Move the checking for HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT for AUX area mmaps
until after checking if such mmaps are used anyway.
Reported-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/55A5023C.7020907@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fix from Arnaldo Carvalho de Melo:

  - Fix 'perf report' and 'perf top' handling of the '--dsos DSO-LIST',
    '--comms COMM-LIST' and '--symbols SYM-LIST' command line options,
    that were segfaulting due to not considering those lists as filters
    in the hists browser TUI code. (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

At some point:

  commit 2c86c7ca
  Author: Namhyung Kim <namhyung@kernel.org>
  Date:   Mon Mar 17 18:18:54 2014 -0300

    perf report: Merge al->filtered with hist_entry->filtered

We stopped dropping samples for things filtered via the --comms, --dsos,
--symbols, etc, i.e. things marked as filtered in the symbol resolution
routines (thread__find_addr_map(), perf_event__preprocess_sample(),
etc).

But then, in:

  commit 268397cb
  Author: Namhyung Kim <namhyung@kernel.org>
  Date:   Tue Apr 22 14:49:31 2014 +0900

    perf top/tui: Update nr_entries properly after a filter is applied

We don't take into account entries that were filtered in
perf_event__preprocess_sample() and friends, which leads to
inconsistency in the browser seek routines, that expects the number of
hist_entry->filtered entries to match what it thinks is the number of
unfiltered, browsable entries.

So, for instance, when we do:

  perf top --symbols ___non_existent_symbol___

the hist_browser__nr_entries() routine thinks there are no filters in
place, uses the hists->nr_entries but all entries are filtered, leading
to a segfault.

Tested with:

   perf top --symbols malloc,free --percentage=relative

Freezing, by pressing 'f', at any time and doing the math on the
percentages ends up with 100%, ditto for:

   perf top --dsos libpthread-2.20.so,libxul.so --percentage=relative

Both were segfaulting, all fixed now.

More work needed to do away with checking if filters are in place, we
should just use the nr_non_filtered_samples counter, no need to
conditionally use it or hists.nr_filter, as what the browser does is
just show unfiltered stuff. An audit of how it is being accounted is
needed, this is the minimal fix.
Reported-by: Michael Petlan <mpetlan@redhat.com>
Fixes: 268397cb ("perf top/tui: Update nr_entries properly after a filter is applied")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6w01d5q97qk0d64kuojme5in@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When setting yup the symbols library we setup several filter lists,
for dsos, comms, symbols, etc, and there is code that, if there are
filters, do certain operations, like recalculate the number of non
filtered histogram entries in the top/report TUI.

But they were considering just the "Zoom" filters, when they need to
take into account as well the above mentioned filters (perf top --comms,
--dsos, etc).

So store in symbol_conf.has_filter true if any of those filters is in
place.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-f5edfmhq69vfvs1kmikq1wep@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Mikulas reported his K6-3 not booting. This is because the
static_key API confusion struck and bit Andy, this wants to be
static_key_false().
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Vince Weaver <vince@deater.net>
Cc: hillf.zj <hillf.zj@alibaba-inc.com>
Fixes: a6673429 ("perf/x86: Add /sys/devices/cpu/rdpmc=2 to allow rdpmc for all tasks")
Link: http://lkml.kernel.org/r/20150709172338.GC19282@twins.programming.kicks-ass.netSigned-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-urgent-for-mingo-2' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

  - Fix 'perf top -u username', where not enough memory per thread_map
    entry was being allocated nor was being initialized, causing a
    segfault (Arnaldo Carvalho de Melo)

  - Fix locking lockup using 32-bit compat vdso (Adrian Hunter)

  - Fix shadow declaration of 'close' with older build environments (Jiri Olsa)

  - Make the 'clean' target do a better job, removing some more temp files (Riku Voipio)

  - The python binding also has a MANIFEST like file where we list the files that
    need to be built and linked to form the resulting python shared object module
    file. And it has an entry for rbtree.c that still pointed to the one in the
    kernel sources, fix it by also removing one level of indirection so that it
    uses the tools/lib/rbtree.c copy. (Arnaldo Carvalho de Melo)

  - For the same reasons as for rbtree.c, copy the kernel lib/hweight.c file to
    tools/lib/, sanitizing it in the process to remove kernel specific stuff like
    EXPORT_SYMBOL() lines and the linux/export.h include reference, as that file
    doesn't exist anymore in tools/include/linux. (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge hpfs updates from Mikulas Patocka.

Mainly fstrim support, with some minor other cleanups.

These were actually sent during the merge window, but I wanted to wait
for the FSTRIM compat handling cleanup before applying them.  Mikulas
sent that earlier today.

* emailed patches from Mikulas Patocka <mikulas@twibright.com>:
  hpfs: hpfs_error: Remove static buffer, use vsprintf extension %pV instead
  hpfs: kstrdup() out of memory handling
  hpfs: Remove unessary cast
  hpfs: add fstrim support

Removing unnecessary static buffers is good.
Use the vsprintf %pV extension instead.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mikulas Patocka <mikulas@twibright.com>
Cc: stable@vger.kernel.org      # v2.6.36+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is a possibility of nothing being allocated to the new_opts in
case of memory pressure, therefore return ENOMEM for such case.
Signed-off-by: Sanidhya Kashyap <sanidhya.gatech@gmail.com>
Signed-off-by: Mikulas Patocka <mikulas@twibright.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Avoid a pointless kmem_cache_alloc() return value cast in
fs/hpfs/super.c::hpfs_alloc_inode()
Signed-off-by: Firo Yang <firogm@gmail.com>
Signed-off-by: Mikulas Patocka <mikulas@twibright.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch adds support for fstrim to the HPFS filesystem.
Signed-off-by: Mikulas Patocka <mikulas@twibright.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull Ceph fixes from Sage Weil:
 "There is a fix for CephFS and RBD when used within containers/namespaces,
   and a fix for the address learning the client is supposed to do when
  initially talking to the Ceph cluster.

  There are also two patches updating MAINTAINERS.  One breaks out the
  common Ceph code shared by fs/ceph and drivers/block/rbd.c into a
  separate entry with the appropriate maintainers listed.  The second
  adds a second reference to the github tree where the Ceph client
  development takes place (before it is pushed to korg and then to you).

  The goal here is to move closer to a situation where Ilya Dryomov or
  one of the other maintainers can push things to you if I am
  unavailable.  Ilya has done most of the work preparing branches for
  upstream recently; you should not be surprised to hear from him if I
  am trapped in some internet-less wasteland or hit by a bus or
  something.  In the meantime, we'll work on getting him added to the
  kernel web of trust"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  MAINTAINERS: add secondary tree for ceph modules
  MAINTAINERS: update ceph entries
  libceph: treat sockaddr_storage with uninitialized family as blank
  libceph: enable ceph in a non-default network namespace

Instead of accessing it directly, as it uses EXPORT_SYMBOL, that has
no meaning in tools/perf and because we removed the stubs for it, i.e.
we removed the tools/include/linux/export.h file.

This fixes the build for the detached tarball sources cases and removes
one more source of entanglement with the kernel sources.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-oyqx541o7apa2cskjhcxi6nx@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The python binding build process was still looking at the kernel
rbtree.c file, so, when doing a in-tree build it would work, but when
creating a tarball using tools/perf/MANIFEST as the contents list and
then trying to build the resulting detached sources, it failed.

Fix it by removing one level of indirection from rbtree.c in the
tools/perf/util/python-ext-sources file.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8u83c2k5guyhxdlkaaqis8k4@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The FITRIM ioctl has the same arguments on 32-bit and 64-bit
architectures, so we can add it to the list of compatible ioctls and
drop it from compat_ioctl method of various filesystems.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ted Ts'o <tytso@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The firmware class uevent function accessed the "fw_priv->buf" buffer
without the proper locking and testing for NULL.  This is an old bug
(looks like it goes back to 2012 and commit 1244691c: "firmware
loader: introduce firmware_buf"), but for some reason it's triggering
only now in 4.2-rc1.

Shuah Khan is trying to bisect what it is that causes this to trigger
more easily, but in the meantime let's just fix the bug since others are
hitting it too (at least Ingo reports having seen it as well).
Reported-and-tested-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Ming Lei <ming.lei@canonical.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Reading page fault handler code I've noticed that under right
circumstances kernel would map anonymous pages into file mappings: if
the VMA doesn't have vm_ops->fault() and the VMA wasn't fully populated
on ->mmap(), kernel would handle page fault to not populated pte with
do_anonymous_page().

Let's change page fault handler to use do_anonymous_page() only on
anonymous VMA (->vm_ops == NULL) and make sure that the VMA is not
shared.

For file mappings without vm_ops->fault() or shred VMA without vm_ops,
page fault on pte_none() entry would lead to SIGBUS.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Willy Tarreau <w@1wt.eu>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The Ceph kernel code is primarily developed in the github tree, and only
pushed to the korg tree before going to Linus.  If Sage is unavailable and
another maintainer needs to push something upstream, pull requests may
originate from the github tree instead of Sage's korg tree.
Signed-off-by: Sage Weil <sage@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

- The Ceph common code is used by both fs/ceph and drivers/block/rbd.
  Add a separate maintainers entry.

- Add Ilya as libceph maintainer and cephfs submaintainer.

- Attribute Documentation/ABI/testing/sysfs-bus-rbd to rbd.

- ceph-devel@vger.kernel.org should be L, not M in rbd entry.
Signed-off-by: Sage Weil <sage@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

addr_is_blank() should return true if family is neither AF_INET nor
AF_INET6.  This is what its counterpart entity_addr_t::is_blank_ip() is
doing and it is the right thing to do: in process_banner() we check if
our address is blank and if it is "learn" it from our peer.  As it is,
we never learn our address and always send out a blank one.  This goes
way back to ceph.git commit dd732cbfc1c9 ("use sockaddr_storage; and
some ipv6 support groundwork") from 2009.

While at at, do not open-code ipv6_addr_any() and use INADDR_ANY
constant instead of 0.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>

Grab a reference on a network namespace of the 'rbd map' (in case of
rbd) or 'mount' (in case of ceph) process and use that to open sockets
instead of always using init_net and bailing if network namespace is
anything but init_net.  Be careful to not share struct ceph_client
instances between different namespaces and don't add any code in the
!CONFIG_NET_NS case.

This is based on a patch from Hong Zhiguo <zhiguohong@tencent.com>.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>

When we started adding extra stuff per array entry, growing the size of
those entries to more than sizeof(pid_t), we had to convert those sizeof
operations to the more robust sizeof(map->map[0]) idiom, that is future
proof, i.e. if/when we add more stuff to those entries, that expression
will produce the new per-entry size.

And besides that, we need to zero out those extra fields, that sometimes
may not get filled, like when we couldn't care less about the comms,
since we don't need those, but since we will try freeing it at
thread_map__delete(), we better fix it.

That is why a thread_map__realloc() was provided.

But that method wasn't used in thread_map__new_by_uid(), fix it.
Reported-by: Ingo Molnar <mingo@kernel.org>
Fixes: 792402fd ("perf thrad_map: Add comm string into array")
Fixes: 9d7e8c3a ("perf tools: Add thread_map__(alloc|realloc) helpers")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6a0swlm6m8lnu3wpjv284hkb@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull power management and ACPI updates from Rafael Wysocki:
 "These are fixes on top of the previous PM+ACPI pull requests
  (including one fix for a 4.1 regression) and two commits adding
  _CLS-based device enumeration support to the ACPI core and the ATA
  subsystem that waited for the latest ACPICA changes to be merged.

  Specifics:

   - Fix for an ACPI resources management regression introduced during
     the 4.1 cycle (that unfortunately went into -stable) effectively
     reverting the bad commit along with the recent fixups on top of it
     and using an alternative approach to address the underlying issue
     (Rafael J Wysocki).

   - Fix for a memory leak and an incorrect return value in an error
     code path in the ACPI LPSS (Low-Power Subsystem) driver (Rafael J
     Wysocki).

   - Fix for a leftover dangling pointer in an error code path in the
     new wakeup IRQ support code (Rafael J Wysocki).

   - Fix to prevent infinite loops (due to errors in other places) from
     happening in the core generic PM domains support code (Geert
     Uytterhoeven).

   - Hibernation documentation update/clarification (Uwe Geuder).

   - Support for _CLS-based device enumeration in the ACPI core and in
     the ATA subsystem (Suravee Suthikulpanit)"

* tag 'pm+acpi-4.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / wakeirq: Avoid setting power.wakeirq too hastily
  ata: ahci_platform: Add ACPI _CLS matching
  ACPI / scan: Add support for ACPI _CLS device matching
  PM / hibernate: clarify resume documentation
  PM / Domains: Avoid infinite loops in attach/detach code
  ACPI / LPSS: Fix up acpi_lpss_create_device()
  ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage

Pull arch/tile fix from Chris Metcalf:
 "This fix eliminates a "section mismatch" warning caused by the new
  __ex_table checking code in modpost"

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  modpost: work correctly with tile coldtext sections

Pull module fix from Rusty Russell:
 "Single fix: missing rbtree removal in the module load failure path.
  Easy to trigger with bad params.

  Thanks to Peter Zijlstra and Arthur Marsh for going around on this
  one"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  module: Fix load_module() error path

The tilegx and tilepro compilers use .coldtext for their unlikely
executed text section name, so an __attribute__((cold)) function
will (when compiled with higher optimization levels) land in
the .coldtext section.

Modify modpost to add .coldtext to the set of OTHER_TEXT_SECTIONS
so we don't get warnings about referencing such a section in an
__ex_table block, and then also modify arch/tile/lib/memcpy_user_64.c
so that it uses plain ".coldtext" instead of ".coldtext.memcpy".
The latter naming is a relic of an earlier use of -ffunction-sections,
which we no longer use by default.
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>

The load_module() error path frees a module but forgot to take it out
of the mod_tree, leaving a dangling entry in the tree, causing havoc.

Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Tested-by: Arthur Marsh <arthur.marsh@internode.on.net>
Fixes: 93c2e105 ("module: Optimize __module_address() using a latched RB-tree")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

The clean targets miss some .cmd and .d files.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-kbuild@vger.kernel.org
Link: http://lkml.kernel.org/r/1434631938-12681-1-git-send-email-riku.voipio@linaro.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The "fix" in commit 0b08c5e5 ("audit: Fix check of return value of
strnlen_user()") didn't fix anything, it broke things.  As reported by
Steven Rostedt:

 "Yes, strnlen_user() returns 0 on fault, but if you look at what len is
  set to, than you would notice that on fault len would be -1"

because we just subtracted one from the return value.  So testing
against 0 doesn't test for a fault condition, it tests against a
perfectly valid empty string.

Also fix up the usual braindamage wrt using WARN_ON() inside a
conditional - make it part of the conditional and remove the explicit
unlikely() (which is already part of the WARN_ON*() logic, exactly so
that you don't have to write unreadable code.
Reported-and-tested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Paul Moore <pmoore@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Vinson reported shadow declaration of close introduced
by the following commit:

  106a94a0 perf stat: Introduce read_counters function

Using close_counters name instead.
Reported-by: Vinson Lee <vlee@twopensource.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 106a94a0 ("perf stat: Introduce read_counters function")
Link: http://lkml.kernel.org/r/20150708111731.GA3512@krava.redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull ARM updates from Russell King:
 "These are late by a week; they should have been merged during the
  merge window, but unfortunately, the ARM kernel build/boot farms were
  indicating random failures, and it wasn't clear whether the cause was
  something in these changes or something during the merge window.

  This is a set of merge window fixes with some documentation additions"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: avoid unwanted GCC memset()/memcpy() optimisations for IO variants
  ARM: pgtable: document mapping types
  ARM: io: convert ioremap*() to functions
  ARM: io: fix ioremap_wt() implementation
  ARM: io: document ARM specific behaviour of ioremap*() implementations
  ARM: fix lockdep unannotated irqs-off warning
  ARM: 8397/1: fix vdsomunge not to depend on glibc specific error.h
  ARM: add helpful message when truncating physical memory
  ARM: add help text for HIGHPTE configuration entry
  ARM: fix DEBUG_SET_MODULE_RONX build dependencies
  ARM: 8396/1: use phys_addr_t in pfn_to_kaddr()
  ARM: 8394/1: update memblock limit after mapping lowmem
  ARM: 8393/1: smp: Fix suspicious RCU usage with ipi tracepoints

In function mei_nfc_host_exit mei_cl_remove_device cannot be called
under the device mutex as device removing flow invokes the device driver
remove handler that calls in turn to mei_cl_disable_device which
naturally acquires the device mutex.

Also remove mei_cl_bus_remove_devices which has the same issue, but is
never executed as currently the only device on the mei client bus is NFC
and a new device cannot be easily added till the bus revamp is
completed.

This fixes regression caused by commit be9b720a ("mei_phy: move all
nfc logic from mei driver to nfc")

Prior to this change the nfc driver remove handler called to no-op
disable function while actual nfc device was disabled directly from the
mei driver.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* acpi-scan:
  ata: ahci_platform: Add ACPI _CLS matching
  ACPI / scan: Add support for ACPI _CLS device matching

* acpi-pnp:
  ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage

* acpi-soc:
  ACPI / LPSS: Fix up acpi_lpss_create_device()

* pm-domains:
  PM / Domains: Avoid infinite loops in attach/detach code

* pm-sleep:
  PM / hibernate: clarify resume documentation

* pm-wakeirq:
  PM / wakeirq: Avoid setting power.wakeirq too hastily

The __machine__findnew_compat() function is called only from
__machine__findnew_vdso_compat() which is called only from
machine__findnew_vdso() which already holds machine->dsos.lock, so
remove locking from __machine__findnew_compat().

This manifests itself tracing 32-bit programs with a 64-bit perf.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1436267618-20521-1-git-send-email-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

If dev_pm_attach_wake_irq() fails, the device's power.wakeirq field
should not be set to point to the struct wake_irq passed to that
function, as that object will be freed going forward.

For this reason, make dev_pm_attach_wake_irq() first call
device_wakeup_attach_irq() and only set the device's power.wakeirq
field if that's successful.

That requires device_wakeup_attach_irq() to be called under the
device's power.lock lock, but since dev_pm_attach_wake_irq() is
the only caller of it, the requisite changes are easy to make.

Fixes: 4990d4fe (PM / Wakeirq: Add automated device wake IRQ handling)
Reported-by: Felipe Balbi <balbi@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull perf fixes from Ingo Molnar:

 - fix the perf build, by fixing the rbtree.c sharing bug between kernel
   and tools/perf by creating a local copy of rbtree.c (more will be
   done for v4.3)

 - fix an AUX buffer (Intel-PT support) refcounting bug

 - fix copy_from_user_nmi() return value"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Fix copy_from_user_nmi() return if range is not ok
  perf: Fix AUX buffer refcounting
  tools: Copy rbtree_augmented.h from the kernel
  tools: Move rbtree.h from tools/perf/
  tools: Copy lib/rbtree.c to tools/lib/
  perf tools: Copy rbtree.h from the kernel
  tools: Adopt {READ,WRITE_ONCE} from the kernel

This patch adds ACPI supports for AHCI platform driver, which uses _CLS
method to match the device.

The following is an example of ASL structure in DSDT for a SATA controller,
which contains _CLS package to be matched by the ahci_platform driver:

  Device (AHC0) // AHCI Controller
  {
    Name(_HID, "AMDI0600")
    Name (_CCA, 1)
    Name (_CLS, Package (3)
    {
      0x01, // Base Class: Mass Storage
      0x06, // Sub-Class: serial ATA
      0x01, // Interface: AHCI
    })
    Name (_CRS, ResourceTemplate ()
    {
      Memory32Fixed (ReadWrite, 0xE0300000, 0x00010000)
      Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive,,,) { 387 }
    })
  }

Also, since ATA driver should not require PCI support for ATA_ACPI,
this patch removes dependency in the driver/ata/Kconfig.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>