- 02 Sep, 2017 10 commits
-
-
Mark Rutland authored
commit 289d07a2 upstream. When there's a fatal signal pending, arm64's do_page_fault() implementation returns 0. The intent is that we'll return to the faulting userspace instruction, delivering the signal on the way. However, if we take a fatal signal during fixing up a uaccess, this results in a return to the faulting kernel instruction, which will be instantly retried, resulting in the same fault being taken forever. As the task never reaches userspace, the signal is not delivered, and the task is left unkillable. While the task is stuck in this state, it can inhibit the forward progress of the system. To avoid this, we must ensure that when a fatal signal is pending, we apply any necessary fixup for a faulting kernel instruction. Thus we will return to an error path, and it is up to that code to make forward progress towards delivering the fatal signal. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Laura Abbott <labbott@redhat.com> Reviewed-by:
Steve Capper <steve.capper@arm.com> Tested-by:
James Morse <james.morse@arm.com> Tested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
James Smart authored
commit 342b59ca upstream. When the switch is rebooted, the lpfc driver fails to log into the fabric, and Unexpected timeout message is seen. Fix: Do not issue RegVFI if the FLOGI was internally aborted. Signed-off-by:
Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by:
James Smart <james.smart@avagotech.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by:
-
Jiri Slaby authored
commit 6f175817 upstream. gcc 7 complains: drivers/net/wireless/intersil/p54/fwio.c: In function 'p54_scan': drivers/net/wireless/intersil/p54/fwio.c:491:4: warning: 'memset' used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size] Fix that by passing the correct size to memset. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Acked-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Javier González authored
commit 5389a1df upstream. The ->reserved bit is not initialized when allocated on stack. This may lead targets to misinterpret the PPA as cached. Signed-off-by:
Javier González <javier@cnexlabs.com> Signed-off-by:
Matias Bjørling <m@bjorling.me> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Martin Liska authored
commit 05384213 upstream. Starting from GCC 7.1, __gcov_exit is a new symbol expected to be implemented in a profiling runtime. [akpm@linux-foundation.org: coding-style fixes] [mliska@suse.cz: v2] Link: http://lkml.kernel.org/r/e63a3c59-0149-c97e-4084-20ca8f146b26@suse.cz Link: http://lkml.kernel.org/r/8c4084fa-3885-29fe-5fc4-0d4ca199c785@suse.czSigned-off-by:
Martin Liska <mliska@suse.cz> Acked-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Florian Meier authored
commit d02038f9 upstream. Link: http://lkml.kernel.org/r/20160701130914.GA23225@styxhpSigned-off-by:
Florian Meier <Florian.Meier@informatik.uni-erlangen.de> Reviewed-by:
-
Wolfram Sang authored
commit 27bfeb5a upstream. David reported that the length for memset was incorrect (element sizes were not taken into account). Then I saw that we are clearing kzalloced memory, so we can simply drop this code. Reported-by:
David Binderman <dcb314@hotmail.com> Reviewed-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Colin Ian King authored
commit fb75d857 upstream. duplicate const is redundant so remove it Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Takashi Iwai authored
commit 639db596 upstream. There are a few calls of memset() to stream->resources, but they all are called in a wrong size, sizeof(unsigned char) * VORTEX_RESOURCE_LAST, while this field is a u32 array. This may leave the memories not zero-cleared. Fix it by replacing them with a simpler sizeof(stream->resources) instead. Reported-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Arnd Bergmann authored
commit 5cfa2a3c upstream. I'm getting a new warning with gcc-7: isci/remote_node_context.c: In function 'sci_remote_node_context_destruct': isci/remote_node_context.c:69:16: error: array subscript is above array bounds [-Werror=array-bounds] This is odd, since we clearly cover all values for enum scis_sds_remote_node_context_states here. Anyway, checking for an array overflow can't harm and it makes the warning go away. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
- 30 Aug, 2017 30 commits
-
-
Greg Kroah-Hartman authored
-
James Morse authored
commit 7d64f82c upstream. When removing a GHES device notified by SCI, list_del_rcu() is used, ghes_remove() should call synchronize_rcu() before it goes on to call kfree(ghes), otherwise concurrent RCU readers may still hold this list entry after it has been freed. Signed-off-by:
"Huang, Ying" <ying.huang@intel.com> Fixes: 81e88fdc (ACPI, APEI, Generic Hardware Error Source POLL/IRQ/NMI notification type support) Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Joerg Roedel authored
commit e3d5092b upstream. The on-stack resource-window 'win' in setup_res() is not properly initialized. This causes the pointers in the embedded 'struct resource' to contain stale addresses. These pointers (in my case the ->child pointer) later get propagated to the global iomem_resources list, causing a #GP exception when the list is traversed in iomem_map_sanity_check(). Fixes: c183619b (x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug) Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Logan Gunthorpe authored
commit 8e8496e0 upstream. A divide by zero error occurs if qp_count is less than mw_count because num_qps_mw is calculated to be zero. The calculation appears to be incorrect. The requirement is for num_qps_mw to be set to qp_count / mw_count with any remainder divided among the earlier mws. For example, if mw_count is 5 and qp_count is 12 then mws 0 and 1 will have 3 qps per window and mws 2 through 4 will have 2 qps per window. Thus, when mw_num < qp_count % mw_count, num_qps_mw is 1 higher than when mw_num >= qp_count. Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Fixes: e26a5843 ("NTB: Split ntb_hw_intel and ntb_transport drivers") Acked-by:
Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by:
Jon Mason <jdmason@kudzu.us> Signed-off-by:
-
Logan Gunthorpe authored
commit cb827ee6 upstream. In cases where there are more mw's than spads/2-2, the mw count gets reduced to match the limitation. ntb_transport also tries to ensure that there are fewer qps than mws but uses the full mw count instead of the reduced one. When this happens, the math in 'ntb_transport_setup_qp_mw' will get confused and result in a kernel paging request bug. This patch fixes the bug by reducing qp_count to the reduced mw count instead of the full mw count. Signed-off-by:
-
Kuninori Morimoto authored
commit d7289565 upstream. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Thong Ho <thong.ho.px@rvc.renesas.com> Signed-off-by:
Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by:
-
Kuninori Morimoto authored
commit f46a93b8 upstream. Data left/right aligned is controlled by PDTA bit on SSICR. But default is left-aligned. Thus 24bit sound will be very small sound without this patch. Signed-off-by:
-
Geert Uytterhoeven authored
commit 8b27418f upstream. If the "clock-frequency" DT property is not found, req_rate is used uninitialized, and the "audio_clkout" clock will be created with an arbitrary clock rate. This uninitialized kernel stack data may leak to userspace through /sys/kernel/debug/clk/clk_summary, cfr. the value in the "rate" column: clock enable_cnt prepare_cnt rate accuracy phase -------------------------------------------------------------------- audio_clkout 0 0 4001836240 0 0 Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
-
Kuninori Morimoto authored
commit 2daf71ad upstream. Current Renesas sound driver doesn't have 1:1 relationship between stream <-> mod because it is supporting MIX. Because of this reason rsnd_mod_interrupt() is searching correspond mod by for loop. But this loop is not needed, because each mod has own type. This patch avoid pointless loop by using mod->type. This patch is good for SSI-parent support, because stream might have 2 SSI as SSI-parent/child. SSI interrupt handler will be called twice if stream has SSI-parent without this patch. Signed-off-by:
-
Kuninori Morimoto authored
commit b761bf27 upstream. Because SRC is connected to DMA and DMA want to keep dreq when stop timing. This patch makes SRC stop SRC.out only when stop timing. And it stops both SRC.out/SRC.in when quit timing Signed-off-by:
-
Aaro Koskinen authored
commit ee43a1a0 upstream. Commit e2257971 ("ASoC: simple card: set cpu-dai sysclk with mclk-fs") added sysclk / SND_SOC_CLOCK_OUT setting, that makes asoc_simple_card_hw_params fail if the operation is not supported, although the intention clearly was to ignore ENOTSUPP. Fix it. The patch fixes audio playback on Kirkwood / OpenRD client, where the following errors are seen: asoc-simple-card sound: ASoC: machine hw_params failed: -524 alsa-lib: /alsa-lib-1.0.28/src/pcm/pcm_hw.c:327:(snd_pcm_hw_hw_params) SNDRV_PCM_IOCTL_HW_PARAMS failed (-524): Unknown error 524 Fixes: e2257971 ("ASoC: simple card: set cpu-dai sysclk with mclk-fs") Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Charles Milette authored
commit f299aec6 upstream. Add support for USB Device Rosewill RNX-N150NUB. VendorID: 0x0bda, ProductID: 0xffef Signed-off-by:
Charles Milette <charles.milette@gmail.com> Signed-off-by:
-
Srinivas Pandruvada authored
commit f1664eaa upstream. It has been reported for a while that with iio-sensor-proxy service the rotation only works after one suspend/resume cycle. This required a wait in the systemd unit file to avoid race. I found a Yoga 900 where I could reproduce this. The problem scenerio is: - During sensor driver init, enable run time PM and also set a auto-suspend for 3 seconds. This result in one runtime resume. But there is a check to avoid a powerup in this sequence, but rpm is active - User space iio-sensor-proxy tries to power up the sensor. Since rpm is active it will simply return. But sensors were not actually powered up in the prior sequence, so actaully the sensors will not work - After 3 seconds the auto suspend kicks If we add a wait in systemd service file to fire iio-sensor-proxy after 3 seconds, then now everything will work as the runtime resume will actually powerup the sensor as this is a user request. To avoid this: - Remove the check to match user requested state, this will cause a brief powerup, but if the iio-sensor-proxy starts immediately it will still work as the sensors are ON. - Also move the autosuspend delay to place when user requested turn off of sensors, like after user finished raw read or buffer disable Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by:
Bastien Nocera <hadess@hadess.net> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Dragos Bogdan authored
commit fdd0d32e upstream. According to the datasheet, the range of the acceleration is [-10 g, + 10 g], so the scale factor should be 10 instead of 5. Signed-off-by:
Dragos Bogdan <dragos.bogdan@analog.com> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Martijn Coenen authored
commit b2a6d1b9 upstream. Commit c4ea41ba ("binder: use group leader instead of open thread")' was incomplete and didn't update a check in binder_mmap(), causing all mmap() calls into the binder driver to fail. Signed-off-by:
Martijn Coenen <maco@android.com> Tested-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Riley Andrews authored
commit 00b40d61 upstream. Use wake_up_interruptible_sync() to hint to the scheduler binder transactions are synchronous wakeups. Disable preemption while waking to avoid ping-ponging on the binder lock. Signed-off-by:
Todd Kjos <tkjos@google.com> Signed-off-by:
Omprakash Dhyade <odhyade@codeaurora.org> Signed-off-by:
-
Todd Kjos authored
commit c4ea41ba upstream. The binder allocator assumes that the thread that called binder_open will never die for the lifetime of that proc. That thread is normally the group_leader, however it may not be. Use the group_leader instead of current. Signed-off-by:
-
Jeffy Chen authored
commit 25717382 upstream. It looks like bnep_session has same pattern as the issue reported in old rfcomm: while (1) { set_current_state(TASK_INTERRUPTIBLE); if (condition) break; // may call might_sleep here schedule(); } __set_current_state(TASK_RUNNING); Which fixed at: dfb2fae7 Bluetooth: Fix nested sleeps So let's fix it at the same way, also follow the suggestion of: https://lwn.net/Articles/628628/Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
AL Yu-Chen Cho <acho@suse.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Jeffy Chen authored
commit f06d9773 upstream. It looks like cmtp_session has same pattern as the issue reported in old rfcomm: while (1) { set_current_state(TASK_INTERRUPTIBLE); if (condition) break; // may call might_sleep here schedule(); } __set_current_state(TASK_RUNNING); Which fixed at: dfb2fae7 Bluetooth: Fix nested sleeps So let's fix it at the same way, also follow the suggestion of: https://lwn.net/Articles/628628/Signed-off-by:
-
Jeffy Chen authored
commit 5da8e47d upstream. It looks like hidp_session_thread has same pattern as the issue reported in old rfcomm: while (1) { set_current_state(TASK_INTERRUPTIBLE); if (condition) break; // may call might_sleep here schedule(); } __set_current_state(TASK_RUNNING); Which fixed at: dfb2fae7 Bluetooth: Fix nested sleeps So let's fix it at the same way, also follow the suggestion of: https://lwn.net/Articles/628628/Signed-off-by:
Rohit Vaswani <rvaswani@nvidia.com> Signed-off-by:
-
Mark Rutland authored
commit 64aee2a9 upstream. Regardless of which events form a group, it does not make sense for the events to target different tasks and/or CPUs, as this leaves the group inconsistent and impossible to schedule. The core perf code assumes that these are consistent across (successfully intialised) groups. Core perf code only verifies this when moving SW events into a HW context. Thus, we can violate this requirement for pure SW groups and pure HW groups, unless the relevant PMU driver happens to perform this verification itself. These mismatched groups subsequently wreak havoc elsewhere. For example, we handle watchpoints as SW events, and reserve watchpoint HW on a per-CPU basis at pmu::event_init() time to ensure that any event that is initialised is guaranteed to have a slot at pmu::add() time. However, the core code only checks the group leader's cpu filter (via event_filter_match()), and can thus install follower events onto CPUs violating thier (mismatched) CPU filters, potentially installing them into a CPU without sufficient reserved slots. This can be triggered with the below test case, resulting in warnings from arch backends. #define _GNU_SOURCE #include <linux/hw_breakpoint.h> #include <linux/perf_event.h> #include <sched.h> #include <stdio.h> #include <sys/prctl.h> #include <sys/syscall.h> #include <unistd.h> static int perf_event_open(struct perf_event_attr *attr, pid_t pid, int cpu, int group_fd, unsigned long flags) { return syscall(__NR_perf_event_open, attr, pid, cpu, group_fd, flags); } char watched_char; struct perf_event_attr wp_attr = { .type = PERF_TYPE_BREAKPOINT, .bp_type = HW_BREAKPOINT_RW, .bp_addr = (unsigned long)&watched_char, .bp_len = 1, .size = sizeof(wp_attr), }; int main(int argc, char *argv[]) { int leader, ret; cpu_set_t cpus; /* * Force use of CPU0 to ensure our CPU0-bound events get scheduled. */ CPU_ZERO(&cpus); CPU_SET(0, &cpus); ret = sched_setaffinity(0, sizeof(cpus), &cpus); if (ret) { printf("Unable to set cpu affinity\n"); return 1; } /* open leader event, bound to this task, CPU0 only */ leader = perf_event_open(&wp_attr, 0, 0, -1, 0); if (leader < 0) { printf("Couldn't open leader: %d\n", leader); return 1; } /* * Open a follower event that is bound to the same task, but a * different CPU. This means that the group should never be possible to * schedule. */ ret = perf_event_open(&wp_attr, 0, 1, leader, 0); if (ret < 0) { printf("Couldn't open mismatched follower: %d\n", ret); return 1; } else { printf("Opened leader/follower with mismastched CPUs\n"); } /* * Open as many independent events as we can, all bound to the same * task, CPU0 only. */ do { ret = perf_event_open(&wp_attr, 0, 0, -1, 0); } while (ret >= 0); /* * Force enable/disble all events to trigger the erronoeous * installation of the follower event. */ printf("Opened all events. Toggling..\n"); for (;;) { prctl(PR_TASK_PERF_EVENTS_DISABLE, 0, 0, 0, 0); prctl(PR_TASK_PERF_EVENTS_ENABLE, 0, 0, 0, 0); } return 0; } Fix this by validating this requirement regardless of whether we're moving events. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Zhou Chengming <zhouchengming1@huawei.com> Link: http://lkml.kernel.org/r/1498142498-15758-1-git-send-email-mark.rutland@arm.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Chuck Lever authored
commit fc788f64 upstream. When processing an NFSv4 WRITE operation, argp->end should never point past the end of the data in the final page of the page list. Otherwise, nfsd4_decode_compound can walk into uninitialized memory. More critical, nfsd4_decode_write is failing to increment argp->pagelen when it increments argp->pagelist. This can cause later xdr decoders to assume more data is available than really is, which can cause server crashes on malformed requests. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Ronnie Sahlberg authored
commit d3edede2 upstream. Add checking for the path component length and verify it is <= the maximum that the server advertizes via FileFsAttributeInformation. With this patch cifs.ko will now return ENAMETOOLONG instead of ENOENT when users to access an overlong path. To test this, try to cd into a (non-existing) directory on a CIFS share that has a too long name: cd /mnt/aaaaaaaaaaaaaaa... and it now should show a good error message from the shell: bash: cd: /mnt/aaaaaaaaaaaaaaaa...aaaaaa: File name too long rh bz 1153996 Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Sachin Prabhu authored
commit 42bec214 upstream. The df for a SMB2 share triggers a GetInfo call for FS_FULL_SIZE_INFORMATION. The values returned are used to populate struct statfs. The problem is that none of the information returned by the call contains the total blocks available on the filesystem. Instead we use the blocks available to the user ie. quota limitation when filling out statfs.f_blocks. The information returned does contain Actual free units on the filesystem and is used to populate statfs.f_bfree. For users with quota enabled, it can lead to situations where the total free space reported is more than the total blocks on the system ending up with df reports like the following # df -h /mnt/a Filesystem Size Used Avail Use% Mounted on //192.168.22.10/a 2.5G -2.3G 2.5G - /mnt/a To fix this problem, we instead populate both statfs.f_bfree with the same value as statfs.f_bavail ie. CallerAvailableAllocationUnits. This is similar to what is done already in the code for cifs and df now reports the quota information for the user used to mount the share. # df --si /mnt/a Filesystem Size Used Avail Use% Mounted on //192.168.22.10/a 2.7G 101M 2.6G 4% /mnt/a Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
Pierguido Lambri <plambri@redhat.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 8b0db1a5 upstream. Performing the following task with kmemleak enabled: # cd /sys/kernel/tracing/events/irq/irq_handler_entry/ # echo 'enable_event:kmem:kmalloc:3 if irq >' > trigger # echo 'enable_event:kmem:kmalloc:3 if irq > 31' > trigger # echo scan > /sys/kernel/debug/kmemleak # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff8800b9290308 (size 32): comm "bash", pid 1114, jiffies 4294848451 (age 141.139s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81cef5aa>] kmemleak_alloc+0x4a/0xa0 [<ffffffff81357938>] kmem_cache_alloc_trace+0x158/0x290 [<ffffffff81261c09>] create_filter_start.constprop.28+0x99/0x940 [<ffffffff812639c9>] create_filter+0xa9/0x160 [<ffffffff81263bdc>] create_event_filter+0xc/0x10 [<ffffffff812655e5>] set_trigger_filter+0xe5/0x210 [<ffffffff812660c4>] event_enable_trigger_func+0x324/0x490 [<ffffffff812652e2>] event_trigger_write+0x1a2/0x260 [<ffffffff8138cf87>] __vfs_write+0xd7/0x380 [<ffffffff8138f421>] vfs_write+0x101/0x260 [<ffffffff8139187b>] SyS_write+0xab/0x130 [<ffffffff81cfd501>] entry_SYSCALL_64_fastpath+0x1f/0xbe [<ffffffffffffffff>] 0xffffffffffffffff The function create_filter() is passed a 'filterp' pointer that gets allocated, and if "set_str" is true, it is up to the caller to free it, even on error. The problem is that the pointer is not freed by create_filter() when set_str is false. This is a bug, and it is not up to the caller to free the filter on error if it doesn't care about the string. Link: http://lkml.kernel.org/r/1502705898-27571-2-git-send-email-chuhu@redhat.com Fixes: 38b78eb8 ("tracing: Factorize filter creation") Reported-by:
Chunyu Hu <chuhu@redhat.com> Tested-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Koji Matsuoka authored
commit fd1adef3 upstream. The VSL and HSL bits in the DSMR register set the corresponding horizontal and vertical sync signal polarity to active high. The code got it the wrong way around, fix it. Signed-off-by:
Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Koji Matsuoka authored
commit 9cdced8a upstream. There is a bug in the setting of the DES (Display Enable Signal) register. This current setting occurs 1 dot left shift. The DES register should be set minus one value about the specifying value with H/W specification. This patch corrects it. Signed-off-by:
-
Laurent Pinchart authored
commit 05ee29e9 upstream. When an encoder fails to initialize the driver prints an error message to the kernel log. The message contains the name of the encoder's DT node, which is NULL for internal encoders. Use the of_node_full_name() macro to avoid dereferencing a NULL pointer, print the output number to add more context to the error, and make sure we still own a reference to the encoder's DT node by delaying the of_node_put() call. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
-
Laurent Pinchart authored
commit 82e7c5e4 upstream. The bit is named PLLON in the datasheet, rename it. Signed-off-by:
-
Laurent Pinchart authored
commit 5e1ac3bd upstream. The frequency checks don't match the datasheet, fix them. Signed-off-by:
-
