- 03 Aug, 2018 10 commits
-
-
Takashi Iwai authored
For a sake of code simplification, remove the init and the exit entries that do nothing. Notes for readers: actually it's OK to remove *both* init and exit, but not OK to remove the exit entry. By removing only the exit while keeping init, the module becomes permanently loaded; i.e. you cannot unload it any longer! Signed-off-by:Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
For a sake of code simplification, remove the init and the exit entries that do nothing. Notes for readers: actually it's OK to remove *both* init and exit, but not OK to remove the exit entry. By removing only the exit while keeping init, the module becomes permanently loaded; i.e. you cannot unload it any longer! Signed-off-by: -
Takashi Iwai authored
For a sake of code simplification, remove the init and the exit entries that do nothing. Notes for readers: actually it's OK to remove *both* init and exit, but not OK to remove the exit entry. By removing only the exit while keeping init, the module becomes permanently loaded; i.e. you cannot unload it any longer! Signed-off-by: -
Takashi Iwai authored
For a sake of code simplification, remove the init and the exit entries that do nothing. Notes for readers: actually it's OK to remove *both* init and exit, but not OK to remove the exit entry. By removing only the exit while keeping init, the module becomes permanently loaded; i.e. you cannot unload it any longer! Signed-off-by: -
Takashi Iwai authored
For a sake of code simplification, remove the init and the exit entries that do nothing. Notes for readers: actually it's OK to remove *both* init and exit, but not OK to remove the exit entry. By removing only the exit while keeping init, the module becomes permanently loaded; i.e. you cannot unload it any longer! Signed-off-by: -
Colin Ian King authored
Trivial spelling mistake fix in debug message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115075 ("Missing break in switch") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 402016 ("Missing break in switch") Addresses-Coverity-ID: 1056542 ("Missing break in switch") Addresses-Coverity-ID: 1339579 ("Missing break in switch") Addresses-Coverity-ID: 1369526 ("Missing break in switch") Addresses-Coverity-ID: 1369529 ("Missing break in switch") Signed-off-by: -
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1165394 ("Missing break in switch") Addresses-Coverity-ID: 1167851 ("Missing break in switch") Addresses-Coverity-ID: 402015 ("Missing break in switch") Signed-off-by: -
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1468367 ("Missing break in switch") Addresses-Coverity-ID: 115037 ("Missing break in switch") Addresses-Coverity-ID: 115038 ("Missing break in switch") Signed-off-by:
-
- 02 Aug, 2018 2 commits
-
-
Takashi Iwai authored
There was a typo of COPY_USER in the dead code (that is disabled as default). Fixes: 4b83eff8 ("ALSA: sb: Convert to the new PCM ops") Signed-off-by:
-
Wei Yongjun authored
sizeof() when applied to a pointer typed expression gives the size of the pointer, not that of the pointed data. Fixes: 7edf3b5e ("ALSA: usb-audio: AudioStreaming Power Domain parsing") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
- 01 Aug, 2018 13 commits
-
-
Takashi Iwai authored
The old ugly macros remained in the code without usage. Rip them off. Signed-off-by: -
Takashi Iwai authored
All usages of mutex in ALSA sequencer core would take too long, hence we don't have to care about the user interruption that makes things complicated. Let's replace them with simpler mutex_lock(). Signed-off-by: -
Takashi Iwai authored
The sequencer core module doesn't call some destructors in the error path of the init code, which may leave some resources. This patch mainly fix these leaks by calling the destructors appropriately at alsa_seq_init(). Also the patch brings a few cleanups along with it, namely: - Expand the old "if ((err = xxx) < 0)" coding style - Get rid of empty seq_queue_init() and its caller - Change snd_seq_info_done() to void Last but not least, a couple of functions lose __exit annotation since they are called also in alsa_seq_init(). No functional changes but minor code cleanups. Signed-off-by: -
Takashi Iwai authored
There are a few functions that have been commented out for ages. And also there are functions that do nothing but placeholders. Let's kill them. Signed-off-by: -
Takashi Iwai authored
snd_midi_event_encode_byte() can never fail, and it can return rather true/false. Change the return type to bool, adjust the argument to receive a MIDI byte as unsigned char, and adjust the comment accordingly. This allows callers to drop error checks, which simplifies the code. Meanwhile, snd_midi_event_encode() helper is used only in seq_midi.c, and it can be better folded into it. This will reduce the total amount of lines in the end. Signed-off-by: -
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115084 ("Missing break in switch") Signed-off-by: -
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1357375 ("Missing break in switch") Signed-off-by: -
Colin Ian King authored
Pointer 'urb' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'urb' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Pointer 'dir' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'dir' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
The array pcm_devs is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'pcm_devs' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Variable attn is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'attn' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Pointer 'dma' is being assigned but is never used hence it is redundant and can be removed. Cleans up two clang warnings: warning: variable 'dma' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Colin Ian King authored
Variable max_streams is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'max_streams' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
- 31 Jul, 2018 4 commits
-
-
Jorge Sanjuan authored
Make use of UAC3 Power Domains associated to an Audio Streaming path within the PCM's logic. This means, when there is no audio being transferred (pcm is closed), the host will set the Power Domain associated to that substream to state D1. When audio is being transferred (from hw_params onwards), the Power Domain will be set to D0 state. This is the way the host lets the device know which Terminal is going to be actively used and it is for the device to manage its own internal resources on that UAC3 Power Domain. Note the resume method now sets the Power Domain to D1 state as resuming the device doesn't mean audio streaming will occur. Signed-off-by:
Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by:
-
Jorge Sanjuan authored
Set the UAC3 Power Domain state for an Audio Streaming interface to D2 state before suspending the device (usb_driver callback). This lets the device know there is no intention to use any of the Units in the Audio Function and that the host is not going to even listen for wake-up events (interrupts) on the units. When the usb_driver gets resumed, the state D0 (fully powered) will be set. This ties up the UAC3 Power Domains to the runtime PM. Signed-off-by:
-
Jorge Sanjuan authored
Power Domains in the UAC3 spec are mainly intended to be associated to an Input or Output Terminal so the host changes the power state of the entire capture or playback path within the topology. This patch adds support for finding Power Domains associated to an Audio Streaming Interface (bTerminalLink) and adds a reference to them in the usb audio substreams (snd_usb_substream). Signed-off-by:
-
Jorge Sanjuan authored
Thee USB Audio Class 3 (UAC3) introduces Power Domains as a new feature to let a host turn individual parts of an audio function to different power states via USB requests. This lets the device get to know a bit amore about what the host is up to in order to optimize power consumption efficiently. The Power Domains are optional for UAC3 configuration but all UAC3 devices shall include at least one BADD configuration where the support for Power Domains is compulsory. This patch adds a set of features/helpers to parse these power domains and change their status. Signed-off-by:
-
- 30 Jul, 2018 2 commits
-
-
Takashi Iwai authored
The trigger flag in vmidi object can be referred in different contexts concurrently, hence it's better to be put with READ_ONCE() and WRITE_ONCE() macros to assure the accesses. Signed-off-by: -
Takashi Iwai authored
The virmidi sequencer stuff tries to translate the rawmidi bytes to sequencer events and deliver the packets at trigger callback. The amount of the whole process of these translations and deliveries depends on the incoming rawmidi bytes, and we have no limit for that; this was the cause of a CPU soft lockup that had been reported and fixed recently. Although we've fixed the soft lockup by putting the temporary unlock and cond_resched(), it's rather a quick band aid. In this patch, meanwhile, the event parsing and delivery process is offloaded to a dedicated work, and the trigger callback just kicks it off. It has three merits, at least: - The processing is always done in a sleepable context, which can assure the event delivery with non-atomic flag without hackish is_atomic() usage. - Other relevant codes can be simplified, reducing the lines - It makes me happier Signed-off-by:
-
- 29 Jul, 2018 2 commits
-
-
Takashi Iwai authored
Pull the latest ALSA sequencer fixes for the further development of virmidi. Signed-off-by: -
Takashi Iwai authored
Instead of calling mutex_unlock() at each error path multiple times, take the standard goto-and-a-single-unlock approach. This will simplify the code and make easier to find the unbalanced mutex locks. No functional changes, but only the code readability improvement as a preliminary work for further changes. Signed-off-by:
-
- 28 Jul, 2018 2 commits
-
-
Park Ju Hyung authored
On rare occasions, we are still noticing that the internal speaker spitting out spurious noises even after adding the problematic codec to the list. Adding a 10ms artificial delay before rebooting fixes the issue entirely. Patch for Realtek codecs also adds the same amount of delay after entering D3. Signed-off-by:
Park Ju Hyung <qkrwngud825@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Park Ju Hyung authored
As an equivalent codec with CX20724, CX8200 is also subject to the reboot bug. Late 2017 and 2018 LG Gram and some HP Spectre laptops are known victims to this issue, causing extremely loud noises upon reboot. Now that we know that this bug is subject to multiple codecs, fix the comment as well. Signed-off-by:
-
- 27 Jul, 2018 5 commits
-
-
Jia-Ju Bai authored
hw_pll_init(), hw_dac_stop(), hw_dac_start() and hw_adc_init() are never called in atomic context. They call mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Jia-Ju Bai authored
hw_pll_init(), hw_reset_dac() and hw_card_init() are never called in atomic context. They calls mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
-
Jia-Ju Bai authored
snd_usb_select_mode_quirk(), snd_usb_set_interface_quirk() and snd_usb_ctl_msg_quirk() are never called in atomic context. They call mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep() and usleep_range(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
-
Takashi Iwai authored
The data types defined in SB CSP driver code are all in little-endian, hence the proper type like __le32 should be used. Spotted by sparse, a warning like: sound/isa/sb/sb16_csp.c:330:14: warning: cast to restricted __le32 Signed-off-by: -
Takashi Iwai authored
The DMA address table in atiixp modem driver is in little-endian, hence we should define it with __le32 properly. Spotted by sparse, a warning like: sound/pci/atiixp_modem.c:360:28: warning: incorrect type in assignment (different base types) Signed-off-by:
-
