- 28 Dec, 2018 40 commits
-
-
Minchan Kim authored
Add a new feature "zram idle/huge page writeback". In the zram-swap use case, zram usually has many idle/huge swap pages. It's pointless to keep them in memory (ie, zram). To solve this problem, this feature introduces idle/huge page writeback to the backing device so the goal is to save more memory space on embedded systems. Normal sequence to use idle/huge page writeback feature is as follows, while (1) { # mark allocated zram slot to idle echo all > /sys/block/zram0/idle # leave system working for several hours # Unless there is no access for some blocks on zram, # they are still IDLE marked pages. echo "idle" > /sys/block/zram0/writeback or/and echo "huge" > /sys/block/zram0/writeback # write the IDLE or/and huge marked slot into backing device # and free the memory. } Per the discussion at https://lore.kernel.org/lkml/20181122065926.GG3441@jagdpanzerIV/T/#u, This patch removes direct incommpressibe page writeback feature (d2afd25114f4 ("zram: write incompressible pages to backing device")). Below concerns from Sergey: == &< == "IDLE writeback" is superior to "incompressible writeback". "incompressible writeback" is completely unpredictable and uncontrollable; it depens on data patterns and compression algorithms. While "IDLE writeback" is predictable. I even suspect, that, *ideally*, we can remove "incompressible writeback". "IDLE pages" is a super set which also includes "incompressible" pages. So, technically, we still can do "incompressible writeback" from "IDLE writeback" path; but a much more reasonable one, based on a page idling period. I understand that you want to keep "direct incompressible writeback" around. ZRAM is especially popular on devices which do suffer from flash wearout, so I can see "incompressible writeback" path becoming a dead code, long term. == &< == Below concerns from Minchan: == &< == My concern is if we enable CONFIG_ZRAM_WRITEBACK in this implementation, both hugepage/idlepage writeck will turn on. However someuser want to enable only idlepage writeback so we need to introduce turn on/off knob for hugepage or new CONFIG_ZRAM_IDLEPAGE_WRITEBACK for those usecase. I don't want to make it complicated *if possible*. Long term, I imagine we need to make VM aware of new swap hierarchy a little bit different with as-is. For example, first high priority swap can return -EIO or -ENOCOMP, swap try to fallback to next lower priority swap device. With that, hugepage writeback will work tranparently. So we could regard it as regression because incompressible pages doesn't go to backing storage automatically. Instead, user should do it via "echo huge" > /sys/block/zram/writeback" manually. == &< == Link: http://lkml.kernel.org/r/20181127055429.251614-6-minchan@kernel.orgSigned-off-by:Minchan Kim <minchan@kernel.org> Reviewed-by:
Joey Pabalinas <joeypabalinas@gmail.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Minchan Kim authored
To support idle page writeback with upcoming patches, this patch introduces a new ZRAM_IDLE flag. Userspace can mark zram slots as "idle" via "echo all > /sys/block/zramX/idle" which marks every allocated zram slot as ZRAM_IDLE. User could see it by /sys/kernel/debug/zram/zram0/block_state. 300 75.033841 ...i 301 63.806904 s..i 302 63.806919 ..hi Once there is IO for the slot, the mark will be disappeared. 300 75.033841 ... 301 63.806904 s..i 302 63.806919 ..hi Therefore, 300th block is idle zpage. With this feature, user can how many zram has idle pages which are waste of memory. Link: http://lkml.kernel.org/r/20181127055429.251614-5-minchan@kernel.orgSigned-off-by: -
Minchan Kim authored
Rename some variables and restructure some code for better readability in writeback and zs_free_page. Link: http://lkml.kernel.org/r/20181127055429.251614-4-minchan@kernel.orgSigned-off-by:
-
Minchan Kim authored
If blkdev_get fails, we shouldn't do blkdev_put. Otherwise, kernel emits below log. This patch fixes it. WARNING: CPU: 0 PID: 1893 at fs/block_dev.c:1828 blkdev_put+0x105/0x120 Modules linked in: CPU: 0 PID: 1893 Comm: swapoff Not tainted 4.19.0+ #453 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 RIP: 0010:blkdev_put+0x105/0x120 Call Trace: __x64_sys_swapoff+0x46d/0x490 do_syscall_64+0x5a/0x190 entry_SYSCALL_64_after_hwframe+0x49/0xbe irq event stamp: 4466 hardirqs last enabled at (4465): __free_pages_ok+0x1e3/0x490 hardirqs last disabled at (4466): trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (3420): __do_softirq+0x333/0x446 softirqs last disabled at (3407): irq_exit+0xd1/0xe0 Link: http://lkml.kernel.org/r/20181127055429.251614-3-minchan@kernel.orgSigned-off-by: -
Minchan Kim authored
Patch series "zram idle page writeback", v3. Inherently, swap device has many idle pages which are rare touched since it was allocated. It is never problem if we use storage device as swap. However, it's just waste for zram-swap. This patchset supports zram idle page writeback feature. * Admin can define what is idle page "no access since X time ago" * Admin can define when zram should writeback them * Admin can define when zram should stop writeback to prevent wearout Details are in each patch's description. This patch (of 7): ================================ WARNING: inconsistent lock state 4.19.0+ #390 Not tainted -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. zram_verify/2095 [HC0[0]:SC1[1]:HE1:SE0] takes: 00000000b1828693 (&(&zram->bitmap_lock)->rlock){+.?.}, at: put_entry_bdev+0x1e/0x50 {SOFTIRQ-ON-W} state was registered at: _raw_spin_lock+0x2c/0x40 zram_make_request+0x755/0xdc9 generic_make_request+0x373/0x6a0 submit_bio+0x6c/0x140 __swap_writepage+0x3a8/0x480 shrink_page_list+0x1102/0x1a60 shrink_inactive_list+0x21b/0x3f0 shrink_node_memcg.constprop.99+0x4f8/0x7e0 shrink_node+0x7d/0x2f0 do_try_to_free_pages+0xe0/0x300 try_to_free_pages+0x116/0x2b0 __alloc_pages_slowpath+0x3f4/0xf80 __alloc_pages_nodemask+0x2a2/0x2f0 __handle_mm_fault+0x42e/0xb50 handle_mm_fault+0x55/0xb0 __do_page_fault+0x235/0x4b0 page_fault+0x1e/0x30 irq event stamp: 228412 hardirqs last enabled at (228412): [<ffffffff98245846>] __slab_free+0x3e6/0x600 hardirqs last disabled at (228411): [<ffffffff98245625>] __slab_free+0x1c5/0x600 softirqs last enabled at (228396): [<ffffffff98e0031e>] __do_softirq+0x31e/0x427 softirqs last disabled at (228403): [<ffffffff98072051>] irq_exit+0xd1/0xe0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&zram->bitmap_lock)->rlock); <Interrupt> lock(&(&zram->bitmap_lock)->rlock); *** DEADLOCK *** no locks held by zram_verify/2095. stack backtrace: CPU: 5 PID: 2095 Comm: zram_verify Not tainted 4.19.0+ #390 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: <IRQ> dump_stack+0x67/0x9b print_usage_bug+0x1bd/0x1d3 mark_lock+0x4aa/0x540 __lock_acquire+0x51d/0x1300 lock_acquire+0x90/0x180 _raw_spin_lock+0x2c/0x40 put_entry_bdev+0x1e/0x50 zram_free_page+0xf6/0x110 zram_slot_free_notify+0x42/0xa0 end_swap_bio_read+0x5b/0x170 blk_update_request+0x8f/0x340 scsi_end_request+0x2c/0x1e0 scsi_io_completion+0x98/0x650 blk_done_softirq+0x9e/0xd0 __do_softirq+0xcc/0x427 irq_exit+0xd1/0xe0 do_IRQ+0x93/0x120 common_interrupt+0xf/0xf </IRQ> With writeback feature, zram_slot_free_notify could be called in softirq context by end_swap_bio_read. However, bitmap_lock is not aware of that so lockdep yell out: get_entry_bdev spin_lock(bitmap->lock); irq softirq end_swap_bio_read zram_slot_free_notify zram_slot_lock <-- deadlock prone zram_free_page put_entry_bdev spin_lock(bitmap->lock); <-- deadlock prone With akpm's suggestion (i.e. bitmap operation is already atomic), we could remove bitmap lock. It might fail to find a empty slot if serious contention happens. However, it's not severe problem because huge page writeback has already possiblity to fail if there is severe memory pressure. Worst case is just keeping the incompressible in memory, not storage. The other problem is zram_slot_lock in zram_slot_slot_free_notify. To make it safe is this patch introduces zram_slot_trylock where zram_slot_free_notify uses it. Although it's rare to be contented, this patch adds new debug stat "miss_free" to keep monitoring how often it happens. Link: http://lkml.kernel.org/r/20181127055429.251614-2-minchan@kernel.orgSigned-off-by: -
Qian Cai authored
Kmemleak does not play well with KASAN (tested on both HPE Apollo 70 and Huawei TaiShan 2280 aarch64 servers). After calling start_kernel()->setup_arch()->kasan_init(), kmemleak early log buffer went from something like 280 to 260000 which caused kmemleak disabled and crash dump memory reservation failed. The multitude of kmemleak_alloc() calls is from nested loops while KASAN is setting up full memory mappings, so let early kmemleak allocations skip those memblock_alloc_internal() calls came from kasan_init() given that those early KASAN memory mappings should not reference to other memory. Hence, no kmemleak false positives. kasan_init kasan_map_populate [1] kasan_pgd_populate [2] kasan_pud_populate [3] kasan_pmd_populate [4] kasan_pte_populate [5] kasan_alloc_zeroed_page memblock_alloc_try_nid memblock_alloc_internal kmemleak_alloc [1] for_each_memblock(memory, reg) [2] while (pgdp++, addr = next, addr != end) [3] while (pudp++, addr = next, addr != end && pud_none(READ_ONCE(*pudp))) [4] while (pmdp++, addr = next, addr != end && pmd_none(READ_ONCE(*pmdp))) [5] while (ptep++, addr = next, addr != end && pte_none(READ_ONCE(*ptep))) Link: http://lkml.kernel.org/r/1543442925-17794-1-git-send-email-cai@gmx.usSigned-off-by:Qian Cai <cai@gmx.us> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Oscar Salvador authored
This is a preparation for the next patch. Currently, we only call release_mem_region_adjustable() in __remove_pages if the zone is not ZONE_DEVICE, because resources that belong to HMM/devm are being released by themselves with devm_release_mem_region. Since we do not want to touch any zone/page stuff during the removing of the memory (but during the offlining), we do not want to check for the zone here. So we need another way to tell release_mem_region_adjustable() to not realease the resource in case it belongs to HMM/devm. HMM/devm acquires/releases a resource through devm_request_mem_region/devm_release_mem_region. These resources have the flag IORESOURCE_MEM, while resources acquired by hot-add memory path (register_memory_resource()) contain IORESOURCE_SYSTEM_RAM. So, we can check for this flag in release_mem_region_adjustable, and if the resource does not contain such flag, we know that we are dealing with a HMM/devm resource, so we can back off. Link: http://lkml.kernel.org/r/20181127162005.15833-3-osalvador@suse.deSigned-off-by:
Oscar Salvador <osalvador@suse.de> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by:
-
Oscar Salvador authored
Patch series "Do not touch pages in hot-remove path", v2. This patchset aims for two things: 1) A better definition about offline and hot-remove stage 2) Solving bugs where we can access non-initialized pages during hot-remove operations [2] [3]. This is achieved by moving all page/zone handling to the offline stage, so we do not need to access pages when hot-removing memory. [1] https://patchwork.kernel.org/cover/10691415/ [2] https://patchwork.kernel.org/patch/10547445/ [3] https://www.spinics.net/lists/linux-mm/msg161316.html This patch (of 5): This is a preparation for the following-up patches. The idea of passing the nid is that it will allow us to get rid of the zone parameter afterwards. Link: http://lkml.kernel.org/r/20181127162005.15833-2-osalvador@suse.deSigned-off-by: -
Wei Yang authored
When DEFERRED_STRUCT_PAGE_INIT is configured, only the first section of each node's highest zone is initialized before defer stage. static_init_pgcnt is used to store the number of pages like this: pgdat->static_init_pgcnt = min_t(unsigned long, PAGES_PER_SECTION, pgdat->node_spanned_pages); because we don't want to overflow zone's range. But this is not necessary, since defer_init() is called like this: memmap_init_zone() for pfn in [start_pfn, end_pfn) defer_init(pfn, end_pfn) In case (pgdat->node_spanned_pages < PAGES_PER_SECTION), the loop would stop before calling defer_init(). BTW, comparing PAGES_PER_SECTION with node_spanned_pages is not correct, since nr_initialised is zone based instead of node based. Even node_spanned_pages is bigger than PAGES_PER_SECTION, its highest zone would have pages less than PAGES_PER_SECTION. Link: http://lkml.kernel.org/r/20181122094807.6985-1-richard.weiyang@gmail.comSigned-off-by:Wei Yang <richard.weiyang@gmail.com> Reviewed-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by:
-
Hugh Dickins authored
Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db91 ("sched/wait: Break up long wake list walk") 11a19c7b ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f5 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvilsSigned-off-by:
Hugh Dickins <hughd@google.com> Reported-by:
Baoquan He <bhe@redhat.com> Tested-by:
Andrea Arcangeli <aarcange@redhat.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by:
-
yuzhoujian authored
The current oom report doesn't display victim's memcg context during the global OOM situation. While this information is not strictly needed, it can be really helpful for containerized environments to locate which container has lost a process. Now that we have a single line for the oom context, we can trivially add both the oom memcg (this can be either global_oom or a specific memcg which hits its hard limits) and task_memcg which is the victim's memcg. Below is the single line output in the oom report after this patch. - global oom context information: oom-kill:constraint=<constraint>,nodemask=<nodemask>,cpuset=<cpuset>,mems_allowed=<mems_allowed>,global_oom,task_memcg=<memcg>,task=<comm>,pid=<pid>,uid=<uid> - memcg oom context information: oom-kill:constraint=<constraint>,nodemask=<nodemask>,cpuset=<cpuset>,mems_allowed=<mems_allowed>,oom_memcg=<memcg>,task_memcg=<memcg>,task=<comm>,pid=<pid>,uid=<uid> [penguin-kernel@I-love.SAKURA.ne.jp: use pr_cont() in mem_cgroup_print_oom_context()] Link: http://lkml.kernel.org/r/201812190723.wBJ7NdkN032628@www262.sakura.ne.jp Link: http://lkml.kernel.org/r/1542799799-36184-2-git-send-email-ufo19890607@gmail.comSigned-off-by:
yuzhoujian <yuzhoujian@didichuxing.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
-
yuzhoujian authored
OOM report contains several sections. The first one is the allocation context that has triggered the OOM. Then we have cpuset context followed by the stack trace of the OOM path. The tird one is the OOM memory information. Followed by the current memory state of all system tasks. At last, we will show oom eligible tasks and the information about the chosen oom victim. One thing that makes parsing more awkward than necessary is that we do not have a single and easily parsable line about the oom context. This patch is reorganizing the oom report to 1) who invoked oom and what was the allocation request [ 515.902945] tuned invoked oom-killer: gfp_mask=0x6200ca(GFP_HIGHUSER_MOVABLE), order=0, oom_score_adj=0 2) OOM stack trace [ 515.904273] CPU: 24 PID: 1809 Comm: tuned Not tainted 4.20.0-rc3+ #3 [ 515.905518] Hardware name: Inspur SA5212M4/YZMB-00370-107, BIOS 4.1.10 11/14/2016 [ 515.906821] Call Trace: [ 515.908062] dump_stack+0x5a/0x73 [ 515.909311] dump_header+0x55/0x28c [ 515.914260] oom_kill_process+0x2d8/0x300 [ 515.916708] out_of_memory+0x145/0x4a0 [ 515.917932] __alloc_pages_slowpath+0x7d2/0xa16 [ 515.919157] __alloc_pages_nodemask+0x277/0x290 [ 515.920367] filemap_fault+0x3d0/0x6c0 [ 515.921529] ? filemap_map_pages+0x2b8/0x420 [ 515.922709] ext4_filemap_fault+0x2c/0x40 [ext4] [ 515.923884] __do_fault+0x20/0x80 [ 515.925032] __handle_mm_fault+0xbc0/0xe80 [ 515.926195] handle_mm_fault+0xfa/0x210 [ 515.927357] __do_page_fault+0x233/0x4c0 [ 515.928506] do_page_fault+0x32/0x140 [ 515.929646] ? page_fault+0x8/0x30 [ 515.930770] page_fault+0x1e/0x30 3) OOM memory information [ 515.958093] Mem-Info: [ 515.959647] active_anon:26501758 inactive_anon:1179809 isolated_anon:0 active_file:4402672 inactive_file:483963 isolated_file:1344 unevictable:0 dirty:4886753 writeback:0 unstable:0 slab_reclaimable:148442 slab_unreclaimable:18741 mapped:1347 shmem:1347 pagetables:58669 bounce:0 free:88663 free_pcp:0 free_cma:0 ... 4) current memory state of all system tasks [ 516.079544] [ 744] 0 744 9211 1345 114688 82 0 systemd-journal [ 516.082034] [ 787] 0 787 31764 0 143360 92 0 lvmetad [ 516.084465] [ 792] 0 792 10930 1 110592 208 -1000 systemd-udevd [ 516.086865] [ 1199] 0 1199 13866 0 131072 112 -1000 auditd [ 516.089190] [ 1222] 0 1222 31990 1 110592 157 0 smartd [ 516.091477] [ 1225] 0 1225 4864 85 81920 43 0 irqbalance [ 516.093712] [ 1226] 0 1226 52612 0 258048 426 0 abrtd [ 516.112128] [ 1280] 0 1280 109774 55 299008 400 0 NetworkManager [ 516.113998] [ 1295] 0 1295 28817 37 69632 24 0 ksmtuned [ 516.144596] [ 10718] 0 10718 2622484 1721372 15998976 267219 0 panic [ 516.145792] [ 10719] 0 10719 2622484 1164767 9818112 53576 0 panic [ 516.146977] [ 10720] 0 10720 2622484 1174361 9904128 53709 0 panic [ 516.148163] [ 10721] 0 10721 2622484 1209070 10194944 54824 0 panic [ 516.149329] [ 10722] 0 10722 2622484 1745799 14774272 91138 0 panic 5) oom context (contrains and the chosen victim). oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0-1,task=panic,pid=10737,uid=0 An admin can easily get the full oom context at a single line which makes parsing much easier. Link: http://lkml.kernel.org/r/1542799799-36184-1-git-send-email-ufo19890607@gmail.comSigned-off-by:
-
Alexey Dobriyan authored
and propagate through down the call stack. Link: http://lkml.kernel.org/r/20181124091411.GC10969@avx2Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by:
-
Alexey Dobriyan authored
Those strings are immutable as well. Link: http://lkml.kernel.org/r/20181124090508.GB10877@avx2Signed-off-by:
-
Alexey Dobriyan authored
Those strings are immutable in fact. Link: http://lkml.kernel.org/r/20181124090327.GA10877@avx2Signed-off-by:
-
Mel Gorman authored
An external fragmentation event was previously described as When the page allocator fragments memory, it records the event using the mm_page_alloc_extfrag event. If the fallback_order is smaller than a pageblock order (order-9 on 64-bit x86) then it's considered an event that will cause external fragmentation issues in the future. The kernel reduces the probability of such events by increasing the watermark sizes by calling set_recommended_min_free_kbytes early in the lifetime of the system. This works reasonably well in general but if there are enough sparsely populated pageblocks then the problem can still occur as enough memory is free overall and kswapd stays asleep. This patch introduces a watermark_boost_factor sysctl that allows a zone watermark to be temporarily boosted when an external fragmentation causing events occurs. The boosting will stall allocations that would decrease free memory below the boosted low watermark and kswapd is woken if the calling context allows to reclaim an amount of memory relative to the size of the high watermark and the watermark_boost_factor until the boost is cleared. When kswapd finishes, it wakes kcompactd at the pageblock order to clean some of the pageblocks that may have been affected by the fragmentation event. kswapd avoids any writeback, slab shrinkage and swap from reclaim context during this operation to avoid excessive system disruption in the name of fragmentation avoidance. Care is taken so that kswapd will do normal reclaim work if the system is really low on memory. This was evaluated using the same workloads as "mm, page_alloc: Spread allocations across zones before introducing fragmentation". 1-socket Skylake machine config-global-dhp__workload_thpfioscale XFS (no special madvise) 4 fio threads, 1 THP allocating thread -------------------------------------- 4.20-rc3 extfrag events < order 9: 804694 4.20-rc3+patch: 408912 (49% reduction) 4.20-rc3+patch1-4: 18421 (98% reduction) 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Amean fault-base-1 653.58 ( 0.00%) 652.71 ( 0.13%) Amean fault-huge-1 0.00 ( 0.00%) 178.93 * -99.00%* 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Percentage huge-1 0.00 ( 0.00%) 5.12 ( 100.00%) Note that external fragmentation causing events are massively reduced by this path whether in comparison to the previous kernel or the vanilla kernel. The fault latency for huge pages appears to be increased but that is only because THP allocations were successful with the patch applied. 1-socket Skylake machine global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE) ----------------------------------------------------------------- 4.20-rc3 extfrag events < order 9: 291392 4.20-rc3+patch: 191187 (34% reduction) 4.20-rc3+patch1-4: 13464 (95% reduction) thpfioscale Fault Latencies 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Min fault-base-1 912.00 ( 0.00%) 905.00 ( 0.77%) Min fault-huge-1 127.00 ( 0.00%) 135.00 ( -6.30%) Amean fault-base-1 1467.55 ( 0.00%) 1481.67 ( -0.96%) Amean fault-huge-1 1127.11 ( 0.00%) 1063.88 * 5.61%* 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Percentage huge-1 77.64 ( 0.00%) 83.46 ( 7.49%) As before, massive reduction in external fragmentation events, some jitter on latencies and an increase in THP allocation success rates. 2-socket Haswell machine config-global-dhp__workload_thpfioscale XFS (no special madvise) 4 fio threads, 5 THP allocating threads ---------------------------------------------------------------- 4.20-rc3 extfrag events < order 9: 215698 4.20-rc3+patch: 200210 (7% reduction) 4.20-rc3+patch1-4: 14263 (93% reduction) 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Amean fault-base-5 1346.45 ( 0.00%) 1306.87 ( 2.94%) Amean fault-huge-5 3418.60 ( 0.00%) 1348.94 ( 60.54%) 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Percentage huge-5 0.78 ( 0.00%) 7.91 ( 910.64%) There is a 93% reduction in fragmentation causing events, there is a big reduction in the huge page fault latency and allocation success rate is higher. 2-socket Haswell machine global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE) ----------------------------------------------------------------- 4.20-rc3 extfrag events < order 9: 166352 4.20-rc3+patch: 147463 (11% reduction) 4.20-rc3+patch1-4: 11095 (93% reduction) thpfioscale Fault Latencies 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Amean fault-base-5 6217.43 ( 0.00%) 7419.67 * -19.34%* Amean fault-huge-5 3163.33 ( 0.00%) 3263.80 ( -3.18%) 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Percentage huge-5 95.14 ( 0.00%) 87.98 ( -7.53%) There is a large reduction in fragmentation events with some jitter around the latencies and success rates. As before, the high THP allocation success rate does mean the system is under a lot of pressure. However, as the fragmentation events are reduced, it would be expected that the long-term allocation success rate would be higher. Link: http://lkml.kernel.org/r/20181123114528.28802-5-mgorman@techsingularity.netSigned-off-by:Mel Gorman <mgorman@techsingularity.net> Acked-by:
-
Mel Gorman authored
This is a preparation patch that copies the GFP flag __GFP_KSWAPD_RECLAIM into alloc_flags. This is a preparation patch only that avoids having to pass gfp_mask through a long callchain in a future patch. Note that the setting in the fast path happens in alloc_flags_nofragment() and it may be claimed that this has nothing to do with ALLOC_NO_FRAGMENT. That's true in this patch but is not true later so it's done now for easier review to show where the flag needs to be recorded. No functional change. [mgorman@techsingularity.net: ALLOC_KSWAPD flag needs to be applied in the !CONFIG_ZONE_DMA32 case] Link: http://lkml.kernel.org/r/20181126143503.GO23260@techsingularity.net Link: http://lkml.kernel.org/r/20181123114528.28802-4-mgorman@techsingularity.netSigned-off-by:
-
Mel Gorman authored
This is a preparation patch only, no functional change. Link: http://lkml.kernel.org/r/20181123114528.28802-3-mgorman@techsingularity.netSigned-off-by:
-
Mel Gorman authored
Patch series "Fragmentation avoidance improvements", v5. It has been noted before that fragmentation avoidance (aka anti-fragmentation) is not perfect. Given sufficient time or an adverse workload, memory gets fragmented and the long-term success of high-order allocations degrades. This series defines an adverse workload, a definition of external fragmentation events (including serious) ones and a series that reduces the level of those fragmentation events. The details of the workload and the consequences are described in more detail in the changelogs. However, from patch 1, this is a high-level summary of the adverse workload. The exact details are found in the mmtests implementation. The broad details of the workload are as follows; 1. Create an XFS filesystem (not specified in the configuration but done as part of the testing for this patch) 2. Start 4 fio threads that write a number of 64K files inefficiently. Inefficiently means that files are created on first access and not created in advance (fio parameterr create_on_open=1) and fallocate is not used (fallocate=none). With multiple IO issuers this creates a mix of slab and page cache allocations over time. The total size of the files is 150% physical memory so that the slabs and page cache pages get mixed 3. Warm up a number of fio read-only threads accessing the same files created in step 2. This part runs for the same length of time it took to create the files. It'll fault back in old data and further interleave slab and page cache allocations. As it's now low on memory due to step 2, fragmentation occurs as pageblocks get stolen. 4. While step 3 is still running, start a process that tries to allocate 75% of memory as huge pages with a number of threads. The number of threads is based on a (NR_CPUS_SOCKET - NR_FIO_THREADS)/4 to avoid THP threads contending with fio, any other threads or forcing cross-NUMA scheduling. Note that the test has not been used on a machine with less than 8 cores. The benchmark records whether huge pages were allocated and what the fault latency was in microseconds 5. Measure the number of events potentially causing external fragmentation, the fault latency and the huge page allocation success rate. 6. Cleanup Overall the series reduces external fragmentation causing events by over 94% on 1 and 2 socket machines, which in turn impacts high-order allocation success rates over the long term. There are differences in latencies and high-order allocation success rates. Latencies are a mixed bag as they are vulnerable to exact system state and whether allocations succeeded so they are treated as a secondary metric. Patch 1 uses lower zones if they are populated and have free memory instead of fragmenting a higher zone. It's special cased to handle a Normal->DMA32 fallback with the reasons explained in the changelog. Patch 2-4 boosts watermarks temporarily when an external fragmentation event occurs. kswapd wakes to reclaim a small amount of old memory and then wakes kcompactd on completion to recover the system slightly. This introduces some overhead in the slowpath. The level of boosting can be tuned or disabled depending on the tolerance for fragmentation vs allocation latency. Patch 5 stalls some movable allocation requests to let kswapd from patch 4 make some progress. The duration of the stalls is very low but it is possible to tune the system to avoid fragmentation events if larger stalls can be tolerated. The bulk of the improvement in fragmentation avoidance is from patches 1-4 but patch 5 can deal with a rare corner case and provides the option of tuning a system for THP allocation success rates in exchange for some stalls to control fragmentation. This patch (of 5): The page allocator zone lists are iterated based on the watermarks of each zone which does not take anti-fragmentation into account. On x86, node 0 may have multiple zones while other nodes have one zone. A consequence is that tasks running on node 0 may fragment ZONE_NORMAL even though ZONE_DMA32 has plenty of free memory. This patch special cases the allocator fast path such that it'll try an allocation from a lower local zone before fragmenting a higher zone. In this case, stealing of pageblocks or orders larger than a pageblock are still allowed in the fast path as they are uninteresting from a fragmentation point of view. This was evaluated using a benchmark designed to fragment memory before attempting THP allocations. It's implemented in mmtests as the following configurations configs/config-global-dhp__workload_thpfioscale configs/config-global-dhp__workload_thpfioscale-defrag configs/config-global-dhp__workload_thpfioscale-madvhugepage e.g. from mmtests ./run-mmtests.sh --run-monitor --config configs/config-global-dhp__workload_thpfioscale test-run-1 The broad details of the workload are as follows; 1. Create an XFS filesystem (not specified in the configuration but done as part of the testing for this patch). 2. Start 4 fio threads that write a number of 64K files inefficiently. Inefficiently means that files are created on first access and not created in advance (fio parameter create_on_open=1) and fallocate is not used (fallocate=none). With multiple IO issuers this creates a mix of slab and page cache allocations over time. The total size of the files is 150% physical memory so that the slabs and page cache pages get mixed. 3. Warm up a number of fio read-only processes accessing the same files created in step 2. This part runs for the same length of time it took to create the files. It'll refault old data and further interleave slab and page cache allocations. As it's now low on memory due to step 2, fragmentation occurs as pageblocks get stolen. 4. While step 3 is still running, start a process that tries to allocate 75% of memory as huge pages with a number of threads. The number of threads is based on a (NR_CPUS_SOCKET - NR_FIO_THREADS)/4 to avoid THP threads contending with fio, any other threads or forcing cross-NUMA scheduling. Note that the test has not been used on a machine with less than 8 cores. The benchmark records whether huge pages were allocated and what the fault latency was in microseconds. 5. Measure the number of events potentially causing external fragmentation, the fault latency and the huge page allocation success rate. 6. Cleanup the test files. Note that due to the use of IO and page cache that this benchmark is not suitable for running on large machines where the time to fragment memory may be excessive. Also note that while this is one mix that generates fragmentation that it's not the only mix that generates fragmentation. Differences in workload that are more slab-intensive or whether SLUB is used with high-order pages may yield different results. When the page allocator fragments memory, it records the event using the mm_page_alloc_extfrag ftrace event. If the fallback_order is smaller than a pageblock order (order-9 on 64-bit x86) then it's considered to be an "external fragmentation event" that may cause issues in the future. Hence, the primary metric here is the number of external fragmentation events that occur with order < 9. The secondary metric is allocation latency and huge page allocation success rates but note that differences in latencies and what the success rate also can affect the number of external fragmentation event which is why it's a secondary metric. 1-socket Skylake machine config-global-dhp__workload_thpfioscale XFS (no special madvise) 4 fio threads, 1 THP allocating thread -------------------------------------- 4.20-rc3 extfrag events < order 9: 804694 4.20-rc3+patch: 408912 (49% reduction) thpfioscale Fault Latencies 4.20.0-rc3 4.20.0-rc3 vanilla lowzone-v5r8 Amean fault-base-1 662.92 ( 0.00%) 653.58 * 1.41%* Amean fault-huge-1 0.00 ( 0.00%) 0.00 ( 0.00%) 4.20.0-rc3 4.20.0-rc3 vanilla lowzone-v5r8 Percentage huge-1 0.00 ( 0.00%) 0.00 ( 0.00%) Fault latencies are slightly reduced while allocation success rates remain at zero as this configuration does not make any special effort to allocate THP and fio is heavily active at the time and either filling memory or keeping pages resident. However, a 49% reduction of serious fragmentation events reduces the changes of external fragmentation being a problem in the future. Vlastimil asked during review for a breakdown of the allocation types that are falling back. vanilla 3816 MIGRATE_UNMOVABLE 800845 MIGRATE_MOVABLE 33 MIGRATE_UNRECLAIMABLE patch 735 MIGRATE_UNMOVABLE 408135 MIGRATE_MOVABLE 42 MIGRATE_UNRECLAIMABLE The majority of the fallbacks are due to movable allocations and this is consistent for the workload throughout the series so will not be presented again as the primary source of fallbacks are movable allocations. Movable fallbacks are sometimes considered "ok" to fallback because they can be migrated. The problem is that they can fill an unmovable/reclaimable pageblock causing those allocations to fallback later and polluting pageblocks with pages that cannot move. If there is a movable fallback, it is pretty much guaranteed to affect an unmovable/reclaimable pageblock and while it might not be enough to actually cause a unmovable/reclaimable fallback in the future, we cannot know that in advance so the patch takes the only option available to it. Hence, it's important to control them. This point is also consistent throughout the series and will not be repeated. 1-socket Skylake machine global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE) ----------------------------------------------------------------- 4.20-rc3 extfrag events < order 9: 291392 4.20-rc3+patch: 191187 (34% reduction) thpfioscale Fault Latencies 4.20.0-rc3 4.20.0-rc3 vanilla lowzone-v5r8 Amean fault-base-1 1495.14 ( 0.00%) 1467.55 ( 1.85%) Amean fault-huge-1 1098.48 ( 0.00%) 1127.11 ( -2.61%) thpfioscale Percentage Faults Huge 4.20.0-rc3 4.20.0-rc3 vanilla lowzone-v5r8 Percentage huge-1 78.57 ( 0.00%) 77.64 ( -1.18%) Fragmentation events were reduced quite a bit although this is known to be a little variable. The latencies and allocation success rates are similar but they were already quite high. 2-socket Haswell machine config-global-dhp__workload_thpfioscale XFS (no special madvise) 4 fio threads, 5 THP allocating threads ---------------------------------------------------------------- 4.20-rc3 extfrag events < order 9: 215698 4.20-rc3+patch: 200210 (7% reduction) thpfioscale Fault Latencies 4.20.0-rc3 4.20.0-rc3 vanilla lowzone-v5r8 Amean fault-base-5 1350.05 ( 0.00%) 1346.45 ( 0.27%) Amean fault-huge-5 4181.01 ( 0.00%) 3418.60 ( 18.24%) 4.20.0-rc3 4.20.0-rc3 vanilla lowzone-v5r8 Percentage huge-5 1.15 ( 0.00%) 0.78 ( -31.88%) The reduction of external fragmentation events is slight and this is partially due to the removal of __GFP_THISNODE in commit ac5b2c18 ("mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings") as THP allocations can now spill over to remote nodes instead of fragmenting local memory. 2-socket Haswell machine global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE) ----------------------------------------------------------------- 4.20-rc3 extfrag events < order 9: 166352 4.20-rc3+patch: 147463 (11% reduction) thpfioscale Fault Latencies 4.20.0-rc3 4.20.0-rc3 vanilla lowzone-v5r8 Amean fault-base-5 6138.97 ( 0.00%) 6217.43 ( -1.28%) Amean fault-huge-5 2294.28 ( 0.00%) 3163.33 * -37.88%* thpfioscale Percentage Faults Huge 4.20.0-rc3 4.20.0-rc3 vanilla lowzone-v5r8 Percentage huge-5 96.82 ( 0.00%) 95.14 ( -1.74%) There was a slight reduction in external fragmentation events although the latencies were higher. The allocation success rate is high enough that the system is struggling and there is quite a lot of parallel reclaim and compaction activity. There is also a certain degree of luck on whether processes start on node 0 or not for this patch but the relevance is reduced later in the series. Overall, the patch reduces the number of external fragmentation causing events so the success of THP over long periods of time would be improved for this adverse workload. Link: http://lkml.kernel.org/r/20181123114528.28802-2-mgorman@techsingularity.netSigned-off-by: -
David Hildenbrand authored
Userspace should always be in charge of how to online memory and if memory should be onlined automatically in the kernel. Let's drop the parameter to overwrite this - XEN passes memhp_auto_online, just like add_memory(), so we can directly use that instead internally. Link: http://lkml.kernel.org/r/20181123123740.27652-1-david@redhat.comSigned-off-by:
Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Wei Yang authored
In cb5e39b8 ("drivers: base: refactor add_memory_section() to add_memory_block()"), add_memory_block() is introduced, which is only invoked in memory_dev_init(). When combining these two loops in memory_dev_init() and add_memory_block(), they looks like this: for (i = 0; i < NR_MEM_SECTIONS; i += sections_per_block) for (j = i; (j < i + sections_per_block) && j < NR_MEM_SECTIONS; j++) Since it is sure the (i < NR_MEM_SECTIONS) and j sits in its own memory block, the check of (j < NR_MEM_SECTIONS) is not necessary. This patch just removes this check. Link: http://lkml.kernel.org/r/20181123222811.18216-1-richard.weiyang@gmail.comSigned-off-by:
-
Mike Rapoport authored
__memblock_free_early() is only used by the convenience wrappers, so essentially we wrap a call to memblock_free() twice. Replace calls of __memblock_free_early() with calls to memblock_free() and drop the former. Link: http://lkml.kernel.org/r/20181125102940.GE28634@rapoport-lnxSigned-off-by:
Mike Rapoport <rppt@linux.ibm.com> Reviewed-by:
-
Wentao Wang authored
Link: http://lkml.kernel.org/r/C8ECE1B7A767434691FEEFA3A01765D72AFB8E78@MX203CL03.corp.emc.comSigned-off-by:
Wentao Wang <witallwang@gmail.com> Reviewed-by:
-
Aaron Lu authored
There are multiple places of freeing a page, they all do the same things so a common function can be used to reduce code duplicate. It also avoids bug fixed in one function but left in another. Link: http://lkml.kernel.org/r/20181119134834.17765-3-aaron.lu@intel.comSigned-off-by:
Aaron Lu <aaron.lu@intel.com> Acked-by:
-
Aaron Lu authored
page_frag_free() calls __free_pages_ok() to free the page back to Buddy. This is OK for high order page, but for order-0 pages, it misses the optimization opportunity of using Per-Cpu-Pages and can cause zone lock contention when called frequently. Pawel Staszewski recently shared his result of 'how Linux kernel handles normal traffic'[1] and from perf data, Jesper Dangaard Brouer found the lock contention comes from page allocator: mlx5e_poll_tx_cq | --16.34%--napi_consume_skb | |--12.65%--__free_pages_ok | | | --11.86%--free_one_page | | | |--10.10%--queued_spin_lock_slowpath | | | --0.65%--_raw_spin_lock | |--1.55%--page_frag_free | --1.44%--skb_release_data Jesper explained how it happened: mlx5 driver RX-page recycle mechanism is not effective in this workload and pages have to go through the page allocator. The lock contention happens during mlx5 DMA TX completion cycle. And the page allocator cannot keep up at these speeds.[2] I thought that __free_pages_ok() are mostly freeing high order pages and thought this is an lock contention for high order pages but Jesper explained in detail that __free_pages_ok() here are actually freeing order-0 pages because mlx5 is using order-0 pages to satisfy its page pool allocation request.[3] The free path as pointed out by Jesper is: skb_free_head() -> skb_free_frag() -> page_frag_free() And the pages being freed on this path are order-0 pages. Fix this by doing similar things as in __page_frag_cache_drain() - send the being freed page to PCP if it's an order-0 page, or directly to Buddy if it is a high order page. With this change, Paweł hasn't noticed lock contention yet in his workload and Jesper has noticed a 7% performance improvement using a micro benchmark and lock contention is gone. Ilias' test on a 'low' speed 1Gbit interface on an cortex-a53 shows ~11% performance boost testing with 64byte packets and __free_pages_ok() disappeared from perf top. [1]: https://www.spinics.net/lists/netdev/msg531362.html [2]: https://www.spinics.net/lists/netdev/msg531421.html [3]: https://www.spinics.net/lists/netdev/msg531556.html [akpm@linux-foundation.org: add comment] Link: http://lkml.kernel.org/r/20181120014544.GB10657@intel.comSigned-off-by:Pawel Staszewski <pstaszewski@itcare.pl> Analysed-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Tested-by:
Tariq Toukan <tariqt@mellanox.com> Acked-by:
Pankaj gupta <pagupta@redhat.com> Signed-off-by:
-
Dan Williams authored
At Maintainer Summit, Greg brought up a topic I proposed around EXPORT_SYMBOL_GPL usage. The motivation was considerations for when EXPORT_SYMBOL_GPL is warranted and the criteria for taking the exceptional step of reclassifying an existing export. Specifically, I wanted to make the case that although the line is fuzzy and hard to specify in abstract terms, it is nonetheless clear that devm_memremap_pages() and HMM (Heterogeneous Memory Management) have crossed it. The devm_memremap_pages() facility should have been EXPORT_SYMBOL_GPL from the beginning, and HMM as a derivative of that functionality should have naturally picked up that designation as well. Contrary to typical rules, the HMM infrastructure was merged upstream with zero in-tree consumers. There was a promise at the time that those users would be merged "soon", but it has been over a year with no drivers arriving. While the Nouveau driver is about to belatedly make good on that promise it is clear that HMM was targeted first and foremost at an out-of-tree consumer. HMM is derived from devm_memremap_pages(), a facility Christoph and I spearheaded to support persistent memory. It combines a device lifetime model with a dynamically created 'struct page' / memmap array for any physical address range. It enables coordination and control of the many code paths in the kernel built to interact with memory via 'struct page' objects. With HMM the integration goes even deeper by allowing device drivers to hook and manipulate page fault and page free events. One interpretation of when EXPORT_SYMBOL is suitable is when it is exporting stable and generic leaf functionality. The devm_memremap_pages() facility continues to see expanding use cases, peer-to-peer DMA being the most recent, with no clear end date when it will stop attracting reworks and semantic changes. It is not suitable to export devm_memremap_pages() as a stable 3rd party driver API due to the fact that it is still changing and manipulates core behavior. Moreover, it is not in the best interest of the long term development of the core memory management subsystem to permit any external driver to effectively define its own system-wide memory management policies with no encouragement to engage with upstream. I am also concerned that HMM was designed in a way to minimize further engagement with the core-MM. That, with these hooks in place, device-drivers are free to implement their own policies without much consideration for whether and how the core-MM could grow to meet that need. Going forward not only should HMM be EXPORT_SYMBOL_GPL, but the core-MM should be allowed the opportunity and stimulus to change and address these new use cases as first class functionality. Original changelog: hmm_devmem_add(), and hmm_devmem_add_resource() duplicated devm_memremap_pages() and are now simple now wrappers around the core facility to inject a dev_pagemap instance into the global pgmap_radix and hook page-idle events. The devm_memremap_pages() interface is base infrastructure for HMM. HMM has more and deeper ties into the kernel memory management implementation than base ZONE_DEVICE which is itself a EXPORT_SYMBOL_GPL facility. Originally, the HMM page structure creation routines copied the devm_memremap_pages() code and reused ZONE_DEVICE. A cleanup to unify the implementations was discussed during the initial review: http://lkml.iu.edu/hypermail/linux/kernel/1701.2/00812.html Recent work to extend devm_memremap_pages() for the peer-to-peer-DMA facility enabled this cleanup to move forward. In addition to the integration with devm_memremap_pages() HMM depends on other GPL-only symbols: mmu_notifier_unregister_no_release percpu_ref region_intersects __class_create It goes further to consume / indirectly expose functionality that is not exported to any other driver: alloc_pages_vma walk_page_range HMM is derived from devm_memremap_pages(), and extends deep core-kernel fundamentals. Similar to devm_memremap_pages(), mark its entry points EXPORT_SYMBOL_GPL(). [logang@deltatee.com: PCI/P2PDMA: match interface changes to devm_memremap_pages()] Link: http://lkml.kernel.org/r/20181130225911.2900-1-logang@deltatee.com Link: http://lkml.kernel.org/r/154275560565.76910.15919297436557795278.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com>, Cc: Michal Hocko <mhocko@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Dan Williams authored
Commit e8d51348 ("memremap: change devm_memremap_pages interface to use struct dev_pagemap") refactored devm_memremap_pages() to allow a dev_pagemap instance to be supplied. Passing in a dev_pagemap interface simplifies the design of pgmap type drivers in that they can rely on container_of() to lookup any private data associated with the given dev_pagemap instance. In addition to the cleanups this also gives hmm users multi-order-radix improvements that arrived with commit ab1b597e "mm, devm_memremap_pages: use multi-order radix for ZONE_DEVICE lookups" As part of the conversion to the devm_memremap_pages() method of handling the percpu_ref relative to when pages are put, the percpu_ref completion needs to move to hmm_devmem_ref_exit(). See 71389703 ("mm, zone_device: Replace {get, put}_zone_device_page...") for details. Link: http://lkml.kernel.org/r/154275560053.76910.10870962637383152392.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Jérôme Glisse <jglisse@redhat.com> Acked-by:
Balbir Singh <bsingharora@gmail.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Dan Williams authored
devm semantics arrange for resources to be torn down when device-driver-probe fails or when device-driver-release completes. Similar to devm_memremap_pages() there is no need to support an explicit remove operation when the users properly adhere to devm semantics. Note that devm_kzalloc() automatically handles allocating node-local memory. Link: http://lkml.kernel.org/r/154275559545.76910.9186690723515469051.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
-
Dan Williams authored
In preparation for consolidating all ZONE_DEVICE enabling via devm_memremap_pages(), teach it how to handle the constraints of MEMORY_DEVICE_PRIVATE ranges. [jglisse@redhat.com: call move_pfn_range_to_zone for MEMORY_DEVICE_PRIVATE] Link: http://lkml.kernel.org/r/154275559036.76910.12434636179931292607.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
-
Dan Williams authored
The last step before devm_memremap_pages() returns success is to allocate a release action, devm_memremap_pages_release(), to tear the entire setup down. However, the result from devm_add_action() is not checked. Checking the error from devm_add_action() is not enough. The api currently relies on the fact that the percpu_ref it is using is killed by the time the devm_memremap_pages_release() is run. Rather than continue this awkward situation, offload the responsibility of killing the percpu_ref to devm_memremap_pages_release() directly. This allows devm_memremap_pages() to do the right thing relative to init failures and shutdown. Without this change we could fail to register the teardown of devm_memremap_pages(). The likelihood of hitting this failure is tiny as small memory allocations almost always succeed. However, the impact of the failure is large given any future reconfiguration, or disable/enable, of an nvdimm namespace will fail forever as subsequent calls to devm_memremap_pages() will fail to setup the pgmap_radix since there will be stale entries for the physical address range. An argument could be made to require that the ->kill() operation be set in the @pgmap arg rather than passed in separately. However, it helps code readability, tracking the lifetime of a given instance, to be able to grep the kill routine directly at the devm_memremap_pages() call site. Link: http://lkml.kernel.org/r/154275558526.76910.7535251937849268605.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
-
Dan Williams authored
Given the fact that devm_memremap_pages() requires a percpu_ref that is torn down by devm_memremap_pages_release() the current support for mapping RAM is broken. Support for remapping "System RAM" has been broken since the beginning and there is no existing user of this this code path, so just kill the support and make it an explicit error. This cleanup also simplifies a follow-on patch to fix the error path when setting a devm release action for devm_memremap_pages_release() fails. Link: http://lkml.kernel.org/r/154275557997.76910.14689813630968180480.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
-
Dan Williams authored
devm_memremap_pages() is a facility that can create struct page entries for any arbitrary range and give drivers the ability to subvert core aspects of page management. Specifically the facility is tightly integrated with the kernel's memory hotplug functionality. It injects an altmap argument deep into the architecture specific vmemmap implementation to allow allocating from specific reserved pages, and it has Linux specific assumptions about page structure reference counting relative to get_user_pages() and get_user_pages_fast(). It was an oversight and a mistake that this was not marked EXPORT_SYMBOL_GPL from the outset. Again, devm_memremap_pagex() exposes and relies upon core kernel internal assumptions and will continue to evolve along with 'struct page', memory hotplug, and support for new memory types / topologies. Only an in-kernel GPL-only driver is expected to keep up with this ongoing evolution. This interface, and functionality derived from this interface, is not suitable for kernel-external drivers. Link: http://lkml.kernel.org/r/154275557457.76910.16923571232582744134.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
-
Huang Shijie authored
In the enum migratetype definition, MIGRATE_MOVABLE is before MIGRATE_RECLAIMABLE. Change the order of them to match the enumeration's order. Link: http://lkml.kernel.org/r/20181121085821.3442-1-sjhuang@iluvatar.aiSigned-off-by:
Huang Shijie <sjhuang@iluvatar.ai> Reviewed-by:
-
Eric Biggers authored
Reference counters should use refcount_t rather than atomic_t, since the refcount_t implementation can prevent overflows, reducing the exploitability of reference leak bugs. userfaultfd_ctx::refcount is a reference counter with the usual semantics, so convert it to refcount_t. Note: I replaced the BUG() on incrementing a 0 refcount with just refcount_inc(), since part of the semantics of refcount_t is that that incrementing a 0 refcount is not allowed; with CONFIG_REFCOUNT_FULL, refcount_inc() already checks for it and warns. Link: http://lkml.kernel.org/r/20181115003916.63381-1-ebiggers@kernel.orgSigned-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
-
Aaron Lu authored
Since a2468cc9 ("swap: choose swap device according to numa node"), avail_lists field of swap_info_struct is changed to an array with MAX_NUMNODES elements. This made swap_info_struct size increased to 40KiB and needs an order-4 page to hold it. This is not optimal in that: 1 Most systems have way less than MAX_NUMNODES(1024) nodes so it is a waste of memory; 2 It could cause swapon failure if the swap device is swapped on after system has been running for a while, due to no order-4 page is available as pointed out by Vasily Averin. Solve the above two issues by using nr_node_ids(which is the actual possible node number the running system has) for avail_lists instead of MAX_NUMNODES. nr_node_ids is unknown at compile time so can't be directly used when declaring this array. What I did here is to declare avail_lists as zero element array and allocate space for it when allocating space for swap_info_struct. The reason why keep using array but not pointer is plist_for_each_entry needs the field to be part of the struct, so pointer will not work. This patch is on top of Vasily Averin's fix commit. I think the use of kvzalloc for swap_info_struct is still needed in case nr_node_ids is really big on some systems. Link: http://lkml.kernel.org/r/20181115083847.GA11129@intel.comSigned-off-by:
-
Wei Yang authored
Commit fa5e084e ("vmscan: do not unconditionally treat zones that fail zone_reclaim() as full") changed the return value of node_reclaim(). The original return value 0 means NODE_RECLAIM_SOME after this commit. While the return value of node_reclaim() when CONFIG_NUMA is n is not changed. This will leads to call zone_watermark_ok() again. This patch fixes the return value by adjusting to NODE_RECLAIM_NOSCAN. Since node_reclaim() is only called in page_alloc.c, move it to mm/internal.h. Link: http://lkml.kernel.org/r/20181113080436.22078-1-richard.weiyang@gmail.comSigned-off-by:
Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
Arun KS authored
Now that totalram_pages and managed_pages are atomic varibles, no need of managed_page_count spinlock. The lock had really a weak consistency guarantee. It hasn't been used for anything but the update but no reader actually cares about all the values being updated to be in sync. Link: http://lkml.kernel.org/r/1542090790-21750-5-git-send-email-arunks@codeaurora.orgSigned-off-by:
Arun KS <arunks@codeaurora.org> Reviewed-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by:
-
Arun KS authored
totalram_pages and totalhigh_pages are made static inline function. Main motivation was that managed_page_count_lock handling was complicating things. It was discussed in length here, https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes better to remove the lock and convert variables to atomic, with preventing poteintial store-to-read tearing as a bonus. [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.orgSigned-off-by:
-
Arun KS authored
totalram_pages, zone->managed_pages and totalhigh_pages updates are protected by managed_page_count_lock, but readers never care about it. Convert these variables to atomic to avoid readers potentially seeing a store tear. This patch converts zone->managed_pages. Subsequent patches will convert totalram_panges, totalhigh_pages and eventually managed_page_count_lock will be removed. Main motivation was that managed_page_count_lock handling was complicating things. It was discussed in length here, https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes better to remove the lock and convert variables to atomic, with preventing poteintial store-to-read tearing as a bonus. Link: http://lkml.kernel.org/r/1542090790-21750-3-git-send-email-arunks@codeaurora.orgSigned-off-by:
-
Arun KS authored
Patch series "mm: convert totalram_pages, totalhigh_pages and managed pages to atomic", v5. This series converts totalram_pages, totalhigh_pages and zone->managed_pages to atomic variables. totalram_pages, zone->managed_pages and totalhigh_pages updates are protected by managed_page_count_lock, but readers never care about it. Convert these variables to atomic to avoid readers potentially seeing a store tear. Main motivation was that managed_page_count_lock handling was complicating things. It was discussed in length here, https://lore.kernel.org/patchwork/patch/995739/#1181785 It seemes better to remove the lock and convert variables to atomic. With the change, preventing poteintial store-to-read tearing comes as a bonus. This patch (of 4): This is in preparation to a later patch which converts totalram_pages and zone->managed_pages to atomic variables. Please note that re-reading the value might lead to a different value and as such it could lead to unexpected behavior. There are no known bugs as a result of the current code but it is better to prevent from them in principle. Link: http://lkml.kernel.org/r/1542090790-21750-2-git-send-email-arunks@codeaurora.orgSigned-off-by:
-
