Document the updated binding which conforms to the new DSA binding in
net/dsa/dsa.txt.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation for allowing switch drivers to implement system-wide
suspend/resume functions, export dsa_switch_suspend and
dsa_switch_resume() such that these are callable from the appropriate
driver specific suspend/resume functions.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
Fix mv88e6xxx wait function

The mv88e6xxx wait function can be upset of the system has nots of
other things to do and a sleep takes a lot longer than expected. Fix
this be using a fixed number of iterations, rather than a fixed
walkclock time.

Witht that change made, it is possible to consoliate another
wait function.

A wait actually timing out should not happen and when it does, it
means something serious is wrong. Make sure an error is logged,
since not all callers will log an error.
====================
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When mv88e6xxx_wait() returns a timeout, something bad has
happened. Make sure it is noticed by logging an error.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that mv88e6xx_wait() iterated on a counter than a fixed time
interval, it implements the same mechanism as mv88e6xxx_update() uses.
So use it in mv88e6xx_wait().
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mv88e6xxx driver times out operations on the switch based on
looping until an elapsed wall clock time is reached. However, if
usleep_range() sleeps much longer than expected, it could timeout with
an error without actually checking to see if the devices has completed
the operation. So replace the elapsed time with a fixed upper bound on
the number of loops.

Testing on various switches has shown that switches takes either 0 or
1 iteration, so a maximum of 16 iterations is a safe limit.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
PHY Kconfig and Makefile cleanup

The Ethernet PHY directory has slowly been getting more entries.
Split the entries in the Makefile and Kconfig into MDIO bus drivers
and PHYs. Within these two groups, sort them. This should reduce merge
conflicts and aid finding what one searches for.

The Kconfig text contains redundant "Driver for" and "Support for"
which add little value, make the vendor less obvious, and defeat the
shortcut key in the menu. Remove such text.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the redundant "Support for" and "Drivers for" from the Kconfig
short description. This makes the manufacture much more prominent in
the list and makes the shortcut keys useful.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sort the files to reduce merge conflicts and to make it easier to find
drivers by name. Also separate the MDIO bus drivers from the PHY
drivers, again to help find what you need.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes following sparse errors :

net/ipv4/fib_semantics.c:1579:61: warning: incorrect type in argument 2
(different base types)
net/ipv4/fib_semantics.c:1579:61:    expected unsigned int [unsigned]
[usertype] key
net/ipv4/fib_semantics.c:1579:61:    got restricted __be32 const
[usertype] nh_gw

Fixes: a6db4494 ("net: ipv4: Consider failed nexthops in multipath routes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Include ipv4_rcv_saddr_equal() definition to avoid this sparse error :

net/ipv4/udp.c:362:5: warning: symbol 'ipv4_rcv_saddr_equal' was not
declared. Should it be static?
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit 19689e38 ("tcp: md5: use kmalloc() backed scratch
areas") this function is no longer used.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An upcoming feature of IBM VNIC protocol is the ability to configure
redundant backing devices for a VNIC client. In case of a failure
on the current backing device, the driver will receive a signal
from the hypervisor indicating that a failover will occur. The driver
will then wait for a message from the backing device before
establishing a new connection.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It added reset function for RoCE driver. RoCE is a feature of hns.
In hip06 SoC, in RoCE reset process, it's needed to configure dsaf
channel reset, port and sl map info. Reset function of RoCE is
located in dsaf module, we only call it in RoCE driver when needed.

This patch is used to fix the conflict, please refer to this link:
  https://www.spinics.net/lists/linux-rdma/msg39114.htmlSigned-off-by: Wei Hu <xavier.huwei@huawei.com>
Signed-off-by: Nenglong Zhao <zhaonenglong@hisilicon.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Sheng Li <lisheng011@huawei.com>
Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Herbert Xu says:

====================
rhashtable: Get rid of raw table walkers part 1

This series starts the process of getting rid of all raw rhashtable
walkers (e.g., using any of the rht_for_each helpers) from the
kernel.

We need to do this before I can fix the resize kmalloc failure issue
by using multi-layered tables.

We should do this anyway because almost all raw table walkers are
already buggy in that they don't handle multiple rhashtables during
a resize.
====================

Dave/Tomas, please keep an eye out for any new patches that try
to introduce raw table walkers and nack them.
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch converts the diag dumping code to use the rhashtable
walk code instead of going through rhashtable by hand.  The lock
nl_table_lock is now only taken while we process the multicast
list as it's not needed for the rhashtable walk.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

As I'm working actively on rhashtable it helps if people CCed me
when they work on in.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit 8f6fd83c ("rhashtable:
accept GFP flags in rhashtable_walk_init") added a GFP flag argument
to rhashtable_walk_init because some users wish to use the walker
in an unsleepable context.

In fact we don't need to allocate memory in rhashtable_walk_init
at all.  The walker is always paired with an iterator so we could
just stash ourselves there.

This patch does that by introducing a new enter function to replace
the existing init function.  This way we don't have to churn all
the existing users again.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
crypto/chcr: Add support for Chelsio Crypto Driver

This patch series adds support for Chelsio Crypto driver.

The patch series has been created against net-next tree and includes
patches for Chelsio Low Level Driver(cxgb4) and adds the new crypto
Upper Layer Driver(chcr) under a new directory drivers/crypto/chelsio.

Patch 1/4 ("cxgb4: Add support for dynamic allocation of resources for
ULD") adds support for dynamic allocation of resources for ULD. The
objective of this patch is to provide generic interface for upper layer
drivers to allocate and initialize hardware resources.

The present cxgb4 (network driver) apart from network functionality, also
initializes hardware and thus acts as lower layer driver for other drivers
to use hardware resources. Thus it acts as both a Low level driver for
Upper layer driver's like iw_cxgb4, cxgb4i and cxgb4it and a Network Driver.

Right now the allocation of resources for Upper layer driver's is done
statically. Patch 1/4 adds a new infrastructure for dynamic allocation of
resources. cxgb4 will read the hardware capability through firmware and
allocate/free the queues for Upper layer drivers when the respective
driver's are loaded and freed when unloaded.

Patch 2/3, 3/4 and 4/4 adds support for Chelsio Crypto Driver. The Crypto
driver will act as another ULD on top of cxgb4.

In this patch series, the ULD API framework is used only by crypto and other
ULD's will make use of it in the next series.

This patch series is only for review, if this looks ok we will test it
thoroughly and send request for merge.

We have included all the maintainers of respective drivers. Kindly
review the changes and provide feedback on the same.

V3: - Removed crypto queues from cxgb4 and added support for dynamic
      allocation of resources for Upper layer drivers
    - Dependency fix in Kconfig.

V2: - Some residual code cleanup
    - Adds pr_fmt with chcr (KBUILD_MODNAME) added
    - Changes var name to accomodate them <80 columns in the chcr_register_alg
    - Support for printing the crypto queue stats
    - Fix compile warnings reported by kbuild bot for certain architectures
    - Dependency fix in Kconfig.
    - If the request has the MAY_BACKLOG bit set and hardware queue is
      full the request is queued up else -EBUSY is returned to throttle
      the user. The queue when executed and processed returns -EINPROGRESS
      in completion.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds the config entry for the Chelsio Crypto Driver, Makefile changes
for the same.
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Chelsio's Crypto Hardware can perform the following operations:
SHA1, SHA224, SHA256, SHA384 and SHA512, HMAC(SHA1), HMAC(SHA224),
HMAC(SHA256), HMAC(SHA384), HAMC(SHA512), AES-128-CBC, AES-192-CBC,
AES-256-CBC, AES-128-XTS, AES-256-XTS

This patch implements the driver for above mentioned features. This
driver is an Upper Layer Driver which is attached to Chelsio's LLD
(cxgb4) and uses the queue allocated by the LLD for sending the crypto
requests to the Hardware and receiving the responses from it.

The crypto operations can be performed by Chelsio's hardware from the
userspace applications and/or from within the kernel space using the
kernel's crypto API.

The above mentioned crypto features have been tested using kernel's
tests mentioned in testmgr.h. They also have been tested from user
space using libkcapi and Openssl.
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new commmon infrastructure to allocate reosurces dynamically to
Upper layer driver's(ULD) when they register with cxgb4 driver and free
them during unregistering. All the queues and the interrupts for
them will be allocated during ULD probe only and freed during remove.
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The data member of structure firmware is const and this constness is
dropped by some cast.
This patch add some const for keeping the const information.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
BPF helper improvements and cleanups

This set adds various improvements to BPF helpers, a cleanup to use
skb_pkt_type_ok() helper, addition of bpf_skb_change_tail(), a follow
up for event output helper and removing ifdefs around the cgroupv2
helper bits. For details please see individual patches.

The set is based against net-next tree, but requires a merge of net
into net-next first.

Thanks a lot!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

As recently discussed during the task_under_cgroup_hierarchy() addition,
we should get rid of the ifdefs surrounding the bpf_skb_under_cgroup()
helper. If related functionality is not built-in, the helper cannot be
used anyway, which is also in line with what we do for all other helpers.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Follow-up to 555c8a86 ("bpf: avoid stack copy and use skb ctx for
event output") for also adding the event output helper for XDP typed
programs. The event output helper has been very useful in particular for
debugging or event notification purposes, since it's much faster and
flexible than regular trace printk due to programmatically being able to
attach meta data. Same flags structure applies as with tc BPF programs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This work adds a bpf_skb_change_tail() helper for tc BPF programs. The
basic idea is to expand or shrink the skb in a controlled manner. The
eBPF program can then rewrite the rest via helpers like bpf_skb_store_bytes(),
bpf_lX_csum_replace() and others rather than passing a raw buffer for
writing here.

bpf_skb_change_tail() is really a slow path helper and intended for
replies with f.e. ICMP control messages. Concept is similar to other
helpers like bpf_skb_change_proto() helper to keep the helper without
protocol specifics and let the BPF program mangle the remaining parts.
A flags field has been added and is reserved for now should we extend
the helper in future.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since we have a skb_pkt_type_ok() helper for checking the type before
mangling, make use of it instead of open coding. Follow-up to commit
8b10cab6 ("net: simplify and make pkt_type_ok() available for other
users") that came in after d2485c42 ("bpf: add bpf_skb_change_type
helper").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add TIPC_NL_PEER_REMOVE netlink command. This command can remove
an offline peer node from the internal data structures.

This will be supported by the tipc user space tool in iproute2.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Over the years, TCP BDP has increased a lot, and is typically
in the order of ~10 Mbytes with help of clever Congestion Control
modules.

In presence of packet losses, TCP stores incoming packets into an out of
order queue, and number of skbs sitting there waiting for the missing
packets to be received can match the BDP (~10 Mbytes)

In some cases, TCP needs to make room for incoming skbs, and current
strategy can simply remove all skbs in the out of order queue as a last
resort, incurring a huge penalty, both for receiver and sender.

Unfortunately these 'last resort events' are quite frequent, forcing
sender to send all packets again, stalling the flow and wasting a lot of
resources.

This patch cleans only a part of the out of order queue in order
to meet the memory constraints.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: C. Stephen Gun <csg@google.com>
Cc: Van Jacobson <vanj@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It doesn't really change anything as BGMAC_CHIPCTL_1_IF_TYPE_RMII is
equal to 0. It make code a bit clener, so far when reading it one could
think we forgot to set a proper mode. It also keeps this mode code in
sync with other ones.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

BCM53573 is a new series of Broadcom's SoCs. It's based on ARM and can
be found in two packages (versions): BCM53573 and BCM47189. It shares
some code with the Northstar family, but also requires some new quirks.

First of all there can be up to 2 Ethernet cores on this SoC. If that is
the case, they are connected to two different switch ports allowing some
more complex/optimized setups. It seems the second unit doesn't come
fully configured and requires some IRQ quirk.

Other than that only the first core is connected to the PHY. For the
second one we have to register fixed PHY (similarly to the Northstar),
otherwise generic PHY driver would get some invalid info.

This has been successfully tested on Tenda AC9 (BCM47189B0).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

trivial fix to spelling mistake in dev_err message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is useful to be able to see the hash configuration when running tests.
This patch adds a debugfs node for that purpose.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The division is already being done properly in efx_ef10_get_timer_config
which returns zero-on-success, unlike the old efx_ef10_get_sysclk_freq.

Fixes: d95e329a ("sfc: get timer configuration from adapter")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While chasing tcp_xmit_retransmit_queue() kasan issue, I found
that we could avoid reading sacked field of skb that we wont send,
possibly removing one cache line miss.

Very minor change in slow path, but why not ? ;)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nikolay Aleksandrov says:

====================
net: bridge: export vlan stats per-port with flags

This set adds the ability to export vlan stats per-port. Patch 01 makes
that possible by consolidating the bridge and port linkxstats calls. Then
patch 02 allows to dump the vlan entry flags in order to be able to
distinguish between bridge and port vlan entries when dumping the master
device vlan stats. That is needed because that call was implemented when
the stats API didn't have slave dumping capabilities and it dumps all vlan
stats (for both bridge and port entries). We also need it in order to print
the vlan flags when dumping the stats.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Use one of the vlan xstats padding fields to export the vlan flags. This is
needed in order to be able to distinguish between master (bridge) and port
vlan entries in user-space when dumping the bridge vlan stats.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the bridge driver we usually have the same function working for both
port and bridge. In order to follow that logic and also avoid code
duplication, consolidate the bridge_ and brport_ linkxstats calls into
one since they share most of their code. As a side effect this allows us
to dump the vlan stats also via the slave call which is in preparation for
the upcoming per-port vlan stats and vlan flag dumping.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>