 'guc_ids' description in 'intel_guc' intel_guc.h:305: warning: Excess struct member 'num_guc_ids' description in 'intel_guc' intel_guc.h:305: warning: Excess struct member 'guc_ids_bitmap' description in 'intel_guc' intel_guc.h:305: warning: Excess struct member 'guc_id_list' description in 'intel_guc' intel_guc.h:305: warning: Excess struct member 'guc_ids_in_use' description in 'intel_guc' intel_guc.h:305: warning: Excess struct member 'destroyed_contexts' description in 'intel_guc' intel_guc.h:305: warning: Excess struct member 'destroyed_worker' description in 'intel_guc' intel_guc.h:305: warning: Excess struct member 'reset_fail_worker' description in 'intel_guc' intel_guc.h:305: warning: Excess struct member 'reset_fail_mask' description in 'intel_guc' intel_guc.h:305: warning: Excess struct member 'sched_disable_delay_ms' description in 'intel_guc' intel_guc.h:305: warning: Excess struct member 'sched_disable_gucid_threshold' description in 'intel_guc' intel_guc.h:305: warning: Excess struct member 'lock' description in 'intel_guc' intel_guc.h:305: warning: Excess struct member 'gt_stamp' description in 'intel_guc' intel_guc.h:305: warning: Excess struct member 'ping_delay' description in 'intel_guc' intel_guc.h:305: warning: Excess struct member 'work' description in 'intel_guc' intel_guc.h:305: warning: Excess struct member 'shift' description in 'intel_guc' intel_guc.h:305: warning: Excess struct member 'last_stat_jiffies' description in 'intel_guc' 18 warnings as Errors Signed-off-by:
-
Randy Dunlap authored
Document nested struct members with full names as described in Documentation/doc-guide/kernel-doc.rst. intel_gsc.h:34: warning: Excess struct member 'gem_obj' description in 'intel_gsc' Also add missing field member descriptions. Signed-off-by:
-
Randy Dunlap authored
Document nested struct members with full names as described in Documentation/doc-guide/kernel-doc.rst. i915_gem_context_types.h:420: warning: Excess struct member 'lock' description in 'i915_gem_context' Signed-off-by:
-
- 22 Dec, 2023 1 commit
-
-
Umesh Nerlige Ramappa authored
On XEHP platforms user is not able to find MMIO triggered reports in the OA buffer since i915 squashes the context ID fields. These context ID fields hold the MMIO trigger markers. Update logic to not squash the context ID fields of MMIO triggered reports. Fixes: 7eeaedf7 ("drm/i915/perf: Determine context valid in OA reports") Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231219000543.1087706-1-umesh.nerlige.ramappa@intel.com
-
- 19 Dec, 2023 1 commit
-
-
Jonathan Cavitt authored
Never block for outstanding work on userptr object upon receipt of a mmu-notifier. The reason we originally did so was to immediately unbind the userptr and unpin its pages, but since that has been dropped in commit b4b9731b ("drm/i915: Simplify userptr locking"), we never return the pages to the system i.e. never drop our page->mapcount and so do not allow the page and CPU PTE to be revoked. Based on this history, we know we are safe to drop the wait entirely. Upon return from mmu-notifier, we will still have the userptr pages pinned preventing the following PTE operation (such as try_to_unmap) adjusting the vm_area_struct, so it is safe to keep the pages around for as long as we still have i/o pending. We do not have any means currently to asynchronously revalidate the userptr pages, that is always prior to next use. Signed-off-by:
Chris Wilson <chris.p.wilson@linux.intel.com> Signed-off-by:
Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by:
-
- 15 Dec, 2023 9 commits
-
-
Zhao Liu authored
The use of kmap_atomic() is being deprecated in favor of kmap_local_page()[1], and this patch converts the calls from kmap_atomic() to kmap_local_page(). The main difference between atomic and local mappings is that local mappings doesn't disable page faults or preemption (the preemption is disabled for !PREEMPT_RT case, otherwise it only disables migration). With kmap_local_page(), we can avoid the often unwanted side effect of unnecessary page faults and preemption disables. In i915_gem_execbuffer.c, eb->reloc_cache.vaddr is mapped by kmap_atomic() in eb_relocate_entry(), and is unmapped by kunmap_atomic() in reloc_cache_reset(). And this mapping/unmapping occurs in two places: one is in eb_relocate_vma(), and another is in eb_relocate_vma_slow(). The function eb_relocate_vma() or eb_relocate_vma_slow() doesn't need to disable pagefaults and preemption during the above mapping/ unmapping. So it can simply use kmap_local_page() / kunmap_local() that can instead do the mapping / unmapping regardless of the context. Convert the calls of kmap_atomic() / kunmap_atomic() to kmap_local_page() / kunmap_local(). [1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.comSuggested-by:
Ira Weiny <ira.weiny@intel.com> Suggested-by:
Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by:
Zhao Liu <zhao1.liu@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231203132947.2328805-10-zhao1.liu@linux.intel.com
-
Zhao Liu authored
The use of kmap_atomic() is being deprecated in favor of kmap_local_page()[1], and this patch converts the call from kmap_atomic() to kmap_local_page(). The main difference between atomic and local mappings is that local mappings doesn't disable page faults or preemption (the preemption is disabled for !PREEMPT_RT case, otherwise it only disables migration). With kmap_local_page(), we can avoid the often unwanted side effect of unnecessary page faults and preemption disables. There're 2 reasons why function copy_batch() doesn't need to disable pagefaults and preemption for mapping: 1. The flush operation is safe. In i915_cmd_parser.c, copy_batch() calls drm_clflush_virt_range() to use CLFLUSHOPT or WBINVD to flush. Since CLFLUSHOPT is global on x86 and WBINVD is called on each cpu in drm_clflush_virt_range(), the flush operation is global. 2. Any context switch caused by preemption or page faults (page fault may cause sleep) doesn't affect the validity of local mapping. Therefore, copy_batch() is a function where the use of kmap_local_page() in place of kmap_atomic() is correctly suited. Convert the calls of kmap_atomic() / kunmap_atomic() to kmap_local_page() / kunmap_local(). [1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.comSuggested-by:
Dave Hansen <dave.hansen@intel.com> Suggested-by:
-
Zhao Liu authored
The use of kmap_atomic() is being deprecated in favor of kmap_local_page()[1], and this patch converts the call from kmap_atomic() to kmap_local_page(). The main difference between atomic and local mappings is that local mappings doesn't disable page faults or preemption (the preemption is disabled for !PREEMPT_RT case, otherwise it only disables migration). With kmap_local_page(), we can avoid the often unwanted side effect of unnecessary page faults or preemption disables. In drm/i915/gt/uc/intel_us_fw.c, the function intel_uc_fw_copy_rsa() just use the mapping to do memory copy so it doesn't need to disable pagefaults and preemption for mapping. Thus the local mapping without atomic context (not disable pagefaults / preemption) is enough. Therefore, intel_uc_fw_copy_rsa() is a function where the use of memcpy_from_page() with kmap_local_page() in place of memcpy() with kmap_atomic() is correctly suited. Convert the calls of memcpy() with kmap_atomic() / kunmap_atomic() to memcpy_from_page() which uses local mapping to copy. [1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.com/T/#uSuggested-by:
-
Zhao Liu authored
The use of kmap_atomic() is being deprecated in favor of kmap_local_page()[1], and this patch converts the call from kmap_atomic() to kmap_local_page(). The main difference between atomic and local mappings is that local mappings doesn't disable page faults or preemption. With kmap_local_page(), we can avoid the often unwanted side effect of unnecessary page faults or preemption disables. In drm/i915/gem/selftests/i915_gem_context.c, functions cpu_fill() and cpu_check() mainly uses mapping to flush cache and check/assign the value. There're 2 reasons why cpu_fill() and cpu_check() don't need to disable pagefaults and preemption for mapping: 1. The flush operation is safe. cpu_fill() and cpu_check() call drm_clflush_virt_range() to use CLFLUSHOPT or WBINVD to flush. Since CLFLUSHOPT is global on x86 and WBINVD is called on each cpu in drm_clflush_virt_range(), the flush operation is global. 2. Any context switch caused by preemption or page faults (page fault may cause sleep) doesn't affect the validity of local mapping. Therefore, cpu_fill() and cpu_check() are functions where the use of kmap_local_page() in place of kmap_atomic() is correctly suited. Convert the calls of kmap_atomic() / kunmap_atomic() to kmap_local_page() / kunmap_local(). [1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.comSuggested-by:
-
Zhao Liu authored
The use of kmap_atomic() is being deprecated in favor of kmap_local_page()[1], and this patch converts the call from kmap_atomic() to kmap_local_page(). The main difference between atomic and local mappings is that local mappings doesn't disable page faults or preemption (the preemption is disabled for !PREEMPT_RT case, otherwise it only disables migration).. With kmap_local_page(), we can avoid the often unwanted side effect of unnecessary page faults or preemption disables. In drm/i915/gem/selftests/i915_gem_coherency.c, functions cpu_set() and cpu_get() mainly uses mapping to flush cache and assign the value. There're 2 reasons why cpu_set() and cpu_get() don't need to disable pagefaults and preemption for mapping: 1. The flush operation is safe. cpu_set() and cpu_get() call drm_clflush_virt_range() to use CLFLUSHOPT or WBINVD to flush. Since CLFLUSHOPT is global on x86 and WBINVD is called on each cpu in drm_clflush_virt_range(), the flush operation is global. 2. Any context switch caused by preemption or page faults (page fault may cause sleep) doesn't affect the validity of local mapping. Therefore, cpu_set() and cpu_get() are functions where the use of kmap_local_page() in place of kmap_atomic() is correctly suited. Convert the calls of kmap_atomic() / kunmap_atomic() to kmap_local_page() / kunmap_local(). [1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.comSuggested-by:
-
Zhao Liu authored
The use of kmap_atomic() is being deprecated in favor of kmap_local_page()[1], and this patch converts the call from kmap_atomic() to kmap_local_page(). The main difference between atomic and local mappings is that local mappings doesn't disable page faults or preemption (the preemption is disabled for !PREEMPT_RT case, otherwise it only disables migration). With kmap_local_page(), we can avoid the often unwanted side effect of unnecessary page faults or preemption disables. In drm/i915/gem/selftests/huge_pages.c, function __cpu_check_shmem() mainly uses mapping to flush cache and check the value. There're 2 reasons why __cpu_check_shmem() doesn't need to disable pagefaults and preemption for mapping: 1. The flush operation is safe. Function __cpu_check_shmem() calls drm_clflush_virt_range() to use CLFLUSHOPT or WBINVD to flush. Since CLFLUSHOPT is global on x86 and WBINVD is called on each cpu in drm_clflush_virt_range(), the flush operation is global. 2. Any context switch caused by preemption or page faults (page fault may cause sleep) doesn't affect the validity of local mapping. Therefore, __cpu_check_shmem() is a function where the use of kmap_local_page() in place of kmap_atomic() is correctly suited. Convert the calls of kmap_atomic() / kunmap_atomic() to kmap_local_page() / kunmap_local(). [1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.comSuggested-by:
-
Zhao Liu authored
The use of kmap_atomic() is being deprecated in favor of kmap_local_page()[1]. The main difference between atomic and local mappings is that local mappings doesn't disable page faults or preemption (the preemption is disabled for !PREEMPT_RT case, otherwise it only disables migration). With kmap_local_page(), we can avoid the often unwanted side effect of unnecessary page faults or preemption disables. In drm/i915/gem/i915_gem_shmem.c, the function shmem_pwrite() need to disable pagefault to eliminate the potential recursion fault[2]. But here __copy_from_user_inatomic() doesn't need to disable preemption and local mapping is valid for sched in/out. So it can use kmap_local_page() / kunmap_local() with pagefault_disable() / pagefault_enable() to replace atomic mapping. [1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.com [2]: https://patchwork.freedesktop.org/patch/295840/Suggested-by:
-
Zhao Liu authored
The use of kmap_atomic() is being deprecated in favor of kmap_local_page()[1], and this patch converts the call from kmap_atomic() + memcpy() to memcpy_[from/to]_page(), which use kmap_local_page() to build local mapping and then do memcpy(). The main difference between atomic and local mappings is that local mappings doesn't disable page faults or preemption (the preemption is disabled for !PREEMPT_RT case, otherwise it only disables migration). With kmap_local_page(), we can avoid the often unwanted side effect of unnecessary page faults and preemption disables. In drm/i915/gem/i915_gem_phys.c, the functions i915_gem_object_get_pages_phys() and i915_gem_object_put_pages_phys() don't need to disable pagefaults and preemption for mapping because of 2 reasons: 1. The flush operation is safe. In drm/i915/gem/i915_gem_object.c, i915_gem_object_get_pages_phys() and i915_gem_object_put_pages_phys() calls drm_clflush_virt_range() to use CLFLUSHOPT or WBINVD to flush. Since CLFLUSHOPT is global on x86 and WBINVD is called on each cpu in drm_clflush_virt_range(), the flush operation is global. 2. Any context switch caused by preemption or page faults (page fault may cause sleep) doesn't affect the validity of local mapping. Therefore, i915_gem_object_get_pages_phys() and i915_gem_object_put_pages_phys() are two functions where the uses of local mappings in place of atomic mappings are correctly suited. Convert the calls of kmap_atomic() / kunmap_atomic() + memcpy() to memcpy_from_page() and memcpy_to_page(). [1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.comSuggested-by:
-
Zhao Liu authored
The use of kmap_atomic() is being deprecated in favor of kmap_local_page()[1], and this patch converts the call from kmap_atomic() to kmap_local_page(). The main difference between atomic and local mappings is that local mappings doesn't disable page faults or preemption (the preemption is disabled for !PREEMPT_RT case, otherwise it only disables migration). With kmap_local_page(), we can avoid the often unwanted side effect of unnecessary page faults and preemption disables. There're 2 reasons why i915_gem_object_read_from_page_kmap() doesn't need to disable pagefaults and preemption for mapping: 1. The flush operation is safe. In drm/i915/gem/i915_gem_object.c, i915_gem_object_read_from_page_kmap() calls drm_clflush_virt_range() to use CLFLUSHOPT or WBINVD to flush. Since CLFLUSHOPT is global on x86 and WBINVD is called on each cpu in drm_clflush_virt_range(), the flush operation is global. 2. Any context switch caused by preemption or page faults (page fault may cause sleep) doesn't affect the validity of local mapping. Therefore, i915_gem_object_read_from_page_kmap() is a function where the use of kmap_local_page() in place of kmap_atomic() is correctly suited. Convert the calls of kmap_atomic() / kunmap_atomic() to kmap_local_page() / kunmap_local(). And remove the redundant variable that stores the address of the mapped page since kunmap_local() can accept any pointer within the page. [1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.comSuggested-by:
-
- 14 Dec, 2023 2 commits
-
-
Haridhar Kalvala authored
Enable Force Dispatch Ends Collection for DG2. BSpec: 46001 Signed-off-by:
Haridhar Kalvala <haridhar.kalvala@intel.com> Reviewed-by:
-
Randy Dunlap authored
Use "its" for possessive form instead of "it's". Hyphenate multi-word adjectives. Correct some spelling. End one line of code with ';' instead of ','. The before and after object files are identical. Signed-off-by:
-
- 13 Dec, 2023 1 commit
-
-
Karthik Poosa authored
Updated i915 hwmon with fixes for issues reported by static analysis tool. Fixed integer overflow with upcasting. v2: - Added Fixes tag (Badal). - Updated commit message as per review comments (Anshuman). Fixes: 4c2572fe ("drm/i915/hwmon: Expose power1_max_interval") Reviewed-by:
Badal Nilawar <badal.nilawar@intel.com> Reviewed-by:
Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by:
Karthik Poosa <karthik.poosa@intel.com> Signed-off-by:
-
- 11 Dec, 2023 1 commit
-
-
Colin Ian King authored
There is a spelling mistake in a pr_err error message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
- 08 Dec, 2023 2 commits
-
-
Andi Shyti authored
Given a reference to "guc", the guc_to_i915() returns the pointer to "i915" private data. Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231206184322.57111-1-andi.shyti@linux.intel.com
-
Andrzej Hajda authored
After i915_active_unlock_wait i915_active can be still non-idle due to barrier async handling in signal_irq_work. As a result one can observe following errors: bcs0: heartbeat pulse did not flush idle tasks *ERROR* pulse active pulse_active [i915]:pulse_retire [i915] *ERROR* pulse count: 0 *ERROR* pulse preallocated barriers? no To prevent it let's wait explicitly for idleness. v2: wait only in live_idle tests Signed-off-by:
-
- 07 Dec, 2023 2 commits
-
-
Tvrtko Ursulin authored
Commit 50357944 ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class") made the GSC0 engine not have a valid uabi class and so broke the engine reset counting, which in turn was made class based in cb823ed9 ("drm/i915/gt: Use intel_gt as the primary object for handling resets"). Despite the title and commit text of the latter is not mentioning it (and has left the storage array incorrectly sized), tracking by class, despite it adding aliasing in hypthotetical multi-tile systems, is handy for virtual engines which for instance do not have a valid engine->id. Therefore we keep that but just change it to use the internal class which is always valid. We also add a helper to increment the count, which aligns with the existing getter. What was broken without this fix were out of bounds reads every time a reset would happen on the GSC0 engine, or during selftests when storing and cross-checking the counts in igt_live_test_begin and igt_live_test_end. Signed-off-by:
Alan Previn Teres Alexis <alan.previn.teres.alexis@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
-
Tvrtko Ursulin authored
Engine->id namespace is per-tile so struct igt_live_test->reset_engine[] needs to be two-dimensional so engine reset counts from all tiles can be stored with no aliasing. With aliasing, if we had a real multi-tile platform, the reset counts would be incorrect for same engine instance on different tiles. Signed-off-by:
-
- 30 Nov, 2023 3 commits
-
-
John Harrison authored
There is a mechanism for reporting errors from fire and forget H2G messages. This is the only way to find out about almost any error in the GuC backend submission path. So it would be useful to know that it is working. v2: Fix some dumb over-complications and a couple of typos - review feedback from Daniele. Signed-off-by:
-
John Harrison authored
Noticed that the hangcheck selftest is submitting a non-preemptoble spinner. That means that even if the GuC does not die, the heartbeat will still kick in and trigger a reset. Which is rather defeating the purpose of the test - to verify that the heartbeat will kick in if the GuC itself has died. The test is deliberately killing the GuC, so it should never hit the case of a non-dead GuC. But it is not impossible that the kill might fail at some future point due to other driver re-work. So, make the spinner pre-emptible. That way the heartbeat can get through if the GuC is alive and context switching. Thus a reset only happens if the GuC dies. Thus, if the kill should stop working the test will now fail rather than claim to pass. Signed-off-by:
-
Zhanjun Dong authored
The gt wedged could be triggered by missing guc firmware file, HW not working, etc. Once triggered, it means all gt usage is dead, therefore we can't enable pxp under this fatal error condition. v2: Updated commit message. v3: Updated return code check. Signed-off-by:
Zhanjun Dong <zhanjun.dong@intel.com> Reviewed-by:
-
- 29 Nov, 2023 1 commit
-
-
Alan Previn authored
Debugging PXP issues can't even begin without understanding precedding sequence of important events. Add drm_dbg into the most important PXP events. v5 : - rebase. v4 : - rebase. v3 : - move gt_dbg to after mutex block in function i915_gsc_proxy_component_bind. (Vivaik) v2 : - remove __func__ since drm_dbg covers that (Jani). - add timeout dbg of the restart from front-end (Alan). Signed-off-by:Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com> Signed-off-by:
-
- 28 Nov, 2023 1 commit
-
-
Matt Roper authored
This workaround has been dropped from all DG2 variants in the latest workaround database update. Signed-off-by:
Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127190043.4099109-2-matthew.d.roper@intel.com
-
- 21 Nov, 2023 1 commit
-
-
Haridhar Kalvala authored
ATS-M device ID update. BSpec: 44477 Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231120113731.1570589-1-haridhar.kalvala@intel.com
-
- 20 Nov, 2023 5 commits
-
-
Andrzej Hajda authored
Track every intel_gt_pm_get() until its corresponding release in intel_gt_pm_put() by returning a cookie to the caller for acquire that must be passed by on released. When there is an imbalance, we can see who either tried to free a stale wakeref, or who forgot to free theirs. v2: track recently added calls in gen8_ggtt_bind_get_ce and destroyed_worker_func Signed-off-by: -
Andrzej Hajda authored
Beside reusing existing code, the main advantage of ref_tracker is tracking per instance of wakeref. It allows also to catch double put. On the other side we lose information about the first acquire and the last release, but the advantages outweigh it. Signed-off-by:
-
Tvrtko Ursulin authored
The GSC CS is not exposed to the user, so we skipped assigning a uabi class number for it. However, the trace logs use the uabi class and instance to identify the engine, so leaving uabi class unset makes the GSC CS show up as the RCS in those logs. Given that the engine is not exposed to the user, we can't add a new case in the uabi enum, so we insted internally define a kernel internal class as -1. At the same time remove special handling for the name and complete the uabi_classes array so internal class is automatically correctly assigned. Engine will show as 65535:0 other0 in the logs/traces which should be unique enough. v2: * Fix uabi class u8 vs u16 type confusion. Signed-off-by:
-
Tvrtko Ursulin authored
__rcu annotation is needed to avoid the sparse warnings such as: .../i915_drm_client.c:92:9: sparse: sparse: incompatible types in comparison expression (different address spaces): .../i915_drm_client.c:92:9: sparse: struct list_head [noderef] __rcu * .../i915_drm_client.c:92:9: sparse: struct list_head * Signed-off-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311110610.h0m6ydI5-lkp@intel.com/ Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Reviewed-by:
-
Tvrtko Ursulin authored
There is no need to return anything in the version which was merged and also the implementation of the !CONFIG_PROC_FS wasn't returning anything, causing a build failure there. Signed-off-by:
-
- 17 Nov, 2023 2 commits
-
-
Radhakrishna Sripada authored
Commit 78cc55e0 ("drm/i915/mcr: Hold GT forcewake during steering operations") introduced the workaround which was in early stages. With a valid lineage number update Workaround for future tracking. Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by:
-
Matt Roper authored
The workaround database was just updated to extend this workaround to DG2-G11 (whereas previously it applied only to G10 and G12). Signed-off-by:
-
