Assorted small driver/core fixes.

devm_* API conversion for hid-sony

Multitouch updates:

- Dial support
- Palm rejection for touchscreens
- a few small assorted fixes

Device-specific fixes for hid-intel-ish

Low voltage support for i2c-hid

Resolution/pressure fixes and new device support for hid-elan

New device support for hid-cougar

ish_dev_init() allocates 512*176 bytes memory for tx_buf and stores it at
&dev->wr_free_list_head.link list on ish_probe().
But there is no deallocation of this memory in ish_remove() and in
ish_probe() error path.
So current intel-ish-ipc provides 88 KB memory leak for each
probe/release.

The patch replaces kzalloc allocation by devm_kzalloc and removes
ishtp_device *dev deallocation by kfree.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

On Mehlow Xeon-E workstation, ISH PCI device is enabled but without ISH
firmware. Here the ISH device PCI device id was reused for some non Linux
storage drivers. So this was not done for enabling ISH. But this has a
undesirable side effect for Linux.

Here the ISH driver will be loaded via PCI enumeration and will try to do
reset sequence. But reset sequence will wait till timeout as there is no
real ISH firmware is present to take action. This delay will add to boot
time of Linux (This platform will still continue to boot after this
timeout).

To avoid this boot delay we need to prevent loading of ISH drivers on
this platform. So we need to have hack to avoid treating this device as
ISH on this platform. To identify this workstation, we need some runtime
method. Luckily there are special PCI id on this workstation to
distinguish from the client version of this platform. On client version,
the ISH is supported using same PCI device id. So this change look for
the presence of PCI device IDs A309 and A30A and exit.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Cougar 500k Gaming Keyboard have some special function keys that
make the keyboard stop responding once pressed. Implement the custom
vendor interface that deals with the extended keypresses to fix.

The bug can be reproduced by plugging in the keyboard, then pressing the
rightmost part of the spacebar.
Signed-off-by: Daniel M. Lambea <dmlambea@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The function compare_device_paths from wacom_sys.c is generic
and useful for other drivers. Move the function to hid-core and
rename it as hid_compare_device_paths.
Signed-off-by: Daniel M. Lambea <dmlambea@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Variable num_frags is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'num_frags' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Usually, there is no palm rejection for touchscreens. You don't rest
your palm on the touchscreen while interacting with it.
However, some wacom devices do so because you can rest your palm while
interacting with the stylus.

Unfortunately, the spec for touchscreens[1] is less precise than the one
for touchpads[2]. This leads to a situation where it's 'legitimate'
for a touchscreen to provide both tipswitch off and confidence off in the
same report.

Work around that by keeping the slot active for one frame where we report
MT_TOOL_PALM, and then synthesizing the release event in a separate frame.
frame
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[rebased and new commit message]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

According to [1] the confidence is used not only by touchpad devices,
but also by touchscreens.

[1] https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchscreen-required-hid-top-level-collectionsAcked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[rebased]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

According to Microsoft specification [1] for Precision Touchpads (and
Touchscreens) the devices use "confidence" reports to signal accidental
touches, or contacts that are "too large to be a finger". Instead of
simply marking contact inactive in this case (which causes issues if
contact was originally proper and we lost confidence in it later, as
this results in accidental clicks, drags, etc), let's report such
contacts as MT_TOOL_PALM and let userspace decide what to do.

[1] https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-windows-precision-touchpad-collectionSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[splitted and rebased]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The tool works nicely with hid-generic, but it ends up creating 9
different input nodes with most of them only having ABS_MISC set.

Filter the axis out, which reduces the amount of devices to 2. One is
the proper System Multi-axis collection, the other exported device
seems to provide SLEEP and POWER Key, not sure how one can trigger
those events though.

Filtering the ABS_X and ABS_Y axes also prevents udev to detect this as
a touchscreen.
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Looks like 4 was sufficient until now. However, the Surface Dial needs
a stack of 5 and simply fails at probing.
Dynamically add HID_COLLECTION_STACK_SIZE to the size of the stack if
we hit the upper bound.

Checkpatch complains about bare unsigned, so converting those to
'unsigned int' in struct hid_parser
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Dell Canvas 27 has a tool that can be put on the surface and acts
as a dial. The firmware processes the detection of the tool and forward
regular HID reports with X, Y, Azimuth, rotation, width/height.

The firmware also exports Contact ID, Countact Count which may hint that
several totems can be used at the same time (the FW only supports one).

We can tell that MT_TOOL_DIAL will be reported by setting the min/max
of ABS_MT_TOOL_TYPE to MT_TOOL_DIAL.

This tool is aimed at being used by the system and not the applications,
so the user space processing should not go through the regular touch
inputs.
We set INPUT_PROP_DIRECT which applies ID_INPUT_TOUCHSCREEN to this new
type of devices, but we will counter this for the time being with the
special udev hwdb entry mentioned above.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1511846Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The current way of handling multitouch data is not very straightforward:
- in mt_event() we do nothing
- in mt_report() we:
  - do some gym to fetch the scantime and the contact count
  - then iterate over the input fields where we copy the data to a
    temporary place
  - when we see the last field in a slot, we then use this data to emit
    the input data

A more streamlined way is to first get all of the address in the report
of all fields, and then just pick the fields we are interested in in
mt_report()
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Now that the driver can handle more than one multitouch collection in
a single HID device, ditch the last bit that contains us to use only
one mt collection.
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

If a device has more than one multitouch collection, there is a chance
we need per tool quirks. This is the case for the Totem on the Dell
Canvas.

Note that thesysfs attribute quirks can now get out of sync, but there
should not be much users of it as it's debugging only.
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Currently, hid-multitouch can only handle one multitouch collection at
a time. This is an issue for the Dell Canvas, as the Totem (a dial tool)
is also using a multitouch-like collection.

Factor out the multitouch collection data in their own struct.
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

const is a magic keyword here :)
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

A dial is a tool you place on a multitouch surface which reports its
orientation or a relative angle of rotation when rotating its knob.

Some examples are the Dell Totem (on the Canvas 27"), the Microsoft Dial,
or the Griffin Powermate, though the later can't be put on a touch surface.

We give some extra space to account for other types of fingers if we need
(MT_TOOL_THUMB)

Slightly change the documentation to not make it mandatory to update each
MT_TOOL we add.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Toshiba Click Mini L9W keyboard dock has a single i2c-hid Elan device
for both the keyboard and the touchpad. Add support for the touchpad to
the hid-elan driver, rather then relying on mouse emulation.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Now that we query all the parameters, adding support for new hardware
is easy. This commit adds support for the touchpad found on the
HP x2 10-n000nd touchpad 2-in-1.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Note all Elan touchpads have a LED make this configurable using
a flag in hi_id.driver_data.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Query the resolution from the touchpad and report it to userspace
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Query the device's max_x and max_y value from the touchpad rather then
hardcoding it. This makes adding support for other USB ids a lot easier.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

There is no need to have these configurable.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Elan has given me a (GPL-ed) Android driver for their non HID-mt touchpads
to help improve the upstream support.

Acoording to Elan what we are currently reporting as tool-width
really is a per-touch pressure. This always has a maximum of 255, so there
is no need to make the max configurable.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

We never report MT_TOUCH_MAJOR, so lets not claim that we do.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

max_area_x and max_area_y are initialized but never used anywhere,
drop them.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID fixes from Jiri Kosina:

 - spectrev1 pattern fix in hiddev from Gustavo A. R. Silva

 - bounds check fix for hid-debug from Daniel Rosenberg

 - regression fix for HID autobinding from Benjamin Tissoires

 - removal of excessive logging from i2c-hid driver from Jason Andryuk

 - fix specific to 2nd generation of Wacom Intuos devices from Jason
   Gerecke

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hiddev: fix potential Spectre v1
  HID: i2c-hid: Fix "incomplete report" noise
  HID: wacom: Correct touch maximum XY of 2nd-gen Intuos
  HID: debug: check length before copy_to_user()
  HID: core: allow concurrent registration of drivers

Update my TDA998x HDMI encoder MAINTAINERS entry to include the
dt-bindings header, and a keyword pattern to catch patches containing
the DT compatible.  Also change the status to "maintained" rather than
"supported".
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

HID: hid-sony.c: Use devm_ api to simplify sc->output_report_dmabuf

Using devm_ calls, the resources of the Sony game devices's features are
tied to the main device handle, making it easier to handle errors and
teardown inside the device driver. Altogether, this reduces complexity
of the driver source.
Signed-off-by: Hanno Zulla <kontakt@hanno.de>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: hid-sony.c: Use devm_ api to simplify sony_battery_probe()

Using devm_ calls, the resources of the Sony game devices's features are
tied to the main device handle, making it easier to handle errors and
teardown inside the device driver. Altogether, this reduces complexity
of the driver source.
Signed-off-by: Hanno Zulla <kontakt@hanno.de>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

[PATCH 3/5] HID: hid-sony.c: Use devm_ api to simplify sony_leds_init()

Using devm_ calls, the resources of the Sony game devices's features are
tied to the main device handle, making it easier to handle errors and
teardown inside the device driver. Altogether, this reduces complexity
of the driver source.
Signed-off-by: Hanno Zulla <kontakt@hanno.de>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

[PATCH 2/5] HID: hid-sony.c: Use devm_ api to simplify sony_register_sensors()

Using devm_ calls, the resources of the Sony game devices's features are
tied to the main device handle, making it easier to handle errors and
teardown inside the device driver. Altogether, this reduces complexity
of the driver source.
Signed-off-by: Hanno Zulla <kontakt@hanno.de>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: hid-sony.c: Use devm_ api to simplify sony_register_touchpad()

Using devm_ calls, the resources of the Sony game devices's features are
tied to the main device handle, making it easier to handle errors and
teardown inside the device driver. Altogether, this reduces complexity
of the driver source.
Signed-off-by: Hanno Zulla <kontakt@hanno.de>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>