- 13 Oct, 2014 40 commits
-
-
Srinivas Pandruvada authored
commit b07e3b38 upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Srinivas Pandruvada authored
commit 0b4dce2e upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by:
-
Srinivas Pandruvada authored
commit 55a6f9dd upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by:
-
Srinivas Pandruvada authored
commit 0668a4e4 upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by:
-
Srinivas Pandruvada authored
commit f1535665 upstream. Instead of a void function, return the trigger pointer. Whilst not in of itself a fix, this makes the following set of 7 fixes cleaner than they would otherwise be. Signed-off-by:
-
Srinivas Pandruvada authored
commit ec7f68e0 upstream. We can't store the trigger instance created by iio_trigger_alloc, in trig field of iio_device structure. This needs to be stored in the driver private data. Othewise it can result in crash during module unload. Hence created a trig_ptr in the common data structure for each HID sensor IIO driver and storing here. Signed-off-by:
-
Peter Ujfalusi authored
commit fe0a29e1 upstream. In case of capture we should not use rotation. The reverse and mask is enough to get the data align correctly from the bus to MCU: Format data from bus after reverse (XRBUF) S16_LE: |LSB|MSB|xxx|xxx| |xxx|xxx|MSB|LSB| S24_3LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| S24_LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| S32_LE: |LSB|DAT|DAT|MSB| |MSB|DAT|DAT|LSB| With this patch all supported formats will work for playback and capture. Reported-by: Jyri Sarha <jsarha@ti.com> (broken S24_3LE capture) Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Miklos Szeredi authored
commit b928095b upstream. If overwriting an empty directory with rename, then need to drop the extra nlink. Test prog: #include <stdio.h> #include <fcntl.h> #include <err.h> #include <sys/stat.h> int main(void) { const char *test_dir1 = "test-dir1"; const char *test_dir2 = "test-dir2"; int res; int fd; struct stat statbuf; res = mkdir(test_dir1, 0777); if (res == -1) err(1, "mkdir(\"%s\")", test_dir1); res = mkdir(test_dir2, 0777); if (res == -1) err(1, "mkdir(\"%s\")", test_dir2); fd = open(test_dir2, O_RDONLY); if (fd == -1) err(1, "open(\"%s\")", test_dir2); res = rename(test_dir1, test_dir2); if (res == -1) err(1, "rename(\"%s\", \"%s\")", test_dir1, test_dir2); res = fstat(fd, &statbuf); if (res == -1) err(1, "fstat(%i)", fd); if (statbuf.st_nlink != 0) { fprintf(stderr, "nlink is %lu, should be 0\n", statbuf.st_nlink); return 1; } return 0; } Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Ross Lagerwall authored
commit 61a734d3 upstream. Always freeze processes when suspending and thaw processes when resuming to prevent a race noticeable with HVM guests. This prevents a deadlock where the khubd kthread (which is designed to be freezable) acquires a usb device lock and then tries to allocate memory which requires the disk which hasn't been resumed yet. Meanwhile, the xenwatch thread deadlocks waiting for the usb device lock. Freezing processes fixes this because the khubd thread is only thawed after the xenwatch thread finishes resuming all the devices. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Christian Borntraeger authored
commit ab3f285f upstream. The PFMF instruction handler blindly wrote the storage key even if the page was mapped R/O in the host. Lets try a COW before continuing and bail out in case of errors. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by:
-
Mark Brown authored
commit 5c1ebe7f upstream. If the device can't support block writes then don't attempt to use raw syncing which will automatically generate block writes for adjacent registers, use the existing _single() block syncing implementation. Reported-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Mark Brown authored
commit 5844a8b9 upstream. A previous over-zealous factorisation of code means that we only treat registers as volatile if they are readable. For most devices this is fine since normally most registers can be read and volatility implies readability but for format_write() devices where there is no readback from the hardware and we use volatility to mean simply uncacheability this means that we end up treating all registers as cacheble. A bigger refactoring of the code to clarify this is in order but as a fix make a minimal change and only check readability when checking volatility if there is no format_write() operation defined for the device. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Markos Chandras authored
commit 8a574cfa upstream. Every mcount() call in the MIPS 32-bit kernel is done as follows: [...] move at, ra jal _mcount addiu sp, sp, -8 [...] but upon returning from the mcount() function, the stack pointer is not adjusted properly. This is explained in details in 58b69401 (MIPS: Function tracer: Fix broken function tracing). Commit ad8c3969 ("MIPS: Unbreak function tracer for 64-bit kernel.) fixed the stack manipulation for 64-bit but it didn't fix it completely for MIPS32. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7792/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Aurelien Jarno authored
commit 29593fd5 upstream. Commit dc4d7b37 (MIPS: ZBOOT: gather string functions into string.c) moved the string related functions into a separate file, which might cause the following build error, depending on the configuration: | CC arch/mips/boot/compressed/decompress.o | In file included from linux/arch/mips/boot/compressed/../../../../lib/decompress_unxz.c:234:0, | from linux/arch/mips/boot/compressed/decompress.c:67: | linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'fill_temp': | linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c:162:2: error: implicit declaration of function 'memcpy' [-Werror=implicit-function-declaration] | cc1: some warnings being treated as errors | linux/scripts/Makefile.build:308: recipe for target 'arch/mips/boot/compressed/decompress.o' failed | make[6]: *** [arch/mips/boot/compressed/decompress.o] Error 1 | linux/arch/mips/Makefile:308: recipe for target 'vmlinuz' failed It does not fail with the standard configuration, as when CONFIG_DYNAMIC_DEBUG is not enabled <linux/string.h> gets included in include/linux/dynamic_debug.h. There might be other ways for it to get indirectly included. We can't add the include directly in xz_dec_stream.c as some architectures might want to use a different version for the boot/ directory (see for example arch/x86/boot/string.h). Signed-off-by:
Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7420/Signed-off-by:
-
Robin Murphy authored
commit 5ca918e5 upstream. The alignment fixup incorrectly decodes faulting ARM VLDn/VSTn instructions (where the optional alignment hint is given but incorrect) as LDR/STR, leading to register corruption. Detect these and correctly treat them as unhandled, so that userspace gets the fault it expects. Reported-by:
Simon Hosie <simon.hosie@arm.com> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Nathan Lynch authored
commit fbfb872f upstream. The TPIDRURO and TPIDRURW registers need to be flushed during exec; otherwise TLS information is potentially leaked. TPIDRURO in particular needs careful treatment. Since flush_thread basically needs the same code used to set the TLS in arm_syscall, pull that into a common set_tls helper in tls.h and use it in both places. Similarly, TEEHBR needs to be cleared during exec as well. Clearing its save slot in thread_info isn't right as there is no guarantee that a thread switch will occur before the new program runs. Just setting the register directly is sufficient. Signed-off-by:
Nathan Lynch <nathan_lynch@mentor.com> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Sudeep Holla authored
commit a040803a upstream. Since commit 1dbfa187 ("ARM: irq migration: force migration off CPU going down") the ARM interrupt migration code on cpu offline calls irqchip.irq_set_affinity() with the argument force=true. At the point of this change the argument had no effect because it was not used by any interrupt chip driver and there was no semantics defined. This changed with commit 01f8fa4f ("genirq: Allow forcing cpu affinity of interrupts") which made the force argument useful to route interrupts to not yet online cpus without checking the target cpu against the cpu online mask. The following commit ffde1de6 ("irqchip: gic: Support forced affinity setting") implemented this for the GIC interrupt controller. As a consequence the ARM cpu offline irq migration fails if CPU0 is offlined, because CPU0 is still set in the affinity mask and the validataion against cpu online mask is skipped to the force argument being true. The following first_cpu(mask) selection always selects CPU0 as the target. Solve the issue by calling irq_set_affinity() with force=false from the CPU offline irq migration code so the GIC driver validates the affinity mask against CPU online mask and therefore removes CPU0 from the possible target candidates. Tested on TC2 hotpluging CPU0 in and out. Without this patch the system locks up as the IRQs are not migrated away from CPU0. Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Mark Rutland authored
commit 85868313 upstream. The ARMv6 and ARMv7 early abort handlers clear the exclusive monitors upon entry to the kernel, but this is redundant: - We clear the monitors on every exception return since commit 200b812d ("Clear the exclusive monitor when returning from an exception"), so this is not necessary to ensure the monitors are cleared before returning from a fault handler. - Any dummy STREX will target a temporary scratch area in memory, and may succeed or fail without corrupting useful data. Its status value will not be used. - Any other STREX in the kernel must be preceded by an LDREX, which will initialise the monitors consistently and will not depend on the earlier state of the monitors. Therefore we have no reason to care about the initial state of the exclusive monitors when a data abort is taken, and clearing the monitors prior to exception return (as we already do) is sufficient. This patch removes the redundant clearing of the exclusive monitors from the early abort handlers. Signed-off-by:
-
Jorge A. Ventura authored
commit 3d0763c0 upstream. The spi hangs waiting the completion of omap2_mcspi_rx_callback. Signed-off-by:
Jorge A. Ventura <jorge.araujo.ventura@gmail.com> Signed-off-by:
-
Trond Myklebust authored
commit cd9288ff upstream. James Drew reports another bug whereby the NFS client is now sending an OPEN_DOWNGRADE in a situation where it should really have sent a CLOSE: the client is opening the file for O_RDWR, but then trying to do a downgrade to O_RDONLY, which is not allowed by the NFSv4 spec. Reported-by:
James Drews <drews@engr.wisc.edu> Link: http://lkml.kernel.org/r/541AD7E5.8020409@engr.wisc.edu Fixes: aee7af35 (NFSv4: Fix problems with close in the presence...) Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Steve Dickson authored
commit 080af20c upstream. There is a race between nfs4_state_manager() and nfs_server_remove_lists() that happens during a nfsv3 mount. The v3 mount notices there is already a supper block so nfs_server_remove_lists() called which uses the nfs_client_lock spin lock to synchronize access to the client list. At the same time nfs4_state_manager() is running through the client list looking for work to do, using the same lock. When nfs4_state_manager() wins the race to the list, a v3 client pointer is found and not ignored properly which causes the panic. Moving some protocol checks before the state checking avoids the panic. Signed-off-by:
Steve Dickson <steved@redhat.com> Signed-off-by:
-
Olav Haugan authored
commit 1fc870c7 upstream. Stage-1 context banks do not have the SMMU_CBn_TCR[SL0] field since it is only applicable to stage-2 context banks. This patch ensures that we don't set the reserved TCR bits for stage-1 translations. Signed-off-by:
Olav Haugan <ohaugan@codeaurora.org> Signed-off-by:
-
Lee, Chun-Yi authored
commit 9389f46e upstream. The value64 parameter is an u64 point that used to transfer the value for write to CMOS, or used to return the value that's read from CMOS. The value64 is an u64 point, so don't need get address again. It causes acpi_cmos_rtc_space_handler always return 0 to reader and didn't write expected value to CMOS. Signed-off-by:
Lee, Chun-Yi <jlee@suse.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Felipe Balbi authored
commit 81a60b7f upstream. we don't to gate clocks until our children are done with their remove path. Fixes: af310e96 (usb: dwc3: omap: use runtime API's to enable clocks) Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Alan Stern authored
commit 7312b5dd upstream. Old code in ehci-hcd tries to expedite disabling endpoints after the controller has stopped, by destroying the endpoint's associated QH without first unlinking the QH. This was necessary back when the driver wasn't so careful about keeping track of the controller's state. But now we are careful about it, and the driver knows that when the controller isn't running, no unlinking delay is needed. Furthermore, skipping the unlink step will trigger a BUG() in qh_destroy() when the preceding QH is released, because the link pointer will be non-NULL. Removing the lines that skip the unlinking step and go directly to QH_STATE_IDLE fixes the problem. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Joe Lawrence <joe.lawrence@stratus.com> Tested-by:
-
Mark authored
commit c80b4495 upstream. This patch adds quirks for Entrega Technologies (later Xircom PortGear) USB- SCSI converters. They use Shuttle Technology EUSB-01/EUSB-S1 chips. The US_FL_SCM_MULT_TARG quirk is needed to allow multiple devices on the SCSI chain to be accessed. Without it only the (single) device with SCSI ID 0 can be used. The standalone converter sold by Entrega had model number U1-SC25. Xircom acquired Entrega and re-branded the product line PortGear. The PortGear USB to SCSI Converter (model PGSCSI) is internally identical to the Entrega product, but later models may use a different USB ID. The Entrega-branded units have USB ID 1645:0007, as does my Xircom PGSCSI, but the Windows and Macintosh drivers also support 085A:0028. Entrega also sold the "Mac USB Dock", which provides two USB ports, a Mac (8-pin mini-DIN) serial port and a SCSI port. It appears to the computer as a four-port hub, USB-serial, and USB-SCSI converters. The USB-SCSI part may have initially used the same ID as the standalone U1-SC25 (1645:0007), but later production used 085A:0026. My Xircom PortGear PGSCSI has bcdDevice=0x0100. Units with bcdDevice=0x0133 probably also exist. This patch adds quirks for 1645:0007, 085A:0026 and 085A:0028. The Windows driver INF file also mentions 085A:0032 "PortStation SCSI Module", but I couldn't find any mention of that actually existing in the wild; perhaps it was cancelled before release? Signed-off-by:
Mark Knibbs <markk@clara.co.uk> Signed-off-by:
-
Mark authored
commit b6a3ed67 upstream. Hi, The Ariston Technologies iConnect 025 and iConnect 050 (also known as e.g. iSCSI-50) are SCSI-USB converters which use Shuttle Technology/SCM Microsystems chips. Only the connectors differ; both have the same USB ID. The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other than 0. I don't have one of these, but based on the other entries for Shuttle/ SCM-based converters this patch is very likely correct. I used 0x0000 and 0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which bcdDevice value the products use. Signed-off-by:
-
Mark authored
commit 67d365a5 upstream. The Adaptec USBConnect 2000 is another SCSI-USB converter which uses Shuttle Technology/SCM Microsystems chips. The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other than 0. I don't have a USBConnect 2000, but based on the other entries for Shuttle/ SCM-based converters this patch is very likely correct. I used 0x0000 and 0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which bcdDevice value the product uses. Signed-off-by:
-
Mark authored
commit c66f1c62 upstream. The Iomega Jaz USB Adapter is a SCSI-USB converter cable. The hardware seems to be identical to e.g. the Microtech XpressSCSI, using a Shuttle/ SCM chip set. However its firmware restricts it to only work with Jaz drives. On connecting the cable a message like this appears four times in the log: reset full speed USB device number 4 using uhci_hcd That's non-fatal but the US_FL_SINGLE_LUN quirk fixes it. Signed-off-by:
-
Joe Lawrence authored
commit c605f3cd upstream. During surprise device hotplug removal tests, it was observed that hub_events may try to call usb_lock_device on a device that has already been freed. Protect the usb_device by taking out a reference (under the hub_event_lock) when hub_events pulls it off the list, returning the reference after hub_events is finished using it. Signed-off-by:
-
Mathias Nyman authored
commit 96044694 upstream. Resuming from hibernate (S4) will restart and re-initialize xHC. The device contexts are freed and will be re-allocated later during device reset. Usb core will disable link pm in device resume before device reset, which will try to change the max exit latency, accessing the device contexts before they are re-allocated. There is no need to zero (disable) the max exit latency when disabling hw lpm for a freshly re-initialized xHC. So check that device context exists before doing anything. The max exit latency will be set again after device reset when usb core enables the link pm. Reported-by:
Imre Deak <imre.deak@intel.com> Tested-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit c207e7c5 upstream. If xhci initialization fails before the roothub bandwidth domains (xhci->rh_bw[i]) are allocated it will oops when trying to access rh_bw members in xhci_mem_cleanup(). Reported-by:
Manuel Reimer <manuel.reimer@gmx.de> Signed-off-by:
-
Felipe Balbi authored
commit 96908589 upstream. Commit 71c731a2 (usb: host: xhci: Fix Compliance Mode on SN65LVP3502CP Hardware) implemented a workaround for a known issue with Texas Instruments' USB 3.0 redriver IC but it left a condition where any xHCI host would be taken out of reset if port was placed in compliance mode and there was no device connected to the port. That condition would trigger a fake connection to a non-existent device so that usbcore would trigger a warm reset of the port, thus taking the link out of reset. This has the side-effect of preventing any xHCI host connected to a Linux machine from starting and running the USB 3.0 Electrical Compliance Suite because the port will mysteriously taken out of compliance mode and, thus, xHCI won't step through the necessary compliance patterns for link validation. This patch fixes the issue by just adding a missing check for XHCI_COMP_MODE_QUIRK inside xhci_hub_report_usb3_link_state() when PORT_CAS isn't set. This patch should be backported to all kernels containing commit 71c731a2. Fixes: 71c731a2 (usb: host: xhci: Fix Compliance Mode on SN65LVP3502CP Hardware) Cc: Alexis R. Cortes <alexis.cortes@ti.com> Signed-off-by:
-
Thomas Pugliese authored
commit 675f0ab2 upstream. Make sure the uwb_dev->bce entry is set before calling uwb_dev_add in uwbd_dev_onair so that usermode will only see the device after it is properly initialized. This fixes a kernel panic that can occur if usermode tries to access the IEs sysfs attribute of a UWB device before the driver has had a chance to set the beacon cache entry. Signed-off-by:
Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit ee444609 upstream. Add device id for NOVITUS Bono E thermal printer. Reported-by:
Emanuel Koczwara <poczta@emanuelkoczwara.pl> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Taylor Braun-Jones authored
commit 9c491c37 upstream. Signed-off-by:
Taylor Braun-Jones <taylor.braun-jones@ge.com> Cc: Johan Hovold <johan@kernel.org> Signed-off-by:
-
Ivan T. Ivanov authored
commit 233c7daf upstream. Initialize USB PHY after every Link controller reset Cc: Tim Bird <tbird20d@gmail.com> Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by:
-
Ivan T. Ivanov authored
commit ea290056 upstream. PHY drivers keep track of the current state of the hardware, so don't change PHY settings under it. Cc: Tim Bird <tbird20d@gmail.com> Signed-off-by:
-
Thierry Reding authored
commit 9ce9ec95 upstream. The PHY configuration is stored in an opaque "config" field, but when allocating the structure, its proper size needs to be known. In the case of UTMI, the proper structure is tegra_utmip_config of which a local variable already exists, so we can use that to obtain the size from. Fixes the following warning from the sparse checker: drivers/usb/phy/phy-tegra-usb.c:882:17: warning: expression using sizeof(void) Fixes: 81d5dfe6 (usb: phy: tegra: Read UTMIP parameters from device tree) Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Bjørn Mork authored
commit 5b3da692 upstream. This VID:PID is used for some Direct IP devices behaving identical to the already supported 0F3D:68AA devices. Reported-by:
Lars Melin <larsm17@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
