Skip to content

L
linux
Switch branch/tag
  1. 19 Aug, 2021 4 commits
    • Hayes Wang's avatar
      r8152: fix writing USB_BP2_EN · a876a33d
      Hayes Wang authored 
      The register of USB_BP2_EN is 16 bits, so we should use
ocp_write_word(), not ocp_write_byte().

Fixes: 9370f2d0 ("support request_firmware for RTL8153")
Signed-off-by: default avatarHayes Wang <hayeswang@realtek.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a876a33d
    • David S. Miller's avatar
      Merge branch 'mptcp-fixes' · d98c8210
      David S. Miller authored 
      Mat Martineau says:

====================
mptcp: Bug fixes

Here are two bug fixes for the net tree:

Patch 1 fixes a memory leak that could be encountered when clearing the
list of advertised MPTCP addresses.

Patch 2 fixes a protocol issue early in an MPTCP connection, to ensure
both peers correctly understand that the full MPTCP connection handshake
has completed even when the server side quickly sends an ADD_ADDR
option.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d98c8210
    • Matthieu Baerts's avatar
      mptcp: full fully established support after ADD_ADDR · 67b12f79
      Matthieu Baerts authored 
      If directly after an MP_CAPABLE 3WHS, the client receives an ADD_ADDR
with HMAC from the server, it is enough to switch to a "fully
established" mode because it has received more MPTCP options.

It was then OK to enable the "fully_established" flag on the MPTCP
socket. Still, best to check if the ADD_ADDR looks valid by looking if
it contains an HMAC (no 'echo' bit). If an ADD_ADDR echo is received
while we are not in "fully established" mode, it is strange and then
we should not switch to this mode now.

But that is not enough. On one hand, the path-manager has be notified
the state has changed. On the other hand, the "fully_established" flag
on the subflow socket should be turned on as well not to re-send the
MP_CAPABLE 3rd ACK content with the next ACK.

Fixes: 84dfe367 ("mptcp: send out dedicated ADD_ADDR packet")
Signed-off-by: default avatarMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      67b12f79
    • Paolo Abeni's avatar
      mptcp: fix memory leak on address flush · a0eea5f1
      Paolo Abeni authored 
      The endpoint cleanup path is prone to a memory leak, as reported
by syzkaller:

 BUG: memory leak
 unreferenced object 0xffff88810680ea00 (size 64):
   comm "syz-executor.6", pid 6191, jiffies 4295756280 (age 24.138s)
   hex dump (first 32 bytes):
     58 75 7d 3c 80 88 ff ff 22 01 00 00 00 00 ad de  Xu}<....".......
     01 00 02 00 00 00 00 00 ac 1e 00 07 00 00 00 00  ................
   backtrace:
     [<0000000072a9f72a>] kmalloc include/linux/slab.h:591 [inline]
     [<0000000072a9f72a>] mptcp_nl_cmd_add_addr+0x287/0x9f0 net/mptcp/pm_netlink.c:1170
     [<00000000f6e931bf>] genl_family_rcv_msg_doit.isra.0+0x225/0x340 net/netlink/genetlink.c:731
     [<00000000f1504a2c>] genl_family_rcv_msg net/netlink/genetlink.c:775 [inline]
     [<00000000f1504a2c>] genl_rcv_msg+0x341/0x5b0 net/netlink/genetlink.c:792
     [<0000000097e76f6a>] netlink_rcv_skb+0x148/0x430 net/netlink/af_netlink.c:2504
     [<00000000ceefa2b8>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:803
     [<000000008ff91aec>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
     [<000000008ff91aec>] netlink_unicast+0x537/0x750 net/netlink/af_netlink.c:1340
     [<0000000041682c35>] netlink_sendmsg+0x846/0xd80 net/netlink/af_netlink.c:1929
     [<00000000df3aa8e7>] sock_sendmsg_nosec net/socket.c:704 [inline]
     [<00000000df3aa8e7>] sock_sendmsg+0x14e/0x190 net/socket.c:724
     [<000000002154c54c>] ____sys_sendmsg+0x709/0x870 net/socket.c:2403
     [<000000001aab01d7>] ___sys_sendmsg+0xff/0x170 net/socket.c:2457
     [<00000000fa3b1446>] __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486
     [<00000000db2ee9c7>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
     [<00000000db2ee9c7>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
     [<000000005873517d>] entry_SYSCALL_64_after_hwframe+0x44/0xae

We should not require an allocation to cleanup stuff.

Rework the code a bit so that the additional RCU work is no more needed.

Fixes: 1729cf18 ("mptcp: create the listening socket for new port")
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a0eea5f1
  3. 18 Aug, 2021 11 commits
  5. 17 Aug, 2021 4 commits
  7. 16 Aug, 2021 10 commits
    • Lahav Schlesinger's avatar
      vrf: Reset skb conntrack connection on VRF rcv · 09e856d5
      Lahav Schlesinger authored 
      To fix the "reverse-NAT" for replies.

When a packet is sent over a VRF, the POST_ROUTING hooks are called
twice: Once from the VRF interface, and once from the "actual"
interface the packet will be sent from:
1) First SNAT: l3mdev_l3_out() -> vrf_l3_out() -> .. -> vrf_output_direct()
     This causes the POST_ROUTING hooks to run.
2) Second SNAT: 'ip_output()' calls POST_ROUTING hooks again.

Similarly for replies, first ip_rcv() calls PRE_ROUTING hooks, and
second vrf_l3_rcv() calls them again.

As an example, consider the following SNAT rule:
> iptables -t nat -A POSTROUTING -p udp -m udp --dport 53 -j SNAT --to-source 2.2.2.2 -o vrf_1

In this case sending over a VRF will create 2 conntrack entries.
The first is from the VRF interface, which performs the IP SNAT.
The second will run the SNAT, but since the "expected reply" will remain
the same, conntrack randomizes the source port of the packet:
e..g With a socket bound to 1.1.1.1:10000, sending to 3.3.3.3:53, the conntrack
rules are:
udp      17 29 src=2.2.2.2 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 [UNREPLIED] src=3.3.3.3 dst=2.2.2.2 sport=53 dport=61033 packets=0 bytes=0 mark=0 use=1
udp      17 29 src=1.1.1.1 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 [UNREPLIED] src=3.3.3.3 dst=2.2.2.2 sport=53 dport=10000 packets=0 bytes=0 mark=0 use=1

i.e. First SNAT IP from 1.1.1.1 --> 2.2.2.2, and second the src port is
SNAT-ed from 10000 --> 61033.

But when a reply is sent (3.3.3.3:53 -> 2.2.2.2:61033) only the later
conntrack entry is matched:
udp      17 29 src=2.2.2.2 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 src=3.3.3.3 dst=2.2.2.2 sport=53 dport=61033 packets=1 bytes=49 mark=0 use=1
udp      17 28 src=1.1.1.1 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 [UNREPLIED] src=3.3.3.3 dst=2.2.2.2 sport=53 dport=10000 packets=0 bytes=0 mark=0 use=1

And a "port 61033 unreachable" ICMP packet is sent back.

The issue is that when PRE_ROUTING hooks are called from vrf_l3_rcv(),
the skb already has a conntrack flow attached to it, which means
nf_conntrack_in() will not resolve the flow again.

This means only the dest port is "reverse-NATed" (61033 -> 10000) but
the dest IP remains 2.2.2.2, and since the socket is bound to 1.1.1.1 it's
not received.
This can be verified by logging the 4-tuple of the packet in '__udp4_lib_rcv()'.

The fix is then to reset the flow when skb is received on a VRF, to let
conntrack resolve the flow again (which now will hit the earlier flow).

To reproduce: (Without the fix "Got pkt_to_nat_port" will not be printed by
  running 'bash ./repro'):
  $ cat run_in_A1.py
  import logging
  logging.getLogger("scapy.runtime").setLevel(logging.ERROR)
  from scapy.all import *
  import argparse

  def get_packet_to_send(udp_dst_port, msg_name):
      return Ether(src='11:22:33:44:55:66', dst=iface_mac)/ \
          IP(src='3.3.3.3', dst='2.2.2.2')/ \
          UDP(sport=53, dport=udp_dst_port)/ \
          Raw(f'{msg_name}\x0012345678901234567890')

  parser = argparse.ArgumentParser()
  parser.add_argument('-iface_mac', dest="iface_mac", type=str, required=True,
                      help="From run_in_A3.py")
  parser.add_argument('-socket_port', dest="socket_port", type=str,
                      required=True, help="From run_in_A3.py")
  parser.add_argument('-v1_mac', dest="v1_mac", type=str, required=True,
                      help="From script")

  args, _ = parser.parse_known_args()
  iface_mac = args.iface_mac
  socket_port = int(args.socket_port)
  v1_mac = args.v1_mac

  print(f'Source port before NAT: {socket_port}')

  while True:
      pkts = sniff(iface='_v0', store=True, count=1, timeout=10)
      if 0 == len(pkts):
          print('Something failed, rerun the script :(', flush=True)
          break
      pkt = pkts[0]
      if not pkt.haslayer('UDP'):
          continue

      pkt_sport = pkt.getlayer('UDP').sport
      print(f'Source port after NAT: {pkt_sport}', flush=True)

      pkt_to_send = get_packet_to_send(pkt_sport, 'pkt_to_nat_port')
      sendp(pkt_to_send, '_v0', verbose=False) # Will not be received

      pkt_to_send = get_packet_to_send(socket_port, 'pkt_to_socket_port')
      sendp(pkt_to_send, '_v0', verbose=False)
      break

  $ cat run_in_A2.py
  import socket
  import netifaces

  print(f"{netifaces.ifaddresses('e00000')[netifaces.AF_LINK][0]['addr']}",
        flush=True)
  s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
  s.setsockopt(socket.SOL_SOCKET, socket.SO_BINDTODEVICE,
               str('vrf_1' + '\0').encode('utf-8'))
  s.connect(('3.3.3.3', 53))
  print(f'{s. getsockname()[1]}', flush=True)
  s.settimeout(5)

  while True:
      try:
          # Periodically send in order to keep the conntrack entry alive.
          s.send(b'a'*40)
          resp = s.recvfrom(1024)
          msg_name = resp[0].decode('utf-8').split('\0')[0]
          print(f"Got {msg_name}", flush=True)
      except Exception as e:
          pass

  $ cat repro.sh
  ip netns del A1 2> /dev/null
  ip netns del A2 2> /dev/null
  ip netns add A1
  ip netns add A2

  ip -n A1 link add _v0 type veth peer name _v1 netns A2
  ip -n A1 link set _v0 up

  ip -n A2 link add e00000 type bond
  ip -n A2 link add lo0 type dummy
  ip -n A2 link add vrf_1 type vrf table 10001
  ip -n A2 link set vrf_1 up
  ip -n A2 link set e00000 master vrf_1

  ip -n A2 addr add 1.1.1.1/24 dev e00000
  ip -n A2 link set e00000 up
  ip -n A2 link set _v1 master e00000
  ip -n A2 link set _v1 up
  ip -n A2 link set lo0 up
  ip -n A2 addr add 2.2.2.2/32 dev lo0

  ip -n A2 neigh add 1.1.1.10 lladdr 77:77:77:77:77:77 dev e00000
  ip -n A2 route add 3.3.3.3/32 via 1.1.1.10 dev e00000 table 10001

  ip netns exec A2 iptables -t nat -A POSTROUTING -p udp -m udp --dport 53 -j \
	SNAT --to-source 2.2.2.2 -o vrf_1

  sleep 5
  ip netns exec A2 python3 run_in_A2.py > x &
  XPID=$!
  sleep 5

  IFACE_MAC=`sed -n 1p x`
  SOCKET_PORT=`sed -n 2p x`
  V1_MAC=`ip -n A2 link show _v1 | sed -n 2p | awk '{print $2'}`
  ip netns exec A1 python3 run_in_A1.py -iface_mac ${IFACE_MAC} -socket_port \
          ${SOCKET_PORT} -v1_mac ${SOCKET_PORT}
  sleep 5

  kill -9 $XPID
  wait $XPID 2> /dev/null
  ip netns del A1
  ip netns del A2
  tail x -n 2
  rm x
  set +x

Fixes: 73e20b76 ("net: vrf: Add support for PREROUTING rules on vrf device")
Signed-off-by: default avatarLahav Schlesinger <lschlesinger@drivenets.com>
Reviewed-by: default avatarDavid Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210815120002.2787653-1-lschlesinger@drivenets.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      09e856d5
    • Dan Carpenter's avatar
      net: iosm: Prevent underflow in ipc_chnl_cfg_get() · 4f3f2e3f
      Dan Carpenter authored 
      The bounds check on "index" doesn't catch negative values.  Using
ARRAY_SIZE() directly is more readable and more robust because it prevents
negative values for "index".  Fortunately we only pass valid values to
ipc_chnl_cfg_get() so this patch does not affect runtime.
Reported-by: default avatarSolomon Ucko <solly.ucko@gmail.com>
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: default avatarM Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4f3f2e3f
    • David S. Miller's avatar
      Merge branch 'bnxt_en-fixes' · 517c54d2
      David S. Miller authored 
      Michael Chan says:

====================
bnxt_en: 2 bug fixes

The first one disables aRFS/NTUPLE on an older broken firmware version.
The second one adds missing memory barriers related to completion ring
handling.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      517c54d2
    • Michael Chan's avatar
      bnxt_en: Add missing DMA memory barriers · 828affc2
      Michael Chan authored 
      Each completion ring entry has a valid bit to indicate that the entry
contains a valid completion event.  The driver's main poll loop
__bnxt_poll_work() has the proper dma_rmb() to make sure the valid
bit of the next entry has been checked before proceeding further.
But when we call bnxt_rx_pkt() to process the RX event, the RX
completion event consists of two completion entries and only the
first entry has been checked to be valid.  We need the same barrier
after checking the next completion entry.  Add missing dma_rmb()
barriers in bnxt_rx_pkt() and other similar locations.

Fixes: 67a95e20 ("bnxt_en: Need memory barrier when processing the completion ring.")
Reported-by: default avatarLance Richardson <lance.richardson@broadcom.com>
Reviewed-by: default avatarAndy Gospodarek <gospo@broadcom.com>
Reviewed-by: default avatarLance Richardson <lance.richardson@broadcom.com>
Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      828affc2
    • Michael Chan's avatar
      bnxt_en: Disable aRFS if running on 212 firmware · 976e52b7
      Michael Chan authored 
      212 firmware broke aRFS, so disable it.  Traffic may stop after ntuple
filters are inserted and deleted by the 212 firmware.

Fixes: ae10ae74 ("bnxt_en: Add new hardware RFS mode.")
Reviewed-by: default avatarPavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      976e52b7
    • Shai Malin's avatar
      qed: Fix null-pointer dereference in qed_rdma_create_qp() · d33d19d3
      Shai Malin authored 
      Fix a possible null-pointer dereference in qed_rdma_create_qp().

Changes from V2:
- Revert checkpatch fixes.
Reported-by: default avatarTOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: default avatarAriel Elior <aelior@marvell.com>
Signed-off-by: default avatarShai Malin <smalin@marvell.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d33d19d3
    • Shai Malin's avatar
      qed: qed ll2 race condition fixes · 37110237
      Shai Malin authored 
      Avoiding qed ll2 race condition and NULL pointer dereference as part
of the remove and recovery flows.

Changes form V1:
- Change (!p_rx->set_prod_addr).
- qed_ll2.c checkpatch fixes.

Change from V2:
- Revert "qed_ll2.c checkpatch fixes".
Signed-off-by: default avatarAriel Elior <aelior@marvell.com>
Signed-off-by: default avatarShai Malin <smalin@marvell.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      37110237
    • Xin Long's avatar
      tipc: call tipc_wait_for_connect only when dlen is not 0 · 7387a72c
      Xin Long authored 
      __tipc_sendmsg() is called to send SYN packet by either tipc_sendmsg()
or tipc_connect(). The difference is in tipc_connect(), it will call
tipc_wait_for_connect() after __tipc_sendmsg() to wait until connecting
is done. So there's no need to wait in __tipc_sendmsg() for this case.

This patch is to fix it by calling tipc_wait_for_connect() only when dlen
is not 0 in __tipc_sendmsg(), which means it's called by tipc_connect().

Note this also fixes the failure in tipcutils/test/ptts/:

  # ./tipcTS &
  # ./tipcTC 9
  (hang)

Fixes: 36239dab6da7 ("tipc: fix implicit-connect for SYN+")
Reported-by: default avatarShuang Li <shuali@redhat.com>
Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
Acked-by: default avatarJon Maloy <jmaloy@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7387a72c
    • Andy Shevchenko's avatar
      ptp_pch: Restore dependency on PCI · 55c8fca1
      Andy Shevchenko authored 
      During the swap dependency on PCH_GBE to selection PTP_1588_CLOCK_PCH
incidentally dropped the implicit dependency on the PCI. Restore it.

Fixes: 18d359ce ("pch_gbe, ptp_pch: Fix the dependency direction between these drivers")
Reported-by: default avatarkernel test robot <lkp@intel.com>
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      55c8fca1
    • Pavel Skripkin's avatar
      net: 6pack: fix slab-out-of-bounds in decode_data · 19d1532a
      Pavel Skripkin authored 
      Syzbot reported slab-out-of bounds write in decode_data().
The problem was in missing validation checks.

Syzbot's reproducer generated malicious input, which caused
decode_data() to be called a lot in sixpack_decode(). Since
rx_count_cooked is only 400 bytes and noone reported before,
that 400 bytes is not enough, let's just check if input is malicious
and complain about buffer overrun.

Fail log:
==================================================================
BUG: KASAN: slab-out-of-bounds in drivers/net/hamradio/6pack.c:843
Write of size 1 at addr ffff888087c5544e by task kworker/u4:0/7

CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.6.0-rc3-syzkaller #0
...
Workqueue: events_unbound flush_to_ldisc
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x197/0x210 lib/dump_stack.c:118
 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
 __kasan_report.cold+0x1b/0x32 mm/kasan/report.c:506
 kasan_report+0x12/0x20 mm/kasan/common.c:641
 __asan_report_store1_noabort+0x17/0x20 mm/kasan/generic_report.c:137
 decode_data.part.0+0x23b/0x270 drivers/net/hamradio/6pack.c:843
 decode_data drivers/net/hamradio/6pack.c:965 [inline]
 sixpack_decode drivers/net/hamradio/6pack.c:968 [inline]

Reported-and-tested-by: syzbot+fc8cd9a673d4577fb2e4@syzkaller.appspotmail.com
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: default avatarPavel Skripkin <paskripkin@gmail.com>
Reviewed-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      19d1532a
  9. 14 Aug, 2021 1 commit
  11. 13 Aug, 2021 8 commits
    • Jakub Kicinski's avatar
      Merge branch 'bnxt-tx-napi-disabling-resiliency-improvements' · 9d5e6a70
      Jakub Kicinski authored 
      Jakub Kicinski says:

====================
bnxt: Tx NAPI disabling resiliency improvements

A lockdep warning was triggered by netpoll because napi poll
was taking the xmit lock. Fix that and a couple more issues
noticed while reading the code.
====================

Link: https://lore.kernel.org/r/20210812214242.578039-1-kuba@kernel.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      9d5e6a70
    • Jakub Kicinski's avatar
      bnxt: count Tx drops · fb9f7190
      Jakub Kicinski authored 
      Drivers should count packets they are dropping.

Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: default avatarMichael Chan <michael.chan@broadcom.com>
Reviewed-by: default avatarEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      fb9f7190
    • Jakub Kicinski's avatar
      bnxt: make sure xmit_more + errors does not miss doorbells · e8d8c5d8
      Jakub Kicinski authored 
      skbs are freed on error and not put on the ring. We may, however,
be in a situation where we're freeing the last skb of a batch,
and there is a doorbell ring pending because of xmit_more() being
true earlier. Make sure we ring the door bell in such situations.

Since errors are rare don't pay attention to xmit_more() and just
always flush the pending frames.

The busy case should be safe to be left alone because it can
only happen if start_xmit races with completions and they
both enable the queue. In that case the kick can't be pending.

Noticed while reading the code.

Fixes: 4d172f21 ("bnxt_en: Implement xmit_more.")
Reviewed-by: default avatarMichael Chan <michael.chan@broadcom.com>
Reviewed-by: default avatarEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      e8d8c5d8
    • Jakub Kicinski's avatar
      bnxt: disable napi before canceling DIM · 01cca6b9
      Jakub Kicinski authored 
      napi schedules DIM, napi has to be disabled first,
then DIM canceled.

Noticed while reading the code.

Fixes: 0bc0b97f ("bnxt_en: cleanup DIM work on device shutdown")
Fixes: 6a8788f2 ("bnxt_en: add support for software dynamic interrupt moderation")
Reviewed-by: default avatarMichael Chan <michael.chan@broadcom.com>
Reviewed-by: default avatarEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      01cca6b9
    • Jakub Kicinski's avatar
      bnxt: don't lock the tx queue from napi poll · 3c603136
      Jakub Kicinski authored 
      We can't take the tx lock from the napi poll routine, because
netpoll can poll napi at any moment, including with the tx lock
already held.

The tx lock is protecting against two paths - the disable
path, and (as Michael points out) the NETDEV_TX_BUSY case
which may occur if NAPI completions race with start_xmit
and both decide to re-enable the queue.

For the disable/ifdown path use synchronize_net() to make sure
closing the device does not race we restarting the queues.
Annotate accesses to dev_state against data races.

For the NAPI cleanup vs start_xmit path - appropriate barriers
are already in place in the main spot where Tx queue is stopped
but we need to do the same careful dance in the TX_BUSY case.

Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: default avatarMichael Chan <michael.chan@broadcom.com>
Reviewed-by: default avatarEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      3c603136
    • Linus Torvalds's avatar
      Merge tag 'net-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · f8e6dfc6
      Linus Torvalds authored 
      Pull networking fixes from Jakub Kicinski:
 "Networking fixes, including fixes from netfilter, bpf, can and
  ieee802154.

  The size of this is pretty normal, but we got more fixes for 5.14
  changes this week than last week. Nothing major but the trend is the
  opposite of what we like. We'll see how the next week goes..

  Current release - regressions:

   - r8169: fix ASPM-related link-up regressions

   - bridge: fix flags interpretation for extern learn fdb entries

   - phy: micrel: fix link detection on ksz87xx switch

   - Revert "tipc: Return the correct errno code"

   - ptp: fix possible memory leak caused by invalid cast

  Current release - new code bugs:

   - bpf: add missing bpf_read_[un]lock_trace() for syscall program

   - bpf: fix potentially incorrect results with bpf_get_local_storage()

   - page_pool: mask the page->signature before the checking, avoid dma
     mapping leaks

   - netfilter: nfnetlink_hook: 5 fixes to information in netlink dumps

   - bnxt_en: fix firmware interface issues with PTP

   - mlx5: Bridge, fix ageing time

  Previous releases - regressions:

   - linkwatch: fix failure to restore device state across
     suspend/resume

   - bareudp: fix invalid read beyond skb's linear data

  Previous releases - always broken:

   - bpf: fix integer overflow involving bucket_size

   - ppp: fix issues when desired interface name is specified via
     netlink

   - wwan: mhi_wwan_ctrl: fix possible deadlock

   - dsa: microchip: ksz8795: fix number of VLAN related bugs

   - dsa: drivers: fix broken backpressure in .port_fdb_dump

   - dsa: qca: ar9331: make proper initial port defaults

  Misc:

   - bpf: add lockdown check for probe_write_user helper

   - netfilter: conntrack: remove offload_pickup sysctl before 5.14 is
     out

   - netfilter: conntrack: collect all entries in one cycle,
     heuristically slow down garbage collection scans on idle systems to
     prevent frequent wake ups"

* tag 'net-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
  vsock/virtio: avoid potential deadlock when vsock device remove
  wwan: core: Avoid returning NULL from wwan_create_dev()
  net: dsa: sja1105: unregister the MDIO buses during teardown
  Revert "tipc: Return the correct errno code"
  net: mscc: Fix non-GPL export of regmap APIs
  net: igmp: increase size of mr_ifc_count
  MAINTAINERS: switch to my OMP email for Renesas Ethernet drivers
  tcp_bbr: fix u32 wrap bug in round logic if bbr_init() called after 2B packets
  net: pcs: xpcs: fix error handling on failed to allocate memory
  net: linkwatch: fix failure to restore device state across suspend/resume
  net: bridge: fix memleak in br_add_if()
  net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
  net: bridge: fix flags interpretation for extern learn fdb entries
  net: dsa: sja1105: fix broken backpressure in .port_fdb_dump
  net: dsa: lantiq: fix broken backpressure in .port_fdb_dump
  net: dsa: lan9303: fix broken backpressure in .port_fdb_dump
  net: dsa: hellcreek: fix broken backpressure in .port_fdb_dump
  bpf, core: Fix kernel-doc notation
  net: igmp: fix data-race in igmp_ifc_timer_expire()
  net: Fix memory leak in ieee802154_raw_deliver
  ...
      f8e6dfc6
    • Linus Torvalds's avatar
      Merge tag 'ceph-for-5.14-rc6' of git://github.com/ceph/ceph-client · 3a03c67d
      Linus Torvalds authored 
      Pull ceph fixes from Ilya Dryomov:
 "A patch to avoid a soft lockup in ceph_check_delayed_caps() from Luis
  and a reference handling fix from Jeff that should address some memory
  corruption reports in the snaprealm area.

  Both marked for stable"

* tag 'ceph-for-5.14-rc6' of git://github.com/ceph/ceph-client:
  ceph: take snap_empty_lock atomically with snaprealm refcount change
  ceph: reduce contention in ceph_check_delayed_caps()
      3a03c67d
    • Linus Torvalds's avatar
      Merge tag 'drm-fixes-2021-08-13' of git://anongit.freedesktop.org/drm/drm · 82cce5f4
      Linus Torvalds authored 
      Pull drm fixes from Dave Airlie:
 "Another week, another set of pretty regular fixes, nothing really
  stands out too much.

  amdgpu:
   - Yellow carp update
   - RAS EEPROM fixes
   - BACO/BOCO fixes
   - Fix a memory leak in an error path
   - Freesync fix
   - VCN harvesting fix
   - Display fixes

  i915:
   - GVT fix for Windows VM hang.
   - Display fix of 12 BPC bits for display 12 and newer.
   - Don't try to access some media register for fused off domains.
   - Fix kerneldoc build warnings.

  mediatek:
   - Fix dpi bridge bug.
   - Fix cursor plane no update.

  meson:
   - Fix colors when booting with HDR"

* tag 'drm-fixes-2021-08-13' of git://anongit.freedesktop.org/drm/drm:
  drm/doc/rfc: drop lmem uapi section
  drm/i915: Only access SFC_DONE when media domain is not fused off
  drm/i915/display: Fix the 12 BPC bits for PIPE_MISC reg
  drm/amd/display: use GFP_ATOMIC in amdgpu_dm_irq_schedule_work
  drm/amd/display: Remove invalid assert for ODM + MPC case
  drm/amd/pm: bug fix for the runtime pm BACO
  drm/amdgpu: handle VCN instances when harvesting (v2)
  drm/meson: fix colour distortion from HDR set during vendor u-boot
  drm/i915/gvt: Fix cached atomics setting for Windows VM
  drm/amdgpu: Add preferred mode in modeset when freesync video mode's enabled.
  drm/amd/pm: Fix a memory leak in an error handling path in 'vangogh_tables_init()'
  drm/amdgpu: don't enable baco on boco platforms in runpm
  drm/amdgpu: set RAS EEPROM address from VBIOS
  drm/amd/pm: update smu v13.0.1 firmware header
  drm/mediatek: Fix cursor plane no update
  drm/mediatek: mtk-dpi: Set out_fmt from config if not the last bridge
  drm/mediatek: dpi: Fix NULL dereference in mtk_dpi_bridge_atomic_check
      82cce5f4
  13. 12 Aug, 2021 2 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7