Prefetch work in mlx5_ib_prefetch_mr_work can be queued and able to run
concurrently with destruction of the implicit MR. The num_deferred_work
was intended to serialize this, but there is a race:

       CPU0                                          CPU1

    mlx5_ib_free_implicit_mr()
      xa_erase(odp_mkeys)
      synchronize_srcu()
      __xa_erase(implicit_children)
                                      mlx5_ib_prefetch_mr_work()
                                        pagefault_mr()
                                         pagefault_implicit_mr()
                                          implicit_get_child_mr()
                                           xa_cmpxchg()
                                        atomic_dec_and_test(num_deferred_mr)
      wait_event(imr->q_deferred_work)
      ib_umem_odp_release(odp_imr)
        kfree(odp_imr)

At this point in mlx5_ib_free_implicit_mr() the implicit_children list is
supposed to be empty forever so that destroy_unused_implicit_child_mr()
and related are not and will not be running.

Since it is not empty the destroy_unused_implicit_child_mr() flow ends up
touching deallocated memory as mlx5_ib_free_implicit_mr() already tore down the
imr parent.

The solution is to flush out the prefetch wq by driving num_deferred_work
to zero after creation of new prefetch work is blocked.

Fixes: 5256edcb ("RDMA/mlx5: Rework implicit ODP destroy")
Link: https://lore.kernel.org/r/20200719065435.130722-1-leon@kernel.orgSigned-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

cm.lock must be held while accessing remote_sidr_table. This fixes the
below NULL pointer dereference.

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP PTI
  CPU: 2 PID: 7288 Comm: udaddy Not tainted 5.7.0_for_upstream_perf_2020_06_09_15_14_20_38 #1
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
  RIP: 0010:rb_erase+0x10d/0x360
  Code: 00 00 00 48 89 c1 48 89 d0 48 8b 50 08 48 39 ca 74 48 f6 02 01 75 af 48 8b 7a 10 48 89 c1 48 83 c9 01 48 89 78 08 48 89 42 10 <48> 89 0f 48 8b 08 48 89 0a 48 83 e1 fc 48 89 10 0f 84 b1 00 00 00
  RSP: 0018:ffffc90000f77c30 EFLAGS: 00010086
  RAX: ffff8883df27d458 RBX: ffff8883df27da58 RCX: ffff8883df27d459
  RDX: ffff8883d183fa58 RSI: ffffffffa01e8d00 RDI: 0000000000000000
  RBP: ffff8883d62ac800 R08: 0000000000000000 R09: 00000000000000ce
  R10: 000000000000000a R11: 0000000000000000 R12: ffff8883df27da00
  R13: ffffc90000f77c98 R14: 0000000000000130 R15: 0000000000000000
  FS:  00007f009f877740(0000) GS:ffff8883f1a00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 00000003d467e003 CR4: 0000000000160ee0
  Call Trace:
   cm_send_sidr_rep_locked+0x15a/0x1a0 [ib_cm]
   ib_send_cm_sidr_rep+0x2b/0x50 [ib_cm]
   cma_send_sidr_rep+0x8b/0xe0 [rdma_cm]
   __rdma_accept+0x21d/0x2b0 [rdma_cm]
   ? ucma_get_ctx+0x2b/0xe0 [rdma_ucm]
   ? _copy_from_user+0x30/0x60
   ucma_accept+0x13e/0x1e0 [rdma_ucm]
   ucma_write+0xb4/0x130 [rdma_ucm]
   vfs_write+0xad/0x1a0
   ksys_write+0x9d/0xb0
   do_syscall_64+0x48/0x130
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f009ef60924
  Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 2a ef 2c 00 48 63 ff 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 55 53 48 89 d5 48 89 f3 48 83
  RSP: 002b:00007fff843edf38 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  RAX: ffffffffffffffda RBX: 000055743042e1d0 RCX: 00007f009ef60924
  RDX: 0000000000000130 RSI: 00007fff843edf40 RDI: 0000000000000003
  RBP: 00007fff843ee0e0 R08: 0000000000000000 R09: 0000557430433090
  R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000
  R13: 00007fff843edf40 R14: 000000000000038c R15: 00000000ffffff00
  CR2: 0000000000000000

Fixes: 6a8824a7 ("RDMA/cm: Allow ib_send_cm_sidr_rep() to be done under lock")
Link: https://lore.kernel.org/r/20200716105519.1424266-1-leon@kernel.orgSigned-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The FD should not be installed until all of the setup is completed as the
fd_install() transfers ownership of the kref to the FD table. A thread can
race a close() and trigger concurrent rdma_alloc_commit_uobject() and
uverbs_uobject_fd_release() which, at least, triggers a safety WARN_ON:

  WARNING: CPU: 4 PID: 6913 at drivers/infiniband/core/rdma_core.c:768 uverbs_uobject_fd_release+0x202/0x230
  Kernel panic - not syncing: panic_on_warn set ...
  CPU: 4 PID: 6913 Comm: syz-executor.3 Not tainted 5.7.0-rc2 #22
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
  [..]
  RIP: 0010:uverbs_uobject_fd_release+0x202/0x230
  Code: fe 4c 89 e7 e8 af 23 fe ff e9 2a ff ff ff e8 c5 fa 61 fe be 03 00 00 00 4c 89 e7 e8 68 eb f5 fe e9 13 ff ff ff e8 ae fa 61 fe <0f> 0b eb ac e8 e5 aa 3c fe e8 50 2b 86 fe e9 6a fe ff ff e8 46 2b
  RSP: 0018:ffffc90008117d88 EFLAGS: 00010293
  RAX: ffff88810e146580 RBX: 1ffff92001022fb1 RCX: ffffffff82d5b902
  RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88811951b040
  RBP: ffff88811951b000 R08: ffffed10232a3609 R09: ffffed10232a3609
  R10: ffff88811951b043 R11: 0000000000000001 R12: ffff888100a7c600
  R13: ffff888100a7c650 R14: ffffc90008117da8 R15: ffffffff82d5b700
   ? __uverbs_cleanup_ufile+0x270/0x270
   ? uverbs_uobject_fd_release+0x202/0x230
   ? uverbs_uobject_fd_release+0x202/0x230
   ? __uverbs_cleanup_ufile+0x270/0x270
   ? locks_remove_file+0x282/0x3d0
   ? security_file_free+0xaa/0xd0
   __fput+0x2be/0x770
   task_work_run+0x10e/0x1b0
   exit_to_usermode_loop+0x145/0x170
   do_syscall_64+0x2d0/0x390
   ? prepare_exit_to_usermode+0x17a/0x230
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x414da7
  Code: 00 00 0f 05 48 3d 00 f0 ff ff 77 3f f3 c3 0f 1f 44 00 00 53 89 fb 48 83 ec 10 e8 f4 fb ff ff 89 df 89 c2 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2b 89 d7 89 44 24 0c e8 36 fc ff ff 8b 44 24
  RSP: 002b:00007fff39d379d0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
  RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000414da7
  RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000003
  RBP: 00007fff39d37a3c R08: 0000000400000000 R09: 0000000400000000
  R10: 00007fff39d37910 R11: 0000000000000293 R12: 0000000000000001
  R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000003

Reorder so that fd_install() is the last thing done in
rdma_alloc_commit_uobject().

Fixes: aba94548 ("IB/uverbs: Move the FD uobj type struct file allocation to alloc_commit")
Link: https://lore.kernel.org/r/20200716102059.1420681-1-leon@kernel.orgSigned-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

ROCE uses "VA % buf_page_size" to caclulate the offset in the PBL's first
page, the actual PA corresponding to the MR's VA is equal to MR's PA plus
this offset. The first PA in PBL has already been aligned to PAGE_SIZE
after calling ib_umem_get(), but the MR's VA may not. If the buf_page_size
is smaller than the PAGE_SIZE, this will lead the HW to access the wrong
memory because the offset is smaller than expected.

Fixes: 9b2cf76c ("RDMA/hns: Optimize PBL buffer allocation process")
Link: https://lore.kernel.org/r/1594726935-45666-1-git-send-email-liweihang@huawei.comSigned-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The RoCE Engine will schedule to another QP after one has sent
(2 ^ lp_pktn_ini) packets. lp_pktn_ini is set in QPC and should be
calculated from 2 factors:

1. current MTU as a integer
2. the RoCE Engine's maximum slice length 64KB

But the driver use MTU as a enum ib_mtu and the max inline capability, the
lp_pktn_ini will be much bigger than expected which may cause traffic of
some QPs to never get scheduled.

Fixes: b713128d ("RDMA/hns: Adjust lp_pktn_ini dynamically")
Link: https://lore.kernel.org/r/1594726138-49294-1-git-send-email-liweihang@huawei.comSigned-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

SRQ table is accessed both from interrupt and process context,
therefore we must use xa_lock_irq.

   inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
   kworker/u17:9/8573   takes:
   ffff8883e3503d30 (&xa->xa_lock#13){?...}-{2:2}, at: mlx5_cmd_get_srq+0x18/0x70 [mlx5_ib]
   {IN-HARDIRQ-W} state was registered at:
     lock_acquire+0xb9/0x3a0
     _raw_spin_lock+0x25/0x30
     srq_event_notifier+0x2b/0xc0 [mlx5_ib]
     notifier_call_chain+0x45/0x70
     __atomic_notifier_call_chain+0x69/0x100
     forward_event+0x36/0xc0 [mlx5_core]
     notifier_call_chain+0x45/0x70
     __atomic_notifier_call_chain+0x69/0x100
     mlx5_eq_async_int+0xc5/0x160 [mlx5_core]
     notifier_call_chain+0x45/0x70
     __atomic_notifier_call_chain+0x69/0x100
     mlx5_irq_int_handler+0x19/0x30 [mlx5_core]
     __handle_irq_event_percpu+0x43/0x2a0
     handle_irq_event_percpu+0x30/0x70
     handle_irq_event+0x34/0x60
     handle_edge_irq+0x7c/0x1b0
     do_IRQ+0x60/0x110
     ret_from_intr+0x0/0x2a
     default_idle+0x34/0x160
     do_idle+0x1ec/0x220
     cpu_startup_entry+0x19/0x20
     start_secondary+0x153/0x1a0
     secondary_startup_64+0xa4/0xb0
   irq event stamp: 20907
   hardirqs last  enabled at (20907):   _raw_spin_unlock_irq+0x24/0x30
   hardirqs last disabled at (20906):   _raw_spin_lock_irq+0xf/0x40
   softirqs last  enabled at (20746):   __do_softirq+0x2c9/0x436
   softirqs last disabled at (20681):   irq_exit+0xb3/0xc0

   other info that might help us debug this:
    Possible unsafe locking scenario:

          CPU0
          ----
     lock(&xa->xa_lock#13);
     <Interrupt>
       lock(&xa->xa_lock#13);

    *** DEADLOCK ***

   2 locks held by kworker/u17:9/8573:
    #0: ffff888295218d38 ((wq_completion)mlx5_ib_page_fault){+.+.}-{0:0}, at: process_one_work+0x1f1/0x5f0
    #1: ffff888401647e78 ((work_completion)(&pfault->work)){+.+.}-{0:0}, at: process_one_work+0x1f1/0x5f0

   stack backtrace:
   CPU: 0 PID: 8573 Comm: kworker/u17:9 Tainted: GO      5.7.0_for_upstream_min_debug_2020_06_14_11_31_46_41 #1
   Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
   Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib]
   Call Trace:
    dump_stack+0x71/0x9b
    mark_lock+0x4f2/0x590
    ? print_shortest_lock_dependencies+0x200/0x200
    __lock_acquire+0xa00/0x1eb0
    lock_acquire+0xb9/0x3a0
    ? mlx5_cmd_get_srq+0x18/0x70 [mlx5_ib]
    _raw_spin_lock+0x25/0x30
    ? mlx5_cmd_get_srq+0x18/0x70 [mlx5_ib]
    mlx5_cmd_get_srq+0x18/0x70 [mlx5_ib]
    mlx5_ib_eqe_pf_action+0x257/0xa30 [mlx5_ib]
    ? process_one_work+0x209/0x5f0
    process_one_work+0x27b/0x5f0
    ? __schedule+0x280/0x7e0
    worker_thread+0x2d/0x3c0
    ? process_one_work+0x5f0/0x5f0
    kthread+0x111/0x130
    ? kthread_park+0x90/0x90
    ret_from_fork+0x24/0x30

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20200712102641.15210-1-leon@kernel.orgSigned-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Pull Xtensa fixes from Max Filippov:

 - fix __sync_fetch_and_{and,or}_4 declarations to avoid build warning

 - update *pos in cpuinfo_op.next to avoid runtime warning

 - use for_each_set_bit in xtensa_pmu_irq_handler instead of open-coding
   it

* tag 'xtensa-20200712' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: simplify xtensa_pmu_irq_handler
  xtensa: update *pos in cpuinfo_op.next
  xtensa: fix __sync_fetch_and_{and,or}_4 declarations

Pull io_uring fixes from Jens Axboe:
 "Two late fixes again:

   - Fix missing msg_name assignment in certain cases (Pavel)

   - Correct a previous fix for full coverage (Pavel)"

* tag 'io_uring-5.8-2020-07-12' of git://git.kernel.dk/linux-block:
  io_uring: fix not initialised work->flags
  io_uring: fix missing msg_name assignment

Pull btrfs fixes from David Sterba:
 "Two refcounting fixes and one prepartory patch for upcoming splice
  cleanup:

   - fix double put of block group with nodatacow

   - fix missing block group put when remounting with discard=async

   - explicitly set splice callback (no functional change), to ease
     integrating splice cleanup patches"

* tag 'for-5.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: wire up iter_file_splice_write
  btrfs: fix double put of block group with nocow
  btrfs: discard: add missing put when grabbing block group from unused list

59960b9d ("io_uring: fix lazy work init") tried to fix missing
io_req_init_async(), but left out work.flags and hash. Do it earlier.

Fixes: 7cdaf587 ("io_uring: avoid whole io_wq_work copy for requests completed inline")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Ensure to set msg.msg_name for the async portion of send/recvmsg,
as the header copy will copy to/from it.

Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull RISC-V fixes from Palmer Dabbelt:
 "I have a few KGDB-related fixes. They're mostly fixes for build
  warnings, but there's also:

   - Support for the qSupported and qXfer packets, which are necessary
     to pass around GDB XML information which we need for the RISC-V GDB
     port to fully function.

   - Users can now select STRICT_KERNEL_RWX instead of forcing it on"

* tag 'riscv-for-linus-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Avoid kgdb.h including gdb_xml.h to solve unused-const-variable warning
  kgdb: Move the extern declaration kgdb_has_hit_break() to generic kgdb.h
  riscv: Fix "no previous prototype" compile warning in kgdb.c file
  riscv: enable the Kconfig prompt of STRICT_KERNEL_RWX
  kgdb: enable arch to support XML packet.

Pull SCSI fixes from James Bottomley:
 "Five small fixes, four in driver and one in the SCSI Parallel
  transport, which fixes an incredibly old bug so I suspect no-one has
  actually used the functionality it fixes"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: dh: Add Fujitsu device to devinfo and dh lists
  scsi: mpt3sas: Fix error returns in BRM_status_show
  scsi: mpt3sas: Fix unlock imbalance
  scsi: iscsi: Change iSCSI workqueue max_active back to 1
  scsi: scsi_transport_spi: Fix function pointer check

Pull xen fix from Juergen Gross:
 "Just one fix of a recent patch (double free in an error path)"

* tag 'for-linus-5.8b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/xenbus: Fix a double free in xenbus_map_ring_pv()

Pull powerpc fix from Michael Ellerman:
 "One fix for a crash/soft lockup on Power8, caused by the exception
  rework we did in v5.7.

  Thanks to Paul Menzel and Nicholas Piggin"

* tag 'powerpc-5.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s/exception: Fix 0x1500 interrupt handler crash

Pull libnvdimm fix from Dan Williams:
 "A one-line Fix for key ring search permissions to address a regression
  from -rc1"

* tag 'libnvdimm-fix-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm/security: Fix key lookup permissions

Pull cifs fixes from Steve French:
 "Four cifs/smb3 fixes: the three for stable fix problems found recently
  with change notification including a reference count leak"

* tag '5.8-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number
  cifs: fix reference leak for tlink
  smb3: fix unneeded error message on change notify
  cifs: remove the retry in cifs_poxis_lock_set
  smb3: fix access denied on change notify request to some servers

Pull coding style terminology documentation from Dan Williams:
 "The discussion has tapered off as well as the incoming ack, review,
  and sign-off tags. I did not see a reason to wait for the next merge
  window"

* tag 'inclusive-terminology' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux:
  CodingStyle: Inclusive Terminology

Pull networking fixes from David Miller:

 1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking
    BPF programs, from Maciej Żenczykowski.

 2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu
    Mariappan.

 3) Slay memory leak in nl80211 bss color attribute parsing code, from
    Luca Coelho.

 4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin.

 5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric
    Dumazet.

 6) xsk code dips too deeply into DMA mapping implementation internals.
    Add dma_need_sync and use it. From Christoph Hellwig

 7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko.

 8) Check for disallowed attributes when loading flow dissector BPF
    programs. From Lorenz Bauer.

 9) Correct packet injection to L3 tunnel devices via AF_PACKET, from
    Jason A. Donenfeld.

10) Don't advertise checksum offload on ipa devices that don't support
    it. From Alex Elder.

11) Resolve several issues in TCP MD5 signature support. Missing memory
    barriers, bogus options emitted when using syncookies, and failure
    to allow md5 key changes in established states. All from Eric
    Dumazet.

12) Fix interface leak in hsr code, from Taehee Yoo.

13) VF reset fixes in hns3 driver, from Huazhong Tan.

14) Make loopback work again with ipv6 anycast, from David Ahern.

15) Fix TX starvation under high load in fec driver, from Tobias
    Waldekranz.

16) MLD2 payload lengths not checked properly in bridge multicast code,
    from Linus Lüssing.

17) Packet scheduler code that wants to find the inner protocol
    currently only works for one level of VLAN encapsulation. Allow
    Q-in-Q situations to work properly here, from Toke
    Høiland-Jørgensen.

18) Fix route leak in l2tp, from Xin Long.

19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport
    support and various protocols. From Martin KaFai Lau.

20) Fix socket cgroup v2 reference counting in some situations, from
    Cong Wang.

21) Cure memory leak in mlx5 connection tracking offload support, from
    Eli Britstein.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
  mlxsw: pci: Fix use-after-free in case of failed devlink reload
  mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON()
  net: macb: fix call to pm_runtime in the suspend/resume functions
  net: macb: fix macb_suspend() by removing call to netif_carrier_off()
  net: macb: fix macb_get/set_wol() when moving to phylink
  net: macb: mark device wake capable when "magic-packet" property present
  net: macb: fix wakeup test in runtime suspend/resume routines
  bnxt_en: fix NULL dereference in case SR-IOV configuration fails
  libbpf: Fix libbpf hashmap on (I)LP32 architectures
  net/mlx5e: CT: Fix memory leak in cleanup
  net/mlx5e: Fix port buffers cell size value
  net/mlx5e: Fix 50G per lane indication
  net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash
  net/mlx5e: Fix VXLAN configuration restore after function reload
  net/mlx5e: Fix usage of rcu-protected pointer
  net/mxl5e: Verify that rpriv is not NULL
  net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode
  net/mlx5: Fix eeprom support for SFP module
  cgroup: Fix sock_cgroup_data on big-endian.
  selftests: bpf: Fix detach from sockmap tests
  ...

CONFIG_CC_IS_GCC is undefined when Clang is used, which breaks the build
(see our Travis link below).

Clang 8 was chosen as a minimum version for this check because there
were some improvements around __builtin_constant_p in that release. In
reality, MIPS was not even buildable until clang 9 so that check was not
technically necessary. Just remove all compiler checks and just assume
that we have a working compiler.

Fixes: d4e60453 ("Restore gcc check in mips asm/unroll.h")
Link: https://travis-ci.com/github/ClangBuiltLinux/continuous-integration/jobs/359642821Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Ido Schimmel says:

====================
mlxsw: Various fixes

Fix two issues found by syzkaller.

Patch #1 removes inappropriate usage of WARN_ON() following memory
allocation failure. Constantly triggered when syzkaller injects faults.

Patch #2 fixes a use-after-free that can be triggered by 'devlink dev
info' following a failed devlink reload.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In case devlink reload failed, it is possible to trigger a
use-after-free when querying the kernel for device info via 'devlink dev
info' [1].

This happens because as part of the reload error path the PCI command
interface is de-initialized and its mailboxes are freed. When the
devlink '->info_get()' callback is invoked the device is queried via the
command interface and the freed mailboxes are accessed.

Fix this by initializing the command interface once during probe and not
during every reload.

This is consistent with the other bus used by mlxsw (i.e., 'mlxsw_i2c')
and also allows user space to query the running firmware version (for
example) from the device after a failed reload.

[1]
BUG: KASAN: use-after-free in memcpy include/linux/string.h:406 [inline]
BUG: KASAN: use-after-free in mlxsw_pci_cmd_exec+0x177/0xa60 drivers/net/ethernet/mellanox/mlxsw/pci.c:1675
Write of size 4096 at addr ffff88810ae32000 by task syz-executor.1/2355

CPU: 1 PID: 2355 Comm: syz-executor.1 Not tainted 5.8.0-rc2+ #29
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xf6/0x16e lib/dump_stack.c:118
 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383
 __kasan_report mm/kasan/report.c:513 [inline]
 kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
 check_memory_region_inline mm/kasan/generic.c:186 [inline]
 check_memory_region+0x14e/0x1b0 mm/kasan/generic.c:192
 memcpy+0x39/0x60 mm/kasan/common.c:106
 memcpy include/linux/string.h:406 [inline]
 mlxsw_pci_cmd_exec+0x177/0xa60 drivers/net/ethernet/mellanox/mlxsw/pci.c:1675
 mlxsw_cmd_exec+0x249/0x550 drivers/net/ethernet/mellanox/mlxsw/core.c:2335
 mlxsw_cmd_access_reg drivers/net/ethernet/mellanox/mlxsw/cmd.h:859 [inline]
 mlxsw_core_reg_access_cmd drivers/net/ethernet/mellanox/mlxsw/core.c:1938 [inline]
 mlxsw_core_reg_access+0x2f6/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1985
 mlxsw_reg_query drivers/net/ethernet/mellanox/mlxsw/core.c:2000 [inline]
 mlxsw_devlink_info_get+0x17f/0x6e0 drivers/net/ethernet/mellanox/mlxsw/core.c:1090
 devlink_nl_info_fill.constprop.0+0x13c/0x2d0 net/core/devlink.c:4588
 devlink_nl_cmd_info_get_dumpit+0x246/0x460 net/core/devlink.c:4648
 genl_lock_dumpit+0x85/0xc0 net/netlink/genetlink.c:575
 netlink_dump+0x515/0xe50 net/netlink/af_netlink.c:2245
 __netlink_dump_start+0x53d/0x830 net/netlink/af_netlink.c:2353
 genl_family_rcv_msg_dumpit.isra.0+0x296/0x300 net/netlink/genetlink.c:638
 genl_family_rcv_msg net/netlink/genetlink.c:733 [inline]
 genl_rcv_msg+0x78d/0x9d0 net/netlink/genetlink.c:753
 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469
 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764
 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
 netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329
 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0x150/0x190 net/socket.c:672
 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363
 ___sys_sendmsg+0xff/0x170 net/socket.c:2417
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450
 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: a9c8336f ("mlxsw: core: Add support for devlink info command")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should not trigger a warning when a memory allocation fails. Remove
the WARN_ON().

The warning is constantly triggered by syzkaller when it is injecting
faults:

[ 2230.758664] FAULT_INJECTION: forcing a failure.
[ 2230.758664] name failslab, interval 1, probability 0, space 0, times 0
[ 2230.762329] CPU: 3 PID: 1407 Comm: syz-executor.0 Not tainted 5.8.0-rc2+ #28
...
[ 2230.898175] WARNING: CPU: 3 PID: 1407 at drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:6265 mlxsw_sp_router_fib_event+0xfad/0x13e0
[ 2230.898179] Kernel panic - not syncing: panic_on_warn set ...
[ 2230.898183] CPU: 3 PID: 1407 Comm: syz-executor.0 Not tainted 5.8.0-rc2+ #28
[ 2230.898190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014

Fixes: 3057224e ("mlxsw: spectrum_router: Implement FIB offload in deferred work")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nicolas Ferre says:

====================
net: macb: Wake-on-Lan magic packet fixes and GEM handling

Here is a split series to fix WoL magic-packet on the current macb driver. Only
fixes in this one based on current net/master.

Changes in v5:
- Addressed the error code returned by phylink_ethtool_set_wol() as suggested
  by Russell.
  If PHY handles WoL, MAC doesn't stay in the way.
- Removed Florian's tag on 3/5 because of the above changes.
- Correct the "Fixes" tag on 1/5.

Changes in v4:
- Pure bug fix series for 'net'. GEM addition and MACB update removed: will be
  sent later.

Changes in v3:
- Revert some of the v2 changes done in macb_resume(). Now the resume function
  supports in-depth re-configuration of the controller in order to deal with
  deeper sleep states. Basically as it was before changes introduced by this
  series
- Tested for non-regression with our deeper Power Management mode which cuts
  power to the controller completely

Changes in v2:
- Add patch 4/7 ("net: macb: fix macb_suspend() by removing call to netif_carrier_off()")
  needed for keeping phy state consistent
- Add patch 5/7 ("net: macb: fix call to pm_runtime in the suspend/resume functions") that prevent
  putting the macb in runtime pm suspend mode when WoL is used
- Collect review tags on 3 first patches from Florian: Thanks!
- Review of macb_resume() function
- Addition of pm_wakeup_event() in both MACB and GEM WoL IRQ handlers
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The calls to pm_runtime_force_suspend/resume() functions are only
relevant if the device is not configured to act as a WoL wakeup source.
Add the device_may_wakeup() test before calling them.

Fixes: 3e2a5e15 ("net: macb: add wake-on-lan support via magic packet")
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Harini Katakam <harini.katakam@xilinx.com>
Cc: Sergio Prado <sergio.prado@e-labworks.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As we now use the phylink call to phylink_stop() in the non-WoL path,
there is no need for this call to netif_carrier_off() anymore. It can
disturb the underlying phylink FSM.

Fixes: 7897b071 ("net: macb: convert to phylink")
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Harini Katakam <harini.katakam@xilinx.com>
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Keep previous function goals and integrate phylink actions to them.

phylink_ethtool_get_wol() is not enough to figure out if Ethernet driver
supports Wake-on-Lan.
Initialization of "supported" and "wolopts" members is done in phylink
function, no need to keep them in calling function.

phylink_ethtool_set_wol() return value is considered and determines
if the MAC has to handle WoL or not. The case where the PHY doesn't
implement WoL leads to the MAC configuring it to provide this feature.

Fixes: 7897b071 ("net: macb: convert to phylink")
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Harini Katakam <harini.katakam@xilinx.com>
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change the way the "magic-packet" DT property is handled in the
macb_probe() function, matching DT binding documentation.
Now we mark the device as "wakeup capable" instead of calling the
device_init_wakeup() function that would enable the wakeup source.

For Ethernet WoL, enabling the wakeup_source is done by
using ethtool and associated macb_set_wol() function that
already calls device_set_wakeup_enable() for this purpose.

That would reduce power consumption by cutting more clocks if
"magic-packet" property is set but WoL is not configured by ethtool.

Fixes: 3e2a5e15 ("net: macb: add wake-on-lan support via magic packet")
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Harini Katakam <harini.katakam@xilinx.com>
Cc: Sergio Prado <sergio.prado@e-labworks.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the proper struct device pointer to check if the wakeup flag
and wakeup source are positioned.
Use the one passed by function call which is equivalent to
&bp->dev->dev.parent.

It's preventing the trigger of a spurious interrupt in case the
Wake-on-Lan feature is used.

Fixes: d54f89af ("net: macb: Add pm runtime support")
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Harini Katakam <harini.katakam@xilinx.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

we need to set 'active_vfs' back to 0, if something goes wrong during the
allocation of SR-IOV resources: otherwise, further VF configurations will
wrongly assume that bp->pf.vf[x] are valid memory locations, and commands
like the ones in the following sequence:

 # echo 2 >/sys/bus/pci/devices/${ADDR}/sriov_numvfs
 # ip link set dev ens1f0np0 up
 # ip link set dev ens1f0np0 vf 0 trust on

will cause a kernel crash similar to this:

 bnxt_en 0000:3b:00.0: not enough MMIO resources for SR-IOV
 BUG: kernel NULL pointer dereference, address: 0000000000000014
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI
 CPU: 43 PID: 2059 Comm: ip Tainted: G          I       5.8.0-rc2.upstream+ #871
 Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 2.2.11 06/13/2019
 RIP: 0010:bnxt_set_vf_trust+0x5b/0x110 [bnxt_en]
 Code: 44 24 58 31 c0 e8 f5 fb ff ff 85 c0 0f 85 b6 00 00 00 48 8d 1c 5b 41 89 c6 b9 0b 00 00 00 48 c1 e3 04 49 03 9c 24 f0 0e 00 00 <8b> 43 14 89 c2 83 c8 10 83 e2 ef 45 84 ed 49 89 e5 0f 44 c2 4c 89
 RSP: 0018:ffffac6246a1f570 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000b
 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff98b28f538900
 RBP: ffff98b28f538900 R08: 0000000000000000 R09: 0000000000000008
 R10: ffffffffb9515be0 R11: ffffac6246a1f678 R12: ffff98b28f538000
 R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffc05451e0
 FS:  00007fde0f688800(0000) GS:ffff98baffd40000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000014 CR3: 000000104bb0a003 CR4: 00000000007606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 PKRU: 55555554
 Call Trace:
  do_setlink+0x994/0xfe0
  __rtnl_newlink+0x544/0x8d0
  rtnl_newlink+0x47/0x70
  rtnetlink_rcv_msg+0x29f/0x350
  netlink_rcv_skb+0x4a/0x110
  netlink_unicast+0x21d/0x300
  netlink_sendmsg+0x329/0x450
  sock_sendmsg+0x5b/0x60
  ____sys_sendmsg+0x204/0x280
  ___sys_sendmsg+0x88/0xd0
  __sys_sendmsg+0x5e/0xa0
  do_syscall_64+0x47/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Reported-by: Fei Liu <feliu@redhat.com>
CC: Jonathan Toppins <jtoppins@redhat.com>
CC: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf 2020-07-09

The following pull-request contains BPF updates for your *net* tree.

We've added 4 non-merge commits during the last 1 day(s) which contain
a total of 4 files changed, 26 insertions(+), 15 deletions(-).

The main changes are:

1) fix crash in libbpf on 32-bit archs, from Jakub and Andrii.

2) fix crash when l2tp and bpf_sk_reuseport conflict, from Martin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5 fixes 2020-07-02

This series introduces some fixes to mlx5 driver.

V1->v2:
 - Drop "ip -s" patch and mirred device hold reference patch.
 - Will revise them in a later submission.

Please pull and let me know if there is any problem.

For -stable v5.2
 ('net/mlx5: Fix eeprom support for SFP module')

For -stable v5.4
 ('net/mlx5e: Fix 50G per lane indication')

For -stable v5.5
 ('net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash')
 ('net/mlx5e: Fix VXLAN configuration restore after function reload')

For -stable v5.7
 ('net/mlx5e: CT: Fix memory leak in cleanup')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull rdma fixes from Jason Gunthorpe:
 "Small update, a few more merge window bugs and normal driver bug
  fixes:

   - Two merge window regressions in mlx5: a error path bug found by
     syzkaller and some lost code during a rework preventing ipoib from
     working in some configurations

   - Silence clang compilation warning in OPA related code

   - Fix a long standing race condition in ib_nl for ACM

   - Resolve when the HFI1 is shutdown"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/mlx5: Set PD pointers for the error flow unwind
  IB/mlx5: Fix 50G per lane indication
  RDMA/siw: Fix reporting vendor_part_id
  IB/sa: Resolv use-after-free in ib_nl_make_request()
  IB/hfi1: Do not destroy link_wq when the device is shut down
  IB/hfi1: Do not destroy hfi1_wq when the device is shut down
  RDMA/mlx5: Fix legacy IPoIB QP initialization
  IB/hfi1: Add explicit cast OPA_MTU_8192 to 'enum ib_mtu'

Merge tag 'linux-kselftest-fixes-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "TPM2 test changes to run on python3 and kselftest framework fix to
  incorrect return type"

* tag 'linux-kselftest-fixes-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kselftest: ksft_test_num return type should be unsigned
  selftests: tpm: upgrade TPM2 tests from Python 2 to Python 3

Pull io_uring fixes from Jens Axboe:

 - Fix memleak for error path in registered files (Yang)

 - Export CQ overflow state in flags, necessary to fix a case where
   liburing doesn't know if it needs to enter the kernel (Xiaoguang)

 - Fix for a regression in when user memory is accounted freed, causing
   issues with back-to-back ring exit + init if the ulimit -l setting is
   very tight.

* tag 'io_uring-5.8-2020-07-10' of git://git.kernel.dk/linux-block:
  io_uring: account user memory freed when exit has been queued
  io_uring: fix memleak in io_sqe_files_register()
  io_uring: fix memleak in __io_sqe_files_update()
  io_uring: export cq overflow status to userspace

Pull block fixes from Jens Axboe:

 - Fix for inflight accounting, which affects only dm (Ming)

 - Fix documentation error for bfq (Yufen)

 - Fix memory leak for nbd (Zheng)

* tag 'block-5.8-2020-07-10' of git://git.kernel.dk/linux-block:
  nbd: Fix memory leak in nbd_add_socket
  blk-mq: consider non-idle request as "inflight" in blk_mq_rq_inflight()
  docs: block: update and fix tiny error for bfq

Pull in-kernel read and write op cleanups from Christoph Hellwig:
 "Cleanup in-kernel read and write operations

  Reshuffle the (__)kernel_read and (__)kernel_write helpers, and ensure
  all users of in-kernel file I/O use them if they don't use iov_iter
  based methods already.

  The new WARN_ONs in combination with syzcaller already found a missing
  input validation in 9p. The fix should be on your way through the
  maintainer ASAP".

[ This is prep-work for the real changes coming 5.9 ]

* tag 'cleanup-kernel_read_write' of git://git.infradead.org/users/hch/misc:
  fs: remove __vfs_read
  fs: implement kernel_read using __kernel_read
  integrity/ima: switch to using __kernel_read
  fs: add a __kernel_read helper
  fs: remove __vfs_write
  fs: implement kernel_write using __kernel_write
  fs: check FMODE_WRITE in __kernel_write
  fs: unexport __kernel_write
  bpfilter: switch to kernel_write
  autofs: switch to kernel_write
  cachefiles: switch to kernel_write

Pull dma-mapping fixes from Christoph Hellwig:

 - add a warning when the atomic pool is depleted (David Rientjes)

 - protect the parameters of the new scatterlist helper macros (Marek
   Szyprowski )

* tag 'dma-mapping-5.8-5' of git://git.infradead.org/users/hch/dma-mapping:
  scatterlist: protect parameters of the sg_table related macros
  dma-mapping: warn when coherent pool is depleted

Pull pin control fixes from Linus Walleij:

 - Fix an issue in the AMD driver for the UART0 group

 - Fix a glitch issue in the Baytrail pin controller

* tag 'pinctrl-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: baytrail: Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH)
  pinctrl: amd: fix npins for uart0 in kerncz_groups