Add new GFX12 PTE flag AMDGPU_PTE_IS_PTE to svm_range_get_pte_flags
function. This resolves the issues related to SVM enablement in GFX12.
Signed-off-by: Sreekant Somasekharan <sreekant.somasekharan@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable flag in KFD and set the atomic support bit in MQD.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

mqd_stride function in gfx v12 is not implemented, that
causes NULL ptr error. Add the generic func to fix it.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

GFX12 debugging requires setting up precise ALU operation for catching
ALU exceptions.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Lancelot Six <lancelot.six@amd.com>
Reviewed-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Similar to GFX11, GFX12 supports trapping on wave start and end.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Similar to GFX11, always enable the setup of trap temporaries on GFX12.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Updated switch statement to use GFX12 trap handler.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When trap_ctrl.trap_after_inst is set, it is possible for a wave to
enter the trap handler, after single-stepping an instruction and a
save_context is raised, with only save_context set in excp_flag_priv.

Because excp_flag_priv.trap_after_inst is not reliably set, we need to
use the missed single-step workaround for gfx12 as well.

Also add wave_start and wave_end as exceptions that should be handled
by the 2nd level trap handler.
Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Tested-by: Lancelot Six <lancelot.six@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add support to save and restore the work group barrier state in gfx12
CWSR trap handler.

There is no support to directly restore the signal count of a barrier
state, so instead this patch repeatedly calls s_barrier_signal to
increment the signal count to the desired value.

In this patch, I have implemented the logic to restore the barrier at
the end of the block restoring the HWREGs.  This process needs to be
done by exactly 1 wave per work group.  To achieve this, the initial
value of s_restore_spi_init_hi (containing a FIRST_WAVE bit) needs to be
saved up until that point.  An alternative could be restore the barrier
earlier in the process (around when LDS is restored, as the same wave
does both).  Doing this would break the pattern that the restore
procedure follows the CWSR area layout.

Before restoring the barrier, this patch checks if the barrier was whose
state was saved has the "valid" bit set, even if I don't think this
barrier can be in an invalid state during context save.  I expect this
test to always be true.
Signed-off-by: Lancelot SIX <lancelot.six@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

- HWREG changes since gfx11
- Save/restore barrier state
- get_wave_size is now reserved by assembler

v2: rebase (Alex)
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

No functional change. Preparation for gfx12 support.

v2: drop unrelated change (Alex)
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Initial implementation, based on GFX11.

v2: Removed functions not needed by cp scheduler.
v3: Fixed typos.
v4: squash in warning fix (Alex)
Signed-off-by: David Belanger <david.belanger@amd.com>
Acked-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Initial implementation, based on GFX11.

v2: squash in include fix from David (Alex)
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Initial implementation, based on GFX11.

v2: Removed dbg_wa code as not needed on GFX12.
v3: squash in SDMA queue fixes (Alex)
v4: rebase (Alex)
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Added cases for GFX12 in switch statement, code relying on GFX11
implementation until GFX12 implementation is complete.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Added GFX12 support to a few switch statements.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable event log through the HW specific FW API
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Harish Kasiviswanthan <Harish.Kasiviswanthan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable basic mode handling for doorbell ring on unmapped CP queue.
In this mode, MES can start schedule the queue mapping based on HW
interrupt instead of timer.
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Harish Kasiviswanthan <Harish.Kasiviswanthan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Switch to smuio callback to query gpu clock counter
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Align gfxhub settings with mmhub when program rlc ram.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Skip dpm check to init imu firmware for imu v12.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Correct the algorithm of active CU and RB to bypass
the disabled SA for gfx12.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Program rlc ram with golden setting data instead.
The old method (program_imu_rlc_ram_old) should be
retired in the future.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add cgcg&cgls interface for gfx 12.0
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update the registers for gfx12.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For MEC fw data, different pipe should programed into
different address.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

workaournd for the imu fw loading on gfx 12.0 without psp
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Move microcode loading from sw_init to early_init to align with
the perious version of imu init sequence.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Support Save & Restore related fw load with backdoor RLC
autoload type on gfx v12.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Recalculate the number of compute rings to use based on
the gfx hardware configuration. As needed reserve half of
compute rings for mes, kgd can't use up all compute rings.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Only execute IMU related functions if dpm>0.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

support imu related function for gfx v12.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Split PFF/ME/MEC firmware address setting function
from related load microcode funtion, as it's also
needed for rlc autolad.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Initial support for GFX 12.

v1: Add gfx v12_0 ip block support. (Likun)
v2: Switch to gfx.kiq array.
    Move the vmhub from ring callback to ring. (Hawking)
v3: Update various callback function impl. (Hawking)
v4: Warning fixes (Alex)
v5: squash in imu fix, csb, rlc autoload implementations (Alex)
v6: Rebase (Alex)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enlarge the data cache boundary.

v2: use the fix data cache boundary.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix request to MES to set SQ_SHADER_TBA_HI.trap_en for GFX12.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On MES12, HW can monitor up to 2048 doorbells that not be
mapped currently and trigger the interrupt to MES when these unmapped
doorbell been ringed.
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1. fix available compute queue to use
2. enable mes v12 self test
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Split the function of mes fimrware address setting
from mes firmware load for mes v12, as it's also
needed for rlc autoload.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v1: Add mes v12_0 ip block support. (Jack)
v2: Switch to gfx.kiq array. (Hawking)
v3: Switch to AMDGPU_GFXHUB(0). (Hawking)
v4: Rebase (Alex)
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>