- 07 Jun, 2020 15 commits
-
-
Xinwei Kong authored
[ Upstream commit bfda0445 ] Because of out-of-order execution about some CPU architecture, In this debug stage we find Completing spi interrupt enable -> prodrucing TXEI interrupt -> running "interrupt_transfer" function will prior to set "dw->rx and dws->rx_end" data, so this patch add memory barrier to enable dw->rx and dw->rx_end to be visible and solve to send SPI data error. eg: it will fix to this following low possibility error in testing environment which using SPI control to connect TPM Modules kernel: tpm tpm0: Operation Timed out kernel: tpm tpm0: tpm_relinquish_locality: : error -1 Signed-off-by:
fengsheng <fengsheng5@huawei.com> Signed-off-by:
Xinwei Kong <kong.kongxinwei@hisilicon.com> Link: https://lore.kernel.org/r/1578019930-55858-1-git-send-email-kong.kongxinwei@hisilicon.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Anju T Sudhakar authored
[ Upstream commit 48e626ac ] export_imc_mode_and_cmd() function which creates the debugfs interface for imc-mode and imc-command, is invoked when each nest pmu units is registered. When the first nest pmu unit is registered, export_imc_mode_and_cmd() creates 'imc' directory under `/debug/powerpc/`. In the subsequent invocations debugfs_create_dir() function returns, since the directory already exists. The recent commit <c33d4423> (debugfs: make error message a bit more verbose), throws a warning if we try to invoke `debugfs_create_dir()` with an already existing directory name. Address this warning by making the debugfs directory registration in the opal_imc_counters_probe() function, i.e invoke export_imc_mode_and_cmd() function from the probe function. Signed-off-by:
Anju T Sudhakar <anju@linux.vnet.ibm.com> Tested-by:
Nageswara R Sastry <nasastry@in.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191127072035.4283-1-anju@linux.vnet.ibm.comSigned-off-by:
-
Xiang Chen authored
[ Upstream commit 8c39673d ] Need to check the structure sas_port before using it. Link: https://lore.kernel.org/r/1573551059-107873-2-git-send-email-john.garry@huawei.comSigned-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Lucas De Marchi authored
[ Upstream commit 10d987fd ] Both Ice Lake and Elkhart Lake (gen 11) support MST on all external connections except DDI A. Tiger Lake (gen 12) supports on all external connections. Move the check to happen inside intel_dp_mst_encoder_init() and add specific platform checks. v2: Replace != with == checks for ports on gen < 11 (Ville) Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191015164029.18431-3-lucas.demarchi@intel.comSigned-off-by:
-
Dan Carpenter authored
commit 11e7a919 upstream. The problem is that we always copy a minimum of ETH_ZLEN (60) bytes from skb->data even when skb->len is less than ETH_ZLEN so it leads to a read overflow. The fix is to pad skb->data to at least ETH_ZLEN bytes. Cc: <stable@vger.kernel.org> Reported-by:
Hu Jiahui <kirin.say@gmail.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200527184830.GA1164846@mwandaSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
DENG Qingfang authored
commit 38152ea3 upstream. Currently, setting a bridge's self PVID to other value and deleting the default VID 1 renders untagged ports of that VLAN unable to talk to the CPU port: bridge vlan add dev br0 vid 2 pvid untagged self bridge vlan del dev br0 vid 1 self bridge vlan add dev sw0p0 vid 2 pvid untagged bridge vlan del dev sw0p0 vid 1 # br0 cannot send untagged frames out of sw0p0 anymore That is because the CPU port is set to security mode and its PVID is still 1, and untagged frames are dropped due to VLAN member violation. Set the CPU port to fallback mode so untagged frames can pass through. Fixes: 83163f7d ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by:
DENG Qingfang <dqfext@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Can Guo authored
commit 17c7d35f upstream. In queuecommand path, if DMA map fails, it bails out with clock held. In this case, release the clock to keep its usage paired. [mkp: applied by hand] Link: https://lore.kernel.org/r/0101016ed3d66395-1b7e7fce-b74d-42ca-a88a-4db78b795d3b-000000@us-west-2.amazonses.comReviewed-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Jérôme Pouiller authored
commit 83fc5dd5 upstream. The definitions of MMC_IOC_CMD and of MMC_IOC_MULTI_CMD rely on MMC_BLOCK_MAJOR: #define MMC_IOC_CMD _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd) #define MMC_IOC_MULTI_CMD _IOWR(MMC_BLOCK_MAJOR, 1, struct mmc_ioc_multi_cmd) However, MMC_BLOCK_MAJOR is defined in linux/major.h and linux/mmc/ioctl.h did not include it. Signed-off-by:
Jérôme Pouiller <jerome.pouiller@silabs.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200511161902.191405-1-Jerome.Pouiller@silabs.comSigned-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Daniel Axtens authored
commit 54e200ab upstream. alloc_percpu() may return NULL, which means chan->buf may be set to NULL. In that case, when we do *per_cpu_ptr(chan->buf, ...), we dereference an invalid pointer: BUG: Unable to handle kernel data access at 0x7dae0000 Faulting instruction address: 0xc0000000003f3fec ... NIP relay_open+0x29c/0x600 LR relay_open+0x270/0x600 Call Trace: relay_open+0x264/0x600 (unreliable) __blk_trace_setup+0x254/0x600 blk_trace_setup+0x68/0xa0 sg_ioctl+0x7bc/0x2e80 do_vfs_ioctl+0x13c/0x1300 ksys_ioctl+0x94/0x130 sys_ioctl+0x48/0xb0 system_call+0x5c/0x68 Check if alloc_percpu returns NULL. This was found by syzkaller both on x86 and powerpc, and the reproducer it found on powerpc is capable of hitting the issue as an unprivileged user. Fixes: 017c59c0 ("relay: Use per CPU constructs for the relay channel buffer pointers") Reported-by: syzbot+1e925b4b836afe85a1c6@syzkaller-ppc64.appspotmail.com Reported-by: syzbot+587b2421926808309d21@syzkaller-ppc64.appspotmail.com Reported-by: syzbot+58320b7171734bf79d26@syzkaller.appspotmail.com Reported-by: syzbot+d6074fb08bdb2e010520@syzkaller.appspotmail.com Signed-off-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Andrew Donnellan <ajd@linux.ibm.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: Akash Goel <akash.goel@intel.com> Cc: Andrew Donnellan <ajd@linux.ibm.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Salvatore Bonaccorso <carnil@debian.org> Cc: <stable@vger.kernel.org> [4.10+] Link: http://lkml.kernel.org/r/20191219121256.26480-1-dja@axtens.netSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Giuseppe Marco Randazzo authored
commit 63e49a9f upstream. This patch adds the AirVasT USB wireless devices 124a:4026 to the list of supported devices. It's using the ISL3886 usb firmware. Without this modification, the wiki adapter is not recognized. Cc: <stable@vger.kernel.org> Signed-off-by:
Giuseppe Marco Randazzo <gmrandazzo@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [formatted, reworded] Signed-off-by:
-
Julian Sax authored
commit 6507ef10 upstream. This device uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list. Cc: stable@vger.kernel.org Signed-off-by:
Julian Sax <jsbc@gmx.de> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Scott Shumate authored
commit e72455b8 upstream. Fix for non-working buttons on knock-off USB dongles for Sony controllers. These USB dongles are used to connect older Sony DA/DS1/DS2 controllers via USB and are common on Amazon, AliExpress, etc. Without the patch, the square, X, and circle buttons do not function. These dongles used to work prior to kernel 4.10 but removing the global DS3 report fixup in commit e19a267b ("HID: sony: DS3 comply to Linux gamepad spec") exposed the problem. Many people reported the problem on the Ubuntu forums and are working around the problem by falling back to the 4.9 hid-sony driver. The problem stems from these dongles incorrectly reporting their button count as 13 instead of 16. This patch fixes up the report descriptor by changing the button report count to 16 and removing 3 padding bits. Cc: stable@vger.kernel.org Fixes: e19a267b ("HID: sony: DS3 comply to Linux gamepad spec") Signed-off-by:
Scott Shumate <scott.shumate@gmail.com> Signed-off-by:
-
Fan Yang authored
commit 5bfea2d9 upstream. The original code in mm/mremap.c checks huge pmd by: if (is_swap_pmd(*old_pmd) || pmd_trans_huge(*old_pmd)) { However, a DAX mapped nvdimm is mapped as huge page (by default) but it is not transparent huge page (_PAGE_PSE | PAGE_DEVMAP). This commit changes the condition to include the case. This addresses CVE-2020-10757. Fixes: 5c7fb56e ("mm, dax: dax-pmd vs thp-pmd vs hugetlbfs-pmd") Cc: <stable@vger.kernel.org> Reported-by:
Fan Yang <Fan_Yang@sjtu.edu.cn> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Aneesh Kumar K.V authored
commit 86aa6668 upstream. nd_label->dpa issue was observed when trying to enable the namespace created with little-endian kernel on a big-endian kernel. That made me run `sparse` on the rest of the code and other changes are the result of that. Fixes: d9b83c75 ("libnvdimm, btt: rework error clearing") Fixes: 9dedc73a ("libnvdimm/btt: Fix LBA masking during 'free list' population") Reviewed-by:
Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/20190809074726.27815-1-aneesh.kumar@linux.ibm.comSigned-off-by:
-
Tejun Heo authored
[ Upstream commit d8ef4b38 ] This reverts commit 9a9e97b2 ("cgroup: Add memory barriers to plug cgroup_rstat_updated() race window"). The commit was added in anticipation of memcg rstat conversion which needed synchronous accounting for the event counters (e.g. oom kill count). However, the conversion didn't get merged due to percpu memory overhead concern which couldn't be addressed at the time. Unfortunately, the patch's addition of smp_mb() to cgroup_rstat_updated() meant that every scheduling event now had to go through an additional full barrier and Mel Gorman noticed it as 1% regression in netperf UDP_STREAM test. There's no need to have this barrier in tree now and even if we need synchronous accounting in the future, the right thing to do is separating that out to a separate function so that hot paths which don't care about synchronous behavior don't have to pay the overhead of the full barrier. Let's revert. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Mel Gorman <mgorman@techsingularity.net> Link: http://lkml.kernel.org/r/20200409154413.GK3818@techsingularity.net Cc: v4.18+ Signed-off-by:
-
- 03 Jun, 2020 25 commits
-
-
Greg Kroah-Hartman authored
-
Liviu Dudau authored
commit 6ade2032 upstream. find_vmap_area() can return a NULL pointer and we're going to dereference it without checking it first. Use the existing find_vm_area() function which does exactly what we want and checks for the NULL pointer. Link: http://lkml.kernel.org/r/20181228171009.22269-1-liviu@dudau.co.uk Fixes: f3c01d2f ("mm: vmalloc: avoid racy handling of debugobjects in vunmap") Signed-off-by:
Liviu Dudau <liviu@dudau.co.uk> Reviewed-by:
-
Pablo Neira Ayuso authored
commit 4946ea5c upstream. >> include/linux/netfilter/nf_conntrack_pptp.h:13:20: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers] extern const char *const pptp_msg_name(u_int16_t msg); ^~~~~~ Reported-by:
kbuild test robot <lkp@intel.com> Fixes: 4c559f15 ("netfilter: nf_conntrack_pptp: prevent buffer overflows in debug code") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Qiushi Wu authored
commit a068aab4 upstream. kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous commit "b8eb7183" fixed a similar problem. Fixes: 07699f9a ("bonding: add sysfs /slave dir for bond slave devices.") Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Eric Dumazet authored
commit a4976a3e upstream. TCP tp->lsndtime unit/base is tcp_jiffies32, not tcp_time_stamp() Fixes: 36bedb3f ("crypto: chtls - Inline TLS record Tx") Signed-off-by:
-
Qiushi Wu authored
commit 15c97385 upstream. In function qlcnic_83xx_interrupt_test(), function qlcnic_83xx_diag_alloc_res() is not handled by function qlcnic_83xx_diag_free_res() after a call of the function qlcnic_alloc_mbx_args() failed. Fix this issue by adding a jump target "fail_mbx_args", and jump to this new target when qlcnic_alloc_mbx_args() failed. Fixes: b6b4316c ("qlcnic: Handle qlcnic_alloc_mbx_args() failure") Signed-off-by:
-
Björn Töpel authored
commit b16a87d0 upstream. The npgs member of struct xdp_umem is an u32 entity, and stores the number of pages the UMEM consumes. The calculation of npgs npgs = size / PAGE_SIZE can overflow. To avoid overflow scenarios, the division is now first stored in a u64, and the result is verified to fit into 32b. An alternative would be storing the npgs as a u64, however, this wastes memory and is an unrealisticly large packet area. Fixes: c0c77d8f ("xsk: add user memory registration support sockopt") Reported-by:
"Minh Bùi Quang" <minhquangbui99@gmail.com> Signed-off-by:
Björn Töpel <bjorn.topel@intel.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/bpf/CACtPs=GGvV-_Yj6rbpzTVnopgi5nhMoCcTkSkYrJHGQHJWFZMQ@mail.gmail.com/ Link: https://lore.kernel.org/bpf/20200525080400.13195-1-bjorn.topel@gmail.comSigned-off-by:
-
Michael Chan authored
commit b8056e84 upstream. We have logic to maintain network counters across resets by storing the counters in bp->net_stats_prev before reset. But not all resets will clear the counters. Certain resets that don't need to change the number of rings do not clear the counters. The current logic accumulates the counters before all resets, causing big jumps in the counters after some resets, such as ethtool -G. Fix it by only accumulating the counters during reset if the irq_re_init parameter is set. The parameter signifies that all rings and interrupts will be reset and that means that the counters will also be reset. Reported-by:
Vijayendra Suman <vijayendra.suman@oracle.com> Fixes: b8875ca3 ("bnxt_en: Save ring statistics before reset.") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Xin Long authored
commit 3c96ec56 upstream. For transport mode, when ipv6 nexthdr is set, the packet format might be like: ---------------------------------------------------- | | dest | | | | ESP | ESP | | IP6 hdr| opts.| ESP | TCP | Data | Trailer | ICV | ---------------------------------------------------- What it wants to get for x-proto in esp6_gso_encap() is the proto that will be set in ESP nexthdr. So it should skip all ipv6 nexthdrs and get the real transport protocol. Othersize, the wrong proto number will be set into ESP nexthdr. This patch is to skip all ipv6 nexthdrs by calling ipv6_skip_exthdr() in esp6_gso_encap(). Fixes: 7862b405 ("esp: Add gso handlers for esp4 and esp6") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 4c559f15 upstream. Dan Carpenter says: "Smatch complains that the value for "cmd" comes from the network and can't be trusted." Add pptp_msg_name() helper function that checks for the array boundary. Fixes: f09943fe ("[NETFILTER]: nf_conntrack/nf_nat: add PPTP helper port") Reported-by:
-
Pablo Neira Ayuso authored
commit 703acd70 upstream. Restore helper data size initialization and fix memcopy of the helper data size. Fixes: 157ffffe ("netfilter: nfnetlink_cthelper: reject too large userspace allocation requests") Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Phil Sutter authored
commit a164b95a upstream. If IPSET_FLAG_SKIP_SUBCOUNTER_UPDATE is set, user requested to not update counters in sub sets. Therefore IPSET_FLAG_SKIP_COUNTER_UPDATE must be set, not unset. Fixes: 6e01781d ("netfilter: ipset: set match: add support to match the counters") Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
-
Michael Braun authored
commit e9c284ec upstream. Currently, using the bridge reject target with tagged packets results in untagged packets being sent back. Fix this by mirroring the vlan id as well. Fixes: 85f5b308 ("netfilter: bridge: add reject support") Signed-off-by:
Michael Braun <michael-dev@fami-braun.de> Signed-off-by:
-
Xin Long authored
commit 976eba8a upstream. In Commit dd9ee344 ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel"), it tries to receive IPIP packets in vti by calling xfrm_input(). This case happens when a small packet or frag sent by peer is too small to get compressed. However, xfrm_input() will still get to the IPCOMP path where skb sec_path is set, but never dropped while it should have been done in vti_ipcomp4_protocol.cb_handler(vti_rcv_cb), as it's not an ipcomp4 packet. This will cause that the packet can never pass xfrm4_policy_check() in the upper protocol rcv functions. So this patch is to call ip_tunnel_rcv() to process IPIP packets instead. Fixes: dd9ee344 ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel") Reported-by:
Xiumei Mu <xmu@redhat.com> Signed-off-by:
-
Jeremy Sowden authored
commit f981c57f upstream. The ipip tunnel introduced in commit dd9ee344 ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel") largely duplicated the existing vti_input and vti_recv functions. Refactored to deduplicate the common code. Signed-off-by:
Jeremy Sowden <jeremy@azazel.net> Signed-off-by:
-
Antony Antony authored
commit 29e42766 upstream. s/xfrm_state_offload/xfrm_user_offload/ Fixes: d77e38e6 ("xfrm: Add an IPsec hardware offloading API") Signed-off-by:
Antony Antony <antony@phenome.org> Signed-off-by:
-
Xin Long authored
commit f6a23d85 upstream. This patch is to fix a crash: [ ] kasan: GPF could be caused by NULL-ptr deref or user memory access [ ] general protection fault: 0000 [#1] SMP KASAN PTI [ ] RIP: 0010:ipv6_local_error+0xac/0x7a0 [ ] Call Trace: [ ] xfrm6_local_error+0x1eb/0x300 [ ] xfrm_local_error+0x95/0x130 [ ] __xfrm6_output+0x65f/0xb50 [ ] xfrm6_output+0x106/0x46f [ ] udp_tunnel6_xmit_skb+0x618/0xbf0 [ip6_udp_tunnel] [ ] vxlan_xmit_one+0xbc6/0x2c60 [vxlan] [ ] vxlan_xmit+0x6a0/0x4276 [vxlan] [ ] dev_hard_start_xmit+0x165/0x820 [ ] __dev_queue_xmit+0x1ff0/0x2b90 [ ] ip_finish_output2+0xd3e/0x1480 [ ] ip_do_fragment+0x182d/0x2210 [ ] ip_output+0x1d0/0x510 [ ] ip_send_skb+0x37/0xa0 [ ] raw_sendmsg+0x1b4c/0x2b80 [ ] sock_sendmsg+0xc0/0x110 This occurred when sending a v4 skb over vxlan6 over ipsec, in which case skb->protocol == htons(ETH_P_IPV6) while skb->sk->sk_family == AF_INET in xfrm_local_error(). Then it will go to xfrm6_local_error() where it tries to get ipv6 info from a ipv4 sk. This issue was actually fixed by Commit 628e341f ("xfrm: make local error reporting more robust"), but brought back by Commit 844d4874 ("xfrm: choose protocol family by skb protocol"). So to fix it, we should call xfrm6_local_error() only when skb->protocol is htons(ETH_P_IPV6) and skb->sk->sk_family is AF_INET6. Fixes: 844d4874 ("xfrm: choose protocol family by skb protocol") Reported-by:
-
Xin Long authored
commit ed17b8d3 upstream. This waring can be triggered simply by: # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \ priority 1 mark 0 mask 0x10 #[1] # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \ priority 2 mark 0 mask 0x1 #[2] # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \ priority 2 mark 0 mask 0x10 #[3] Then dmesg shows: [ ] WARNING: CPU: 1 PID: 7265 at net/xfrm/xfrm_policy.c:1548 [ ] RIP: 0010:xfrm_policy_insert_list+0x2f2/0x1030 [ ] Call Trace: [ ] xfrm_policy_inexact_insert+0x85/0xe50 [ ] xfrm_policy_insert+0x4ba/0x680 [ ] xfrm_add_policy+0x246/0x4d0 [ ] xfrm_user_rcv_msg+0x331/0x5c0 [ ] netlink_rcv_skb+0x121/0x350 [ ] xfrm_netlink_rcv+0x66/0x80 [ ] netlink_unicast+0x439/0x630 [ ] netlink_sendmsg+0x714/0xbf0 [ ] sock_sendmsg+0xe2/0x110 The issue was introduced by Commit 7cb8a939 ("xfrm: Allow inserting policies with matching mark and different priorities"). After that, the policies [1] and [2] would be able to be added with different priorities. However, policy [3] will actually match both [1] and [2]. Policy [1] was matched due to the 1st 'return true' in xfrm_policy_mark_match(), and policy [2] was matched due to the 2nd 'return true' in there. It caused WARN_ON() in xfrm_policy_insert_list(). This patch is to fix it by only (the same value and priority) as the same policy in xfrm_policy_mark_match(). Thanks to Yuehaibing, we could make this fix better. v1->v2: - check policy->mark.v == pol->mark.v only without mask. Fixes: 7cb8a939 ("xfrm: Allow inserting policies with matching mark and different priorities") Reported-by:
-
Nicolas Dichtel authored
commit c95c5f58 upstream. Here is the steps to reproduce the problem: ip netns add foo ip netns add bar ip -n foo link add xfrmi0 type xfrm dev lo if_id 42 ip -n foo link set xfrmi0 netns bar ip netns del foo ip netns del bar Which results to: [ 186.686395] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bd3: 0000 [#1] SMP PTI [ 186.687665] CPU: 7 PID: 232 Comm: kworker/u16:2 Not tainted 5.6.0+ #1 [ 186.688430] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 186.689420] Workqueue: netns cleanup_net [ 186.689903] RIP: 0010:xfrmi_dev_uninit+0x1b/0x4b [xfrm_interface] [ 186.690657] Code: 44 f6 ff ff 31 c0 5b 5d 41 5c 41 5d 41 5e c3 48 8d 8f c0 08 00 00 8b 05 ce 14 00 00 48 8b 97 d0 08 00 00 48 8b 92 c0 0e 00 00 <48> 8b 14 c2 48 8b 02 48 85 c0 74 19 48 39 c1 75 0c 48 8b 87 c0 08 [ 186.692838] RSP: 0018:ffffc900003b7d68 EFLAGS: 00010286 [ 186.693435] RAX: 000000000000000d RBX: ffff8881b0f31000 RCX: ffff8881b0f318c0 [ 186.694334] RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000246 RDI: ffff8881b0f31000 [ 186.695190] RBP: ffffc900003b7df0 R08: ffff888236c07740 R09: 0000000000000040 [ 186.696024] R10: ffffffff81fce1b8 R11: 0000000000000002 R12: ffffc900003b7d80 [ 186.696859] R13: ffff8881edcc6a40 R14: ffff8881a1b6e780 R15: ffffffff81ed47c8 [ 186.697738] FS: 0000000000000000(0000) GS:ffff888237dc0000(0000) knlGS:0000000000000000 [ 186.698705] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 186.699408] CR2: 00007f2129e93148 CR3: 0000000001e0a000 CR4: 00000000000006e0 [ 186.700221] Call Trace: [ 186.700508] rollback_registered_many+0x32b/0x3fd [ 186.701058] ? __rtnl_unlock+0x20/0x3d [ 186.701494] ? arch_local_irq_save+0x11/0x17 [ 186.702012] unregister_netdevice_many+0x12/0x55 [ 186.702594] default_device_exit_batch+0x12b/0x150 [ 186.703160] ? prepare_to_wait_exclusive+0x60/0x60 [ 186.703719] cleanup_net+0x17d/0x234 [ 186.704138] process_one_work+0x196/0x2e8 [ 186.704652] worker_thread+0x1a4/0x249 [ 186.705087] ? cancel_delayed_work+0x92/0x92 [ 186.705620] kthread+0x105/0x10f [ 186.706000] ? __kthread_bind_mask+0x57/0x57 [ 186.706501] ret_from_fork+0x35/0x40 [ 186.706978] Modules linked in: xfrm_interface nfsv3 nfs_acl auth_rpcgss nfsv4 nfs lockd grace fscache sunrpc button parport_pc parport serio_raw evdev pcspkr loop ext4 crc16 mbcache jbd2 crc32c_generic 8139too ide_cd_mod cdrom ide_gd_mod ata_generic ata_piix libata scsi_mod piix psmouse i2c_piix4 ide_core 8139cp i2c_core mii floppy [ 186.710423] ---[ end trace 463bba18105537e5 ]--- The problem is that x-netns xfrm interface are not removed when the link netns is removed. This causes later this oops when thoses interfaces are removed. Let's add a handler to remove all interfaces related to a netns when this netns is removed. Fixes: f203b76d ("xfrm: Add virtual xfrm interfaces") Reported-by:
Christophe Gouault <christophe.gouault@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Xin Long authored
commit a204aef9 upstream. An use-after-free crash can be triggered when sending big packets over vxlan over esp with esp offload enabled: [] BUG: KASAN: use-after-free in ipv6_gso_pull_exthdrs.part.8+0x32c/0x4e0 [] Call Trace: [] dump_stack+0x75/0xa0 [] kasan_report+0x37/0x50 [] ipv6_gso_pull_exthdrs.part.8+0x32c/0x4e0 [] ipv6_gso_segment+0x2c8/0x13c0 [] skb_mac_gso_segment+0x1cb/0x420 [] skb_udp_tunnel_segment+0x6b5/0x1c90 [] inet_gso_segment+0x440/0x1380 [] skb_mac_gso_segment+0x1cb/0x420 [] esp4_gso_segment+0xae8/0x1709 [esp4_offload] [] inet_gso_segment+0x440/0x1380 [] skb_mac_gso_segment+0x1cb/0x420 [] __skb_gso_segment+0x2d7/0x5f0 [] validate_xmit_skb+0x527/0xb10 [] __dev_queue_xmit+0x10f8/0x2320 <--- [] ip_finish_output2+0xa2e/0x1b50 [] ip_output+0x1a8/0x2f0 [] xfrm_output_resume+0x110e/0x15f0 [] __xfrm4_output+0xe1/0x1b0 [] xfrm4_output+0xa0/0x200 [] iptunnel_xmit+0x5a7/0x920 [] vxlan_xmit_one+0x1658/0x37a0 [vxlan] [] vxlan_xmit+0x5e4/0x3ec8 [vxlan] [] dev_hard_start_xmit+0x125/0x540 [] __dev_queue_xmit+0x17bd/0x2320 <--- [] ip6_finish_output2+0xb20/0x1b80 [] ip6_output+0x1b3/0x390 [] ip6_xmit+0xb82/0x17e0 [] inet6_csk_xmit+0x225/0x3d0 [] __tcp_transmit_skb+0x1763/0x3520 [] tcp_write_xmit+0xd64/0x5fe0 [] __tcp_push_pending_frames+0x8c/0x320 [] tcp_sendmsg_locked+0x2245/0x3500 [] tcp_sendmsg+0x27/0x40 As on the tx path of vxlan over esp, skb->inner_network_header would be set on vxlan_xmit() and xfrm4_tunnel_encap_add(), and the later one can overwrite the former one. It causes skb_udp_tunnel_segment() to use a wrong skb->inner_network_header, then the issue occurs. This patch is to fix it by calling xfrm_output_gso() instead when the inner_protocol is set, in which gso_segment of inner_protocol will be done first. While at it, also improve some code around. Fixes: 7862b405 ("esp: Add gso handlers for esp4 and esp6") Reported-by:
-
Xin Long authored
commit afcaf61b upstream. For beet mode, when it's ipv6 inner address with nexthdrs set, the packet format might be: ---------------------------------------------------- | outer | | dest | | | ESP | ESP | | IP hdr | ESP | opts.| TCP | Data | Trailer | ICV | ---------------------------------------------------- The nexthdr from ESP could be NEXTHDR_HOP(0), so it should continue processing the packet when nexthdr returns 0 in xfrm_input(). Otherwise, when ipv6 nexthdr is set, the packet will be dropped. I don't see any error cases that nexthdr may return 0. So fix it by removing the check for nexthdr == 0. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Al Viro authored
commit 9e463654 upstream. copy the corresponding pieces of init_fpstate into the gaps instead. Cc: stable@kernel.org Tested-by:
Alexander Potapenko <glider@google.com> Acked-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Alexander Dahl authored
commit 88743470 upstream. The intermediate result of the old term (4UL * 1024 * 1024 * 1024) is 4 294 967 296 or 0x100000000 which is no problem on 64 bit systems. The patch does not change the later overall result of 0x100000 for MAX_DMA32_PFN (after it has been shifted by PAGE_SHIFT). The new calculation yields the same result, but does not require 64 bit arithmetic. On 32 bit systems the old calculation suffers from an arithmetic overflow in that intermediate term in braces: 4UL aka unsigned long int is 4 byte wide and an arithmetic overflow happens (the 0x100000000 does not fit in 4 bytes), the in braces result is truncated to zero, the following right shift does not alter that, so MAX_DMA32_PFN evaluates to 0 on 32 bit systems. That wrong value is a problem in a comparision against MAX_DMA32_PFN in the init code for swiotlb in pci_swiotlb_detect_4gb() to decide if swiotlb should be active. That comparison yields the opposite result, when compiling on 32 bit systems. This was not possible before 1b7e03ef ("x86, NUMA: Enable emulation on 32bit too") when that MAX_DMA32_PFN was first made visible to x86_32 (and which landed in v3.0). In practice this wasn't a problem, unless CONFIG_SWIOTLB is active on x86-32. However if one has set CONFIG_IOMMU_INTEL, since c5a5dc4c ("iommu/vt-d: Don't switch off swiotlb if bounce page is used") there's a dependency on CONFIG_SWIOTLB, which was not necessarily active before. That landed in v5.4, where we noticed it in the fli4l Linux distribution. We have CONFIG_IOMMU_INTEL active on both 32 and 64 bit kernel configs there (I could not find out why, so let's just say historical reasons). The effect is at boot time 64 MiB (default size) were allocated for bounce buffers now, which is a noticeable amount of memory on small systems like pcengines ALIX 2D3 with 256 MiB memory, which are still frequently used as home routers. We noticed this effect when migrating from kernel v4.19 (LTS) to v5.4 (LTS) in fli4l and got that kernel messages for example: Linux version 5.4.22 (buildroot@buildroot) (gcc version 7.3.0 (Buildroot 2018.02.8)) #1 SMP Mon Nov 26 23:40:00 CET 2018 … Memory: 183484K/261756K available (4594K kernel code, 393K rwdata, 1660K rodata, 536K init, 456K bss , 78272K reserved, 0K cma-reserved, 0K highmem) … PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB: mapped [mem 0x0bb78000-0x0fb78000] (64MB) The initial analysis and the suggested fix was done by user 'sourcejedi' at stackoverflow and explicitly marked as GPLv2 for inclusion in the Linux kernel: https://unix.stackexchange.com/a/520525/50007 The new calculation, which does not suffer from that overflow, is the same as for arch/mips now as suggested by Robin Murphy. The fix was tested by fli4l users on round about two dozen different systems, including both 32 and 64 bit archs, bare metal and virtualized machines. [ bp: Massage commit message. ] Fixes: 1b7e03ef ("x86, NUMA: Enable emulation on 32bit too") Reported-by:
Alan Jenkins <alan.christopher.jenkins@gmail.com> Suggested-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Alexander Dahl <post@lespocky.de> Signed-off-by:
-
Linus Lüssing authored
commit e2d4a80f upstream. On a non-forwarding 802.11s link between two fairly busy neighboring nodes (iperf with -P 16 at ~850MBit/s TCP; 1733.3 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 4), so with frequent PREQ retries, usually after around 30-40 seconds the following crash would occur: [ 1110.822428] Unable to handle kernel read from unreadable memory at virtual address 00000000 [ 1110.830786] Mem abort info: [ 1110.833573] Exception class = IABT (current EL), IL = 32 bits [ 1110.839494] SET = 0, FnV = 0 [ 1110.842546] EA = 0, S1PTW = 0 [ 1110.845678] user pgtable: 4k pages, 48-bit VAs, pgd = ffff800076386000 [ 1110.852204] [0000000000000000] *pgd=00000000f6322003, *pud=00000000f62de003, *pmd=0000000000000000 [ 1110.861167] Internal error: Oops: 86000004 [#1] PREEMPT SMP [ 1110.866730] Modules linked in: pppoe ppp_async batman_adv ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 usb_storage xhci_plat_hcd xhci_pci xhci_hcd dwc3 usbcore usb_common [ 1110.932190] Process swapper/3 (pid: 0, stack limit = 0xffff0000090c8000) [ 1110.938884] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.14.162 #0 [ 1110.944965] Hardware name: LS1043A RGW Board (DT) [ 1110.949658] task: ffff8000787a81c0 task.stack: ffff0000090c8000 [ 1110.955568] PC is at 0x0 [ 1110.958097] LR is at call_timer_fn.isra.27+0x24/0x78 [ 1110.963055] pc : [<0000000000000000>] lr : [<ffff0000080ff29c>] pstate: 00400145 [ 1110.970440] sp : ffff00000801be10 [ 1110.973744] x29: ffff00000801be10 x28: ffff000008bf7018 [ 1110.979047] x27: ffff000008bf87c8 x26: ffff000008c160c0 [ 1110.984352] x25: 0000000000000000 x24: 0000000000000000 [ 1110.989657] x23: dead000000000200 x22: 0000000000000000 [ 1110.994959] x21: 0000000000000000 x20: 0000000000000101 [ 1111.000262] x19: ffff8000787a81c0 x18: 0000000000000000 [ 1111.005565] x17: ffff0000089167b0 x16: 0000000000000058 [ 1111.010868] x15: ffff0000089167b0 x14: 0000000000000000 [ 1111.016172] x13: ffff000008916788 x12: 0000000000000040 [ 1111.021475] x11: ffff80007fda9af0 x10: 0000000000000001 [ 1111.026777] x9 : ffff00000801bea0 x8 : 0000000000000004 [ 1111.032080] x7 : 0000000000000000 x6 : ffff80007fda9aa8 [ 1111.037383] x5 : ffff00000801bea0 x4 : 0000000000000010 [ 1111.042685] x3 : ffff00000801be98 x2 : 0000000000000614 [ 1111.047988] x1 : 0000000000000000 x0 : 0000000000000000 [ 1111.053290] Call trace: [ 1111.055728] Exception stack(0xffff00000801bcd0 to 0xffff00000801be10) [ 1111.062158] bcc0: 0000000000000000 0000000000000000 [ 1111.069978] bce0: 0000000000000614 ffff00000801be98 0000000000000010 ffff00000801bea0 [ 1111.077798] bd00: ffff80007fda9aa8 0000000000000000 0000000000000004 ffff00000801bea0 [ 1111.085618] bd20: 0000000000000001 ffff80007fda9af0 0000000000000040 ffff000008916788 [ 1111.093437] bd40: 0000000000000000 ffff0000089167b0 0000000000000058 ffff0000089167b0 [ 1111.101256] bd60: 0000000000000000 ffff8000787a81c0 0000000000000101 0000000000000000 [ 1111.109075] bd80: 0000000000000000 dead000000000200 0000000000000000 0000000000000000 [ 1111.116895] bda0: ffff000008c160c0 ffff000008bf87c8 ffff000008bf7018 ffff00000801be10 [ 1111.124715] bdc0: ffff0000080ff29c ffff00000801be10 0000000000000000 0000000000400145 [ 1111.132534] bde0: ffff8000787a81c0 ffff00000801bde8 0000ffffffffffff 000001029eb19be8 [ 1111.140353] be00: ffff00000801be10 0000000000000000 [ 1111.145220] [< (null)>] (null) [ 1111.149917] [<ffff0000080ff77c>] run_timer_softirq+0x184/0x398 [ 1111.155741] [<ffff000008081938>] __do_softirq+0x100/0x1fc [ 1111.161130] [<ffff0000080a2e28>] irq_exit+0x80/0xd8 [ 1111.166002] [<ffff0000080ea708>] __handle_domain_irq+0x88/0xb0 [ 1111.171825] [<ffff000008081678>] gic_handle_irq+0x68/0xb0 [ 1111.177213] Exception stack(0xffff0000090cbe30 to 0xffff0000090cbf70) [ 1111.183642] be20: 0000000000000020 0000000000000000 [ 1111.191461] be40: 0000000000000001 0000000000000000 00008000771af000 0000000000000000 [ 1111.199281] be60: ffff000008c95180 0000000000000000 ffff000008c19360 ffff0000090cbef0 [ 1111.207101] be80: 0000000000000810 0000000000000400 0000000000000098 ffff000000000000 [ 1111.214920] bea0: 0000000000000001 ffff0000089167b0 0000000000000000 ffff0000089167b0 [ 1111.222740] bec0: 0000000000000000 ffff000008c198e8 ffff000008bf7018 ffff000008c19000 [ 1111.230559] bee0: 0000000000000000 0000000000000000 ffff8000787a81c0 ffff000008018000 [ 1111.238380] bf00: ffff00000801c000 ffff00000913ba34 ffff8000787a81c0 ffff0000090cbf70 [ 1111.246199] bf20: ffff0000080857cc ffff0000090cbf70 ffff0000080857d0 0000000000400145 [ 1111.254020] bf40: ffff000008018000 ffff00000801c000 ffffffffffffffff ffff0000080fa574 [ 1111.261838] bf60: ffff0000090cbf70 ffff0000080857d0 [ 1111.266706] [<ffff0000080832e8>] el1_irq+0xe8/0x18c [ 1111.271576] [<ffff0000080857d0>] arch_cpu_idle+0x10/0x18 [ 1111.276880] [<ffff0000080d7de4>] do_idle+0xec/0x1b8 [ 1111.281748] [<ffff0000080d8020>] cpu_startup_entry+0x20/0x28 [ 1111.287399] [<ffff00000808f81c>] secondary_start_kernel+0x104/0x110 [ 1111.293662] Code: bad PC value [ 1111.296710] ---[ end trace 555b6ca4363c3edd ]--- [ 1111.301318] Kernel panic - not syncing: Fatal exception in interrupt [ 1111.307661] SMP: stopping secondary CPUs [ 1111.311574] Kernel Offset: disabled [ 1111.315053] CPU features: 0x0002000 [ 1111.318530] Memory Limit: none [ 1111.321575] Rebooting in 3 seconds.. With some added debug output / delays we were able to push the crash from the timer callback runner into the callback function and by that shedding some light on which object holding the timer gets corrupted: [ 401.720899] Unable to handle kernel read from unreadable memory at virtual address 00000868 [...] [ 402.335836] [<ffff0000088fafa4>] _raw_spin_lock_bh+0x14/0x48 [ 402.341548] [<ffff000000dbe684>] mesh_path_timer+0x10c/0x248 [mac80211] [ 402.348154] [<ffff0000080ff29c>] call_timer_fn.isra.27+0x24/0x78 [ 402.354150] [<ffff0000080ff77c>] run_timer_softirq+0x184/0x398 [ 402.359974] [<ffff000008081938>] __do_softirq+0x100/0x1fc [ 402.365362] [<ffff0000080a2e28>] irq_exit+0x80/0xd8 [ 402.370231] [<ffff0000080ea708>] __handle_domain_irq+0x88/0xb0 [ 402.376053] [<ffff000008081678>] gic_handle_irq+0x68/0xb0 The issue happens due to the following sequence of events: 1) mesh_path_start_discovery(): -> spin_unlock_bh(&mpath->state_lock) before mesh_path_sel_frame_tx() 2) mesh_path_free_rcu() -> del_timer_sync(&mpath->timer) [...] -> kfree_rcu(mpath) 3) mesh_path_start_discovery(): -> mod_timer(&mpath->timer, ...) [...] -> rcu_read_unlock() 4) mesh_path_free_rcu()'s kfree_rcu(): -> kfree(mpath) 5) mesh_path_timer() starts after timeout, using freed mpath object So a use-after-free issue due to a timer re-arming bug caused by an early spin-unlocking. This patch fixes this issue by re-checking if mpath is about to be free'd and if so bails out of re-arming the timer. Cc: stable@vger.kernel.org Fixes: 050ac52c ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol") Cc: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
Linus Lüssing <ll@simonwunderlich.de> Link: https://lore.kernel.org/r/20200522170413.14973-1-linus.luessing@c0d3.blueSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jason Gunthorpe authored
commit c85f4abe upstream. Fix use after free when user user space request uobject concurrently for the same object, within the RCU grace period. In that case, remove_handle_idr_uobject() is called twice and we will have an extra put on the uobject which cause use after free. Fix it by leaving the uobject write locked after it was removed from the idr. Call to rdma_lookup_put_uobject with UVERBS_LOOKUP_DESTROY instead of UVERBS_LOOKUP_WRITE will do the work. refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 1381 at lib/refcount.c:28 refcount_warn_saturate+0xfe/0x1a0 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 1381 Comm: syz-executor.0 Not tainted 5.5.0-rc3 #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x94/0xce panic+0x234/0x56f __warn+0x1cc/0x1e1 report_bug+0x200/0x310 fixup_bug.part.11+0x32/0x80 do_error_trap+0xd3/0x100 do_invalid_op+0x31/0x40 invalid_op+0x1e/0x30 RIP: 0010:refcount_warn_saturate+0xfe/0x1a0 Code: 0f 0b eb 9b e8 23 f6 6d ff 80 3d 6c d4 19 03 00 75 8d e8 15 f6 6d ff 48 c7 c7 c0 02 55 bd c6 05 57 d4 19 03 01 e8 a2 58 49 ff <0f> 0b e9 6e ff ff ff e8 f6 f5 6d ff 80 3d 42 d4 19 03 00 0f 85 5c RSP: 0018:ffffc90002df7b98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88810f6a193c RCX: ffffffffba649009 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88811b0283cc RBP: 0000000000000003 R08: ffffed10236060e3 R09: ffffed10236060e3 R10: 0000000000000001 R11: ffffed10236060e2 R12: ffff88810f6a193c R13: ffffc90002df7d60 R14: 0000000000000000 R15: ffff888116ae6a08 uverbs_uobject_put+0xfd/0x140 __uobj_perform_destroy+0x3d/0x60 ib_uverbs_close_xrcd+0x148/0x170 ib_uverbs_write+0xaa5/0xdf0 __vfs_write+0x7c/0x100 vfs_write+0x168/0x4a0 ksys_write+0xc8/0x200 do_syscall_64+0x9c/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x465b49 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f759d122c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000073bfa8 RCX: 0000000000465b49 RDX: 000000000000000c RSI: 0000000020000080 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f759d1236bc R13: 00000000004ca27c R14: 000000000070de40 R15: 00000000ffffffff Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: 0x39400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: 7452a3c7 ("IB/uverbs: Allow RDMA_REMOVE_DESTROY to work concurrently with disassociate") Link: https://lore.kernel.org/r/20200527135534.482279-1-leon@kernel.orgSigned-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
