Commits · a8d548b0b3eea1d2bd35aec8900d8f11f2e4c3f1 · Kirill Smelkov / linux

19 Mar, 2021 38 commits

scsi: mpt3sas: Fix a few kernel-doc issues · a8d548b0

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

drivers/scsi/mpt3sas/mpt3sas_scsih.c:763: warning: Function parameter or member 'sas_address' not described in '__mpt3sas_get_sdev_by_addr'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:763: warning: expecting prototype for mpt3sas_get_sdev_by_addr(). Prototype was for __mpt3sas_get_sdev_by_addr() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:4535: warning: expecting prototype for _scsih_check_for_pending_internal_cmds(). Prototype was for mpt3sas_check_for_pending_internal_cmds() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'port_entry' not described in '_scsih_look_and_get_matched_port_entry'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'matched_port_entry' not described in '_scsih_look_and_get_matched_port_entry'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'count' not described in '_scsih_look_and_get_matched_port_entry'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6959: warning: Function parameter or member 'port' not described in 'mpt3sas_expander_remove'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:10494: warning: expecting prototype for mpt3sas_scsih_reset_handler(). Prototype was for mpt3sas_scsih_pre_reset_handler() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:10536: warning: expecting prototype for mpt3sas_scsih_reset_handler(). Prototype was for mpt3sas_scsih_reset_done_handler() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:12303: warning: expecting prototype for scsih__ncq_prio_supp(). Prototype was for scsih_ncq_prio_supp() instead

Link: https://lore.kernel.org/r/20210317091230.2912389-15-lee.jones@linaro.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: MPT-FusionLinux.pdl@avagotech.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

a8d548b0

scsi: pmcraid: Correct function name pmcraid_show_adapter_id() in header · a364a147

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

drivers/scsi/pmcraid.c:4079: warning: expecting prototype for pmcraid_show_io_adapter_id(). Prototype was for pmcraid_show_adapter_id() instead

Link: https://lore.kernel.org/r/20210317091230.2912389-14-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

a364a147

scsi: myrs: Add missing ':' to make the kernel-doc checker happy · 9eb292eb

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/myrs.c:1965: warning: Function parameter or member 'dev' not described in 'myrs_is_raid'
 drivers/scsi/myrs.c:1978: warning: Function parameter or member 'dev' not described in 'myrs_get_resync'
 drivers/scsi/myrs.c:2002: warning: Function parameter or member 'dev' not described in 'myrs_get_state'

Link: https://lore.kernel.org/r/20210317091230.2912389-13-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Linux GmbH <hare@suse.com>
Cc: "Leonard N. Zubkoff" <lnz@dandelion.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

9eb292eb

scsi: a100u2w: Fix some misnaming and formatting issues · c548a625

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

drivers/scsi/a100u2w.c:278: warning: expecting prototype for orc_exec_sb(). Prototype was for orc_exec_scb() instead
drivers/scsi/a100u2w.c:596: warning: Function parameter or member 'target' not described in 'orc_device_reset'
drivers/scsi/a100u2w.c:739: warning: Function parameter or member 'host' not described in 'orchid_abort_scb'
drivers/scsi/a100u2w.c:739: warning: Function parameter or member 'scb' not described in 'orchid_abort_scb'
drivers/scsi/a100u2w.c:915: warning: expecting prototype for inia100_queue(). Prototype was for inia100_queue_lck() instead

Link: https://lore.kernel.org/r/20210317091230.2912389-12-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

c548a625

scsi: initio: Fix a few kernel-doc misdemeanours · 100ec495

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

drivers/scsi/initio.c:560: warning: Excess function parameter 'num_scbs' description in 'initio_init'
drivers/scsi/initio.c:1899: warning: expecting prototype for int_initio_scsi_resel(). Prototype was for int_initio_resel() instead
drivers/scsi/initio.c:2615: warning: expecting prototype for i91u_queuecommand(). Prototype was for i91u_queuecommand_lck() instead
drivers/scsi/initio.c:2667: warning: Function parameter or member 'dev' not described in 'i91u_biosparam'
drivers/scsi/initio.c:2667: warning: expecting prototype for i91u_biospararm(). Prototype was for i91u_biosparam() instead
drivers/scsi/initio.c:2740: warning: Function parameter or member 'host_mem' not described in 'i91uSCBPost'
drivers/scsi/initio.c:2740: warning: Function parameter or member 'cblk_mem' not described in 'i91uSCBPost'
drivers/scsi/initio.c:2740: warning: Excess function parameter 'host' description in 'i91uSCBPost'
drivers/scsi/initio.c:2740: warning: Excess function parameter 'cmnd' description in 'i91uSCBPost'

Link: https://lore.kernel.org/r/20210317091230.2912389-11-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Bas Vermeulen <bvermeul@blackstar.xs4all.nl>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Brian Macy <bmacy@sunshinecomputing.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

100ec495

scsi: dc395x: Fix some function param descriptions · 33c8ef95

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/dc395x.c:4353: warning: Function parameter or member 'acb' not described in 'adapter_init'
 drivers/scsi/dc395x.c:4353: warning: Function parameter or member 'io_port_len' not described in 'adapter_init'
 drivers/scsi/dc395x.c:4353: warning: Excess function parameter 'host' description in 'adapter_init'

Link: https://lore.kernel.org/r/20210317091230.2912389-10-lee.jones@linaro.org
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Ali Akcaagac <aliakc@web.de>
Cc: Jamie Lenehan <lenehan@twibble.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: "C.L. Huang" <ching@tekram.com.tw>
Cc: Erich Chen <erich@tekram.com.tw>
Cc: Kurt Garloff <garloff@suse.de>
Cc: dc395x@twibble.org
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

33c8ef95

scsi: be2iscsi: Ensure function follows directly after its header · f1d50e8e

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/be2iscsi/be_main.c:4935: warning: expecting prototype for beiscsi_show_boot_tgt_info(). Prototype was for BEISCSI_SYSFS_ISCSI_BOOT_FLAGS() instead

Link: https://lore.kernel.org/r/20210317091230.2912389-9-lee.jones@linaro.org
Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com>
Cc: Ketan Mukadam <ketan.mukadam@broadcom.com>
Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-drivers@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

f1d50e8e

scsi: aic94xx: Correct misspelling of function asd_dump_seq_state() · 3e2f4679

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aic94xx/aic94xx_dump.c:729: warning: expecting prototype for ads_dump_seq_state(). Prototype was for asd_dump_seq_state() instead

Link: https://lore.kernel.org/r/20210317091230.2912389-8-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: David Chaw <david_chaw@adaptec.com>
Cc: Luben Tuikov <luben_tuikov@adaptec.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

3e2f4679

scsi: sd: Fix function name in header · ad907c54

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/sd.c:1537: warning: expecting prototype for sd_ioctl(). Prototype was for sd_ioctl_common() instead

Link: https://lore.kernel.org/r/20210317091230.2912389-7-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Drew Eckhardt <drew@colorado.edu>
Cc: Eric Youngdale <eric@andante.org>
Cc: Jirka Hanika <geo@ff.cuni.cz>
Cc: Richard Gooch <rgooch@atnf.csiro.au>
Cc: Torben Mathiasen <tmm@image.dk>
Cc: Alex Davis <letmein@erols.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: willy@debian.org
Cc: Kurt Garloff <garloff@suse.de>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

ad907c54

scsi: pmcraid: Fix a whole host of kernel-doc issues · 3673b7b0

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

drivers/scsi/pmcraid.c:455: warning: Function parameter or member 'intrs' not described in 'pmcraid_enable_interrupts'
drivers/scsi/pmcraid.c:455: warning: Excess function parameter 'intr' description in 'pmcraid_enable_interrupts'
drivers/scsi/pmcraid.c:543: warning: Function parameter or member '' not described in 'pmcraid_ioa_reset'
drivers/scsi/pmcraid.c:543: warning: expecting prototype for pmcraid_bist_done(). Prototype was for pmcraid_ioa_reset() instead
drivers/scsi/pmcraid.c:603: warning: Function parameter or member 't' not described in 'pmcraid_reset_alert_done'
drivers/scsi/pmcraid.c:603: warning: Excess function parameter 'cmd' description in 'pmcraid_reset_alert_done'
drivers/scsi/pmcraid.c:638: warning: Function parameter or member '' not described in 'pmcraid_notify_ioastate'
drivers/scsi/pmcraid.c:638: warning: Function parameter or member 'u32' not described in 'pmcraid_notify_ioastate'
drivers/scsi/pmcraid.c:638: warning: expecting prototype for pmcraid_reset_alert(). Prototype was for pmcraid_notify_ioastate() instead
drivers/scsi/pmcraid.c:687: warning: Function parameter or member 't' not described in 'pmcraid_timeout_handler'
drivers/scsi/pmcraid.c:687: warning: Excess function parameter 'cmd' description in 'pmcraid_timeout_handler'
drivers/scsi/pmcraid.c:858: warning: expecting prototype for pmcraid_fire_command(). Prototype was for _pmcraid_fire_command() instead
drivers/scsi/pmcraid.c:972: warning: Function parameter or member '' not described in 'pmcraid_querycfg'
drivers/scsi/pmcraid.c:972: warning: expecting prototype for pmcraid_get_fwversion_done(). Prototype was for pmcraid_querycfg() instead
drivers/scsi/pmcraid.c:1398: warning: Function parameter or member 'aen_msg' not described in 'pmcraid_notify_aen'
drivers/scsi/pmcraid.c:1398: warning: Function parameter or member 'data_size' not described in 'pmcraid_notify_aen'
drivers/scsi/pmcraid.c:1398: warning: Excess function parameter 'type' description in 'pmcraid_notify_aen'
drivers/scsi/pmcraid.c:1781: warning: Function parameter or member '' not described in 'pmcraid_initiate_reset'
drivers/scsi/pmcraid.c:1781: warning: expecting prototype for pmcraid_process_ldn(). Prototype was for pmcraid_initiate_reset() instead
drivers/scsi/pmcraid.c:1887: warning: Function parameter or member '' not described in 'pmcraid_reinit_buffers'
drivers/scsi/pmcraid.c:1887: warning: expecting prototype for pmcraid_reset_enable_ioa(). Prototype was for pmcraid_reinit_buffers() instead
drivers/scsi/pmcraid.c:2704: warning: Function parameter or member 'timeout' not described in 'pmcraid_reset_device'
drivers/scsi/pmcraid.c:3025: warning: expecting prototype for pmcraid_eh_xxxx_reset_handler(). Prototype was for pmcraid_eh_device_reset_handler() instead
drivers/scsi/pmcraid.c:3327: warning: expecting prototype for pmcraid_queuecommand(). Prototype was for pmcraid_queuecommand_lck() instead
drivers/scsi/pmcraid.c:3437: warning: Function parameter or member 'inode' not described in 'pmcraid_chr_open'
drivers/scsi/pmcraid.c:3437: warning: Function parameter or member 'filep' not described in 'pmcraid_chr_open'
drivers/scsi/pmcraid.c:3437: warning: expecting prototype for pmcraid_open(). Prototype was for pmcraid_chr_open() instead
drivers/scsi/pmcraid.c:3457: warning: Function parameter or member 'fd' not described in 'pmcraid_chr_fasync'
drivers/scsi/pmcraid.c:3457: warning: Function parameter or member 'filep' not described in 'pmcraid_chr_fasync'
drivers/scsi/pmcraid.c:3457: warning: Function parameter or member 'mode' not described in 'pmcraid_chr_fasync'
drivers/scsi/pmcraid.c:3457: warning: expecting prototype for pmcraid_fasync(). Prototype was for pmcraid_chr_fasync() instead
drivers/scsi/pmcraid.c:3574: warning: Function parameter or member 'ioctl_cmd' not described in 'pmcraid_ioctl_passthrough'
drivers/scsi/pmcraid.c:3574: warning: Function parameter or member 'buflen' not described in 'pmcraid_ioctl_passthrough'
drivers/scsi/pmcraid.c:3574: warning: Excess function parameter 'cmd' description in 'pmcraid_ioctl_passthrough'
drivers/scsi/pmcraid.c:3905: warning: Function parameter or member 'filep' not described in 'pmcraid_chr_ioctl'
drivers/scsi/pmcraid.c:3905: warning: Function parameter or member 'cmd' not described in 'pmcraid_chr_ioctl'
drivers/scsi/pmcraid.c:3905: warning: Function parameter or member 'arg' not described in 'pmcraid_chr_ioctl'
drivers/scsi/pmcraid.c:3905: warning: expecting prototype for pmcraid_ioctl(). Prototype was for pmcraid_chr_ioctl() instead
drivers/scsi/pmcraid.c:3969: warning: cannot understand function prototype: 'const struct file_operations pmcraid_fops = '
drivers/scsi/pmcraid.c:3993: warning: Function parameter or member 'attr' not described in 'pmcraid_show_log_level'
drivers/scsi/pmcraid.c:4015: warning: Function parameter or member 'attr' not described in 'pmcraid_store_log_level'
drivers/scsi/pmcraid.c:4055: warning: Function parameter or member 'attr' not described in 'pmcraid_show_drv_version'
drivers/scsi/pmcraid.c:4081: warning: Function parameter or member 'attr' not described in 'pmcraid_show_adapter_id'
drivers/scsi/pmcraid.c:4081: warning: expecting prototype for pmcraid_show_io_adapter_id(). Prototype was for pmcraid_show_adapter_id() instead
drivers/scsi/pmcraid.c:4600: warning: Function parameter or member 'pinstance' not described in 'pmcraid_allocate_cmd_blocks'
drivers/scsi/pmcraid.c:5153: warning: Function parameter or member 'minor' not described in 'pmcraid_release_minor'

Link: https://lore.kernel.org/r/20210317091230.2912389-6-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

3673b7b0

scsi: sd_zbc: Place function name into header · 59863cb5

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/sd_zbc.c:137: warning: wrong kernel-doc identifier on line:

Link: https://lore.kernel.org/r/20210317091230.2912389-5-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Le Moal <damien.lemoal@hgst.com>
Cc: Shaun Tancheff <shaun.tancheff@seagate.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

59863cb5

scsi: mvumi: Fix formatting and doc-rot issues · 5ccd6265

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

drivers/scsi/mvumi.c:191: warning: Function parameter or member 'sg_count' not described in 'mvumi_make_sgl'
drivers/scsi/mvumi.c:1301: warning: Function parameter or member 'ob_frame' not described in 'mvumi_complete_cmd'
drivers/scsi/mvumi.c:2084: warning: Function parameter or member 'shost' not described in 'mvumi_queue_command'
drivers/scsi/mvumi.c:2084: warning: Excess function parameter 'done' description in 'mvumi_queue_command'

Link: https://lore.kernel.org/r/20210317091230.2912389-4-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Marvell <jyli@marvell.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

5ccd6265

scsi: ipr: Fix incorrect function names in their headers · 637b5c3e

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/ipr.c:5335: warning: expecting prototype for ipr_eh_dev_reset(). Prototype was for __ipr_eh_dev_reset() instead
 drivers/scsi/ipr.c:5594: warning: expecting prototype for ipr_eh_abort(). Prototype was for ipr_scan_finished() instead
 drivers/scsi/ipr.c:5616: warning: expecting prototype for ipr_eh_host_reset(). Prototype was for ipr_eh_abort() instead
 drivers/scsi/ipr.c:6725: warning: expecting prototype for ipr_info(). Prototype was for ipr_ioa_info() instead

[mkp: tweaked ipr_scan_finished() comment]

Link: https://lore.kernel.org/r/20210317091230.2912389-3-lee.jones@linaro.org
Cc: Brian King <brking@us.ibm.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

637b5c3e

scsi: myrb: Demote non-conformant kernel-doc headers and fix others · 12a1b740

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

drivers/scsi/myrb.c:91: warning: Function parameter or member 'pdev' not described in 'myrb_create_mempools'
drivers/scsi/myrb.c:91: warning: Function parameter or member 'cb' not described in 'myrb_create_mempools'
drivers/scsi/myrb.c:141: warning: Function parameter or member 'cb' not described in 'myrb_destroy_mempools'
drivers/scsi/myrb.c:153: warning: Function parameter or member 'cmd_blk' not described in 'myrb_reset_cmd'
drivers/scsi/myrb.c:164: warning: Function parameter or member 'cb' not described in 'myrb_qcmd'
drivers/scsi/myrb.c:164: warning: Function parameter or member 'cmd_blk' not described in 'myrb_qcmd'
drivers/scsi/myrb.c:187: warning: Function parameter or member 'cb' not described in 'myrb_exec_cmd'
drivers/scsi/myrb.c:187: warning: Function parameter or member 'cmd_blk' not described in 'myrb_exec_cmd'
drivers/scsi/myrb.c:208: warning: Function parameter or member 'cb' not described in 'myrb_exec_type3'
drivers/scsi/myrb.c:208: warning: Function parameter or member 'op' not described in 'myrb_exec_type3'
drivers/scsi/myrb.c:208: warning: Function parameter or member 'addr' not described in 'myrb_exec_type3'
drivers/scsi/myrb.c:231: warning: Function parameter or member 'cb' not described in 'myrb_exec_type3D'
drivers/scsi/myrb.c:231: warning: Function parameter or member 'op' not described in 'myrb_exec_type3D'
drivers/scsi/myrb.c:231: warning: Function parameter or member 'sdev' not described in 'myrb_exec_type3D'
drivers/scsi/myrb.c:231: warning: Function parameter or member 'pdev_info' not described in 'myrb_exec_type3D'
drivers/scsi/myrb.c:341: warning: Function parameter or member 'cb' not described in 'myrb_get_errtable'
drivers/scsi/myrb.c:388: warning: Function parameter or member 'cb' not described in 'myrb_get_ldev_info'
drivers/scsi/myrb.c:440: warning: Function parameter or member 'cb' not described in 'myrb_get_rbld_progress'
drivers/scsi/myrb.c:440: warning: Function parameter or member 'rbld' not described in 'myrb_get_rbld_progress'
drivers/scsi/myrb.c:472: warning: Function parameter or member 'cb' not described in 'myrb_update_rbld_progress'
drivers/scsi/myrb.c:533: warning: Function parameter or member 'cb' not described in 'myrb_get_cc_progress'
drivers/scsi/myrb.c:580: warning: Function parameter or member 'cb' not described in 'myrb_bgi_control'
drivers/scsi/myrb.c:671: warning: Function parameter or member 'cb' not described in 'myrb_hba_enquiry'
drivers/scsi/myrb.c:782: warning: Function parameter or member 'cb' not described in 'myrb_set_pdev_state'
drivers/scsi/myrb.c:782: warning: Function parameter or member 'sdev' not described in 'myrb_set_pdev_state'
drivers/scsi/myrb.c:782: warning: Function parameter or member 'state' not described in 'myrb_set_pdev_state'
drivers/scsi/myrb.c:808: warning: Function parameter or member 'cb' not described in 'myrb_enable_mmio'
drivers/scsi/myrb.c:808: warning: Function parameter or member 'mmio_init_fn' not described in 'myrb_enable_mmio'
drivers/scsi/myrb.c:913: warning: Function parameter or member 'cb' not described in 'myrb_get_hba_config'
drivers/scsi/myrb.c:1200: warning: Function parameter or member 'cb' not described in 'myrb_unmap'
drivers/scsi/myrb.c:1236: warning: Function parameter or member 'cb' not described in 'myrb_cleanup'
drivers/scsi/myrb.c:2249: warning: Function parameter or member 'dev' not described in 'myrb_is_raid'
drivers/scsi/myrb.c:2260: warning: Function parameter or member 'dev' not described in 'myrb_get_resync'
drivers/scsi/myrb.c:2287: warning: Function parameter or member 'dev' not described in 'myrb_get_state'
drivers/scsi/myrb.c:2493: warning: Function parameter or member 'cb' not described in 'myrb_err_status'
drivers/scsi/myrb.c:2493: warning: Function parameter or member 'error' not described in 'myrb_err_status'
drivers/scsi/myrb.c:2493: warning: Function parameter or member 'parm0' not described in 'myrb_err_status'
drivers/scsi/myrb.c:2493: warning: Function parameter or member 'parm1' not described in 'myrb_err_status'

Link: https://lore.kernel.org/r/20210317091230.2912389-2-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Linux GmbH <hare@suse.com>
Cc: "Leonard N. Zubkoff" <lnz@dandelion.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

12a1b740

scsi: nsp32: Correct expected types in debug print formatting · 45d59ab3

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

drivers/scsi/nsp32.c: In function ‘nsp32_setup_sg_table’:
drivers/scsi/nsp32.c:879:6: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘unsigned int’ [-Wformat=]
drivers/scsi/nsp32.c:280:69: note: in definition of macro ‘nsp32_msg’
drivers/scsi/nsp32.c:879:52: note: format string is defined here
drivers/scsi/nsp32.c: In function ‘nsp32_detect’:
drivers/scsi/nsp32.c:2719:6: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘int’ [-Wformat=]
drivers/scsi/nsp32.c:280:69: note: in definition of macro ‘nsp32_msg’
drivers/scsi/nsp32.c:2719:22: note: format string is defined here
drivers/scsi/nsp32.c:2719:6: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 6 has type ‘int’ [-Wformat=]
drivers/scsi/nsp32.c:280:69: note: in definition of macro ‘nsp32_msg’
drivers/scsi/nsp32.c:2719:28: note: format string is defined here
drivers/scsi/nsp32.c: In function ‘nsp32_suspend’:
drivers/scsi/nsp32.c:3267:23: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 6 has type ‘pm_message_t’ {aka ‘struct pm_message’} [-Wformat=]
drivers/scsi/nsp32.c:280:69: note: in definition of macro ‘nsp32_msg’
drivers/scsi/nsp32.c:3267:56: note: format string is defined here

Link: https://lore.kernel.org/r/20210317091125.2910058-9-lee.jones@linaro.org
Cc: GOTO Masanori <gotom@debian.or.jp>
Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: gotom@debian.org
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

45d59ab3

scsi: isci: Make local function port_state_name() static · 72444bbd

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/isci/port.c:65:13: warning: no previous prototype for ‘port_state_name’ [-Wmissing-prototypes]

Link: https://lore.kernel.org/r/20210317091125.2910058-8-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

72444bbd

scsi: isci: Make local function isci_remote_device_wait_for_resume_from_abort() static · ab3f2d15

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

drivers/scsi/isci/remote_device.c:1387:6: warning: no previous prototype for ‘isci_remote_device_wait_for_resume_from_abort’ [-Wmissing-prototypes]

Link: https://lore.kernel.org/r/20210317091125.2910058-7-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

ab3f2d15

scsi: sim710: Remove unused variable 'err' from sim710_init() · 886eb6d5

Lee Jones authored Mar 17, 2021

Take the opportunity to rework the comment a little.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/sim710.c: In function ‘sim710_init’:
 drivers/scsi/sim710.c:216:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20210317091125.2910058-6-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Richard Hirst <richard@sleepie.demon.co.uk>
Cc: c by <James.Bottomley@SteelEye.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

886eb6d5

scsi: FlashPoint: Remove unused variable 'TID' from FlashPoint_AbortCCB() · f466690b

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/FlashPoint.c: In function ‘FlashPoint_AbortCCB’:
 drivers/scsi/FlashPoint.c:1618:16: warning: variable ‘TID’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20210317091125.2910058-5-lee.jones@linaro.org
Cc: Khalid Aziz <khalid@gonehiking.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

f466690b

scsi: nsp32: Remove or exclude unused variables · 94685e7a

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

drivers/scsi/nsp32.c: In function ‘nsp32_selection_autoscsi’:
drivers/scsi/nsp32.c:584:17: warning: variable ‘execph’ set but not used [-Wunused-but-set-variable]
drivers/scsi/nsp32.c: In function ‘nsp32_msgout_occur’:
drivers/scsi/nsp32.c:1785:7: warning: variable ‘new_sgtp’ set but not used [-Wunused-but-set-variable]
drivers/scsi/nsp32.c: In function ‘nsp32_analyze_sdtr’:
drivers/scsi/nsp32.c:2227:20: warning: variable ‘syncnum’ set but not used [-Wunused-but-set-variable]
drivers/scsi/nsp32.c:2223:20: warning: variable ‘synct’ set but not used [-Wunused-but-set-variable]
drivers/scsi/nsp32.c: In function ‘nsp32_do_bus_reset’:
drivers/scsi/nsp32.c:2841:17: warning: variable ‘intrdat’ set but not used [-Wunused-but-set-variable]
drivers/scsi/nsp32.c: In function ‘nsp32_getprom_param’:
drivers/scsi/nsp32.c:2912:11: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20210317091125.2910058-4-lee.jones@linaro.org
Cc: GOTO Masanori <gotom@debian.or.jp>
Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: gotom@debian.org
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

94685e7a

scsi: nsp32: Supply __printf(x, y) formatting for nsp32_message() · 66730771

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/nsp32.c: In function ‘nsp32_message’:
 drivers/scsi/nsp32.c:318:2: warning: function ‘nsp32_message’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]

Link: https://lore.kernel.org/r/20210317091125.2910058-3-lee.jones@linaro.org
Cc: GOTO Masanori <gotom@debian.or.jp>
Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: gotom@debian.org
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

66730771

scsi: BusLogic: Supply __printf(x, y) formatting for blogic_msg() · 5c9e2596

Lee Jones authored Mar 17, 2021

Fixes the following W=1 kernel build warning(s):

 In file included from drivers/scsi/BusLogic.c:51:
 drivers/scsi/BusLogic.c: In function ‘blogic_msg’:
 drivers/scsi/BusLogic.c:3591:2: warning: function ‘blogic_msg’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]

Link: https://lore.kernel.org/r/20210317091125.2910058-2-lee.jones@linaro.org
Cc: Khalid Aziz <khalid@gonehiking.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: "Leonard N. Zubkoff" <lnz@dandelion.com>
Cc: linux-scsi@vger.kernel.org
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

5c9e2596

scsi: sbitmap: Silence a debug kernel warning triggered by sbitmap_put() · 035e9f47

Bart Van Assche authored Mar 16, 2021

All sbitmap code uses implied preemption protection to update
sb->alloc_hint except sbitmap_put(). Using implied preemption protection is
safe since the value of sb->alloc_hint only affects performance of sbitmap
allocations but not their correctness. Change this_cpu_ptr() in
sbitmap_put() into raw_cpu_ptr() to suppress the following kernel warning
that appears with preemption debugging enabled (CONFIG_DEBUG_PREEMPT):

BUG: using smp_processor_id() in preemptible [00000000] code: scsi_eh_0/152
caller is debug_smp_processor_id+0x17/0x20
CPU: 1 PID: 152 Comm: scsi_eh_0 Tainted: G        W         5.12.0-rc1-dbg+ #6
Call Trace:
 show_stack+0x52/0x58
 dump_stack+0xaf/0xf3
 check_preemption_disabled+0xce/0xd0
 debug_smp_processor_id+0x17/0x20
 scsi_device_unbusy+0x13a/0x1c0 [scsi_mod]
 scsi_finish_command+0x4d/0x290 [scsi_mod]
 scsi_eh_flush_done_q+0x1e7/0x280 [scsi_mod]
 ata_scsi_port_error_handler+0x592/0x750 [libata]
 ata_scsi_error+0x1a0/0x1f0 [libata]
 scsi_error_handler+0x19e/0x330 [scsi_mod]
 kthread+0x222/0x250
 ret_from_fork+0x1f/0x30

Link: https://lore.kernel.org/r/20210317032648.9080-1-bvanassche@acm.org
Fixes: c548e62b ("scsi: sbitmap: Move allocation hint into sbitmap")
Cc: Hannes Reinecke <hare@suse.de>
Cc: Omar Sandoval <osandov@fb.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

035e9f47

scsi: target: Fix htmldocs warning in target_submit_prep() · b1ebd3b0

Mike Christie authored Mar 18, 2021

Fix warning:

drivers/target/target_core_transport.c:1661: WARNING: Block quote ends
without a blank line; unexpected unindent.

Link: https://lore.kernel.org/r/20210318225858.11863-1-michael.christie@oracle.comSigned-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

b1ebd3b0

scsi: ufs: core: Tidy up WB configuration code · 3b5f3c0d

Yue Hu authored Mar 18, 2021

There are similar code implementations for WB configuration in
ufshcd_wb_{ctrl, toggle_flush_during_h8, toggle_flush}. Extract the common
parts to create a new helper with a flag parameter to reduce code
duplication.

Meanwhile, rename ufshcd_wb_ctrl() to ufshcd_wb_toggle() for better
readability. And remove unnecessary log messages from ufshcd_wb_config()
since relevant toggle function will emit messages. Also change
ufshcd_wb_toggle_flush{__during_h8} to void type accordingly.

Link: https://lore.kernel.org/r/20210318095536.2048-1-zbestahu@gmail.comReviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Yue Hu <huyue2@yulong.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

3b5f3c0d

scsi: fusion: Fix a typo in the file mptbase.h · 69a1709e

Bhaskar Chowdhury authored Mar 17, 2021

s/contets/contents/

Link: https://lore.kernel.org/r/20210317101238.2627574-1-unixbhaskar@gmail.comAcked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

69a1709e

scsi: fnic: Rudimentary spelling fixes · bcf064bc

Bhaskar Chowdhury authored Mar 17, 2021

Rudimentary typo fixes throughout the fnic_trace.c file.

Link: https://lore.kernel.org/r/20210317092240.927822-1-unixbhaskar@gmail.comAcked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

bcf064bc

scsi: 53c700: Fix spelling of conditions · ac5669bf

ganjisheng authored Mar 16, 2021

Link: https://lore.kernel.org/r/20210316025141.824-1-qiumibaozi_1@163.comSigned-off-by: ganjisheng <ganjisheng@yulong.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

ac5669bf

scsi: qla1280: Spelling fixes · 1bf5fa1a

Bhaskar Chowdhury authored Mar 15, 2021

s/quantites/quantities/
s/Unfortunely/Unfortunately/

Link: https://lore.kernel.org/r/20210315021610.2089087-1-unixbhaskar@gmail.comAcked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1bf5fa1a

scsi: csiostor: Assign boolean values to a bool variable · 2ed0fc2b

Jiapeng Chong authored Mar 09, 2021

Fix the following coccicheck warnings:

./drivers/scsi/csiostor/csio_scsi.c:150:9-10: WARNING: return of 0/1 in
function 'csio_scsi_itnexus_loss_error' with return type bool.

Link: https://lore.kernel.org/r/1615282668-36935-1-git-send-email-jiapeng.chong@linux.alibaba.comReported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

2ed0fc2b

scsi: 3w-sas: Remove unneeded variable 'retval' · 2af0bf34

Yang Li authored Mar 09, 2021

Fix the following coccicheck warning:

 ./drivers/scsi/3w-sas.c:866:5-11: Unneeded variable: "retval". Return "1"
on line 898

Link: https://lore.kernel.org/r/1615272064-42109-1-git-send-email-yang.lee@linux.alibaba.comReported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

2af0bf34

scsi: mvumi: Use true and false for bool variable · 59f90f5e

Jiapeng Chong authored Feb 18, 2021

Fix the following coccicheck warnings:

./drivers/scsi/mvumi.c:69:9-10: WARNING: return of 0/1 in function
'tag_is_empty' with return type bool.

Link: https://lore.kernel.org/r/1613643371-122635-1-git-send-email-jiapeng.chong@linux.alibaba.comReported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

59f90f5e

scsi: mpt3sas: Update driver version to 37.101.00.00 · 37067b97

Suganath Prabu S authored Mar 05, 2021

Update driver version to 37.101.00.00.

Link: https://lore.kernel.org/r/20210305102904.7560-8-suganath-prabu.subramani@broadcom.comSigned-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

37067b97

scsi: mpt3sas: Force reply post array allocations to be within same 4 GB region · c569de89

Suganath Prabu S authored Mar 05, 2021

According to the MPI specification, reply post array buffers can not cross
a 4 GB boundary.

While allocating, if any buffer crosses the 4 GB boundary, then:

 - Release the already allocated memory pools; and

 - Reallocate them by changing the DMA coherent mask to 32-bit

Link: https://lore.kernel.org/r/20210305102904.7560-7-suganath-prabu.subramani@broadcom.comSigned-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

c569de89

scsi: mpt3sas: Force reply post buffer allocations to be within same 4 GB region · 2e4e8587

Suganath Prabu S authored Mar 05, 2021

According to the MPI specification, reply post buffers can not cross a 4 GB
boundary.

While allocating, if any buffer crosses the 4 GB boundary, then:

 - Release the already allocated memory pools; and

 - Reallocate them by changing the DMA coherent mask to 32-bit

Link: https://lore.kernel.org/r/20210305102904.7560-6-suganath-prabu.subramani@broadcom.comSigned-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

2e4e8587

scsi: mpt3sas: Force reply buffer allocations to be within same 4 GB region · 58501fd9

Suganath Prabu S authored Mar 05, 2021

According to the MPI specification, reply buffers can not cross a 4 GB
boundary.

While allocating, if any buffer crosses the 4 GB boundary, then:

 - Release the already allocated memory pools; and

 - Reallocate them by changing the DMA coherent mask to 32-bit

Link: https://lore.kernel.org/r/20210305102904.7560-5-suganath-prabu.subramani@broadcom.comSigned-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

58501fd9

scsi: mpt3sas: Force sense buffer allocations to be within same 4 GB region · 970ac2bb

Suganath Prabu S authored Mar 05, 2021

According to the MPI specification, sense buffers can not cross a 4 GB
boundary.

While allocating, if any buffer crosses the 4 GB boundary, then:

 - Release the already allocated memory pools; and

 - Reallocate them by changing the DMA coherent mask to 32-bit

Link: https://lore.kernel.org/r/20210305102904.7560-4-suganath-prabu.subramani@broadcom.comSigned-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

970ac2bb

scsi: mpt3sas: Force chain buffer allocations to be within same 4 GB region · 7dd847da

Suganath Prabu S authored Mar 05, 2021

According to the MPI specification, chain buffers can not cross a 4 GB
boundary.

While allocating, if any buffer crosses the 4 GB boundary, then:

 - Release the already allocated memory pools; and

 - Reallocate them by changing the DMA coherent mask to 32-bit

Link: https://lore.kernel.org/r/20210305102904.7560-3-suganath-prabu.subramani@broadcom.comSigned-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

7dd847da

17 Mar, 2021 2 commits

scsi: mpt3sas: Force PCIe scatterlist allocations to be within same 4 GB region · d6adc251

Suganath Prabu S authored Mar 05, 2021

According to the MPI specification, PCIe SGL buffers can not cross a 4 GB
boundary.

While allocating, if any buffer crosses the 4 GB boundary, then:

 - Release the already allocated memory pools; and

 - Reallocate them by changing the DMA coherent mask to 32-bit

Link: https://lore.kernel.org/r/20210305102904.7560-2-suganath-prabu.subramani@broadcom.comSigned-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

d6adc251

scsi: mpt3sas: Replace unnecessary dynamic allocation with a static one · a1c4d774

Gustavo A. R. Silva authored Mar 10, 2021

Dynamic memory allocation isn't actually needed and it can be replaced by
statically allocating memory for struct object io_unit_pg3 with 36
hardcoded entries for its GPIOVal array.

Also, this helps the with ongoing efforts to enable -Warray-bounds by
fixing the following warning:

drivers/scsi/mpt3sas/mpt3sas_ctl.c: In function ‘BRM_status_show’:
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3257:63: warning: array subscript 24 is above array bounds of ‘U16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds]
 3257 |  backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);
./include/uapi/linux/byteorder/little_endian.h:36:51: note: in definition of macro ‘__le16_to_cpu’
   36 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
      |                                                   ^
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3257:31: note: in expansion of macro ‘le16_to_cpu’
 3257 |  backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);

Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/lkml/202103101058.16ED27BE3@keescook/
Link: https://lore.kernel.org/r/20210310235951.GA108661@embeddedorReviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

a1c4d774